Wireless :: Which Will Be Better In WLAN
Mar 21, 2011So which one will be better to use for the better performance when we have 20 computers to connect in WLAN.
View 1 Replies
ADVERTISEMENT
Cisco Wireless :: Setup A 2504 To Have One Guest WLAN And One Staff WLAN?
Jun 10, 2013I would like to setup a 2504 to have one Guest WLAN and one Staff WLAN with a controller port for each WLAN connected to different devices.
I would prefer to connect the WLC Guest port to an ASA 5510 and the WLC Staff port to an internal 2960S switch. Will this work? I haven't setup a 2500 series controller previously.
Wireless :: How To Get A WLAN On The Same Network As LAN
Sep 5, 2012We have a Sonicwall NSA 3500. We have a seperate interface for LAN and WLAN. The WLAN is set up on a Sonicpoint. Right now, the LAN gives out 10.10.99.x addresses, the WLAN gives out 10.10.100.x addresses. What is the best way to get these two interfaces to give out addresses on the same scheme, ie both LAN and WLAN giving out 10.10.99.x addresses?
View 1 Replies View RelatedWireless :: Broadcom 802.11b/g WLan Not Starting?
Jan 20, 2011device manager indicates it is disabled, but drivers are up-to-date
View 2 Replies View RelatedWireless :: 802.11b Usb Wlan Driver Windows 7
Feb 6, 2011I need 802.11b wlan usb driver for windows 7
View 2 Replies View RelatedWireless :: Wlan Is Not Working With Siemens Gigase568?
Aug 11, 2011wlan is not working vth siemens gigaset se568 modem.when trying to connect wlan then the indicator of wlan turns on and suddenlt it goes to off
View 1 Replies View RelatedCisco Wireless :: How To Associate WLAN Clients With 802.1x
Sep 17, 2012we have the following situation:
- 2 x WLC 5508 with about 80 - 120 access points (Aironet 3500) each
- 7 x WLAN's with different security settings
- 2 x ACS 5.3
On one WLAN we have the problem, that the students with their own laptops have to enter their AD username about 4-5 time, until they get a successfull 802.1x authentication. The WLAN has the following configuration:
- Hidden SSID
- Only 802.11b/g
- Interface assigned via AP Groups
- WPA2 / AES with 802.1x or CCKM (here I could only allow 802.1x, the clients do not need fast secure roaming)
- Authentication via ACS 5.3 and PEAP
- for more details see screenshots below
Most of the time I can't see any 802.1x authentication attemps on the ACS View, but when there are entries, they are successfull. So in my opinion I think there has to be a problem on WLC side, but I don't know where to search further. We already deactivated the client load balancing in the WLAN, because at the beginning the customer wanted to activate that - but it was clear that there are a lot of clients which had to authenticate multiple times.I know there were some bugs in the 7.0 train, so I upgraded finaly to 7.0.235.0 to overcome this bug here: CSCty07036.To fix the other bug (CSCtt70290) I just disabled all the session timeouts on the different WLAN's.
Cisco Wireless :: WLAN Controller For AIR-LAP1142N-A-K9
Sep 25, 2012I'm new to wireless and I have 7 Cisco 1142N (AIR-LAP1142N-A-K9) APs. But The thing is I have to buy a WLAN controller for these APs. I checked on internet and I found the 2500 series Controllers are compatible with Cisco 1142N (AIR-LAP1142N-A-K9) APs. But I would like to know How can I find the exact supporting version of controller for Cisco Access points?
View 15 Replies View RelatedCisco Wireless :: No Software For Air Mp-20b WLAN Card?
Jul 25, 2012I own a small computer repair company and sold a lot of dell d610 Laptops with a wlan card "air mp-20b" installed. Subsequently three of my customers had hard drive issues and they had to be replaced. To no avail Dell had no drivers for this card and I can't get a straight answer from Cisco on this model or reference it for a software download. What is the actual model that Cisco uses for this device.
View 1 Replies View RelatedCisco Wireless :: 1142N - Different QoS Values In The Same WLAN
Dec 6, 2011Now, with all the unified communications, voice, video and data are in the same device, and I try to give priority to voice and some applications, but in the WLC I can not find the way to mark all that kind of packets.
Is it possible to do that? like in a LAN making the marking as voice, signaling and any kind of application? as I marked in all the LAN.
the equipment:
WLC 5508 v7.0.116
AP 1142N
Cisco Wireless :: AIR-1242AG-A-K9 Mixing APs On WLAN
Jun 12, 2012What would be the ramnifactions of using AIR-1242AG-A-K9 (g radios only: no b clients) and AIR-LAP1231G-AK9 (g radios: only no b clients) with AIR- ANT1728 (non diversity antennas) on the WLAN. Some of the APs 1242/ 1231 will be with in line of site of each other.
View 1 Replies View RelatedDell :: Wireless WLAN On Studio XPS 16 Won't Enable?
May 22, 2010 I have a Dell Studio XPS 16 laptop. I'm very annoyed by how my wireless WLAN card won't turn on.
I've tried pressing the WLAN enable key above the keypad next to the other media keys and it won't show it as being enabled.
I've tried the Fn+F2 combination and it doesn't seem to do anything. It keeps saying that the WLAN card is still not enabled!
I've tried rebooting my laptop as well and it seems to acknowledge the existance of the card
Cisco Wireless :: Accessing WLAN Via AP Air-lap1142n-e-k9
Apr 17, 2012We have a set up which includes several air-lap1134n-e-k9 access points. We're having problems with a specific laptop connecting to the WLAN which is accessible via the AP. We can see numerous different SSIDs available and when we connect to either of the two we have set up it says it is unable to connect. One of the connections, let's call it Internet, has Layer 3 security set up. The other connection, Web, has Layer 2 security set up. The laptop can connect to neither. It can, however, connect to other wifi in the vacinity including a wifi hotspot we set up on an Android phone.
The laptop has an Intel Centrino Wireless-N 1030 network adapter with current drivers. The WLAN's we've set up, Internet and Web, are both enabled for 802.11n.
Wireless :: No Auto Boot Wlan Hp Pavilion Needs To Be Switched Off?
Jan 22, 2012This happened after I put on an ubuntu version called ICE. Now, if I load eg puppy linux the wireless adapter is invisible. I reinstalled Visa and it saw the wlan adapter but doesn't auto recognise now so I have to switch on manually. Can I put in a new adapter with 'n' capability?
View 2 Replies View RelatedWLAN Light Stopped Lighting Up On Wireless Router?
May 18, 2012Yesterday the WLAN light stopped lighting up on my wireless router. The DSL light comes on (green), however, the WLAN light doesn't light up and the 'inetrnet' light stays on red. My laptop is saying cannot detect network, but is detecting other wireless networks in area (so not laptop prob). Did all the unplugging, turning everything off and even pressing the reset button on the back of the router but its still not working. Tried plugging in a USB cable directly from router to laptop and 'internet' light flashed green for 1 second then went back to red and still not working.
View 1 Replies View RelatedConnecting Wireless Network In WLAN Blind Spot?
Jan 11, 2012My parents live in a retirement community that has free wifi. They are in a blind spot and need a rooftop antenna, which has been connected to a laptop. They want a wireless network in their house. Can I just plug the rooftop antenna into one antenna socket of a two antenna AP/Bridge/Repeater? If not, what should I do?
View 1 Replies View RelatedCannot Connect To Internet / Wireless WLAN Adapter Disconnected
Sep 16, 2012So earlier today I purchased a new video card, a PNY Nvidia Gtx 560. After installing the drivers through the disc, I ended up getting he BSOD, and my PC just kept on restarting automatically. I fixed that problem, and found out that I should install the drivers for it through their website instead. So, after restarting my PC yet again, I tried using the Internet (Chrome) and found out that I have no Internet connection. Now, I am writing this on my iPad using the same router and modem that my PC is supposed to be using, but I keep on checking my WLAN adapter and it says that it is Not Connected. Now I have tried every forum, every post, EVERYTHING related to this problem and not a single thing fixes it. Also, when I do the ipconfig, everything says Media Disconnected and that's it. PS, I tried unplugging/plugging back in my modem and router PPS, Is it possible that when installing my new gcard and psu that I may have messed up with something internally?
View 14 Replies View RelatedLinksys Wireless Router :: WRT54GL - WLAN Flashes More Often
Feb 13, 2012I accidentally pressed the front panel button labeled "Cisco Systems" on my WRT54GL wireless router. The button turned to a flashing white which I understand means that it entered SecureEasySetup mode. I then power cycled the router and the front panel button turned back to solid orange. However, now the "WLAN" lamp flashes a lot more often than before even when there are no wireless clients connected. It doesn't seem to be affecting connectivity or performance of my Ethernet connected devices or wireless connected devices. I re-entered my SSID and security key. That didn't curtail the increased flashing of the WLAN lamp. I also tried pressing the front panel button for 5 seconds. This only cleared my wireless settings.
View 2 Replies View RelatedLinksys Wireless Router :: E1200 WLAN Configuration?
Jul 22, 2012The E1200 is connected to a router (BEFSR41) that is acting as DHCP server. So I have disabled the DHCP Server option on the E1200. Once configured, the wireless connection is working by unexpectedly only as guest user (I tried via PC XP, PC Win 7 and IPad) on the guest network. The problem is that once configured, the E1200 is no more reachable unless I reset it and I reconfigure it. If I try to access the IP 192.168.1.1, I get the setup page of the router (BEFSR41) and not the E1200. From another computer the IP Scan discover the E1200 as 192.168.1.103, but I am not able to reach it at that address.
View 5 Replies View RelatedCisco Wireless :: 881w / Configure A Second WLAN For Guest?
Mar 30, 20131 router 881w with a site-to-site VPN connected to a switch and a wireless which allows internal users to access the VPN via wireless (this is like a backup, if the switch fails, then they can use the wireless). Everything's working fine so far. Now I want to configure a second WLAN for guest but I'm not really sure if this configuration will work:
ROUTER:
ip dhcp excluded-address 192.168.100.1 192.168.100.200
!
ip dhcp pool GuestNetwork
network 192.168.100.0 255.255.255.0
default-router 192.168.100.1
dns-server 8.8.8.8
[code]....
If it's not clear I want that everyone that is connected to the guest WIFI receives an IP address from the range I wrote before and then goes directly to the internet.
Cisco Wireless :: WLC 5508 Wlan Stability Is Not Enough For Clients
Nov 8, 2012I have a WLC 5508 with half a dozen LAPs (AIR-CAP3502I-E-K9).They have been working but sometimes clients detect conectivity problems with the wlan.Here is the message log I can obtain from the controller:
View 1 Replies View RelatedCisco Wireless :: 5508 NCS WLAN Template Error
Aug 8, 2012I am trying to apply WLAN template from NCS to two WLCs 5508 and I receive this message."Another WLAN with same SSID and either WPA1/ WPA2/ WPA1+WPA2 is enabled. Please change the Layer 2 security policy."The template has layer 2 security with WPA+WPA2 enable and 802.1x.I have other WLAN template with other name and other SSID with the same security policies with no problem to apply.
View 2 Replies View RelatedCisco Wireless :: 1262 / 3500 For WLAN Between Buildings?
Jul 4, 2012I currently have WLC 5508 and a few campuses with LAP 1142, each with 2-3 vlan. Now one of our campuses have a building thas is a bit far away and needs network (wired). We can't get fiber or TP-cable there in a good way. So the plan is to get two 1262 or 3500 with AIR-ANT5160NP-R antennas and get a wireless link working between the campus and the building. And then connect one of the AP's to a switch in the other building to provide it with wired network.
The problem is that I can't find information on how to do it. Should both APs be in autonomus mode? I probably only need to have 1 VLAN in the other building but I am not sure yet. Is there a problem with transfering several VLAN over the WLAN-link?
Dell :: Connectivity With Wireless 1502 WLAN Card
Aug 6, 2012I just bought the VOSTRO 260S Slim Tower from dell. I have problem to connect to the wireless in my house. I got other labtops and tabs in my house which connect well to the wireless...Here is my ipconfig:
Microsoft Windows [Version 6.1.7601]Copyright (c) 2009 Microsoft Corporation. All rights reserved.C:UsersAnGi3>ipconfig/allWindows IP Configuration Host Name . . . . . . . . . . . . : AnGi3-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoWireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected (code )
Cisco Wireless :: Oeap 600 - Can't Connect To Corporate Wlan
Oct 1, 2011I have some trouble with the setup of an oeap 600 ap. The ap has joined the controller as it should and the remote-lan connection to my corporate network works well, but i can't connect to the corporate wlan.
When i check the event log on the ap it says:
"
*Oct 02 07:36:56.662: (Re)Assoc-Req from 00:1a:73:d2:82:8c forwarded to WLC, wired: no
*Oct 02 07:36:56.665: received assoc-rsp for wireless client, status=0011
*Oct 02 07:37:11.712: DisAssoc-Req/DeAUTH from 00:1a:73:d2:82:8c forwarded to WLC, wired: no
*Oct 02 07:37:11.713: WTP Event: Delete Mobile sent to wlc00:1a:73:d2:82:8c"
and a debug on the controller gives me:
apfMsConnTask_6: Oct 02 08:52:05.034: 00:1a:73:d2:82:7f Adding mobile
on LWAPP AP ec:c8:82:c2:3a:20(0)
*apfMsConnTask_6: Oct 02 08:52:05.034: 00:1a:73:d2:82:7f Association received from mobile on AP ec:c8:82:c2:3a:20
*apfMsConnTask_6: Oct 02 08:52:05.034: 00:1a:73:d2:82:7f Sending Assoc Response to station on BSSID ec:c8:82:c2:3a:20 (s
tatus 17) ApVapId 1 Slot 0
[code]....
Cisco Wireless :: 5508 Bandwidth Reporting By WLAN?
Jun 12, 2013Is there any way to determine how much bandwith users on a particular WLAN (Guest) are using on the 5508 or by any other means?
View 9 Replies View RelatedCisco Wireless :: WLC2504 - WLAN With Win2k8 NSP Not Working
Jul 8, 2012I am having issue with integrating WLC2504 with Win2k8 server NSP radius server.
View 3 Replies View RelatedCisco Wireless :: Not Able To Get DHCP IP Via 2504 WLAN Controller
Jan 7, 2013I have a Cisco Wlan Controller 2504 with 1042N AP (3-nos) every thing was working fine from past 2 months. Now i am getting a issue with clients which are connected to the wireless AP, they are not able to get an dhcp IP address from the 2960 Switch (DHCP Server). The clients are getting IP address as 0.0.0.0. [code]
View 36 Replies View RelatedCisco Wireless :: Disable DHCP Proxy Per WLAN - WLC V7.2
May 16, 2012I have a DHCP server on a WLAN that does not support Cisco's native proxy mode. I need to use DHCP bridge mode for that WLAN only.
How do I disable DHCP Proxy and switch to DHCP bridge mode for one WLAN ?
Cisco Wireless :: Use WAP4410N As Repeater On WPA2 And EAP-TLS WLan
Dec 21, 2010Can a WAP4410N be used as a repeater on an existing WPA2 + EAP-TLS WLAN? The existing WLAN is on a Cisco 871W router; we hope to use a WAP4410N as a repeater to extend it.
I've not had much luck so far with the "repeater" and "WDS repeater" AP modes on the 4410. I'm either configuring it wrong, or perhaps the 871W needs a config tweak? Or perhaps the 871's wireless can't be repeated like this?
Cisco Wireless :: 4404 - Changing WLAN ID On Controller
Jun 17, 2012Our company has 8 4404-100 Cisco wireless controllers and each WLC has 8 W LANs configured. They are all working fine. However, the WLAN ID sequence is not consistent. I'm wondering if it's possible to change the WLAN ID on these WLCs without (or slightly) impacting the users. I don't want to re-configure all the WLAN profiles.
View 13 Replies View RelatedCisco Wireless :: 5508 - WLAN Controller Ip Conflict
Dec 12, 2011We’ve recently installed a 5508 w LAN controller for my organization wireless network and each time devices connect to this wireless network they receive an ip conflict error. All devices conflict with the ip address of IP address 0.0.0.0 with mac address 00-00-00-00-00-00.
All devices event viewer has this TCP error: “The system detected an address conflict for IP address 0.0.0.0 with the system having network hardware address 00-00-00-00-00-00. Network operations on this system may be disrupted as a result.” We previously experienced the same ip conflict with 12000 w LAN network that he had used as proof of concept.
Cisco Wireless :: 1142s - AppleTV Via WLan Controller?
Oct 9, 2011what seems to be a common issue/query regarding getting AppleTV to work via the Wireless Lan Controller.We are running WCS 7.0.172.0, our WISM controllers are on software version 7.0.116.0 and our APs are a mixture of 1140 and 1142s with both 11a/n and 11b/g enabled.
What we are finding is that we are able to stream to the AppleTV box when connected to the LAN and both devices are on the same subnet.however, as soon as we go onto the WLAN ( both devices on the same subnet ) , the end device can no longer see the AppleTV box to stream too.
[code]...