Cisco Wireless :: Configure NTP Server On ACS 5.3 Through GUI Mode
Aug 27, 2012I need to configure ntp on acs5.3 ,i dont know how to configure through gui mode,
View 1 Replies
ADVERTISEMENT
Cisco Wireless :: Configure 3502e In Autonomous Mode?
Mar 28, 2012We purchased some 3502e's and I was told we could set them up as automous ap's to do a site survey. however i haven't come across much online for instructions. i saw one post that mentioned downloading code for another ap model - i think a 1260, but we don't have rights for such a download.
View 11 Replies View RelatedCisco Wireless :: Configure A 1552 AP Over CLI To Bridge Mode
May 26, 2013a customer got an 1552 outdoor AP in local mode and installed it at a building. It has to run as a Mesh AP (MAP). Now the AP connects one time to the WLC 5508 and started a download. After that, the AP never came back. Like we saw on the other installed 1552 RAP's, they all where in local mode.We configured all AP's to bridge mode, but the MAP could not join anymore.Is there a CLI command to change the mode on the AP itself?From the WLC it's not a problem, but for the AP CLI I cannot find sth.
View 1 Replies View RelatedCisco Wireless :: Configure Two AP WAP4410N In Bridge Mode?
Jun 16, 2011I want to configure two AP WAP4410N in Bridge Mode and I don´t find the correct configuraction tips.
View 11 Replies View RelatedCisco Wireless :: Configure Administrator Password Through Gui Mode On Acs 5.3?
Aug 27, 2012i forget the console admin password for acs 5.3 which is installed on vmware ,but am able to login through gui mode,so is it possible to change username and pwd for console administrator through gui.
View 1 Replies View RelatedCisco Wireless :: Aironet 1130 AG - Unable To Enter Configure Mode
Sep 14, 2011I just received a Cisco Aironet 1130 AG wi-fi router to configure and when I entered the router through console, I am not able to get into config mode. It says:
[code]....
Cisco Wireless :: 3600 And WSSI - Configure AP Sniffer Mode / SE Capability?
Mar 25, 2013I'm trying to find a configure example detailing how AP sniffer mode and SE capability can be configured on a Cisco 3600 that is equpped with a WSSI. I came across the WSSI deployment guide which does not go into the detailed that I would like to know.I'm particularly after the flow details.WLC config guide 7.4 only discusses the legacy AP sniffer and SE configuration.
View 1 Replies View RelatedLinksys Wireless Router :: How To Configure E2500 In Wired Bridge Mode
Jan 25, 2012My client has a DSL modem and a Belkin wired 4-port router configured to connect to it using PPPoE. Apparently there is no way to configure the E2500 such that it may be dropped in as a direct replacement for the Belkin (which would also provide wireless access) without the PPPoE login/password (from the DSL provider, Verizon).
I would like to connect the "Internet" port of the E2500 to one of the Belkin's 4 ports, in order to use the E2500 for wireless internet access without using any of the 4 wired ports but I think this creates a NAT within an existing NAT network?
To avoid that if I configure the E2500 in wired bridge mode, it becomes transparent, and I can no longer access its administration interface using the address 192.168.1.1 (since that address belongs to the Belkin). How may I, for example, change the wireless password which the E2500 is in wired bridge mode?
Linksys Wireless Router :: E3200 Ftp Server Passive Mode?
Mar 15, 2012My e3200 is running great Unfortunately it seems that the ftp server does not use/support passive mode transfers, which means that clients behind a "corporate style fw" cannot access the server. The solution would be running the ftp server using passive mode (and opening the necessary ports on the server side), but it seems that it is not supported. Or at least I don't know the passive mode port range.
View 6 Replies View RelatedCisco Firewall :: Configure The ASA5510 In HA Mode?
Jun 4, 2012configure the firewall Cisco ASA5510 in HA Mode.Enclosed Network diagram.
View 14 Replies View RelatedLinksys Wireless Router :: Set E4200 To Support Anonymous Access To Ftp Server In Read / Write Mode?
Jul 17, 2011Is there any possibility to set linksys E4200 for support anonymous acces to ftp server in read and write mode ?
View 1 Replies View RelatedCisco Firewall :: Possible To Configure Bridge Mode In ASA5505
Aug 1, 2011Is it possible to configure bridge mode in asa 5505 if it is can u provide me a config.
View 1 Replies View RelatedCisco Wireless :: WLC 5508 - Configure IPSec Between WLC And Server 2008 NPS?
Dec 13, 2011I have been unable to get IPSec working between my WLC 5508 and a server 2008 NPS radius server. Any luck configuring this? I have opened tickets with both Microsoft and Cisco, but so far have not been able to configure it properly.
View 2 Replies View RelatedCisco Firewall :: Configure ASA 5520 In Transparent Bridge Mode
Sep 20, 2012I am new to cisco ASA. I need to configure ASA 5520 in transparent bridge mode. [code] I need to place the new asa firewall in transparent mode. How to configure the firewall in transparent bridgmode.
View 5 Replies View RelatedCisco WAN :: ASA 5505 - Configure C877 In Half-bridge Mode?
Feb 16, 2011I want to achieve the following setup:
So basically I have a C877 and a Cisco ASA 5505 and I want to push the public IP of the ISP to the outside interface of the ASA so the Cisco 877 will only be responsible for ADSL and PPPoA. Don't ask me why I don' t use a modem/router instead. I know that is a waste to use the C877 in this way but I want to test the setup.
Right now the config of the C877 regarding ADSL and PPPoA looks like that ( I don't have the ASA connected yet, so all the PC are connected directly to the C877 right now):
interface ATM0 no ip address load-interval 30 no atm ilmi-keepalive pvc 0/35 encapsulation aal5mux ppp dialer dialer pool-member 1
interface Dialer1 ip address x.x.x.x 255.255.255.248 ip access-group OUTSIDEACL in ip nat outside ip inspect FWRule out ip virtual-reassembly encapsulation ppp dialer pool 1 ppp authentication chap pap callin ppp chap hostname xxxxxxx ppp chap password 0 xxxxxxx ppp pap sent-username xxxxxx password 0 xxxxxxx
ip route 0.0.0.0 0.0.0.0 dialer 1
ip nat inside source route-map Nat interface Dialer1 overload
interface vlan 100 is my LAN configured with DHCP.
how I should configure the C877 to push the public IP to the ASA?
Cisco Routers :: RV082 - Configure WAN2 In DMZ Mode On Each Router
Jan 15, 2013We have 2 offices in different countries both using the RV082 router. Currently both offices have an internet connection on WAN1 and that is working fine. We are adding a Point to Point circuit between the two offices, and my question is on the RV082 configuration on each side.
I was going to configure WAN2 in DMZ mode on each router, then connect the point to point circuit to the WAN2 port. On the China side, the DMZ IP will have to be a private address (192.168.177.1), while the DMZ port on the San Diego side will be a public IP. We need internal computers to be able to go to the internet normally through WAN1, but also go through WAN2 if they are trying to reach the other network. I will be adding routes on each RV082 for this.
Is there anything wrong with this configuration? Do I need to change the routers from Gateway to Router mode? Does it matter if the DMZ WAN2 port has a private IP address?
D-Link DIR-601 :: Configure In Bridge Mode As An Access Point?
Aug 23, 2011My apartment already has internet provided to all of the rooms, but I'm trying to set up my router as a wireless access point. I tried disabling DHCP on the router, but then I wasn't able to get any internet access at all. Does this device not support bridge mode?
View 5 Replies View RelatedCisco Routers :: RV120W / Configure Bridge Mode For Internet Access?
Jan 1, 2013We have a RV120W Wireless-N VPN Firewall and we want to configure the router in brigde mode (transparent). Because we have another Firewall, use for filtering and default gateway on the LAN. The ISP provide IP address by DHCP, so we must connect the internet connexion to the WAN interface. But How can we do for connected the RV120W to our firewall? The router mode on the RV120w allows-it to make this configuration?
View 1 Replies View RelatedLinksys Cable / DSL :: How To Configure WAG200G To Work In Bridge Mode
Apr 21, 2007I'm trying to configure my WAG200G to work in bridge mode so that it can transfer my external IP address to my ISA server.My network map is very simple,Internet -- WAG200G -- ISA Server -- LANCan
View 7 Replies View RelatedCisco Switching/Routing :: Configure PPPoE On 831 Router With Modem In Bridge Mode
Sep 7, 2012config to setup PPPoE on the cisco 831 router to be used with a modem in bridge mode. I have tired other peoples configs found on the web but, not all the commands were available on the IOS version thats on the router. Also note that I bought this as a used router and I dont have a service contract so I am unable to download an updated IOS. The router ver is 12.3(7)T9 and the IOS is c831-k9o3sy6-mz.123-7.T9.bin. Running config below is last tried still could not connect or get ip address from isp. [code]
View 2 Replies View RelatedConfigure Windows Server As Both ISA Server And AD DC?
Jan 25, 2013I know the best thing one should do is install an ISA server and an Active Directory Domain Controller on separate servers. But for some reason, I want to configure my Windows Server 2003 as an ISA server as well as an Active Directory Domain Controller. What can happen to my server making it run improperly. For example, my ISA server will function mainly as a Firewall, I wonder if all the rules I create in ISA server determine what I mean it should work or I have to consider any affection from Active Directory DC to those rules?I have to ask this question because I've already installed both ISA and AD DC on my Windows Server 2003, already created an Allow. All rule (just for testing connection) in ISA server but I can't ping from all the clients to my server, all the clients can ping each other and the server itself can ping to all clients. I just think that may be the affection from AD DC to my AllowAll rule in ISA server.
I successfully created some rules that worked greatly as they should work but when I hadn't installed AD DC yet (just installed ISA), however right after installing AD DC, it still worked well (this made me think that AD DC didn't affect to how ISA works). Then I configured a little related to DNS server, and maybe something I don't remember exactly and now I can't ping from my client PC to my server. My network is virtualized using VMware 8 workstation and GNS3, at first there is no need of GNS3 because I just want to test my internal network (some clients connected to the internal interface of ISA server). Depending on VMware that I can't be sure if it is some fault of VMware or any other thing but my configuration on the servers.
Cisco WAN :: 2821 - Configure Router To Use 2 ADSL Lines With Dialer And Modem In RFC2684 Mode?
Mar 9, 2011I want to configure my router to use 2 ADSL lines each with a dialer and a modem in RFC2684 mode. I have a 2821 (IOS 12.4) with an HWIC-4ESW.
My network topology is like this :
ADSL Modem 1 (RFC2684) --
(Fa0/0/0)
Router -- (Gi0/1) MyLAN
(Fa0/0/1)
ADSL Modem 2 (RFC2684) --/
1. I configure my DSL Modem in RFC 2684. The first use 172.16.0.2/29 and the second 172.16.0.3/29. I connect this devices to Fa0/0/0 and Fa0/0/1.
2. I configure Vlan1 to use the network configured on my modem :
interface Vlan1
ip address 172.16.0.1 255.255.255.248
3. I try to ping my devices :
#ping 172.16.0.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.0.3, timeout is 2 seconds:
!!!!!
[code]....
Linksys Wireless Router :: E2500 Need To Configure Two VLANs In Home Network To Separate Server 1 With VM
Jan 14, 2013I need to configure two VLANs in my home network to separate a server 1 with VM from another part of network with server 2 and wifi clients. Is it possible to keep DHCP server and internet access on E2500 enabled for both vlans? If so, how should I configure ports tagging (variant shown on screen shoot below doesn't work).
View 5 Replies View RelatedConfigure Tplink Modem On Repeater Mode In Order To Repeat Signal From (Huawei)?
Dec 4, 2011That's y topology:
(TPLINK) /////////////// (Huawei)--->(internet)
...................wirless................cable
I want to configure my tplink modem on a repeater mode in order to repeat the signal from (Huawei) ...
Cisco :: Possible To Install LMS 4.2 In Multi Server Mode
Mar 15, 2012Is it possible to install LMS 4.2 in multiserver mode but with possibility to select installed components/applications? I'm talking about Solaris version. I can't see such an option. It will install all the components on every server which I don't want to. We have LMS 3.2 working in such setup: one server with most major components, other running just DFM and third one with only HUM installed.
View 3 Replies View RelatedTP-Link Dual-Band Wireless :: TL-WDR4300 Configure Ftp Server For Remote Access Of Shared Storage HDD
Jan 26, 2013Region : Singapore
Model : TL-WDR4300
Hardware Version : V1
I need to set up remote access to my HDD connected to my WDR4300, so I can always go online when I am out to retrieve the saved files in the HDD. However I have zero knowledge of network setting of the FTP servers, I can gain access when I am home and connected to the Wireless network, but how to gain access remotely.
Cannot Communicate With Primary DNS Server After Sleep Mode?
Apr 13, 2012So whenever I put my desktop to sleep and then turn it back on, I cannot connect to the internet. My laptops are fine and can connect to the internet w/ the wireless however.When I have windows diagnostic run a troubleshoot and repair, it tells me it can't communicate w/ the primary DNS server and that resetting the Local Area Connection will fix it (And it does).If I restart the computer, it seems to fix this problem as well.I don't get why it can't communicate w/ the DNS and that I have to manually reset the LAC everytime I turn on the computer from sleep mode.
View 3 Replies View RelatedSQL 2k3 Server Goes Into Single User Mode Randomly?
Jan 12, 2011Actually not randomly. It's normally after weekly reboots. This causes the Great Plains DB to be locked to 1 person, so other people get errors.
Sometimes I can just unrestrict access, other times it's grayed out and I have to drop the DB and restart the services to take it out of single user mode.
SQL 2k3.
Cisco Wireless :: AP 1041 Conversion From Autonomous Mode To Lightweight Mode
Mar 4, 2012We have recently converted 1 Cisco Lightweight AP 1041 to Autonomous mode for site-survey purposes. We now want to convert it back to lightweight mode.
View 1 Replies View RelatedCan't Enable 1Gbps LAN On Server - Refuses And Goes Into 100 Mbps Mode
Apr 6, 2011So I have a Windows 2008 R2 SP1 Enterprise Server and a gigabit LAN network card onboard. But it refuses to run at gigabit speed and if forced to it, it just says that network cable is unplugged and doesn't work.
I tried switching to a newer and better motherboard (still with gigabit LAN)I have updated drivers.I have checked cables (which are all cat 6 cables and work just fine with other computers in gigabit LAN mode)I've checked and switched ports on the switch and the switch itself...no change. They work just fine with other non-W2008 machines, they get gigabit LAN
I am completely stomped as to what I can do to fix this. It runs just fine in 100 Mbit mode, but can't in any way get it in gigabit mode.I am completely stomped as to why it refuses...is this a limitation of Windows 2008 or something or is there a fix to this?
Cisco :: 2951 - Access Server Not Displaying ROMmon Mode Target Device
Sep 17, 2012I'm configuring a console server for configuring remote devices. This is working well except for the fact that if a target device is in ROMMON mode, the console server refuses to displays the target device console. It does open the connection but the ROMMON prompt is not shown on the console server . This is essential for this device as we will need to use it to reset passwords remotely and thus need to be able to access ROMMON mode from the console server.
Parts used are a 2951 router and a HWIC-8A serial card. Posted my config below:
[code]
Current configuration : 4389 bytes
!
[Code].....
Cisco AAA/Identity/Nac :: 5510 / Failed To Privilege Mode When Authenticated By Radius Server
Aug 26, 2007I tried to authenticate and authorized Nokia/checkpoint Nortel/AD3 and Nortel 5510 platform using an 4.1 for windows ACS. the ACCESS-REQUEST is well processed bi the radius server wich send ACCESS-ACCEPT to the AAA Client (ie NORTEL or NOKIA), but i'have got privilege access denied on the Client side. RADIUS IETF Dictionnary is used for every device. all others Cisco Devices authenticate and are well authorized.
View 3 Replies View RelatedD-Link DIR-655 :: Wireless Connection Set To Mix Mode / Desktop Can't Connect To N Mode
Feb 28, 2012i got a Dir-655 router and Dell 1501 wireless -N mini PCI card (802.11 bgn compliant). Router was set to mix mode but my desktop Dell XP8300 can connect only till G mode.
1) I search on web and some said that i need to set my router to N mode only for my desktop to connect to N mode. IS THIS SOLUTION CORRECT??
2) Another issue was my sis got other old brand latop which can only connect to B mode, if i set to N mode only, she won't be able to connect it right?