Cisco Wireless :: WLC2504 - WLAN With Win2k8 NSP Not Working

Jul 8, 2012

I am having issue with integrating WLC2504 with Win2k8 server NSP radius server.

View 3 Replies


ADVERTISEMENT

Cisco Wireless :: WLAN Support For WLC2504-25 License

Oct 25, 2011

I have few question with WLC 2504 with 25 License AP. Our customer have SSID around 30 SSID then, is it possible to create WLAN around 30 SSID on WLC 2504? becuase i had tried to do it on WLC4404-25 License that can do or create WLAN with 30 SSID.

View 12 Replies View Related

Cisco Wireless :: WLC2504 - Network Lan Sharing Not Working?

Oct 29, 2012

1) We have client setup, which has all PCs in Workkgroup , client has network sharing enable in LAN . Its work well in LAN , he don't have Local DNS , still he is able to ping or access sharing using device hostname

2) When Client moves into Wireless , he is not able to ping or access sharing using Hostname , but if  used the ip details he is able to ping and do sharing using IP address onlye.
 
My Wireless Setup has WLC2504 and LWAPP Access Points.

View 5 Replies View Related

Wireless :: Wlan Is Not Working With Siemens Gigase568?

Aug 11, 2011

wlan is not working vth siemens gigaset se568 modem.when trying to connect wlan then the indicator of wlan turns on and suddenlt it goes to off

View 1 Replies View Related

Dell Wireless WLAN Controller Closed And Stopped Working

Jan 9, 2011

I have a Dell Studio 1537 running on Windows Vista? my computer stopped being able to connect to the internet a few days ago and a "Dell Wireless WLAN Controller closed and stopped working" (or something along those lines) box would keep on popping up. I did some reading around on the internet and decided that maybe I needed to update the "drivers" for it so I went to the Dell website and downloaded the most recent version for my Dell Wireless 1510 WLAN mini card...that didn't seem to work any after I installed it. So I went ahead and uninstalled it (I assume I must have uninstalled something I shouldn't have) and now I'm stuck at the same problem. I can't connect to the internet!In Network Connections, it continually says that "Windows cannot find any networks". In Device Manager, under Network Adapters, it doesn't list the card there, although it lists "Broadcom Netlink (TM) Gigabit Ethernet". And from some suggestions I found on the net, I tried ipconfig/all in the comand promt and it says "media disconnected".

View 6 Replies View Related

Dell :: Wireless 1500 WLAN Card Utility Not Working?

May 31, 2011

I have a Inspiron 9400/E1705 laptop with the Dell Wireless 1500 802.11n WLan card when I try to use the utility I get an error message that the internal settings are bad and to restart the computer to fix. It does not fix this. I am currently using the windows wireless to control the card. Is there a way to fix this, It used to work fine just when I downloaded the R151519 update now even when I use a previous update I still get this error. The driver is Broadcom dated 10/12/2006 version 4.100.15.5

View 3 Replies View Related

Cisco Wireless :: AP3502I-E-K9 Cannot Join WLC2504

May 23, 2013

I have WLC 2504 and AP3502I . AP can not join wireless controller .
 
*May 24 16:33:51.871: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*May 24 16:33:51.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 10.80.90.99 peer_port: 5246

[code].....

View 9 Replies View Related

Dell :: Latitude E6410 - DW WLAN Card Not Working - Wireless Adapter Doesn't Exit?

Mar 10, 2012

I haven't installed anything new lately, nothing that would affect the wireless, but my wireless suddenly stopped working. My wireless has been working successfully for the past 2 years no problems till now. I have a Dell Latitude E6410 my computer is running Windows 7 32bit. When I open up  the DW WLAN Card Utility it says "There are currently no wireless adapters available and enabled. Please enable any available wireless adapters before accessing this configuration utility.  I tried reinstalling drivers for the wireless but my computer says "no compatible hardware found".

Also the under the wireless adapters section of Device Manager there isn't an adapter for wireless, but there is an unknown device.

