Release Interface Loopback Pseudo - Interface 1 / System Do Not Find File
Oct 31, 2011
I share a modem and router with my building, and connect to the internet using an ethernet cable which plus right into the wall in my apartment. When I hover over the network/internet icon it tells me that I have a local connection only and can't get online. No changes were made to my computer between it working and not working - I have not installed any new software and the modem+router have not been changed.
When I try ipconfig/release is says it can't perform the operation while the media is disconnected. It also tells me that "an error occurred while releasing interface Loopback Pseudo-Interface 1: The system cannot find the fie specified".
[code]...
View 1 Replies
ADVERTISEMENT
Oct 24, 2011
I was first playing dungeons and dragons when suddenly it began to shut down. This driver was the name was listed, and it had a yellow exclamation mark. I clicked on the update driver and selected the automatically choose, which I read may have been the wrong choice from manually. Nothing happened, so then uninstall it altogether, but finding the diver to reinstall has been challenging. OS windows vista.
View 2 Replies
View Related
May 9, 2012
i have a 1841 cisco router and i recently purchased a 1 port HWIC wan interface card. My problem is that I cannot see the interface in my config file. Is there something i am missing?
View 8 Replies
View Related
Apr 16, 2013
I have a router asr1002 and I need that my loopback interface will be accessible from internet ISP adderss space I have
46.xx.x.64 255.255.255.192
interface TenGigabitEthernet0/2/0.301
description -=ISP=-
encapsulation dot1Q 301
ip address 46.xx.x.66 255.255.255.248
[code]...
packets transmitted 9received 0packet loss 100 %time 8063 ms
View 1 Replies
View Related
Mar 29, 2011
how do I telnet to remote devices from nexus 7000 with source interface as loopback 1?
View 1 Replies
View Related
Sep 26, 2012
I have an Ethernet Loopback Plug (4 Pairs) made and trying to test the Gigabit Interface on a 3845 Router with a fail result. The interface will show up/up only if I set the interface to 100M/Full Duplex when I plug-in the Ethernet Loopback Plug (4 Pairs). I don't see this Gigabit Interface @ 3845 router has any option to set it to internal or external loopback.
View 2 Replies
View Related
Feb 3, 2013
Region : France
Model : TD-W8151N
Hardware Version : V3
Firmware Version : latest
ISP : OrangeF
Received today my modem, configured it with some effort but it works... Now i'm trying to save ma config file (rom-0) using web interface, and when clicking on Maintenance > Firmware, i'm always getting:bug.jpg Seems to be a big bug
View 4 Replies
View Related
Jul 21, 2011
We have a 3845 router, IPBaseM, ver 12.4(15) that seems to accept an SFP (GLC-LH-SM). It does not show up on a show run, or Sh Ip int brief. If I type show tech-support | include sfp, it returns "sfp_transciever_cod 0x2 (1000BaseLX)".How do I go about configuring it for Ethernet Private Line access?
View 1 Replies
View Related
May 1, 2012
I have a Cisco ASA 5505 and I have my internal and external interfaces configured but I currently cannot ping from the inside to an IP Address on the outside. I had this setup and working and I have another set of equirement that I am replacing that is working with my service provider so I know it is a configuration issue. When I ping 4.2.2.2 for example I get:
Destination host unreachable
Do I need to add a static route from my inside interface to my outside interfaces?
: Saved
:
ASA Version 8.2(5)
!
hostname pxasa
[Code].....
View 2 Replies
View Related
Apr 9, 2011
Is it possible to set up a WAN interface on a FastEthernet interface of a Cisco 877 Adsl Router ?Due to my ISP, i've to use an external VDSL modem and must connect it to my cisco 877 router (and leave it's adsl interface unused).But i don't know how to set up a wan port, other than the adsl interface itself (dialer0), on my cisco.
View 7 Replies
View Related
May 28, 2013
We are having Cisco ASA 5540 having Cisco Adaptive Security Appliance Software Version 8.0(5)23 at certain time of moment daily wer are facing latency and packetdrop wherin when I checked for ASA Interface which gives me " Input Errors" on outside interface ,so can any one tell me what are the causes to get input errors on cisco asa outisde interface.
View 2 Replies
View Related
Feb 13, 2012
I have a 1t3/e3 card in a new 2951. When I statred the router, I found no interface corresponding to this module when do "show ip interface brief"
View 3 Replies
View Related
Oct 9, 2011
I have Pix 501 firewall and I'm just configuring the device for "Email Server" to allowing POP/SMTP.
Inside Interface Address: 132.147.162.14/255.255.0.0
Outside Interface Address: ISP provided IP address
My question is can my traffic goes from inside interface to outside interface? (because the inside interface address not from 10.0/172./192.168 private address)Also I'm allowing internet from this email server (132.147.162.14) so what my access list to be configured? and what my subnet mask shoud be there?
Pix(config)#access-list outbound permit tcp 132.147.162.14 255.255.0.0 any eq 80
Pix(config)#access-list outbound permit udp 132.147.162.14 255.255.0.0 any eq 53
Pix(config)#access-group outbound in interface inside
View 7 Replies
View Related
Mar 18, 2013
I've got a ASA 5550 firewall interface failover issue. (File attached).
when I shut down the inside interface Gi 1/1 of the left firewall(Active firewall), It failed to failover. but when I shut down the Gi 1/12 of the Core 1 switch, The firewall failover very well.
I followed this guide but I was not able to failover. [URL]
how can I configure so that when the Gi 1/1 or Gi 1/0 interface goes down, it can failover ? Code...
View 6 Replies
View Related
Apr 22, 2012
Needing to bridge from my wic interface to an ethernet interface on a 2900 series router so that I can pass through the ip address given to the WIC, to my ASA so that I don't have to give my ASA a private range address. (Just like a service provider might do when bringing a T1 with managed router in to my prem)
View 1 Replies
View Related
Feb 7, 2012
Is there a way I can find out the amount of bandwidth i'm using on a particular interface on a 4507 cisco multi-layer switch? It is a gig port and I have it setup for monitoring (spanning) and I see packets being dropped in the "Total Output Drops" area. To me it looks like it must be exceeding the 1gig limit but I don't know a way to check to make sure. I also have the queueing strategy set to FIFO.
View 3 Replies
View Related
Oct 4, 2011
We have 3560 switch with following IOS. version 12.2(55)SE3 and image name is C3560-IPSERVICESK9-M. On one of the interface we need to know what are traffic is flowing.
Do we have "ip nbar or ip route-cache" support on this switch IOS? Is there any other way to find out which protocol traffic is flowing through that interface.
View 1 Replies
View Related
May 2, 2013
ASA have two context groups say admin and and x. Its interface gi0/2 has 6 subinterfaces from 1 to 6.3 subinterfaces ----0/2.1 to 3 are in admin and last 3 are in context x.when i went to system context it does not show where interface gi0/2 belongs to it only shows up up.how can i find which context group physical interface gi0/2 belongs?
View 4 Replies
View Related
May 19, 2013
How do I find interface to which an ifentry is associated with in Cisco IOS Catalyst switches ?
#sh snmp mib ifmib ifindex does not seem to work
As per information from the Cisco document , the command was introduced in IOS version 12.2(T) and higher [URL] The IOS version the switch I am working on is 12.0(5) The relavant info from #sh ver is as given
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 13-Feb-07 15:04 by antonino
Is there any way I can find that in an IOS prior to 12.2(T) ?
View 2 Replies
View Related
Apr 5, 2011
I have five 877 routers connected to ADSL circuits provided by Vodafone. Each has a VPN tunnel back to a PIX.
Occasionally one of the sites will lose it's connection to the PIX.
When we check the log, we find entries like these:-
Apr 5 01:31:54.085 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to downApr 5 01:33:19.344 UTC: %CRYPTO-
[Code].....
As you can see, the physical interface (ATM0) is not being reported as changing state to down, neither is the Dialer interface.
When the router is in this state we have to SSL to the public IP address of it and manually restart the ISAKMP SA.
When the router sees the ATM interface go down and subsequently come back up, the VPN connection to the PIX also recovers.
So - in a long winded way I think I'm asking....why does the Virtual interface go down and is there anything I can do to stop it happening?
View 3 Replies
View Related
Mar 3, 2013
what difference is between these two ports?
I have a router with ISDN/BRI interface and i am planning to buy router with E1/PRI interface. Will i be able to connect them?
View 2 Replies
View Related
Jan 4, 2012
After unable to connect to my wireless network, I did a restore - but got a message: System restore failed to replace the file (C:WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking98c An unspecified error occurred during System Restore (0x80070002)I've tried 3 restores to get the same message.Am at a loss to get the computer back on line.Running win7 (32Bit) with Norton 360.
View 9 Replies
View Related
Jan 16, 2011
I have been having a few problems with my IBM T42 Laptop for a while now. I was originally running Windows XP on this system and about 12 months ago I installed Ubuntu 9 on it to mess around a bit with the OS and have a basic, non-Microsoft laptop in the house that I could use for browing the web and IM, etc... The laptop needed a clean install anway as Windows XP was running like a dog. Originally it was dual boot but once I got happy with Ubuntu I did a clean install and everything worked reasonably well. I had a few issues with the wireless LAN adapter and compatibilty, but sorted it out following a few forums (firware updates, driver updates) and everything was great. I upgraded to the Ubuntu 10.04 OS and then started having some issues. Essentially my browser would freeze randomly. Again, I visted the forums and had no joy in sorting out the problem. I reverted the OS back to Ubuntu 9 and the problem persisted. So I gave up on it totally around 6 months ago.
Last week I fired up the laptop again and decided I would use the IBM restore utility and the disks I created a couple of years ago to put on a clean install of Windows XP and see how things went. So far I have done all the Windows XP updates (SP3, etc...), I have been to the Lenovo website and updated all drivers, firmware, BIOS, etc... every little problem I have had has been sorted with a software or firmware update which I have successfully implemented. All niggles have been sorted bar one.The only problem I have left now is very odd. Everything works fine and at reasonable speed considering the age and specs of my system. When I connect via cable to my router/modem all network and internet services work fine. I have had no issues. But when I connect via wireless, intermittently my system will completely freeze - no errors, no logs - nothing. No sounds, just frozen screen. Hard reboot is the only thing that I can do to get back online.Further investigating the issue - the freezing occurs when I click on a link to download something. I can browse anything - I have tried videos (youtube) and have no problems at all - but if I click to download a file (software upgrade pack, pdf document, Qucktime player) the system freezes up and ONLY when connected wirelessly via the inbuilt Cisco Wireless LAN adapter. [code]
View 1 Replies
View Related
Sep 2, 2011
How to share files btween XP & Win98 operating systems , 2 towers
View 1 Replies
View Related
Nov 29, 2012
Cisco VG224 (R527x) processor (revision 4.1) with 119808K/11264K bytes of memory. Processor board ID FGL150411MN, R527x CPU at 225MHz, Implementation 40, Rev 3.1, 1 On-Board Twenty-Four FXS Analog Voice Module V2.1, 2 FastEthernet interfaces, DRAM configuration is 64 bits wide with parity disabled. 63K bytes of non-volatile configuration memory. System fpga version is 250027, % Crashinfo may not be recovered at flash:crashinfo, % This file system device reports an error.
View 4 Replies
View Related
May 27, 2013
i recently bought a new Supervisor Engine 720 WS-SUP720-3B and 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF. Once i fired it all up i got this error %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 2, power not allowed: Unknown Card Type. the System image file is "bootdisk:s72033-ipservicesk9_wan-mz.122-18.SXE6a.bin".
I have a 6509 up and running the same mods and working fine BUT the System image file is sup-bootdisk:s72033-ipservicesk9-mz.122-18.SXF7.bin. Is the boot image what is causing my isses?
View 1 Replies
View Related
Jun 7, 2012
I have a router Cisco 2800, but always is in Rommon, the message show is:
device does not contain a valid file system
dir: cannot open device "bootflash:"
rommon 8 > dir usbflash0:
Checksum failed on c1840-usbfslib-m
Expected checksum: 91d6, calculated checksum: 4527
open: file "c1840-usbfslib-m" not found
open(): Open Error = -1
loadprog: error - on file open
cannot load the monitor library "bootflash:%c1840-usbfslib-m"
from device: usbflash0dir: cannot open device "usbflash0:"
View 5 Replies
View Related
Sep 14, 2012
I lost my password to connect to a wireless network. Where do I find my passwork on my computer?
View 1 Replies
View Related
Dec 28, 2011
I'm trying to find some 4 ports network cards to add to my system but can't seem to find one that works.
I have an abit IP35-E motherboard
3 PCI slots (32 bits 5v)
2 PCI-e x1 slots
The only NIC I found are PCI-E x4 and PCI-X. I have been reading and some website said that PCI-X card doesn't work with PCI slots and some said it works but just at a lower speed.Where and how are guys are adding Network cards into your system?
View 9 Replies
View Related
May 20, 2011
I have a question regarding enforcing a QoS on Pseudo wire packets coming from a T1/CEM interface on an MWR2941. I have the TDM pseudo wire working great testing in a lab with two T1 test sets. The problem is prioritizing the T1 traffic so that on small WAN connections the T1 traffic is not dropped because of other low priority IP traffic. Currently I have tried applying policy maps to both the input CEM and output gig Ethernet interfaces. However, I am having trouble matching anything on the CEM input. I don't know if it is even possible to match packets on a CEM interface but that is the only point I can think of to put those packets in a qos-group.
Attached is an example of the config.
class-map match-any cem Traffic match mp ls experimental topmost 3 match any!
policy-map INPUT-POLICY class cem Traffic set qos-group 5 set dscp ef!
!interface CEM0/1 no ip address cem 0 xconnect 10.10.10.1 301 pw-class MPLS_EXP3 ! service-policy input INPUT-POLICY!
[Code] .......
View 3 Replies
View Related
Jul 26, 2011
lost connection and can't find icon in system tray or anywhere else to search for wireless routers in range.
View 1 Replies
View Related
Aug 8, 2011
come to a bit of a block in the road on a network im building ,all is going well except i need to build a pseudowire to backup our primary L2 circuit, I labbed this with some 3745's but the kit we are using is the 1921, with the universal image how do i go about upgrading functionality to allow this [code]
View 4 Replies
View Related
Dec 11, 2011
Where can I find the GSD file for IE3000?
View 2 Replies
View Related
