Cisco Wireless :: Which Interface In AP1200 Will Be Used
Dec 20, 2012Which interface in Cisco AP1200 will be used if you want to use the 802.11a standard?
View 4 Replies
ADVERTISEMENT
Cisco :: AP1200 Securing Open Wireless Environment
Apr 26, 2011Need securing a wireless environment in a hotel? The SSID has to be broadcast of course but how can we protect guests from man in the middle attacks, etc.? Currently the environment is all AP1200s with no hardware upgrades in the near future. There is also a 2811 router in place but nothing else. We would love to be able to force users to authenticate with a password in order to get out to the Internet as well.
View 2 Replies View RelatedCisco Wireless :: Command In AP1200 Series - Use Broadcast Using VLANs?
Dec 20, 2012Which command in the Cisco AP1200 series will you use to broadcast the SSID using VLANs?
View 3 Replies View RelatedCisco :: AP1200 - BBSM Fails To Locate Client
Apr 25, 2005i have a bbsm server I'm bringing up on line. Trying to add the first site, i configured everything i think right, but the client gets a network error page, and the event log shows:
EventID:28
Source:BBSM_AtNotify
Description:
Failed to locate client ip:10.233.1.10 MAC: 00 00 00 00 00 db on any network device.
i did a debug on the AP1200 (12.3(4)JA) i am using and see that the bbsm is talking to the bbsm. I just can't figure out what i am doing wrong.
[code]....
Cisco WAN :: 1841 Router - HWIC Interface Card - Cannot See Interface In Configuration File
May 9, 2012i have a 1841 cisco router and i recently purchased a 1 port HWIC wan interface card. My problem is that I cannot see the interface in my config file. Is there something i am missing?
View 8 Replies View RelatedCisco Switching/Routing :: ASA 5505 Cannot Ping From Inside Interface To Outside Interface
May 1, 2012I have a Cisco ASA 5505 and I have my internal and external interfaces configured but I currently cannot ping from the inside to an IP Address on the outside. I had this setup and working and I have another set of equirement that I am replacing that is working with my service provider so I know it is a configuration issue. When I ping 4.2.2.2 for example I get:
Destination host unreachable
Do I need to add a static route from my inside interface to my outside interfaces?
: Saved
:
ASA Version 8.2(5)
!
hostname pxasa
[Code].....
Cisco WAN :: Set Up WAN Interface On Fast Ethernet Interface Of 877 Adsl Router
Apr 9, 2011Is it possible to set up a WAN interface on a FastEthernet interface of a Cisco 877 Adsl Router ?Due to my ISP, i've to use an external VDSL modem and must connect it to my cisco 877 router (and leave it's adsl interface unused).But i don't know how to set up a wan port, other than the adsl interface itself (dialer0), on my cisco.
View 7 Replies View RelatedCisco Firewall :: 5540 ASA Interface Input Error On Outside Interface
May 28, 2013We are having Cisco ASA 5540 having Cisco Adaptive Security Appliance Software Version 8.0(5)23 at certain time of moment daily wer are facing latency and packetdrop wherin when I checked for ASA Interface which gives me " Input Errors" on outside interface ,so can any one tell me what are the causes to get input errors on cisco asa outisde interface.
View 2 Replies View RelatedCisco WAN :: 1T3 / E3 / 2951 - No Interface Corresponding To Module When Show IP Interface Brief
Feb 13, 2012I have a 1t3/e3 card in a new 2951. When I statred the router, I found no interface corresponding to this module when do "show ip interface brief"
View 3 Replies View RelatedCisco Firewall :: PIX 501 / Can Traffic Goes From Inside Interface To Outside Interface
Oct 9, 2011I have Pix 501 firewall and I'm just configuring the device for "Email Server" to allowing POP/SMTP.
Inside Interface Address: 132.147.162.14/255.255.0.0
Outside Interface Address: ISP provided IP address
My question is can my traffic goes from inside interface to outside interface? (because the inside interface address not from 10.0/172./192.168 private address)Also I'm allowing internet from this email server (132.147.162.14) so what my access list to be configured? and what my subnet mask shoud be there?
Pix(config)#access-list outbound permit tcp 132.147.162.14 255.255.0.0 any eq 80
Pix(config)#access-list outbound permit udp 132.147.162.14 255.255.0.0 any eq 53
Pix(config)#access-group outbound in interface inside
Cisco Firewall :: ASA 5550 - Interface Failover / Interface Goes Down
Mar 18, 2013I've got a ASA 5550 firewall interface failover issue. (File attached).
when I shut down the inside interface Gi 1/1 of the left firewall(Active firewall), It failed to failover. but when I shut down the Gi 1/12 of the Core 1 switch, The firewall failover very well.
I followed this guide but I was not able to failover. [URL]
how can I configure so that when the Gi 1/1 or Gi 1/0 interface goes down, it can failover ? Code...
Cisco WAN :: 2900 - Bridge From WIC Interface To Ethernet Interface
Apr 22, 2012Needing to bridge from my wic interface to an ethernet interface on a 2900 series router so that I can pass through the ip address given to the WIC, to my ASA so that I don't have to give my ASA a private range address. (Just like a service provider might do when bringing a T1 with managed router in to my prem)
View 1 Replies View RelatedRelease Interface Loopback Pseudo - Interface 1 / System Do Not Find File
Oct 31, 2011I share a modem and router with my building, and connect to the internet using an ethernet cable which plus right into the wall in my apartment. When I hover over the network/internet icon it tells me that I have a local connection only and can't get online. No changes were made to my computer between it working and not working - I have not installed any new software and the modem+router have not been changed.
When I try ipconfig/release is says it can't perform the operation while the media is disconnected. It also tells me that "an error occurred while releasing interface Loopback Pseudo-Interface 1: The system cannot find the fie specified".
[code]...
Cisco WAN :: 877 - Virtual Interface Goes Down But Not Physical Interface
Apr 5, 2011I have five 877 routers connected to ADSL circuits provided by Vodafone. Each has a VPN tunnel back to a PIX.
Occasionally one of the sites will lose it's connection to the PIX.
When we check the log, we find entries like these:-
Apr 5 01:31:54.085 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to downApr 5 01:33:19.344 UTC: %CRYPTO-
[Code].....
As you can see, the physical interface (ATM0) is not being reported as changing state to down, neither is the Dialer interface.
When the router is in this state we have to SSL to the public IP address of it and manually restart the ISAKMP SA.
When the router sees the ATM interface go down and subsequently come back up, the VPN connection to the PIX also recovers.
So - in a long winded way I think I'm asking....why does the Virtual interface go down and is there anything I can do to stop it happening?
Cisco :: E1/PRI Interface Vs ISDN/BRI Interface?
Mar 3, 2013what difference is between these two ports?
I have a router with ISDN/BRI interface and i am planning to buy router with E1/PRI interface. Will i be able to connect them?
Cisco Wireless :: AIR-LAP1131AG-E-K9 802.11a Interface Is Down
Jan 26, 2013I have a WLC 4402 with many APs connected. Most of the APs are LAP1121 and LAP1131 and are working using 802.11b/g. I tried activating 802.11a but for some reason its not working. I see under the Monitor tab that the AP's "802.11a" interface is "down". I have enabled the radio under the "Wireless" tab. Under all the "WLAN" I have enabled all the radios but still not working. 802.11a" interface is still "down".
The AP Model is AIR-LAP1131AG-E-K9 meaning "ESTI" regulation. Under "Country" I "checked" IL.
Cisco Wireless :: AP 1262 Don't Negotiate With Gig Interface
May 9, 2012I have new 1262 APs, this have Gig Interface, when I connect the AP in my 6500 with PoE Gig Interface, the AP turn on, but the interface never get up. I need to change the speed to 100 in the 6500 switch port, when I do this, the interface become UP.
This is the model of the card WS-X6148A-GE-45AF This is the Switch IOS s3223-ipservicesk9_wan-mz.122-18.SXF11.bin
The controller is 5500 version 7.2
This is the interface config:
interface GigabitEthernet4/36
switchport
switchport access vlan 308
[Code].....
Cisco Wireless :: 5508 - Cannot Connect To Web Interface Of New AP
Mar 13, 2012I am in the process of upgrading our wireless infrastructure from a series of APs centrally managing the infrastructure centrally with the WLC 5508 and new APs (1142). All seems to be going well, the APs see the controller and are downloading the latest information/changes and I can connect to a test network. The current issue I am having is that I cannot connect to the AP via the web interface.
The config for the management interface of the 5508 is:
interface GigabitEthernet4/0/20
description ** Connection to WLC-5508-01 **
[Code].....
Cisco Wireless :: WLC 4404 AP Not Routing Via Second Interface
Aug 20, 2012WLC4404 - United States
Software Version 5.2.193.0
where the new WLAN dosn't seem to be routing... but it's not related to name length (ours only 6 charecters). It's almost seems like the new WLC interface (interface2) isn't configured for the same subnet that it's plugged into, but it is.We actually have 2 WLANS. Alot of the original config was done before my time, between about 3 different people. The original WLAN config works fine, but part of the problem is the WLC4404 was configured our server VLAN, thus when a client gets an IP, they are placed on our main server VLAN. Our WLC4404 is connected to our 6509 in our Datacenter, and we have dozens of PTP T1's to our remote offices, which all have WAPs.On the WLC4404, I've configured a new interface on port 2, vlan404, and I have the new WLAN using that interface. The WLAN security is using WPA2, and authenticates via our ActiveDirector services, as well as handing out DHCP from our Windows DHCP server.
The client wireless PC is able to connect to the WAP, but unable to connect to anything else. It can only ping the WLC4404 interface2 address, and nothing else. It does receieve DHCP info (via WLC via Windows DHCP server), but cannot see DHCP server.From the WLC4404: I can telnet into the management IP address, and can ping PC's on the new WLAN, and anyplace else, except the vlan gateway ip address on the 6509.From the 6509: when telnetted in, I can ping everything except interface2 of WLC on vlan404 and the wireless PC using the new WLAN. I am able to ping the ip address of int for vlan404. The 6509 somewhat see's the WLC int2 & wireless PC. Show ARP | inc 404 from the 6509 shows the IP's of the VLAN int, WLC int2, and wireless PC. Show mac-add-tab | inc 404 shows the WLC and wireless PC on same 6509 port.From my work PC (via LAN) at a remote location: I can ping everything except Int2 on the WLC, and the wireless PC.
Cisco Wireless :: Accessing OEAP600 On WAN Interface?
Feb 5, 2013Can I get access on the WAN Ip from an oeap600?I can't connect trough [URL]
View 3 Replies View RelatedCisco Wireless :: AP-manager Interface On 2504?
Jan 8, 2013I'm getting familiar with an existing, working wireless installation that uses a 2504 controller (recently upgraded to 7.3.101.0).
From the documentation, it looks like there should be a "AP-manager" interface by default (static). There is not one.
Configuring the Management Interface (GUI) #
Step 1 Choose Controller > Interfaces to open the Interfaces page.
###
Figure 3-3 Interfaces Page
#
According to that document, there are 4 Static interfaces. On the one I'm working on, there are only two: "management" and "virtual." (There are also a couple of "Dynamic" interfaces that have been set up.)From reading the documentation, it sounds like there should be an AP-manager interface, and that this would have been there by default.
It also sounds like an AP-manager interface is needed:Information About the AP-Manager Interface ## A controller has one or more AP-manager interfaces, which are used for all Layer 3 communications between the controller and lightweight access points after the access points have joined the controller. The AP-manager IP address is used as the tunnel source for CAPWAP packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
Question 1: If I do not have an AP-Manager interface, are the APs connecting at L2? Is there some way to tell on these controllers whether APs are connecting at L2 or at L3 using udp?
Question 2: Is it not the case that one AP-manager interface should be there by default? (I see in the docs that more than one can be created, but in that case I expect that the additional interface(s) would show in the list as "Dynamic" and not "Static.")
A bit of background: The customer network is largely one flat network now, and I'm planning on subnetting it, and routing from the closets up. I want to make sure what may need to be changed in this wireless setup before proceeding. (The main wireless users are also getting IP addresses on the same flat network, at this point. That obviously will change so that they are on their own subnet.)
Cisco Wireless :: WLC2504 Can't Create Interface On WLC Of Static IP
May 18, 2013I need urgent support on creating SSID as layer 2.We have cisco WLC2504 and 1602i access point. In our network we have in gate for guest.I want to create one ssid and bind with vlan only. We can not creat interface on WLC b/c of static IP.
View 3 Replies View RelatedCisco Wireless :: WLC 5508 Interface Addressing - Limitations?
Aug 26, 2012Is there any limitations of network size for an interface in a WLC 5508? Any recomendations of netmask size? Maximum /24, maximun /21?
View 5 Replies View RelatedCisco Wireless :: Dot11Radio0 Interface In Reset / Down Status?
Aug 25, 2011We have two autonomous access point 1142 series running 12.4(21a)JA1 and randomly the Dot11Radio0 interface goes into reset/down state. At first I thought it was something related to power consumption issue on the switch, but looking at the remaining (w) I have plenty.
View 8 Replies View RelatedCisco Wireless :: WLC 5508 Cannot Create AP-manager Interface
Aug 9, 2012Yesterday I was in one of our client premises configuring a WLC 5508 with software 7.2, went through the initial configuration wizard with no problem whatsoever, my issue began when trying to configure a ap-manager interface.In many WLC configuration guides cisco states that for 5508 it is not required to configure an ap-manager interface because the management will suffice, but then they put a side note recommending it's configuration for best practices and better performance. OK so I saw that in an earlier version document and now they do not make the recommendation but the still use the word required and for me that's still is not a limitation. I can't create the ap manager interface because when I put the VLAN ID it says the it is being used by another interface.
View 5 Replies View RelatedCisco Wireless :: WISM V7.0 Interface Grouping With Different Subnets?
Sep 19, 2012WISM v7.0 VLAN Select. If the VLANs subnet to be configured under interface group MUST be having the same subnet.
Eg. VLAN1 - mask 255.255.255.248
VLAN2 - mask 255.255.255.120
Would these two VLANs be able to work together in interface grouping?
Cisco Wireless :: WLC 5508 Management Interface Connection
Aug 1, 2010I'm setting up a new 5508. I've used the config from a 4402, have successfully connected to the Service port to manage the device, but for some reason cannot connect to the Management interface. In this case, port 1.
The service port is connected to a Catalyst switch and grabbed an ip address (10.2.x.x subnet) no problem. I can access the 5508 via https using the SP. However, port 1 is connected to the same Catalyst switch, but on a different vlan (subnet 10.20.x.x). Both ends show that the interfaces are up, I can ping the interface from any other host on the network, but when I try to manage the device via https I cannot connect. We are using WCS and I cannot add the device from the WCS. About all I can do is ping that interface.
Cisco Wireless :: 3502i - Dot11 Interface Shutdown
Dec 15, 2012My 3502i suddently shutdown it's Radio interface and when I connect to it, I cans ee that the interface is shutdown. So tryign to enable it but the "configure terminal" command is not available. Is there any hidden command to go the priveledge mode?
______________
interface Dot11Radio0
no ip route-cache
shutdown
antenna gain 0
beamform ofdm
mbssid(code)
Cisco Wireless :: Additional AP-Manager Interface On WLC 5508
Aug 25, 2011at the moment we are using as default the manager interface as ap-manager interface.
Now I have to change the IP. I would like to change that very smooth with all our locations. My question, is it possible to add a ap-manager interface with a new vlan and IP Range, so that I can move the AP's to the second interface as as soon as it is planed with the location. Sometimes in special cases we have hard coded the WLC IP oder we just need to change the DHCP option but this needs to be planed and I see problem to do that in a hard cut.
Cisco Wireless :: Can't Configure Aironet 1142N With Web Interface
Jan 17, 2013I have a Cisco 1142N configured in autonomous mode.I'm running on:Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 15.2(2)JA, RELEASE SO FTWARE (fc1)
I can loggon to the web interface but it won't show me th expected status information.
Cisco Wireless :: AIR-LAP1141N-E-K9 Radio Interface Reset
Sep 2, 2012I am facing a problem with my access point AIR-LAP1141N-E-K9, which was converted from LWAPP to autonomous, radio Interface Dot11Radio0 is going to reset down state very frequently.AP is connected to WS-C3560G-24PS (POE) switch. [code]
View 4 Replies View RelatedCisco Wireless :: WLC 5508 7.3 Management Interface Access To GUI?
Jan 16, 2013After I've upgraded software to the v7.3 and applied AP-SSO it made imposible to access the controller's gui via Service-port. So we tried to access it by management-port, but there is some problem too. It is not working from another subnets. But default gateway on management vlan is set correctly and I even tried to turn of all acl's on switch. WLC is only accessible from the same network. But at the same time wlc is replying on ping fine.All other protocols cannot connect to the controller.
View 3 Replies View RelatedCisco Wireless :: 3502 - Set NAT Address For Management Interface
Oct 19, 2011I have got a 3502 setup and functioning in Office Extend mode. I have found one issue though. I have to set the checkbox on the my Management Interface to Enable NAT Address and put the external address in the box. Once this occurs no internal APs can join the controller.
Need setting this up with a single controller behind a router and not having to set the NAT Address for the Management interface? Should I setup a second interface on the controller to be for external management?