Cisco Wireless :: WLC2504 - Network Lan Sharing Not Working?
Oct 29, 2012
1) We have client setup, which has all PCs in Workkgroup , client has network sharing enable in LAN . Its work well in LAN , he don't have Local DNS , still he is able to ping or access sharing using device hostname
2) When Client moves into Wireless , he is not able to ping or access sharing using Hostname , but if used the ip details he is able to ping and do sharing using IP address onlye.
My Wireless Setup has WLC2504 and LWAPP Access Points.
View 5 Replies
ADVERTISEMENT
Jul 8, 2012
I am having issue with integrating WLC2504 with Win2k8 server NSP radius server.
View 3 Replies
View Related
Mar 18, 2012
Can we change the internal web authentication for guest network to use http instead of https?
View 3 Replies
View Related
Sep 23, 2012
I tried searching google and Cisco Home Community for this answer, but no luck. Maybe I didn't phrase my search correctly. I have an external drive connected to a mac mini which is shared on the network. When transferring folders to or from that external drive, our internet connection stops working until the transfer finishes, then comes back up. I've tested this in a variety of ways. Any transfer of data from shared folders in any combination of devices causes internet to stop working both on wired and wireless devices until the transfer is done, then they all work again. Router firmware: 1.0.03.
View 9 Replies
View Related
May 23, 2013
I have WLC 2504 and AP3502I . AP can not join wireless controller .
*May 24 16:33:51.871: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*May 24 16:33:51.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 10.80.90.99 peer_port: 5246
[code].....
View 9 Replies
View Related
May 18, 2013
I need urgent support on creating SSID as layer 2.We have cisco WLC2504 and 1602i access point. In our network we have in gate for guest.I want to create one ssid and bind with vlan only. We can not creat interface on WLC b/c of static IP.
View 3 Replies
View Related
Nov 9, 2011
I have two Wireless LAN Controllers 2504 and 8 APs 3502e. The WLCs are running software version 7.0.116.0. The problem is that I don't have the mesh option to configure indoor mesh inside the controller. In chapter 9 of Wireless LAN Controller Configuration Guide, Release 7.0.116.0 says that I have to go to Wireless Menu and select the AP. When I am inside the AP general page, the guide says I have to go to the Mesh tab, but that tab doesn't appear in the controller GUI. Do I have to use another image in the controller? Or do you have to use an special mesh code or something like that? Because in the download page of the controller it only appears the 7.0.116.0, two more new versions but there is nothing about mesh image.
View 5 Replies
View Related
Aug 13, 2012
I have the problem that the AP1130 can not join to WLC2504.
Console Messages of AP1130:
*Aug 14 09:34:54.029: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 14 09:34:54.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.x.251 peer_port: 5246
[Code].....
View 10 Replies
View Related
Oct 25, 2011
I have few question with WLC 2504 with 25 License AP. Our customer have SSID around 30 SSID then, is it possible to create WLAN around 30 SSID on WLC 2504? becuase i had tried to do it on WLC4404-25 License that can do or create WLAN with 30 SSID.
View 12 Replies
View Related
Jul 4, 2012
configured Cisco 2504 WLC with 1142 Aps... Guest wireless works fine
for the staff wireless I wanted to authenticate with 802.1x & Radius. So configured an external Radius server (Imprivata) and configured the 2504 Radius options for the extenal server.( Layer 2: WPA2-AES & Auth Key Mgmt: 802.1x )
When I connect a client to this wireless, the authentication fails, I wonder whether it is because of the client side settings..
Which trusted Root Certification Authorities need to be checked?
View 3 Replies
View Related
Jan 22, 2013
Every time I power down my WLC2504 controller and then back up, the time reverts back to the year 2000.The APs can't join the controller, due to certificate errors, until I reset the clock. This problem just started recently.
View 6 Replies
View Related
Mar 12, 2013
how can i replace my wlc2504 to a WLC5508 without disconnecting everybody, i have 3 SSID, on different VLAN.. I want the WLC5508 to be the main WLC, so i can remove the 2504 from the network. On the WLC5508, it will be the same configuration of the 2504. Is there a procedure or a wiki on such operation?
View 8 Replies
View Related
Jun 22, 2011
I wanted to setup a home network for primarily sharing my music, pictures and videos.I have a PS3 which can stream the video/music and display the pictures from a media server to my TV.I was wondering between NAS and a desktop computer? and wanted to know which was the better or cheaper solution? (2 much 2 ask for both)
Main Issues
--Will NAS work with PS3?
--Incase of a computer, i know i will be able to use logmein or gotomypc to Download files directly to that machine even when im not home and when i do get home its ready to go. Can the same be achieved with a NAS?What else should i consider? i.e. pros and cons of both.
View 6 Replies
View Related
Aug 13, 2006
I have 3 computers, all Macs. Two are hooked into my WRT54GP2 via ethernet cables, and one is using WiFi (Airport Extreme). All get an IP number from the router via DCHP (no hard numbers). The router is also hooked up to a Motorola Surfboard cable modem.The two Macs using ethernet have no problems at all, and can access the internet and share files and printers. The WiFi Mac, however, can access the Internet fine, but cannot mount the other machines as file servers. It doesn't even ping them. What is going on in the setup of the router that is preventing the ethernet machines from being seen properly by the WiFi Mac?
View 6 Replies
View Related
Nov 30, 2012
Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Alice (Telecom Italia)
I have just bought this new device, installed, DSL is working fine but not the USB printer sharing. Allways tells me: "This system was not supported yet." Here is the message box: usb_printer_error.JPG.I have a HP DeskJet 1050 and a Canon Pixma MP150 machine. I know, the HP is not in the supported printer list, indeed Canon is.
View 13 Replies
View Related
Aug 9, 2011
Trying to create a network for file sharing, as have upgraded the 'server' (part of a Workgroup, not a Domain) from WinXP to Win7 and experienced problems ever since. Ironically the problems haven't mainly been with sharing files between Win7 and WinXP systems, but between 2 Win7 systems. I bought a new Win7 laptop and tried to connect it to the server, but it hasn't had Read/Write privileges over the files in the Win7 server. Entering a username and password to gain access to the servers folders has not been a problem, and as far as I know, opening files such as documents has not been a problem either. However, when trying to save an edited document, access is denied, and if I try to open an executable file (this is necessary for a node installation), it prompts me for a network password. Every combination possible of username and password from the 2 systems (including '' or 'SYSTEMNAME' before the username) has not worked. I tried syncing the times which was apparently a previous problem, but to no avail. I am unable to access Local Security Policy, as the server is running off Home Premium. I have tried creating a new workgroup, removing and changing passwords, enabling guest access to the network through the Windows Resource Kit Command Shell, creating identical users on both computers, but nothing appears to have worked.
View 1 Replies
View Related
Mar 3, 2012
I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies
View Related
Apr 21, 2013
Im on windows 7, I was able to view people on the network, able to access their public folders, but all of a sudden when I click on network, it just says at the top "Network Discovery and file sharing are turned off. Network computers and devices are not visible, Click to change..." I click on it and it doesn't do anything at all, same message comes on. SO i thought Ill change the settings, I see that Network Discovery is off so I turn them both on, save changes and then try again, same message appears, I go back to settings and see that they are switched off again, it doesn't stay on.
View 6 Replies
View Related
Jul 1, 2011
i have previously never had a problem setting up a network at home enabling sharing of files and printers with up to 4 computers with them all using all the resources/printers of each computer.i have now just 2 computers my main computer can use resources of my other computer, but this is not reciprocated.pc 1 can access pc 2 with no issue pc2 can not access pc1 unless i drop a shortcut onto the shared docs of pc2.
things i have tried:
- turning off firewalls
- running ms networking tool
- maually setting up a network
- connecting pc2 to pc3 with no issue with recripocal sharing of files/printers etc
- switching off file sharing and back on
- numerous pc restarts
- ensuring pc names/workgroups etc are correct
i am at a loss as to how i can get pc2 to start using the printer on pc1; i have just swapped pc2 for a different machine and the ame problem exists so the problem, as far as i can tell, must be with a problem on pc1 not allowing access; when you try and click on pc1 as a workgroup pc it denies access.
View 19 Replies
View Related
Dec 20, 2011
I have my main pc downstairs, which is choc full of media files, work documents and the likes, and my laptop upstairs which is next to empty as I only use it for work/watching things. My issue is, on the main pc I have downstairs I have a few folders shared, completely open to everyone on the LAN. Few videos, pictures etc. I used the exact same sharing method for each folder I wanted to share, yet, when I get upstairs on the laptop, I can see the folders I've shared, but can only access like, 2 or 3 of 6 folders, the rest tell me; 'Windows cannot access \PCHEREFOLDER HERE, you do not have permission'. I've made sure of permissions etc on my main rig, tried unsharing and resharing the folder but to no avail, both have systems have different names, environment set to home etc? Homegroup wont work for some reason, both systems seem to think they're a part of a homegroup that didn't/hasn't ever existed and how to delete the homegroup from the network.
View 4 Replies
View Related
Apr 10, 2012
I've set up a WLC2504 with interface "mgmt" and "guest" (2 different VLAN IDs) both configured on port1.Now I'd like to be able to connect to PoE ports (port 3 and 4) 2 LAPs which should be able to get IP addresses from the DHCP as if they were connected to port1.
View 14 Replies
View Related
Oct 13, 2012
I have a laptop running windows 7 and everything was working fine for file and printer sharing but all of a sudden the network printer just came up as offline and I can't access the network drive/printer on my Laptop but on my desktop where I have the printer plugged into everything is fine and the printer is online and is being shared. Both computers are running windows 7 and when I run the network diagnostics on the laptop it just says file and print sharing resource ( my PC ) is online but isn't responding to connection attempts
View 2 Replies
View Related
Nov 26, 2011
the download speed of my downloads has been very slow, and most of the RAR files I download get RAR CRC errors like theseMy desktop has no active firewall on, and is clean from Maleware.What could be the problem with so many bad CRC files being downloaded?
View 1 Replies
View Related
Jun 17, 2012
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft� Windows Vista� Home Premium, Service Pack 2, 32 bit
Processor: AMD Athlon(tm) Processor LE-1660, x64 Family 15 Model 127 Stepping 2
Processor Count: 1
RAM: 2045 Mb
Graphics Card: NVIDIA GeForce G210, 512 Mb
Hard Drives: C: Total - 292284 MB, Free - 43340 MB; D: Total - 12958 MB, Free - 1819 MB;
Motherboard: PEGATRON CORPORATION, NARRA5
Antivirus: AVG Internet Security 2012, Updated and Enabled
So here's my setup:Computer A is connected directly to a cable modem box via USB. Computer B (which is sometimes a laptop and sometimes a desktop) is connected to Computer A and shares its internet connection via Ethernet because I am too cheap to buy a router.A few days ago we borrowed a Belkin wireless router so we could have both desktops, the laptop, and my fiance's iPod Touch access the internet at the same time. That worked fine but once we returned the router and tried to put everything back to normal, it didn't work. The only computer able to access the internet is Computer A (or whichever one is directly connected).I tried resetting the modem and restarting both machines. I tried disabling all of the connections that showed up from using the router.Windows states that the IP isn't properly configured or something of that nature. I tried setting it to automatically set the IP but to no avail.Here is the part that really confuses me - I can access Computer B from Computer A via LAN using the ethernet cable, so the connection between the two computers is fine.
View 4 Replies
View Related
Mar 13, 2012
setting up a 2504 on a 2960 switch. The management interface is up and pingable, and from the WLC we can ping vlan 20 (our wireless client vlan) gateway. However, when we create the vlan20 interface on the WLC, give it a valid address and assign it to a port, we can no longer ping the vlan 20 gateway from the wlc, nor can we ping the vlan20 interface from a PC. I’m told the 2960’s don’t do dot1q trunking…
View 6 Replies
View Related
Dec 13, 2011
I'm running into several issues with certain .AVI files I've been downloading from MegaUpload, happening on two computers.Upon download of the video, Windows Media Player won't play it, Media Player Classic brings up AVI Chunk Viewer instead of playing it, and VLC offers to fix it but only manages to make a few seconds of it play (out of ~15 minutes).I can open it in VirtualDub and export as AVI, but the quality becomes ruined. Several multicolored glitchy looking boxes cover a lot of the screen periodically which wouldn't normally be there. This shows up before export as well.
View 1 Replies
View Related
Dec 4, 2011
I got a set of dhcp pool in one 3750 attached to diferent Vlans in the network, the wired network works fine, you can get from any switch port across the LAN a diferente VLANs IP. In my wlc2504 I got 5 WLANs with the DHCP server pointed to the VLAN in the 3750, but I just got one set of ip when i tried to connect to diferent WLAN, without connectivity, I can see all the Ap's, and ping the VLANs in the 3750,
View 4 Replies
View Related
Jan 27, 2013
I have a question about managing the Access Point:
-WLC2504
-AIR-LAP1262N-A-K9
First: I need the access point works by period, example: 08:00AM - 06:00PM after that disable the radio and return work next day at 08:00AM
Second: Also, if the radio no activity for a long period (e.g 60 or 120 minutes), disable the radio interface.It's possible with the WLC? Or maybe need implement one NCS?EnergyWise Technology - but, I only need "shutdown" the radio not the Access Point completely.
View 9 Replies
View Related
Mar 20, 2011
can my files,folders and videos be accessed into by sharers when on network discovery?
View 1 Replies
View Related
Jan 9, 2013
I have a PC that connects to a wireless connection. I would like to share this connection with MORE THAN ONE PC. I have read it is possible to share it with ONE other PC via a crossover cable.I would like to share this to a router so that the PCs connected to the router can use this connection. Is this possible?If so, what would I need?(Other than a crossover cable and router)Side note: I'll be sharing this connection to a wireless router - so I'm hoping to basically relay the connection that way.I know it is possible to buy extenders that extend the range of wireless connections, but this is where the restrictions come into play...-We are not able to network these computers on the wireless network, as we do not manage it and have some quite strict privileges.-The router will also be used to share a hard drive via USB.
View 2 Replies
View Related
Oct 19, 2012
I have a wireless router for my internet connection and network sharing. I also have a tenant in the basement who I allow to share the wireless connection. I have four PCs that connect wirelessly to the router, one with Vista, the others with XP. Is there anyway that I could share drive contents on my PCs over the network whilst ensuring that the tenant couldn't access these files?
View 3 Replies
View Related
Jan 20, 2012
I have recently upgraded my router to a Belkin N750 DB and am having issues getting remote desktop connection working. Previously I had a Netgear router and it was working no problems at all.I have port forwarded (virtual server on Belkin) port 3389 TCP to the servers IP address.I can get Remote desktop connection to work when I am within my LAN by just typing the computers name.However when I try to connect via the IP address, as I would if I were away from home, then I get the message that says "remote desktop cannot connect for one of these reasons
1) remote access not enabled (it is because it worked before)
2) remote computer is turned off (no it isn't)
3) remote computer is no available" (yes it is cause can connect from LAN)
Turned off static IP for my server and let the router assign IP, and changed the IP address in the port forward, same, no connection.Double, triple checked my IP address, as this obviously changed when I plugged in the new router.Have updated to latest firmware for router and NIC.
View 14 Replies
View Related
Aug 11, 2012
I'm sure this may appear to have been asked before but I've scoured the Internet and can't find anything exactly applicable to the setup I'm trying to achieve. I had a sky ADSL connection in my living room that had my tv, ps3, NAS and netbook wired in. I've since changed to a sky fibre connection but this had to be installed in the master phone line which is upstairs. This obviously isn't a problem for all of the wireless devices around the house including the netbook and ps3 in the living room. The NAS and TV are still wired to the old router so can see each other with no problems. Any pc trying to connect to the NAS can just switch to the old router via wifi if desired. The only problem I have is that the TV can no longer access the Internet.
I initially tried to use ICS on the netbook (it's left on permanently) - it's wired to the old router and wirelessly connected to the new one. This appeared to be working for a while but is no longer playing ball. I've tried bridging the connections and the tv and NAS both had Internet access but it's very sporadic.Is this a reasonable setup or should I be looking for another solution? I can specify a manual ip, subnet and default gateway on the tv if necessary - I was going to point it towards the bridge's gateway but I don't know about IP?
View 1 Replies
View Related
