Cisco WAN :: 881G Cellular Interface Working With R-uim Cards?
Jan 6, 2012Can Cisco 881G cellular interface (Modem Firmware Version = K2_0_7_19AP C:/WS/FW) work with r-uim cards? I can't find correct answer in documentation .
View 2 Replies
ADVERTISEMENT
Cisco WAN :: Configuring 881G-K9 Cellular Interface
Jun 3, 2013I have an issue regarding using cellular interface on cisco 881G. The 3G module is Aircard 504. SIMcard is working on other devices, it have obtain IP address from mobile operator. But on cisco881G it doesnt work.
Here is config:
cellular 0 gsm profile create 1 m2m
chat-script 3G "" "ATDT*98*4#" TIMEOUT 30 CONNECT
interface Cellular0
[Code].....
Cisco WAN :: 881G DHCP Configure To Use Both Cellular Interface
Jan 22, 2013I would like to configure the 881G to use both the cellular interface and Fe4 WAN port for internet connectivity.Interface Fe4 is connected to an ADSL router.
I have configure each interface with a default route and weighting:
ip route 0.0.0.0 0.0.0.0 Dialer0 200
ip route 0.0.0.0 0.0.0.0 FastEthernet 4 100
I need to configure Fe4 to get an address as a DHCP client:
interface FastEthernet4
ip address dhcp
no shut
duplex auto
speed auto
How do I remove Fe4 from VLAN1? There is some existing config around VLAN 1:
interface Vlan1
ip address 10.73.0.1 255.255.255.0
ip helper-address 192.168.140.13
ip tcp adjust-mss 1400
no autostate
ip sla 100
icmp-echo 10.64.4.15 source-interface Vlan1
tag 3G Keepalive
frequency 10
Then I guess I need to adjust my Internet-IN ACL to allow broadcasts and UDP 67 and 68?
Cisco WAN :: Configuring Cellular 0 On 881G With Embedded 3G Modem
Jun 5, 2012 I have a Cisco 881G with PCEX-HSPA-3G card for which I have successfully configured for internet. As the above one has come to end of life, we got the replacement 881G with embedded 3G modem.
I can't get Cellular 0 to use ppp encapsulation:
Router(config-if)#encapsulation ppp
Cellular0: Only SLIP encapsulation supported
Router(config-if)#
[Code].....
Cisco WAN :: 819 - Cellular 0 Goes Down When Interface Goes Up
Jan 25, 2013I've been able to activate and configure the Cisco 819 router to connect to Verizon via interface Cellular 0 but when I connect a laptop to the router, int Cell 0 goes down.
Here's a snippet of what happens after I connect a laptop:
rt1#ping 8.8.8.8
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds:
[Code].....
Cisco Infrastructure :: 881 K9 Router With Interface Cellular
Nov 2, 2011I have three routers 811 (independent), and the interface cellular 0 resets in all three.
View 3 Replies View RelatedCisco WAN :: 819 Cellular Interface Drops When FastEthernet Comes Up
Apr 25, 2013We're seeing a strange issue with a Cisco 819 that we're testing out. We are able to ping out over the Cellular interface just fine, but as soon as we plug a device into one of the FastEthernet ports we immediately drop the cell connection. The Cell interface then continues to bounce until we unplug the device. We are intending to setup a VPN tunnel, but we've even stripped all that out for the sake of troubleshooting.
Current configuration : 2832 bytes
!
version 15.2
[Code].....
Cisco :: Remote Vpn Client To Router With Cellular Interface?
Apr 28, 2011I'm having extreme issues in getting my vpn client to connect to a cisco router with a hwic-3g-hspa cellular interface
I have tested the config remotely by traversing the tunnel I have setup with a cisco vpn client and the client does connect, however when out on the road it doesn't respond, I'm litterally hitting my head against a brick here, everything just seem right I can't explain it.
I have done debugs and there is no sign of life, its as though when the vpn client connects to the router its not responding any way here is my config for the vpn clients part that is.
aaa new-model
!
!
aaa group server radius vpn-client-server-group-1
[Code].....
Cisco WAN :: HWIC-3G-GSM Configuration / The Cellular Interface Doesn't Get IP From ISP
Apr 6, 2010I have problem with HWIC-3G-GSM configuration. The cellular interface doesn't get IP from ISP.The configured profile is always inactive.cellular 0/2/0 gsm profile create 1 m2m.plusgsm.pl chap plusgsm plusgsm
View 3 Replies View RelatedCisco WAN :: 881g Dual NAT Failover Not Working
Mar 24, 2011Below is the config has done on my 881g but the dual NAT failover is not working.I have a easy vpn over NAT (easy vpn firewall: 10.10.10.2 behind the router).