Here's a View at my Device Manager [URL]

I've tried to use computer restart magic but no luck there.

Also, my computer is running on a university network. My roommate's wireless is working fine. Also I've already system restored to a point where I know it was working, no luck...

View 2 Replies View Related

Dell :: Inspiron 1525 - WLAN Card Wireless Network Controller Stopped Working?

Jul 2, 2008

I have a new brand dell inspiron 1525 laptop and everytime i boot i get a message "Dell wireless WLAN card wireless network controller stopped working and was closed.
 
A problem caused the application to stop working correctly.Windows will notify you if a solution is available.I use windows vista premium and dell wireless 1390 802.11g.

View 22 Replies View Related

Cisco Wireless :: WLC2504 Can't Create Interface On WLC Of Static IP

May 18, 2013

I need urgent support on creating SSID as layer 2.We have cisco WLC2504 and 1602i access point. In our network we have in gate for guest.I want to create one ssid and bind with vlan only. We can not creat interface on WLC b/c of static IP.

View 3 Replies View Related

Cisco Wireless :: How To Activate Mesh Software In WLC2504

Nov 9, 2011

I have two Wireless LAN Controllers 2504 and 8 APs 3502e. The WLCs are running software version 7.0.116.0. The problem is that I don't have the mesh option to configure indoor mesh inside the controller. In chapter 9 of Wireless LAN Controller Configuration Guide, Release 7.0.116.0 says that I have to go to Wireless Menu and select the AP. When I am inside the AP general page, the guide says I have to go to the Mesh tab, but that tab doesn't appear in the controller GUI. Do I have to use another image in the controller? Or do you have to use an special mesh code or something like that? Because in the download page of the controller it only appears the 7.0.116.0, two more new versions but there is nothing about mesh image.

View 5 Replies View Related

Cisco Wireless :: Aironet 1130 Can't Join WLC2504?

Aug 13, 2012

I have the problem that the AP1130 can not join to WLC2504.
 
Console Messages of AP1130:
  
*Aug 14 09:34:54.029: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 14 09:34:54.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.x.251 peer_port: 5246

[Code].....

View 10 Replies View Related

Cisco Wireless :: WLC2504 - Configure Clients To Access 802.1x?

Jul 4, 2012

configured Cisco 2504 WLC with 1142 Aps...  Guest wireless works fine
 
for the staff wireless I wanted to authenticate with 802.1x & Radius. So configured an external Radius server (Imprivata) and configured the 2504 Radius options for the extenal server.( Layer 2:  WPA2-AES & Auth Key Mgmt:  802.1x )
 
When I connect a client to this wireless, the authentication fails, I wonder whether it is because of the client side settings..
 
Which trusted Root Certification Authorities need to be checked?

View 3 Replies View Related

Cisco Wireless :: WLC2504 - Controllers Loses Current Time

Jan 22, 2013

Every time I power down my WLC2504 controller and then back up, the time reverts back to the year 2000.The APs can't join the controller, due to certificate errors, until I reset the clock.  This problem just started recently.

View 6 Replies View Related

Cisco Wireless :: Replace WLC2504 To WLC5508 Without Service Interruptions?

Mar 12, 2013

how can i replace my wlc2504 to a WLC5508 without disconnecting everybody, i have 3 SSID, on different VLAN.. I want the WLC5508 to be the main WLC, so i can remove the 2504 from the network. On the WLC5508, it will be the same configuration of the 2504. Is there a procedure or a wiki on such operation?

View 8 Replies View Related

Cisco Wireless :: WLC2504 - Can Internal Web Authentication Be Used For Guest Network

Mar 18, 2012

Can we change the internal web authentication for guest network to use http instead of https?

View 3 Replies View Related

Dell :: Inspiron 1520 - 1390 WLAN Card Wireless Network Controller Stopped Working And Closed

Feb 6, 2010

I regularly get this message (but not everytime) when I start up Windows Vista Home Premium 32-bit.

