Cisco Wireless :: Exalt Extend Air E5005 Bridge

Jun 3, 2013

We are looking for a solution to bridge two locations. 1300 and 1400 are now eol and we have found that Cisco now offers Exalt ExtendAir r5005 product for this purpose.

However we were unable to find a P/N for SmartNET for this device. Is there any such P/N?

View 3 Replies


ADVERTISEMENT

Cisco Wireless :: WLC 2106 / Setup Mesh And Use Ethernet Bridge Port On MAP To Extend Network?

Mar 3, 2013

I've a WLC 2106 and it is running IOS version 7.0.240. I am trying to setup a wireless mesh and used the Ethernet bridge port on the MAP to extend the network. The wireless mesh works fine but I can not get the switch to work that is connected to the ethernet port on the MAP.I'm using two different Access points. I'm using a Air Cap 3502i as the RAP and a Air Lap1142N as the MAP.The switch port that is connected to the RAP and MAP is configured as the following:

switchport mode trunk
switchport trunk native vlan 2
switchport trunk allowed vlan 10,20,30,40

[code]....
 
The wireless mesh between the RAP and MAP works fine. I can connect a device to the MAP wirelessly and access the network with no problem but I can not get anything to work that connects to the switch that is connected to the MAP ethernet port.

View 2 Replies View Related

Using POE To Extend Wireless Network

Jan 13, 2012

My b/g/n router is at one end of the house and on the second floor needs to be. I currently have a b/g/n wireless bridge hooked to a LAN port of an b/g/n router that I am using as an access point almost in the center of the house, about thirty feet away with one wall between them. I get good connection speed on an Internet TV that's about 7 feet below the access point with one floor/ceiling between. I get a reliable but slow connection to an Internet TV that is about 20 feet from the access point with two walls between. I get intermittent, slow connections with portable devices near the opposite end of the house on the first floor. Measured horizontally, they are within 15 feet of the upstairs TV that has a slow connection and about 9 feet below it.

The ceiling of my unfinished basement stairwell is a few feet below my router. I am thinking of putting a wireless bridge in the stairwell and connecting it with ethernet cable to an access point located in the crawl space, which is very dry, under the house directly below the upstairs Internet TV. It would be about 12 feet below the TV with a floor and a ceiling/floor between. That location would put it within 15 feet of the wireless devices on the far end of the house that now have a poor connection, with only a floor between. My primary goal is to get a better connection for them, but I'm hoping for a better one to the upstairs TV. My house is of frame construction with mostly plaster interior walls.

I want to use a POE access point under the house because I think it would be easier and safer than running a long extension cord. Looking at POE devices in catalogs, it is often not clear to me whether the device in question expects to be powered over ethernet or expects to power other devices over ethernet.

I have the following questions:

Does my plan sound feasible, and would it be expected to accomplish what I want?

How can I be sure that, when I order a POE access point, it expects to receive power over ethernet, not provide it?

Can POE devices be cascaded? If I do this and find that I did not get the coverage I hoped and, therefore, want to add another POE AP, can I add a POE hub or switch and run cable from it to the additional POE AP? If so, is there any particular monclature for devices that expect to both receive and provide POE? Can such devices receive and provide over any port, or do they have to receive power on a designated one and provide it to the others?

View 3 Replies View Related

Cisco Wireless :: How To Configure 3 X 4410N To Extend Wi-Fi

Oct 18, 2012

I would like to configure 3 Access Point (WAP4410N) to extend the wifi in my house. I try it to do several configuration but it doesn't work.
 
In this configuration, the wifi devices disappears and re-appears constantly. I lose the IP addresses and they all come down only every 5 seconds. I made screen shots of the 3 terminals in the word document attached below

View 2 Replies View Related

Cisco LAN :: 2800 Wireless Network Extend

Feb 15, 2012

i have following requirement.Wired part of the network is already done.
 
CiSCO 2800 or 800 router connected to ethernet switch and pcs connected.i want another 5 pcs connect to this LAN through wireless connection distance between wired part and this new location is approximateley 200meters. how can i do this using access points and repeters or any other methods?

View 7 Replies View Related

Use Laptop To Extend Wireless Range?

Oct 27, 2011

I have a couple of computers that are out of range of my router so I came up with a unique solution. I have an old laptop with 2 wireless cards that I put halfway between. It is working but I have a few oddities. First of all, the out of range computer is connected to another wireless router that several laptops and another (wired) PC connect to. It has ICS (Windows XP internet connect sharing) enabled. This rules out using ICS on the laptop as 2 pc's would have the address of 192.168.0.1.