1. After completed the config, I shut down the FastEthernet4, cleared the nat translations, found that nat translations are happening on to Cellular0 with error ( Incomplete ESP translations: 0 esp_conn=0x85A91FF0, hanging off nat entry 0x85A7D1D0)But still the easy vpn is not up as I am not able to ping the remote devices.
2. If I reboot the router then the nat translations are happening with no above error and easy vpn is up and I am able to ping the remote servers. Below is the config, what needs to be done to achieve the NAT failover and easy VPN up.
interface FastEthernet4 bandwidth 2048 ip address 206.206.206.2 255.255.255.240 ip flow ingress ip nat outside ip virtual-reassembly duplex auto speed auto interface Cellular0 ip address negotiated ip nat outside ip virtual-reassembly encapsulation ppp dialer in-band dialer string gsm dialer-group 1 async mode interactive ppp chap hostname. [code]
Cabling / Cards :: LAN Not Working?
Sep 17, 2012i am using win7 64 bit on dell n5110 and my lan is not working properly. it wont even detect the cable . when i plug in the cable its like nothing happened. but when i uninstall and reinstall the driver, it sometimes resolves the issue. but i have to do this every time.
View 3 Replies View RelatedCabling / Cards :: Ethernet Port Not Working
Mar 5, 2012I was having a cleanup of the desk and unplugged the cable shortly, and after plugging it back in it could no longer find any connection. The only way I seem to be able to get connected to the internet now is to run a cable to my ethernet switch, and then onwards to my computer itself. Even when doing this the net seems to be very slow, won't connect through Chrome etc or just flat out won't connect.
View 5 Replies View RelatedCabling / Cards :: Network Card Stopped Working?
Jun 29, 2012I have install a new driver for the network card but the card stops working?
View 1 Replies View RelatedCabling / Cards :: CAT6 Cables Suddenly Not Working?
Dec 11, 2012Recently encountered this problem where one cable suddenly not working properly.We are using 568B as our standard cabling here, lines 1,2,4,and 5 are working as of checking,but lines 3,6,7, and 8 are not. Before it was working flawless. The cable are buried underground inclosed in a pvc hose.
View 11 Replies View RelatedCabling / Cards :: CAT5 Ethernet Cables Not Working
Jul 14, 2011I live in a frat and I am currently researching how to design and configure the most efficient network for the house. However, one of the other big problems we have is connectivity of our ethernet cables. We have an IT room with 2 switches that feed ethernet cables to all parts of the house and connect to an ethernet box in the wall where we can simply wire in our internet connection. We have wireless routers too but to keep the bandwidth usage across the WAP's I want to let people use the wired connections. However, many of the connection in the house do not work at all. I plug in my laptop to the wall jack and it gives me the No Internet Access notice. I don't understand why it works in some rooms and not others. All jacks seem to go into the same switches at the other end so I cannot figure out what the problem could be.
View 2 Replies View RelatedCabling / Cards :: Cat5 Not Working Past 25Ft
May 22, 2012We are setting up a network in our new house. We have the internet entering the garage. From there we have a 60 ft Cat 5 cables run through the crawl space. Orginally we had the wireless router attached to the end of the cat 5 and then attached to the computer. We could not get a connection through this wire. We then took out the cable, and ran a new one, same issue. We took the same cable, cut it down to 25 feet, installed the router in the garage and we have an excellant connection. We then ran a new wire through the crawl space from the router. Same issue, no connectivity. Taking that cable out, cutting it down we ran the wires from the router to our computers in the garage. why a Cat5 cable would not work at 60Ft.?
View 6 Replies View RelatedCabling / Cards :: Atheros AR5007EG WLAN Not Working
May 15, 2011Up until a couple of days ago, I could connect to a wireless network no problem. Now, it's as if wireless doesn't exist on my netbook.
Computer: Acer Aspire One Model: ZG5 / AOA150
OS: XP, Service Pack 3
WLAN/Driver: Atheros AR5007EG/v7.6.0.224
I've done the Recovery Console and performed the Windows Registry repairs. I've even reformatted the computer, but to no avail at all. And I've done all the basic troubleshooting and surfed forums for way too long and found no solutions.
So this is kind of a last ditch effort. It still connects to the internet via an ethernet cord, so all is not completely lost, but it kind of defeats the purpose of having a netbook without having wireless connectivity.