"Dell Wireless WLAN Card Wireless Network Controller stopped working and was closed.a problem caused the application to stop working correctly. Windows will notify you if a solution is available."

 Then I get this following message:"Solution Found: Address a problem with your WLAN card.Your WLAN card has stopped working properly. This is a network adapter that allows your computer to connect to a wireless network. To find out if an updated version of your WLAN card is available, contact your device or computer manufacturer."The strange thing is even though I get this message I am still able to connect to the internet via a wireless network. So there is no problem as such it is just annoying to keep getting this message when Windows starts up.I have checked on the DELL Support website and I do have the most up-to-date driver already (Or I think I do).

The message refers to my:

Dell Inspiron 1520, Dell Wireless 1390 WLAN Mini-Card (with driver version 4.170.25.17)

View 16 Replies View Related

Cisco Wireless :: Setup A 2504 To Have One Guest WLAN And One Staff WLAN?

Jun 10, 2013

I would like to setup a 2504 to have one Guest WLAN and one Staff WLAN with a controller port for each WLAN connected to different devices.
 
I would prefer to connect the WLC Guest port to an ASA 5510 and the WLC Staff port to an internal 2960S switch. Will this work? I haven't setup a 2500 series controller previously.

View 4 Replies View Related

Atheros AR8151 Wlan Not Working?

Nov 25, 2012

Since a friend of mine logged in at our wlan(with his phone) i cannot connect my laptop with it anymore. Cable-internet is working as usually. I have already deleted all "users" of our wlan at the Fritzbox-site. I also reinstalled some new drivers but they all didnt work. if i search for problems it says "problems with wlanadapter or router". I have also resetted router and adapter. The name of the Adapter is Aeros AR8151 PCI-E Gigabit Ethernet Controller(NDIS 6.20). When im at my friends place wlan works perfectly.

View 1 Replies View Related

DD-WRT Repeater Half Working / Cannot Get WLAN To Function Properly

Jan 13, 2013

I recently made an old router into a repeater by using DD-WRT. It seems to be working fine if I use LAN, but I cannot get WLAN to function properly. When I go to add a virtual interface and all the proper info, I all of a sudden cannot connect to the Internet. More specifically it seems to not assign me an IP address.

View 1 Replies View Related

Cabling / Cards :: Atheros AR5007EG WLAN Not Working

May 15, 2011

Up until a couple of days ago, I could connect to a wireless network no problem. Now, it's as if wireless doesn't exist on my netbook.

Computer: Acer Aspire One Model: ZG5 / AOA150
OS: XP, Service Pack 3
WLAN/Driver: Atheros AR5007EG/v7.6.0.224

I've done the Recovery Console and performed the Windows Registry repairs. I've even reformatted the computer, but to no avail at all. And I've done all the basic troubleshooting and surfed forums for way too long and found no solutions.

So this is kind of a last ditch effort. It still connects to the internet via an ethernet cord, so all is not completely lost, but it kind of defeats the purpose of having a netbook without having wireless connectivity.

View 6 Replies View Related

Dell :: Inspiron 14RN4010 / WLAN Service Not Working

Aug 16, 2012

I have Inspiron 14RN4010 laptop. There is problem of WiFi connectivity for two days now. It was ok before two days. Troubleshooting gives result of "The windows wireless service is not running on this computer", after asking to repair as admin it comes back saying "problem found not fixed"Also trying running service from services commond, but after running the program it stops giving error of "error 999:error performing inpage operation"I have tried installing the driver files, but the problem is still the same.

View 7 Replies View Related

Cisco Routers :: RV220 Host Name Resolution LAN / WLAN Stops Working?

Sep 11, 2011

I'm running a Windows Server 2008 R2 connected via cable to my RV220. The server is hosting several websites running in separate virtual machines. These websites are accessible through a reverse proxy set up on the 2008 R2. In addition the 2008 R2 provides access to storage over Windows file sharing (client backup, file sharing ...). Most of the clients are connected via wireless.My problem is that after some time (~24h) I lose the connection to the services provided by the 2008 R2 server as a result of (host) name resolution has stopped working. This only happens for wireless clients. Wired clients are not affected.To give more details: Network clients connected via wireless can't see clients connected via Ethernet and the network shares are not accessible anymore (even by putting in manually "\hostnameshare", but "\[IP address]share" still works). Being connected via Ethernet the communication between client and server works flawlessly - the server appears immediately on the network device list. The other way around is also not possible: the server can’t see clients connected via wireless. The reverse proxy is still accessible through wireless connection by putting in the IP address, e.g. "http://192.168.1.123/homepage" but "http://hostname/homepage" won't work.A restart of the router will fix things but only for the next couple of hours.

View 4 Replies View Related

Dell :: D820 - 1390 WLAN Mini Card Not Working

Feb 2, 2012

I recently re-installed the driver for the 1390 WLAN Mini Card after not having wireless for a few years, and have a few problems.  In the Windows XP Home Network Connections folder, the  Wireless Network Connection Icon shows, "Acquiring Network Address", but never gets past that.  I ran a diagnostic in the "Dell Wireless WLAN Card Utility" and the card passed all the tests, even though with the card switch in the on position the LED doesn't light (??) 

When I right click on the Wireless Network Connection Icon and choose, "Status", in the "General" tab I can see that the card is sending out packets, but none are being received.  In the "Support" tab under "connection status"  the following appears:  "Address Type":  Invalid IP Address, "IP Address": 0.0.0.0, "Subnet Mask": 0.0.0.0, "Default Gateway": (nothing listed).

Background:  I have a Desktop (no brand) and the Dell D820 connected with a Westell Modem and a D-Link WBR-1310 Router.  Both computers work great connected to the Router with a cable.  Both computers are running Windows XP Home.

The only thing I can think of (and I'm remembering this from 2007 when I purchased the Laptop and had a wireless set up for a short while), is that the Modem and Router were bridged, which is not the case now.  Do they need to be bridged for the wireless connection to work?  Is it not necessary anymore and something called "Double Netting" or something like that is used...

View 1 Replies View Related

Cisco :: WLC2504 And Using PoE Ports In Same LAN

Apr 10, 2012

I've set up a WLC2504 with interface "mgmt" and "guest" (2 different VLAN IDs) both configured on port1.Now I'd like to be able to connect to PoE ports (port 3 and 4) 2 LAPs which should be able to get IP addresses from the DHCP as if they were connected to port1.

View 14 Replies View Related

Dell 1390 WLAN Mini-Card / Can't Connect To DHCP And Port Forwarding Not Working

Dec 22, 2011

The first is I have a laptop running XP with a Dell Wireless 1390 WLAN Mini-Card built in to it. But for some reason when I'm using that wireless connector my computer won't connect to my router and give me a 192.168.0.x address, it gives me a regular IP address. I can surf the net and everything but I can't access files on other computers. But from it it'll allow me to connect to the router admin fine.Whenever I put the mac address in to my DHCP setting on my router it comes up * RESERVED INACTIVE * and never gives my laptop a local ip address.The other problem is on my 192.168.0.2 computer I've tried to set up port forwarding but it won't open the ports. My router is a Motorola SBG6580 provided by my cable company. This particular computer is connected by Ethernet and not Wifi if that makes a difference.

View 2 Replies View Related

Dell :: 1397 WLAN Mini-Card Stops Working Only When Lots Of Data Streaming

May 15, 2013

I have a Dell Studio PC with a Dell Wireless 1397 WLAN Mini-Card. OS is Windows 7 with SP1. Intel Core 2 Duo T5800 2.00 GHz

In general I have no problems with my WIFI with simple browsing and most of my routine activities online. But any time I stream video (like youtube), music or download a large file, my WIFI spontaneously turns off. I need to either restart the computer or put the computer to sleep/wake it up for the WIFI to work again.

I have the latest drivers for the Wireless card. I scanned the forums and didn't see this problem reported elsewhere. I realize this is an old computer so I may have to install an external wireless adaptor, but I wanted to ask around before doing so. 

View 8 Replies View Related

Cisco :: Unable To Connect WLC2504 To 2960?

Mar 13, 2012

setting up a 2504 on a 2960 switch.  The management interface is up and pingable, and from the WLC we can ping vlan 20 (our wireless client vlan) gateway.  However, when we create the vlan20 interface on the WLC, give it a valid address and assign it to a port, we can no longer ping the vlan 20 gateway from the wlc, nor can we ping the vlan20 interface from a PC.  I’m told the 2960’s don’t do dot1q trunking…

View 6 Replies View Related

Dell :: Truemobile 1300 WLAN Card No Longer Working Following Driver Update - Latitude D600

Aug 17, 2009

I have a recently rebuilt D600 running XP Prof XP3 full patched. The machine was a clean build on a new disk about 2 months ago and all has been working well (excepting the Fujitsu HDD which seems to be going bad as I type, but that's a different issue!).i was offer via Microsoft Update: "Dell driver update for Dell TrueMobile 1300 WLAN Mini-PCI Card" 2 days ago (mid August 2009). This is a Dell supplied update distributed via MS. Also offered (and installed) at the same time was "Darfon - Other Hardware - Bluetooth Devices". Since installing these (and the installs reporting as completing correctly) I keep getting:Dell Wireless WLAN Card Wireless Network Controller encountered a problem and needed to close.and Dell Wireless WLAN Card Wireless Network Controller has encountered a problem and needs to close.rror dialogues. These pop up every 30 seconds or so and seem to be related to the Dell TrueMobile 1300 update.Looking in the Windows directory there is no uninstall directory for this update unlike the MS updates. So I now either need to:get the updates to work properly Remove the updates and get back to a working condition if you wonder why I applied the updates...why repair something that's already working...I have had Bluetooth sporadic connection issues with this laptop with a BT GPS unit. The same BT GPS unit works perfectly on a D610 but on this D600 after initial connection there can be repeated connection loss requring the BT GPS unit to be moved around, after which BT connection is re-established only to fail a while later. As the same GPS works without problem with the D610 my presumption has been the issue is a BT stack issue on the D600 BT implementation.

View 2 Replies View Related

Cisco WAN :: WLC2504 Not Accepting DHCP Pools From 3750?

Dec 4, 2011

I got a set of dhcp pool in one 3750 attached to diferent Vlans in the network, the wired network works fine, you can get from any switch port across the LAN a diferente VLANs IP. In my wlc2504 I got 5 WLANs with the DHCP server pointed to the VLAN in the 3750, but I just got one set of ip when i tried to connect to diferent WLAN, without connectivity, I can see all the Ap's, and ping the VLANs in the 3750,

View 4 Replies View Related

Cisco :: WLC2504 Disable Access Point By Period

Jan 27, 2013

I have a question about managing the Access Point:

-WLC2504
-AIR-LAP1262N-A-K9
 
First: I need the access point works by period, example: 08:00AM - 06:00PM after that disable the radio and return work next day at 08:00AM

Second: Also, if the radio no activity for a long period (e.g 60 or 120 minutes), disable the radio interface.It's possible with the WLC? Or maybe need implement one NCS?EnergyWise Technology - but, I only need "shutdown" the radio not the Access Point completely.

View 9 Replies View Related

Wireless :: Which Will Be Better In WLAN

Mar 21, 2011

So which one will be better to use for the better performance when we have 20 computers to connect in WLAN.

View 1 Replies View Related

Wireless :: How To Get A WLAN On The Same Network As LAN

Sep 5, 2012

We have a Sonicwall NSA 3500. We have a seperate interface for LAN and WLAN. The WLAN is set up on a Sonicpoint. Right now, the LAN gives out 10.10.99.x addresses, the WLAN gives out 10.10.100.x addresses. What is the best way to get these two interfaces to give out addresses on the same scheme, ie both LAN and WLAN giving out 10.10.99.x addresses?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved