Cisco :: WEP Key In Aironet 1240 / 1250
Mar 8, 2011In a multiple SSID setup, can Aironet 1240 & 1250 series AP supports different WEP key for different SSID
View 3 Replies
ADVERTISEMENT
Cisco :: 1230 / 1240 / 1250 - Web Based Registration For Guest Wireless Access
Mar 6, 2011I just started a project to make a guest wireless network available at every site in my enterprise. Guest wireless networks are currently available at some sites. Two key goals of this project is to enable WPA/WPA2 encryption and to develop a web based registration/autentication solution. All of the sites have a mixture of 1230, 1240, and 1250 autonomous access points. What do I need to do/get in order to make this happen?
View 3 Replies View RelatedCisco :: SSID To Radius Without WLC (Aironet 1240)
Mar 4, 2013I am working on setting up a new WLAN infrastructure. I have set up different SSIDs connected to different VLANs, in the AP. I also want to use Windows NPS for authenticating users on the different SSIDs, with different authentication methods based on which SSID the user/device is connecting to. To do that, NPS needs to get the SSID, but the Aironet 1240 only sends its MAC address in the Called-Station-Id. I have read a bit about this, and found out that if I have a WLC, it will add the SSID to to the Called-Station-Id. But since we do not have a WLC, I am trying to get this to work anyway. Is it possible to modify the Called-Station-Id to include the SSID on an Aironet 1240? If not, is it possible to send the SSID as a separate attribute that can be read by the NPS?
View 10 Replies View RelatedCisco Wireless :: Aironet 1240 Snmp Oid To List Dot11 Associations
Oct 18, 2012We successfully use this oid on our Aironet 1240 series AP's to list the dot11 associations to the AP:1.3.6.1.4.1.9.9.273.1.2.1.1.18 (cDot11ClientSubIfIndex).However, that oid does not work on our Aironet 1140 series AP's. Any equivalent oid?
View 0 Replies View RelatedCisco Wireless :: Aironet 1250 With 2x 2.4Ghz Antenna?
May 7, 2012I need to upgrade a 1230 to the new Aironet 1250 at a location. I have only 2 external antennas at that location.
I understand that you still can run 802.11n with 2 antennas. But I can not find anywhere in WLC 5508 v7.2 that I can disable the middle nut (C)
Cisco Wireless :: Lost Web Access On Aironet 1250
Dec 29, 2012I can no longer open a http or https connection to the AP. I do have ssh access and I can log in with full privileges.
I was using the Web interface a few days ago and it did something strange during an update. The display of the web page became corrupted and no longer responded to my input.
I restarted it from an ssh session and I have also power cycled it via the power injector. Neither method has worked.
What should I do next or what additional info can I provide from an ssh shell?
Physical access is very difficult. It requires a 30' ladder after 10 p.m. So, I would like to avoid that if possible.
Cisco Wireless :: WLC4402 / Aironet 1240 AG - Logs Are Rejected Due To Network Policy On NPS Server
May 10, 2012We are using WLC4402 for our Aironet 1240AG access points. The clients are connecting to the access points and are authenticating to the RADIUS server. I am seeing the logs in Server 2008 but they are being rejected due to Network Policy on the NPS server.
Where do I see the Authentication Type on the WLC4400 or the 1240's? In order for the clients (authenticated via Active Directory user) I have to set the Authentication in the NPS Connection Request Policy to "Allow clients to connect without negotiating an authentication method".
I do not have a certificate on the server and my method options are MS-CHAP-v2, MS-CHAP, CHAP, PAP, SPAP, and allow without negotiating. This RADIUS server was moved from Server 2003 IAS to Server 2008 NPS and there were no issues in Server 2003 IAS. I have all authentication methods allowed and it still gives me the error below. Only when I check "Allow clients to connect without negotiating an authentication method" it allows the authentication to proceed.
Client Machine:
Security ID: NULL SID Account Name: Fully Qualified Account Name: OS-Version:
Called Station Identifier: 00-17-a2-87-54-00: SSID NAME
Calling Station Identifier: 00-41-96-b6-e3-27
NAS:
NAS IPv4 Address: 192.168.90.24
NAS IPv6 Address: -
[code]...
Reason: The user attempted to use an authentication method that is not enabled on the matching network policy.
Cisco :: Aironet 1250 Overlapping Channels / COM-AP Loses Connectivity
Jan 13, 2012In my LAN, I have always been used an Aironet 1250 for internal use and always work fine. Now, I added a 3com AP but both AP are not correct. When I turned off the AIRONET 1250, the 3COM AP settings works fine. When both are turn on, the 3COM AP loses connectivity all the time.I have heard about the overlapping channels in 802.11b/g networks.
View 8 Replies View RelatedCisco Wireless :: Aironet 1250 LWAPP To Autonomous Downgrade?
Aug 25, 2010upgraded my home AP from Autonomous to Lwapp. I was an Idiot and thought i was getting an IOS upgrade. I need to revert it back to autonomous and a simple "mode" button reset doesnt work. I read that I need to Reload original IOS software, but It appears I cant get it without a support contract. I cant afford servicenet and need to obtain old ios to revert to factory default 12.4(10b)JA1. Do I need a contract to roll back? Is there an archive (backup image) of the old IOS that could be still stored on the device. I didnt back it up and need to obtain the image.
View 5 Replies View RelatedCisco Wireless :: Aironet 1250 AIR-LAP1252AG-A-K9 - Change To Autonomous Mode
Jun 11, 2013I have an Aironet 1250 AIR-LAP1252AG-A-K9 I am having issues with, and I am hoping for some direction on how to resolve them. I understand this question has been posted many times many different ways, but i have no luck unfortunately. Here is where I am: I can terminal into the AP, which has been set to factory default, with the username and password and enable password of Cisco. Once I am in the enable mode, I get lost.
Usually there would be an option to go to config. t, and work from there, but this AP does not have that option, Actually if I do a ? at the enable prompt, the commands list only starts with the letter C; but none are config.
I also cannot get into the web interface of the AP. The AP gets a DHCP IP from my DHCP server, (192.1681.128/24) but I cannot get into the web interface using the IP it gets from DHCP. The page never comes up. To add to the confusion, I cannot turn off the CLI event logging, although I enter the command "no debug all". Maybe I am off on what to put in. Nonetheless, it drives me crazy with messages every two seconds as I am trying to type while attempting to figure things out.
Overall, from reading the forums and doing Google searches, I am going on the assumption that the AP is now in lightweight mode, as opposed to autonomous mode, which is where I want it to be. I have tried the method of updating the firmware to the autonomous firmware from Jan 2013 for the AP. I use the TFTP method as I have found here on the forums a few times; I hold the mode button down while applying power to the AP, let the system LED turn red and release the button so the TFTP process can go through, but nothing changes.
I have the AP powered from a gigabit POE switch. The computer I am using for the TFTP is on the same sub net as the AP. I have tried using 10.0.0.6/24 for the computer with the TFTP on it, made sure the view all file extensions option was checked, and renamed the firmware to the .default extension-still nothing updates.
I also noticed that once I hold the mode button down for 20-30 seconds then let it go, the CLI output says the AP it is on the 10.0.0.x sub net, but I cannot ping the computer with the TFTP program on it. If i try to, it get a "Command not supported" message. So I will go on the idea that this is most likely why I cannot do a TFTP update.
About 30 seconds after I release the mode button and the AP boots, it will say it has a 10.0.0.x IP address, then it starts going crazy with messages that it cannot find a DHCP server.
Cisco Wireless :: Wireless Power Injector For Aironet 1250
Sep 3, 2012I have a cisco wireless power injector for Aironet 1250 but I called Cisco and was told this can't be found in the system.
View 9 Replies View RelatedCisco :: Using 1240 AP With 3COM Switches
Feb 23, 2012I have several autonomous 1240ag AP's that I need to enable a second ssid(Guest and VLAN2) for guest access and while I have configured the AP's according to the driections, I am not able to connect to the second ssid(Guest), but it is broadcasting. When I check the logs, I do not even see my laptop or any other device for that matter, trying to authenticate, what am I missing? I can see, connect and get an IP from the first ssid(Production and VLAN1), which is on the native VLAN and my 3COM 3C17203 switch port(14) is tagged for both VLAN's. Although I am sure that this would work better with a Catalyst switch, but it is not in my budget to replace all 4 of these, but I need this to work.
View 3 Replies View RelatedCisco Wireless :: 1240 AP Not Booting
Mar 31, 2013AP not booting and am not able to boot. Xmodem file system is available.flashfs[0]: unable to allocate available block.
The system has been interrupted, or encountered an errorduring initializion of the flash filesystem. The followingcommands will initialize the flash filesystem, and
[Code]....
Cisco :: 1240 / 4400 - Monitoring User Access
Mar 27, 2011Is there anyway to monitor client who is downloading , using the most bandwidth in Cisco wireless environment ? i have 1240 ap and 4400 controller environment.
View 1 Replies View RelatedCisco Wireless :: Using 2.4 And 5ghz Channels On 1240 Access Point?
Jan 13, 2013I am looking into upgrading a customers wireless network and they are looking at using a few 1240 access points for both internal and external connections. Their question is can one access point support both channels simultaneously? They would like to connect an antenna on the inside of the building on the 5ghz channel and another externally on the 2.4ghz channel.
View 3 Replies View RelatedCisco :: 1240 AP / 4402 WLC - VLans To Be Accessible To Wireless Devices
Sep 27, 2012We have four VLANs that need to be accessible to wireless devices. The VLANs serve the following groups: staff, student, guest, phone
We are currently using a WEP/MAC authentication for staff and phone wireless networks.
I am looking for what your recommendation would be to provide reasonable level of wireless security, particularly with the staff network, but at the same time not require a high level of management, ex. managing active and inactive MAC addresses for MAC authentication. We have the following components available - 1240 APS, Windows AD, a 4402 WLC, and 6 campuses, and outdated Cisco ACS.We need to provide connectivity to Cisco wireless phones, laptops, iPads, cell phones.
Cisco Wireless :: 4400 WLC / AP 1240 - Unable To Route Outside Of Own Subnet
Jul 14, 2008Cisco 4404 WLC
AP 1240 - LWAP
Wireless client receives a DHCP address from central DHCP server fine. Unable to route outside of own subnet . Continuous ARP WHO HAS (Default Gateway addr) TELL (client IP) messages being received. WLC running OS 4.2.99.0.
Cisco Wireless :: 1240 Link Of Sample Configuration Of AP In Design Zone
Apr 26, 2012I'm trying to find a document in Design Zone about configuring a Wireless AP and I wasn't able to find it. I have a good experience configuring switches, routers and firewalls in CLI and this is the first that I have my hands on APs (1240 AG).
View 2 Replies View RelatedCisco WAN :: 1250 / Stopped IOS Upgrade After 900+ Minutes?
Aug 10, 2011I have an Aironet 1250 Access Point. I was asked to upgrade the software on the access point so I downloaded c1250-k9w8-tar.124-23c.JA5.tar and tried to upgrade it from IE9 browser window. I allowed the upgrade to run overnight. It ran for 900+ minutes before I unplugged the router. I know it said not to interrupt the upgrade, but it seemed like something was wrong.So, I have the access point conntected to my computer with a blue cable and it is also connected to the network. I tried running Hyperterminal hoping that I could set the ip address or otherwise connect to it.
The Hyperterminal printout gives me this:
APc89c.1dfd.189a#*Aug 22 20:10:03.523: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.Not in Bound state.*Aug 22 20:10:12.027: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.*Aug 22 20:10:12.095: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 159.169.59.114, mask 255.255.255.0, hostname APc89c.1dfd.189a
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (159.169.59.39) (159.169.59.25)
Translating "CISCO-LWAPP-CONTROLLER"...domain server (159.169.59.39) (159.169.59.25)
Is it possible to get this access point working again? How would I get it working again?
Cisco Wireless :: Loading An Autonomous OS On A 1250
Nov 14, 2012When have downloaded the c1250-k9w7-tar.152-2.JA.tar and attempted to load into a 1250 via tftp the process aborts with the following message. [code]
View 2 Replies View RelatedCisco Wireless :: Status Led AP 1250 Lightweight?
Sep 16, 2012a few day l have 3 AP Ligthweight 1250, today l was checking my infrastructure and l saw that these 3 AP can´t join to the controller, l reset the AP to the, and its can not join, l checked physicly the AP, and the Ethernet Led is in Amber permanent and the Radio Led is in Green permanet , i am searching the status led to find the fix but l have not found these convination led. and l can not access to the consolo port.
View 2 Replies View RelatedCisco :: 6500 / 1250 - NCS Implementations And Configuration / VSS
Mar 22, 2013I am new to the NCS implementations and configurations. I have one very specific case with Cisco Prime Infrastructure 1.2 and autonomous APs and several issues with Cisco VSS on 6500 switches. So here is the version from Prime:
NCS/admin# show version
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.1.038
[code]......
Well the issue what we have now is that access point has been added but its not recognized by the NCS prime. I have tried all three versions of SNMP but I get the same result. The SNMP configuration is valid since I use the same for my switching infrastructure. When I enter "debug snmp packets" and "terminal monitor" I can see the SNMP communication between Prime and Aironet 1250 which is standalone.
When I switch to Life cycle theme and go to Operate > Device Monitor Center I see all devices I have added. The Aironet 1250 is reachable but under collection status I get Managed with Warnings. When I hover over with my mouse I get "None available".
I have successfully added my switching infrastructure in total, which is operating perfectly for Catalyst 2960/3650/3750/4500 series but for 6500 under VSS I have some warnings. The device is recognized by the system which is excellent and all is operational. I get the following errors under Collection Status:
feature_sensorSNMP request timed outfeature_powerSupplyFanStatus-6kSNMP request timed outIdentityCapabilityThe device is unreachable.feature_flashdeviceSNMP request timed outsam_ipsla_featureThe device is unreachable.
What can be done to resolve these issues ? I have attached a screenshot of this particular issue. The affected access point is 172.16.165.241.
Cisco :: Integrate 1250 To Active Directory
Jan 5, 2011I have installed 4 unit Cisco Aironet 1250 acting as Autonomous AP each. I want to integrate these AP to Windows Active Directory for authentication level.
When I read configuration guide on Cisco Aironet, they must be authenticated via RADIUS server.
Is it possible that these AP directly authenticated to Active Directory via LDAP protocol?
Cisco WAN :: 1250 - Stopped IOS Upgrade After 900+ Minutes
Aug 22, 2012I don't really know what I am doing and have had no Cisco training I have an Aironet 1250 Access Point. I was asked to upgrade the software on the access point so I downloaded c1250-k9w8-tar.124-23c.JA5.tar and tried to upgrade it from IE9 browser window. I allowed the upgrade to run overnight. It ran for 900+ minutes before I unplugged the router. I know it said not to interrupt the upgrade, but it seemed like something was wrong.
So, I have the access point conntected to my computer with a blue cable and it is also connected to the network. I tried running Hyperterminal hoping that I could set the ip address or otherwise connect to it.
[code]....
Cisco :: Aeronet 1250 - Radius Authentication For Wi-Fi Users?
May 20, 2013I have a aeronet 1250 access point and i have a windows 2003 radius server configured to authenticate users. I need to configure the access point for radius authentication .
View 1 Replies View RelatedCisco Wireless :: 1250 Dipole Antenna Spacing
Apr 3, 2008When using dipole antennas such as AIR-ANT 4941 with the 2.4 Ghz 1250 AP, must the antennas be spaced EXACTLY as far apart as the antenna connectors on the AP, or can the dipoles be spread further out, say to 4" spacing.
View 20 Replies View RelatedCisco Wireless :: Controller Dot11radio 0 Not Present In AP 1250?
Oct 20, 2011I've just got a new AP 1250 series, and I was trying to configure the Radio for the 2.4Ghz spectrum using the interface dot11radio 0 and I've just noticed that this controller is not present so I cannot configure it so I wonder is it could be a HW problems as it looks to me or there is another way to enable this.
I never have an issue like this before so I want to first check with you before going back to our vendor.
Here is some of the details I get from the AP itself:
System image file is "flash:/c1250-k9w7-mx.124-10b.JDA3/c1250-k9w7-mx.124-10b.JDA3"
ap02#sh controllers dot11Radio 0 ^% Invalid input detected at '^'
[Code].....
Cisco Wireless :: Dipole And Monopole Antenna With 1250 AP
Mar 20, 2012I have a customer using 1250 AP with monopole antenna, he face frequent disconnection for voice clients during roaming. Phone is forced for reregistration to call manager during the hand off. Same customer has dipole antenna in a different floor with 1250 AP and there is no issue observed for voice clients.
Is this an issue with monopole antenna ? Which is the best antenna to recommend for Cisco APs or wht is the occasion I need to use a dipole or monopole antenna ? How to understand the difference between them.
Cisco Wireless :: 1250 AP - How Many SSID Can Be Created In 4404 Controller
Jul 7, 2011How many SSID can be create in a 4404 controller and also in standalone 1250 AP? How many VLANs can be created in eac one?
View 2 Replies View RelatedCisco Wireless :: 4400 Series Controller Blocking 802.11a/n Radio Interface Of 1250 AP
Dec 19, 2009We are facing an issue with a customer where a Cisco 4400 Series controller is blocking the 802.11a/n Radio Interface of a 1250 AP. The radio shows as down on the controller GUI. The error message on the GUI is that the 'Regulatory Domain' is not supported. This can be seen from the attached screenshot. Also relevant parts of the WLC configs are attached. WLC: Cisco 4402 WirelessWLC Country: SADevice: Cisco Lightweight Access Point 1250 (LAP) is controlled through the 4402 Cisco Wireless LAN Controller (WLC)The operating system version of the LAP: c1250-k9w8-mx.124-18a.JA version of the WLC: Software Version 5.2.178.0 The problem is that the controller shows that the 802.11a/n Radio Interface in Radio Slot # 1 is always down , the customer tried to manually 'no shut' the AP interface from the console and it worked , but obviously this solution would not work as the configuration cannot be saved (LW AP).
View 12 Replies View RelatedCisco Aironet 1252 Configuration?
Mar 7, 2013Okay, I'm working on a project and the company I work for wants to add 5 Ghz antenna's to their Aironet 1252's. Okay not a problem, except I've never worked with these routers before and I can't get the configuration set (). Once I get 'em on one I can get them all done.
View 14 Replies View RelatedHow To Configure Cisco Aironet 1252
Mar 7, 2013I'm trying to configure my Cisco Aironet 1252's in my office to utilize their 5GHz antenna's but I've never worked with these routers before .
View 9 Replies View RelatedConfiguring Cisco Aironet 3500?
Jan 5, 2013We are planning to implement Aironet 3500, Do we need to have controller to install it or can we install as standlone AP.
View 1 Replies View Related