Cabling / Cards :: Laptop Not Working When Desktop Is Connected
Jul 29, 2011My Internet connection works completely fine when all I have is my laptop connected to the wifi, but when my desktop also connects to the internet, than my laptop's internet doesn't work at all until i shut the desktop down.
View 2 Replies View RelatedCabling / Cards :: Wireless Card Only Working On Second Boot Up
May 5, 2012I built a computer a while ago, from a reasonably low budget. Ever since the very first boot up, the wireless card (TP-Link, unable to find model currently, will add later) only works on the second consecutive boot up. I have no idea why, I have not found anything relating to a problem like this, the computer doesn't even appear to know that there is a wireless card in it. Instead the icon shows a cable, suggesting that the computer isn't connecting with the card.
View 5 Replies View RelatedWireless Not Working - Multiple Cards - Inspiron 2600?
Feb 14, 2011I borrowed my dad's computer while mine was in the shop and it worked fine with a wireless pc card. Well, it had some issues so I reformatted it with a dell xp disc service pack 1. Since then I could not get the netgear ma521 card to pick up any networks. So, I spent a ridiculous amount of time messing with it with no success. I used that card on an identical computer and it worked fine. Still thinking it was a compatibility issue, I bought a linksys g-series card with the same issue. The "link" light never lights up. I'm pretty sure I've installed all the correct drivers. What am I missing? I've also tried reformatting using dell disc with service pack 2 and a factory xp pro disc.
View 3 Replies View RelatedCabling / Cards :: IEEE 802.11g Wireless PCI Adapter Not Working
Jun 19, 2011I just purchased a wireless PCI Adapter and I cannot seem to get it to work. The box states it is an Excel IEEE 802.11g Wireless PCI Adapter. I have inserted it into the appropriate slot and when I start up Windows the device driver states that it has not installed correctly.The device driver is: Marvell Libertas 802.11b/g Wireless LAN Client Adapter. On my device manager list it has an error tag and when opened it comes up with the following message:This device cannot start (Code 10)I have tried to update the device, but I still get this error message and I have attempted to download new drivers off the internet but am unsure about what I am doing.
View 7 Replies View RelatedCabling / Cards :: LAN Not Working Correctly In Sony Vaio Vpceb24en?
Feb 2, 2013The internet connection on my laptop does not work correctly when connected to lan ,but it works fine for the WIFI.i checked the internet connection ,it works fine in other computes.most of the time the connection through lan is not recognized. sometimes it works fine for 1 day and does not work for another day.
View 8 Replies View RelatedCabling / Cards :: Ethernet Not Working On Acer Aspire 2930z?
Oct 4, 2011I have a acer aspire 2930z laptop. My uncle bought it a couple of weeks ago and I finally got my hands on it. But I found out that its internet is not working. When I connect it to my wifi it works fine. But when I cpnnect it to a broadband the net doesn't connect. Man I wanted to use it through boradband as my broadband is faster than my wifi.
View 9 Replies View RelatedCabling / Cards :: 802.11 B/g USB Wireless Adapter Randomly Stops Working
Sep 3, 2012I've been using an 802.11 b/g USB wireless network adapter card with my computer to use in conjunction with an AT&T 2Wire router,which is about 20 or 30 feet away off in another room.After about 10 minutes on average, the adapter will stop transferring data suddenly, and it will stay that way for a while. If I do nothing, then sometimes it will start up again after several more minutes, but instead of waiting, I usually will select "Repair" from the Wireless Network Connection pop-up menu, which also works to get it started again. The problem though, naturally, is that after another little while, like about 10 minutes again, it will short out all over again. Sometimes, very rarely, it will stay working for up to maybe an hour, and sometimes, it can short out yet again within a few seconds.
View 9 Replies View RelatedCabling / Cards :: Netgear WG11v3 - Wireless Internet Isn't Working
May 10, 2012Wireless internet isn't working. The drivers aren't installed, and it never came with a cd so the only way I can install them is if i connect to the internet which i cant. I am thinking i need to download the drivers to a disk drive and then transfer them. Another possibility is, i somehow have a rogue virus on my computer ( probably julia who ruins everything )anyways it's called pc optimizer pro. I don't have an internet so i cant get any programs, but i got hijack this and TFC malware bytes and zone alarm security already on my computer.
View 1 Replies View RelatedCabling / Cards :: Toshiba P505D Realtek Network Card Not Working?
Nov 28, 2012Just upgraded to Win 7 Prof 64-bit and now my wireless card does not work. ive tried installing the drivers for it but it keeps saying its not compatible even though it is.
View 19 Replies View RelatedCabling / Cards :: Network Card In HP Dc5000MT Desktop Stopped Working?
Nov 18, 2011I Have a HP dc5000MT desktop. I run an ethernet cable from its network card {Broad NetXtreme Gigabit} to a Westell 327W router{this has worked for the last four years}. My laptop connects to the internet through this router using wireless and for test purposes through the ethernet port. I installed a new network card {Dynex DX-E102 PCI NetworkAdaptor}in the desktop. When i'm enabling either the old or new card through Control Panel, Network Connections, i get the message "acquirin network address,Firewalled".and it never enables. I ran Malwarebytes and no infections were found. I use AVG anti-virus and Internet Explorer.
View 17 Replies View RelatedCabling / Cards :: Aspire 7551 -windows 7 - Ethernet Stop Working?
May 27, 2012Perhaps once a week my ethernet port stops working. That is, it is still displayed as 'working properly' in the device management screen, but it is unable to connect to dns. System restore does not solve this problem. plugging the ethernet cable in and out (10 times) does not solve this problem. Modem reset does not solve this problem either. I decided that perhaps ethernet controller is faulty, or perhaps the ethernet port in itself- so I bought a 'usb to ethernet' adaptor and surprisingly the internet connection problem persisted (during the instances when my laptop ethernet port had problems connecting to DNS, the adaptor was also unable to connect to internet).
What does solve this problem is this: I have another notebook - I plug the ethernet cable into that computer. Obviously, internet works without any problems with my second notebook. After that, I plug the ethernet cable back into the laptop which is now unable to connect to DNS. Quite often the Not being able to connect to DNS issue still remains the first time I do this, so I have to connect ethernet cable back into my second notebook and then plug it back into the notebook with a connectivity problem. After I do this 2 or 3 times, my windows 7 laptop is finally able to connect to internet.
Cabling / Cards :: Broadcom Network Adapter 802.11g Stopped Working After Trying To Fix Unknown Device
Nov 3, 2011It may be a coincidence but my Broadcom Network Adapter 802.11g stopped working after trying to fix 'unknown device' in Device Manager (It was working perfectly before this).OS: Windows 7 Starter on 'BenQ Joybook Lite U105'.I tried the Windows Network trouble shooter and it didn't work (saying there may be a problem with the driver. I uninstalled the driver and re-installed it (including a possibly newer one) and it didn't work. Within 'Network Connections" the Broadcom wireless adapter is shown as 'disabled' I R-clicked to enable it, a window popped up saying it was enabled but it still showed as being disabled. My feeling is that something is preventing it from being enabled, logically, I would guess. Also went to 'Component Services' and ether started or restarted everything with the word network on it still no luck..My Google search on an other pc , now on day 3, couldn't find anything. (BTW the 'unknown device' which according to the icon, seems to be the joybook itself, is still not fixed and still listed as 'unknown device').
View 4 Replies View RelatedCabling / Cards :: Dell Inspiron 1520 - Ethernet Port Has Stopped Working
May 30, 2011i have a Dell inspiron 1520, the ethernet port has stopped working- no lights when cable connected. this was fine and then just stopped, it is used to connect to hub from time to time when wifi goes down. have tried 3 different cables, no joy, these all work in another laptop. No issues shown in control panel/ hardware. Have downloaded driver from Dell site, still nothing.
View 1 Replies View RelatedCabling / Cards :: Intel R Centrino N 6150 Wireless Adapter Randomly Stopped Working?
May 16, 2012i have an Asus u56e that I recently bought a couple of moths ago. It has been a great computer until today when my wireless randomly disappeared for no reason. The wireless adapter has been disabled for no reason, and when I try to re-enable it, I can't seem to find it.
View 1 Replies View RelatedCabling / Cards :: Dell Vostro 1520 Laptop Wifi Suddenly Stopped Working?
Apr 30, 2013I have a dell vostro 1520 laptop. The wireless internet just stopped working. I reset the switch on the side and nothing. Why is the wifi not working? It only works through ethernet wire.
View 1 Replies View RelatedCabling / Cards :: 1370 Network Controller Card Is Not Working In Dell Latitude D505
Jul 24, 2012I installed a 1370 network controller card into a Dell Latitude D505 and I downloaded a driver for it and it still is not working and thoughts?
View 3 Replies View Related
