I need to configure WAP4410N wireless access point for our company guest and visitors.i need them to only surf internet and not to go to LAN (servers).I think i need to create VLAN for this ? can any one tell me setting for configure only to surf internet thru WAP4410N ?
View 1 RepliesCurrently I have a WAP4410N setup and would like to add a second WAP4410N but as wireless repeater. I want my users to have wireless access without the need to keep changing the wireless connection based on their location within the factory.
The AP Mode on teh WAP4410N gives me the options below, but I am not sure which one is the correct one:
Option 1 - Wireless WDS Repeater
Option 2 - Wireless Client/Repeater
Below is the link from cisco with explanation. [URL]
Also, if have WAP54G, can I setup this unit to be a wireless repeater with the WAP4410N devices? or all repeaters must be of the same model? Existing WAP4410 is setup to operate at Wireless B/G Mixed mode.
I need setting up a WAP4410n v 2.0.1.0 as a repeater. Warning, this is the first time I have worked with a repeater. I have tested with a netgear router and a Linksys 160n router. Unfortunately I only have the netgear to continue testing with since the Linksys is at my customer’s site. I can get my hands on a Linksys E3200 if I have to. I have tried a number of setting combinations and I still cannot get the signal to be repeated. So this is what I think the setup should be:I setup the router and the WAP4410n repeater to have the same ssid and channel. For security I first tried to have both the router and the repeater to use WPA2 personal using TKIP then I read that there is a problem using WPA2 with version 2 of the firmware so I then tried using WEP having both the router and repeater using the same key. I selected Wireless WDS repeater mode. I did a site survey and selected my router. Now from what I understand, which is very little, this is all I should really need to do. I have left all of the other settings to the default values. So what am I missing?
View 1 Replies View RelatedSetting up a WAP4410n v 2.0.1.0 as a repeater. Warning, this is the first time I have worked with a repeater. I have tested with a netgear router and a Linksys 160n router. Unfortunately I only have the netgear to continue testing with since the Linksys is at my customer's site. I can get my hands on a Linksys E3200 if I have to. I have tried a number of setting combinations and I still cannot get the signal to be repeated. So this is what I think the setup should be: I setup the router and the WAP4410n repeater to have the same ssid and channel. For security I first tried to have both the router and the repeater to use WPA2 personal using TKIP then I read that there is a problem using WPA2 with version 2 of the firmware so I then tried using WEP having both the router and repeater using the same key. I selected Wireless WDS repeater mode. I did a site survey and selected my router. Now from what I understand, which is very little, this is all I should really need to do. I have left all of the other settings to the default values.
View 2 Replies View RelatedIs there a recommended configuration for setting up a wap4410n as an ap?
The reason I ask is that I have an rvs4000 with a wap4410n as ap and a second wap4410n as wds repeater and it seem I have to reboot one or more of them every couple of days due to various users being unable to connect wirelessly or being able to connect wirelessly, but with no Internet access.
Starting with a reboot to facory default, the rvs4000 gave the wap4410n ap an address of 192.168.1.101 so I just left things like that. Similarly, the wap4410n wds repeater was given an address of 192.168.1.103, which I did not change.
Given there seems to be some kind of intermittent problem, would it be better to have the rvs4000 reserve an ip address for the two wap4410n? Note that I did try this, but after adding the two reserved ip addresses (192.168.1.101/103) and clicking on "save", the rvs4000 rebooted and came back up without the two reserved addresses...
i set up the WAP4410N and it can be connected with our router. But it's not protected by our password, but once i have set the password of WAP4410N by changing the security mode to WEP, now i will prompted to password when I connect the AP, but it shows limited connectivity, I can't even access my local LAN resources at all.
View 2 Replies View RelatedI have a WAP4410N and would like to turn down the power output below 100%.
It has a very strong signal, and is covering our small office and half the parking lot.
In the Administration Guide, under FAQs, it mentions a setting for output power but I cannot find this setting.
The SW version is 2.0.0.5, and that seems to be the latest version - the file I downloaded is WAP4410N-fw-2.0.0.5-K9.img but I haven't installed it yet.
I can't configure the SSID more than one in the web UI of the WAP4410N. Except I can type the first SSID1, the rest SSID2 - 4 are grey which not allow me to type in anything. ( See attached the screen shot ) My current version is 2.02.1 and I was using IE8 under windows 7.
View 3 Replies View RelatedWe are trying to setup a WAP4410N with 2 SSID's. One SSID for our private network and the other for guest internet access. On the VLAN and QoS page there is a setting for priority. What would be the suggested values for this setting? We obviously want our private network to receive priority over our guest network.Also, does VLAN Tag setting need to be on Tagged to determine private from guest traffic?
View 2 Replies View RelatedI can be connected to the internet (i.e. surfing, emailing) and suddenly loose my connection. I can then ping sites but not be able to access via IE or Firefox. I am running Windows 7 Home Premium and Norton. I have had the problem on multiple networks. I have DSL at home and connect wireless to the network. When this occurs my wired machines still work fine.
View 3 Replies View RelatedI want to configure same internet setting 500 system, Like,active x control setting
View 1 Replies View RelatedI need to configure a WAP4410N for use on a small, very simple business network. There should be a corporate WLAN and a guest WLAN. The corporate WLAN should allow anyone connectd to it to access resources on the domain.
In front of the WAP is a cable modem/router and a basic Level 2 (web managed) switch. What do i have to do to segregate the corporate and guest networks.
I thought I would add the corporate WLAN to VLAN1 (assuming the default VLAN in the switch is VLAN1). Then I figured I could create the guest WLAN and assign it to VLAN2 which which will be controlled entirely by the 4410N (DHCP, DNS, etc.) Does this sound like the right way of going about things?
I want to configure two AP WAP4410N in Bridge Mode and I don´t find the correct configuraction tips.
View 11 Replies View RelatedWAP4410N / configure dhcp OR dhcp CLIENT?
View 3 Replies View RelatedI have AP1 setup with WPA2-Enterprise. How would I setup AP2 (WAP4410N) to be a repeater for AP1?
View 1 Replies View RelatedIm having problems with setting up my cisco WAP4410N as a repeater to extend the signal of cisco E2500.It works fine when there is no password to be set on both devices. But when either one of these devices had beenset a password on it, then WAP4410N failed to extend the signal of E2500.
I tried steps as below:
1. Same password type in WAP4410N and E2500.
2. Different password type in WAP4410N and E2500.
3. Set password in WAP4410N ONLY.
4. Set password in E2500 ONLY.
All steps above makes WAP4410N fail to extend the signal range of E2500. WAP4410N successfully works as a repeater to extend the signal of E2500 when there is no password to be set on both devices.
I have instaled free vpn software from logmein hamishe but do not know how to surf internet.
View 1 Replies View RelatedI set up my D-Link DIR601 and set the password for the internet, though I can't surf on the internet. but I can connect, like it says im connected but it won't allow to surf.
View 1 Replies View RelatedHow can i configure AP (WAP4410N) to Support Roaming?
View 2 Replies View RelatedI'm having trouble getting any web browser to work/recognize my connection. I've confirmed that I am indeed connected to the internet (I know this because, for example, I have no problem at all downloading games via Steam). For some reason, though, when it comes to surfing the web using a browser it's as if I'm not connected (even Steam can't load the Store page, I can only download games via the Library).I moved an infection a week or two ago, and I suspect it altered something that is causing this issue. I did get some advice to open the browser and go to Tools>Internet Options>Connections>Lan Settings and make sure "Automatically detect settings" was checked, and "Use proxy server for your LAN" was not checked.I did this, and in fact "Use proxy server" WAS checked while Automatically detect settings" WAS NOT checked.
View 19 Replies View RelatedI cant surf the net on my Galaxy S2 through my home wifi connection but I can access files on my phone through Kies Air wirelessly from it. How do I fix this?
View 10 Replies View RelatedMy question is if I can configure 3 ssid, for 3 different VLAN and add the DHCP address from a WAP4410N AP, when you upgrade to the latest version of IOS I can have this functionality?
View 2 Replies View Related: Saved
:
ASA Version 7.2(4)
!
hostname ciscoasa
domain-name default.domain.invalid
enable password EhxQ5dBfvkyaUj52 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.10.8 W2K3-X32-SP
[code]....
I have a problem with a dmz vlan. I can´t surf over internet on a remote host.The dmz vlan links with remote network on host 192.168.20.3 .
INSIDE (192.168.10.0) -------------- Outside (88.88.88.0) -------------- DMZ (192.168.20.0)
^
|---------- Remote network (192.168.9.0)
I have the following equipment:
Cisco 871W router
2x WAP 4410N APs running 2.0.3.3
I currently have 1 AP connected to the router via copper. The AP to AP link is over 802.11. I have attached a diagram reflecting the current topology.
The AP-to-AP link will come up utilizing B/G/N mixed mode; however, the connection is basically unusable. About 30% of the traffic is dropped, while the packets that do make it have a consistently volatile latency, anywhere from 15 to 1500 ms. I have had success using G-only and B/G mixed. The link is stable (I have had the best results with B/G). The problem is, I didn't buy the 2nd 4410N to run the G protocol. I would like to connect the APs running either B/G/N (hopefully negotiating to N) or N only. I am wondering if there is a certain configuration I can utilize (perhaps using WDS repeater or bridge versus Wireless Client/Repeater?), or a firmware upgrade set for release that can make this happen for me.
Ok on my new PC,,OS is windows xp..I works fine..connect to pppoe and can surf internet perfectly.But on my old pc,,it can only succesfully connect to wan miniport pppoe but cant surf the internet..its OS is Windows Vista home Prem.The old pc was my first pc(notebook) and last time I used it was on 2009..it was using Atheros AR8131 PCI-E Gigabit Ethernet Controller connection and I forgot what modem I used..but now I bought TP-link TD-W8901G and I use for ADSL connection.My new pc works fine because it was setup proffesionaly by my friend..it also still needs Atheros AR8131 PCI-E Gigabit Ethernet Controller connection to connect ADSL Wan Miniport PPPoE..but I repaired my old pc too late..and he didnt configured it..so I setup myself..all the PPPoE adsl connections.And so its succesfully connected to WAN miniport PPPoE..but I can surf the internet..The old pc also needs Atheros AR8131 PCI-E Gigabit Ethernet Controller connection for me to connect ADSL Wan Miniport PPPoE..but all that was succesfull.
View 6 Replies View RelatedI'am having problems when connecting to the internet. I'am running Win7 64-bit and i have Belkin USB wireless adapter( Belkin surf N150) When i first bought the adapter it didnt connect to internet, so i though it is not working and i got it replaced. I got the same problem with the second one as well, and then i have changed the wireless mode on the device manager from: IEEE 802.11b/g/n to: IEEE 802.11b and eventually i have connected to internet without any errors, but in this mode the internet is unbelievably slow which is very slow when compared to another wireless mode where i have changed it from. So my question is why i can't connect to internet IEEE 802.11b/g/n in this mode? The weird thing is that some times it connects to internet with no error and dissconnects again in a short while. Also when the windows tries to repair it, i get this report:
Windows Network Diagnostics Publisher details
Issues found
Problem with wireless adapter or access pointProblem with wireless adapter or access point Not fixed
Refer to Windows Help and Support for more information about wireless connectivity problems Failed
Reset the wireless adapter Completed
Investigate router or access point issues Completed
[code]....
I am having Inspiron N4010 for almost an year now. I have had many troubles with this but never with internet connectivity. Last week I saw myself not being able to be connected to internet through wireless or wired network while everybody else was connected and surfing. I just thought it to be a small problem and the problem seemed resolved that very day itself on its own.
But today this computer has simply failed to get connected. it does get connected, open a page or two and then again refuses to connect. On the problem diagnoses from network sharing center, it was showing that the websites are not responding, then it started showing that DNS server was not responding while all my setting are correctly configured. I pinged gateway and it responds but on pinging some website there is no response at all. It s a problem with my laptop only as everybody else are using internet very well. I am using internet through my WiFi enabled cell phone using the same connection and router that i use for my laptop. I need an urgent solutions as I have to meet some deadlines regarding assignments.
I just purchased a WAP4410N yesterday and connected it to the switch. I can see the WAP4410N, can connect to it, but cannot connect to the internet. I thought this was enabled out of box. What do i need to do in order to activate internet connectivity?
View 1 Replies View RelatedI have a WAP4410N that only allows my laptop local access, no Internet. Here is the scoop:
- Other users connect to the WAP and get Internet access
- Laptop connects to many other networks and has Internet access
- Laptop is running Vista
- ipconfig /all has address, mask, gateway, DNS, and looks normal
- Adapter is Atheros AR5007 802.11b/g with latest drivers
I purchased a WAP4410n for our small office to provide wireless access to our internal network to laptop users. I have configured the device as simplistically as is possible, but although I can get my laptop to connect to the AP (verified by managing the device wirelessly as well as by pinging the IP address) I can not get to any other IP address on my internal network nor the internet.I gave the device a static IP address - 192.168.1.50 subnet 255.255.255.0 with a default gateway of 192.168.1.254 which is my 2811 router. I set up a WPA-secured SSID.
A second problem I have is that if I set up my laptop wireless card to get its' IP settings form a DHCP server, it picks up a 169.xx.xx.xx ip address - it is as if the AP is not passing my DHCP broadcast / response through.
I've got a HTTP Redirect to a dedicated html site with our internet usage policy set up on multiple WAP4410N access points.This is working like a charm with laptops, but not with internet radios. They can't connect to the internet probably freezing on the http redirected site.Is there any way to exclude these devices from the redirect?
View 3 Replies View RelatedWe have 4x WAP4410N access points 1 AP & 3 Repeaters, this works perfect. The situation at the moment is that the internet connection is plugged in with a cable on the AP but the question is that if it's possible to plug the internet connection into one of the repeaters?
After that are we still able to use the internet over al four access points?
I woke up this morning to find that I cannot surf the web anymore. I was able to last night just fine. My set up is this: Verizon Fios router(192.168.1.1)> Netgear gigabit switch> SMC router smcwbr14s-n3 (192.168.1.201) the Fios router is has a build in wireless but is in another building and i am not within range of it. I have a cat 5 cable that run between 2 house's... the cable comes into my house and into my switch then to my SMC router (smcwbr14s-n3 ) that is running in bridged mode to function as an AP. I can connect to a lan port on the switch or router and connect to the web (im currently in a lan port now.) Here's the thing, I can still connect to the wireless, it's just so slow (1Mbs -6Mbs)that i am unable to get anywhere... I do have security setup (WPA2) an im going to kill that to see if it resolves the issue... but it has been working fine with the current security setting for the last 5 months, so i dont really thing that is the issue.
View 3 Replies View Related