View 1 Replies View Related

Extend The Range Of A Wireless Network?

Jan 20, 2012

I'm trying to extend the range of my wireless network from my house to my workshop, which is about 600 feet away. There are no trees or other objects in between the two buildings. how I could boost my wireless signal to reach that far?

View 1 Replies View Related

D-Link DIR-655 :: Can Use One To Extend Wireless Range

Jun 4, 2010

I get 10% signal in my bedroom using WEP2 and I would like to boost this to at least 50%

1) I have 2 DIR-655 Wireless N routers, both functional.
2) The first router is on the other side of the house from my room
3) The second router is not in use at all ... I'd like to take advantage of it
4) I have an Ethernet drop in my bedroom that runs under the house to the first router. I have a switch on that drop and use it for my Sony / Netflix box ...

I have been told that the DIR-655 cannot be used as a repeater. Can I not take advantage of the 2nd router to boost my signal in any way?

View 9 Replies View Related

TL-WR740N How To Extend Wireless Signal

Jan 21, 2013

Ground floor: My ISP's wireless router and an 8-port switch. For wireless communication I use the ISP's Wifi and the 8-port switch is used for wired rj45 sockets around the house.

1st Floor: I have a TP-LINK TL-WR740N Wireless Lite N Router 150 MBps which I connected to a socket and have a PC connect with wire on it and also used for Wifi. The Wifi network I setup on the 1st floor is different than the one on the ground floor (2 routers).

At the first floor I have the problem that in other bedrooms far from the router the Wifi signal (either gets lost) or it's very low. So I bought a TP-LINK TL-WA701ND Wireless N Access Point 150MBps which I configured as universal repeater.

The access point supports only WEP encryption when used as repeater/universal repeater so I changed the wifi of the router to WEP with ASCII with 128bit character length and established the connection.The most important now is that even though the Wifi signal in the bedroom with the AP is full, when I switch off the wifi of the iPad and back on, it is not connecting to the internet. Yesterday I noticed that it was giving me the ethernet card IP (169.…). I went close to the router with the iPhone, got connected and when came back to the room with the AP it was working but the iPad is not working.

View 2 Replies View Related

Cisco :: Extend Existing Wireless Network Using Ethernet

Jun 9, 2012

I have an 802.11n/g wireless network throughout my house. I also have several ethernet ports. I want to use the ethernet port to connect to the network and extended the existing wireless network (same SSID). I know AirPort devices from Apple can do this but I wanted to know if anything else could as well. It is too slow when I try to wirelessly extend it (not using ethernet at all).

View 4 Replies View Related

Cisco Wireless :: 881W Office Extend Ap Login?

Jan 17, 2011

Just recently got a new 881W router. i have downloaded the 2.4 software upgrade. I go into the Office extend AP login and i get just a enter button. when i click on the enter button the AP page does not come up.

View 7 Replies View Related

Cisco Wireless :: 5508 / Office Extend AP Setup?

Jul 6, 2010

I have finally got my office extend AP to connect to my companies 5508 controller by enabling NAT on the management interface and can see all the cooperate SSID's. However when I try to connect to the SSID my client either gets a local IP address from my home router or then cannot get any IP address.

View 9 Replies View Related

Cisco Wireless :: Using WAP321 To Extend RV220W Wi-Fi Network?

Feb 27, 2013

I'm trying to configure a WAP321 so that I have the same SSID and WPA2 password on both the RV220W and the WAP321 so that i can reach all areas of my clients location. 

View 1 Replies View Related

Cisco Wireless :: How To Use Two To Extend Coverage With Aironet 1130AGs

Jan 21, 2013

I have two 1130 AGs and would like to have one connected to a wired net with wireless clients on the G radio, and connected to the other using the A radio, and it having clients on it G radio.

View 1 Replies View Related

Cisco Wireless :: Wirelessly Extend Range Of WRVS4400N?

Oct 31, 2009

I have a WRVS4400N v2 acting as a gateway connected to a cable modem and am interested in extending it's range by placing a WAP4410N elsewhere in the building to cover a deadspot.  Is there a mode on the WAP to best achieve this (e.g., wireless repeater, bridge, etc.)?  I had assumed that it would be the wireless client/repeater mode, but the thread below leads me to believe otherwise, but is not labeled as resolved.
 
[URL]
 
As a different approach, could I extend the range of the original gateway WRVS4400N by dropping a second WRVS4400N in the deadspot and setting it to router mode?  Language in the WRVS4400N v2 administrator screens lead me to believe that I could try this but I am unclear as to whether it would work wirelessly or need to be connected to the gateway via an ethernet cable, which is what I am trying to avoid.

View 7 Replies View Related

Extend Wireless Signal / Range Of Internet?

Dec 7, 2012

how do i extend wireless range and increase signal to granny flat for internet? from the modem to the granny flat about 15m+, i tested it with my laptop get 3 green signal and on inSSID get around 74+ RSSI but with Asus-n13 and mini Tp Link wireless USB adapter get above 79-80 RSSI. don't know why but i get signal for surfing internet on laptop but randomly get drop out. household gave me $200 to improve the signal....

View 4 Replies View Related

D-Link DIR-825 :: What Device To Be Used To Extend Wireless Network

Aug 10, 2010

set up the wireless network at a friend's house, which is a large solid-brick house that winds from one end to the other.  The current location of where the cable comes into the house is unfortunately on the far-left end of the house, which means that the right end of the house receives no signal from their DIR-825 wireless N router.

What I've been looking into is the best way to wirelessly extend the wireless signal to the other end of the house.  It seems straightforward enough to use an ethernet cable and access point to extend a wireless network, but that is not really a good option for this house.  After reading many forum posts (and not being an expert myself) it seems like it may be possible to wirelessly extend the wireless network with another router, although it appeared that this is much less common (if at all possible) with wireless N routers.

what device I need to accomplish what I've described above?  Another router, or some kind of access point/bridge?  I saw at least one rather expensive wireless N repeater online (a Hawking brand, I believe) but was hoping to avoid that option initially, but if that is the only way to go then so be it :-) 

View 12 Replies View Related

WNDR3700 / Extend Wireless To Garage For IP Camera?

Jul 21, 2012

Here is my current setup:

Cable Modem>WNDR3700>CAT5E>WNDR3700

The last WNDR3700 is in my media closet at the other end of the house essentially serving as an AP. I get weak signal in the garage on a standard WiFi card. Thing is I am installing an IP camera soon, so I need ethernet connect ability. Hoping to not have to buy another WNDR3700 as they are pricey. The bottom line goal is to have a router or AP out in the garage to connect my IP camera. What would be the best way to accomplish this? Running a cable is out of the question price wise right now. I have no problem buying a directional antenna and pointing it towards the house, but this would require the router to have external antenna.

View 19 Replies View Related

Cisco Wireless :: Extend Signal For RV220W As Access Point?

Mar 25, 2012

I plan to extend the wireless signal for RV220W as a wireless access points now. Can we use lower end model instead of another RV220W?

View 2 Replies View Related

Cisco Wireless :: AP 1242ag / AIR-ANT1728 - Extend Cable Length

Dec 2, 2012

I 'm administration an Aironet 1242ag, and we are currently buying an AIR-ANT1728 as antenna. The standard cable for the antenna is 0.9m long, and It could be insufficient for my needs.
 
So a few questions:
 
Can i extend it ?
AIR-CAB050LL-R could fit?
 
The connectors should be 1 male, 1 female?

View 1 Replies View Related

Cisco Wireless :: 5508 Office Extend Internal External?

Dec 18, 2011

I am having an issue with internal and external clients. When we have the nat ip configured on the controller we cannot connect internal ap's at all. When we take the nat ip out it works fine. We are on code 7.0.220. I have tried the following command  <config network ap-discovery nat-ip-only disable> and it did nothing.

View 1 Replies View Related

Cisco Wireless :: Does 3600 Support Office Extend Feature

Feb 13, 2012

Does cisco 3600 support office extend feature? If yes, is there a controller requirement? I know cisco AP 600 supports office extend

View 24 Replies View Related

Cisco Wireless :: AP 1131 As Office Extend With Local Ssid?

Feb 15, 2012

I have an 1131ag AP attached to our 5508 as an OEAP over the Internet.  Everything with the corporate SSIDs is working correctly, so no issue there.  I was wondering if a local ssid can be configured on the AP, similar to what can be done with the OEAP600, in order to provide wireless access to the Internet only?  On the WLC, on the H_REAP tab, there is a button labeled "Reset Personal SSID"

View 3 Replies View Related

Cisco Wireless :: Associate Non-root Bridge Model 1310 To Root Bridge Model 1400?

Apr 24, 2012

Can I associate the non-root bridge model 1310 to the root bridge model 1400? Is there any problems on the configuration I need to be aware of?

View 7 Replies View Related

Home Network :: How To Extend My Wired Internet Using Wireless

Mar 13, 2011

what i am after is, a way to extend my internet in a room that cant connect wireless. i want to be able to connect my ipod touch/ nokia phone / ipad on my home network. i have wireless in the house, But, because of the insulation in the walls and ceiling in this room(kingspan, with the silver foil on it) i cannot get a signal, i am wanting to know if it is possible to some how use the wired connection from my pc in the room and add a wireless dongle(usb) and some how get it to share the connection?

View 5 Replies View Related

Extend Wired Network With Wireless Router (TP-Link)?

Apr 4, 2012

I have a wireless router (TP-Link) which I want to use to extend my wired dorm room cable connection.The "blue" network cable currently goes straight into my laptop and I have no control over its configuration.Is it possible to plug the blue cable into the WAN port of my router and then wire the computer back into a LAN port?BUT that's not really the major problem. Mainly I would like to know how the router must be configured to allow me to use other wireless devices in my room (phone printer etc).Someone told me that I "just" need to use the "bridge" setting but that turned out to be complicated by warnings and messages about other SSIDs.Is "bridge" really the right mode? It seems it's for connecting two wireless networks together.

View 4 Replies View Related

Possible To Extend Wireless Signal Without Making New Access Points

Jan 18, 2012

At the moment i have 3 routers across the house, each acting as a wifi access point.My problem comes to when i use my phone or laptop, it connect to a random access point doesn't matter of the signal.Is it possible to combine 3 routers as one access point. So that i would connect to one access instead of 1of 3 access points, that would be a strong wifi signal no matter when i am in the house. Something similar to what bit malls or stores have.I have looked at wi-fi repeaters, but they just repeat the wifi and make new access point.

View 2 Replies View Related

Linksys Wireless Router :: Is It Possible To Extend Range Of WRT54GX V

Aug 6, 2012

I am trying to use the Netgear WNR 2000 V3's repeater function to wirelessly extend the range of a Linksys WRT54GX V.2. I have the SSID's and channels the same. I had the Netgear working great as an extender with my Apple Airport Extreme base station (equipped with WDS). As far as I know, the Linksys is not equipped with WDS.

View 4 Replies View Related

D-Link DIR-655 :: Connect Two Routers To Extend Wireless Range?

May 15, 2011

I have two Dir-655's - router1 and router2.

Router1:
ip 192.168.0.1
subnet 255.255.255.0
DHCP enabled range = 192.168.0.100 to 192.168.0.200
Router 2:
ip 192.168.0.2
subnet 255.255.255.0
DHCP disabled

Routers are connected to each other via LAN ports with a switch in between.Both routers have the same wireless SSID with the same password. I am able to connect wirelessly to both routers no problem.

I have a machine running a shared iTunes library which has a wired connection to router1. I also have an Apple TV wired to router2. My issue is if I am connected wirelessly to router2 I may or may not be able to connect to iTunes library. Conversely, if I am connected wirelessly to router1 I may or may not be able to play content from iTunes to Apple TV. I cannot figure out why everything works fine sometimes yet at other times I cannot connect devices between the two routers.

View 3 Replies View Related

Linksys WRT54g - Extend Resident Wi-Fi With Own Wireless Router?

Nov 6, 2011

My friend just moved into a new apartment complex and they provide wifi for their residents but the coverage sucks in his apartment. He can only get a decent signal in the one corner of his place. Is there a way to use an old linksys WRT54g router to "extend" the network and provide better coverage in his apartment?

View 1 Replies View Related

Cisco Wireless :: Office Extend 1142 And Dtls Keepalive Failure

Jan 18, 2013

I am setting up office extend with 1142 APs on a 5508 controller.  All seems ok and I see my SSIDs on the remote AP.   However when I try to connect I don't get a dhcp address and the connection fails.  When I look at logs and some debugs I see dtls keepalive failures and the AP is actually disconnecting and re-associating with the controller.

View 24 Replies View Related

Cisco Wireless :: 5508 Office Extend Working In Mixed Environment

Feb 4, 2010

If we have a mixed environment of 4400 and 5500 controllers will the office extend features still work or will we have to run a seperate wireless domain from the 5508 for the aps that we need office extend on?

View 2 Replies View Related

Cisco Wireless :: 5508 - Multiple Office Extend APs Behind NAT To Single Address

Feb 29, 2012

I have a situation where a user needs more than one office extend AP in his home. My office extend controller is a 5508 running 7.0.220.0. Are there any issues NATing multiple OE APs to a single address? My initial lab results indicate that each of the AP's associate with the controller and establish a DTLS tunnel. I see the SSIDs get pushed to the AP and then it seems to restart the process never being fully operational. Is there a workaround that will allow me to run mutliple OE APs?

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved