Cover 200 Meters And Get Internet From Router?
Sep 19, 2011Way to cover 200 meters get internet from the router?
View 1 RepliesWay to cover 200 meters get internet from the router?
View 1 Replieswhy i cannot connect my internet in 50 meters away from router to computer
View 2 Replies View Relatedwhere i am from, the houses are made of conrete. so obviously my wi-fi degrades. i currently have 1 basic wireless g linksys router set up, in my bedroom as thats where the primarry devices are. there is a portion of the house where the signal is non existant and i want to set up a 2nd wireless router for that area to have signal. its a fairly large house with 4 bedrooms.here is a breakdown of the device priority:
The main room (my room, east end of house)
Gaming PC (gaming, downloading, netflix streaming) non wireless
Wife's Laptop (occasional streaming, general internet surfing)
PS3 (gaming and netflix streaming)
Ipad (streaming)
[code]....
The general purpose of all this is just have wireless across the whole house for mobility, my room is the priority as far as bandwidth usage and coverage.Also i will be purchasing an N router for my room and moving the G router to my moms.
When I set up the E4200, the LinkSys tech had me code the name aquapanda and aquapanda1 for the "guest"....now when I look at the computer right hand corner icon I can see the wireless networks available in my area and I see aquapanda as "secured" and aquapanda1 as "unsecured" does this mean somebody in my neighborhood and use aquapanda1? I entered a password for aquapanda which is what I am using. Aquapanda1, the quest "unsecured" network has a small yellow icon showing but I do not remember entering a password for this...does my password for aquapanda cover the aquapanda1 network?
View 2 Replies View Relatedi have lan network it contains
1.1 internet router 1 Mbps(connected to switch)
1. 24 port switch 10/100 Ethernet
3.23 desktop computers
4. cat 6e Ethernet cable
everything is working fine internet is accessed by all pcs now i have to add 3 more computers to this same lan network to share internet & file sharing. so how can i do the lan setup ? 3 pcs are about 80- 90 meter far in same room this my 2 solution which would work without effecting the speed of internet and best ?
solution 1.24 port 10/100 Ethernet switch connected to 2nd switch 10/ 100 ethernet and add 3 pc to 2 nd switch via 3 cat 6e Ethernet cable which is 80-90 meter far for 3 desktop pc
solution 2: connected 80 -90 meter long cat 6e Ethernet cable from switch 1 directly to 16 port 10/100 ethernet 2 nd switch and from 2nd switch i took 3 cat 6e ethernet cable to 3 pc which are 20 meter far
I have a new site needing PoE for their VoIP system as well as the usual LAN config.I haven't used Cisco PoE switches for a good couple of years now and was wondering what you think of the 2960-48PST-S?
I will probably need PoE up to around 50 Meters and will be using PoE on most of the 48 ports over CAT5e 100Mbps with 1Gbps upload is fine so these switches do seem to tick all the boxes but I’m not sure if there are better options?
Is there any way to boost the signal to cover a bigger area?
View 1 Replies View RelatedMy laptop connects and has excellent strength throughout my whole home but my internet slows down when i move only three meters away from my modem. I have been sent a new modem, changed wireless channels and troubleshooted with my network provider but still no luck.
View 8 Replies View RelatedI’m planning to use Cisco 4410N AP for my new office. I have 20 offices in 1st floor (20 * 15 FT floor size). I want to know is it possible to cover the entire floor using one 4410N AP?
View 3 Replies View RelatedIf I try to connect to my internet wirelessly and my laptop has more than 2 meters distance approximately from my router then for some reason it doesn't connect.The laptop can spot my network at that distance and i can connect without problems from any other device such as my mobile phone or my mother's laptop, so I'm pretty sure that I'm not out of reach.Occasionaly it connects but this appens very rarely (in fact it happened twice so far), disconnects shortly after (after about 5 min) and the internet speed during that time is rediculously slow
View 14 Replies View RelatedHow much load (DATA) cat-6 cable can handle over a length of 100 meters?
View 2 Replies View RelatedI have AP3500e serises and I need to cover distance up to 300m in directional point. I was trying to find any materials about distance which are covered by different types of antennas but I can't . I think I will prefer to use external antena , but can I get a converter from RP-TNC to N type connector.
View 6 Replies View RelatedWhat is the maximum distance or safe distance this antenna can cover. I am using Aironet2602E access point. Because i couldnt understand the radiation pattern. There is 5 circle in the Radiation pattern but i dont know how to convert this is distance. Its only showing the DB.
View 23 Replies View RelatedJust installed a new WAG120N for a customer.All works fine except when I go to her sleep out, not more than 6 meters away - no connectivity through wireless, so bad that it doesn't even see it - this is with two separate laptops.The walls are nothing special - wood outside, wool fiber insulation & gib board inside.Roof standard corrugated iron.
View 1 Replies View RelatedEverything in my network works as a charm. Every host in my vlans can access and ping the internet with no problems. But, my main router does not ping the internet (Pinging either ip "173.194.71.104" or domain "www.google.com" do not work). I don't know how is that possible since my hosts can ping the internet. Below is my main router confiurations
!
hostname Internet_Router
!
boot-start-marker
[Code].....
I thought that the best option to do that in my Cisco 861 router, IOS v. 15.0 is to used NVI (Nat Virtual Interface)[url]...
I tried the solution given in this page, but is does not work.
I give you the running-config for my router before and after the modifications proposed in this page
[code]....
We have a home use WRT160N router linked to a PC desktop and two wireless laptops, Yesterday bought a new I-Phone, but could not link to my network (entered the security key many times). I accidentally connected to computer fix it firm that linked to my PC and wanted a large sum to fix the problem which he said was due to large number of temp?? internet files and once removed he would change the IP address of the desktop computer? Is this diagnosis logical and can I do it on my own. The router is definetely working - both laptops access the internet and I was recently able to hook up a Samsung Blu-Ray player using the same security code I used for the I-Phone.
View 1 Replies View RelatedMy main Internet connection is a frontier modem /router It is on the main level of the house. In the basement I am trying to set up the cisco E3000 through an Ethernet cable.
View 4 Replies View RelatedRouter 1: I have a WRT120N wireless router connected to the Internet. It has IP 192.168.1.1 and DHCP is enabled with address range 192.168.1.100 up.
Router 2: I have a WRT310N router connected to the LAN via LAN port to ethernet jack in the wall (not WAN/Internet port). It has ip 192.168.1.2 and DHCP is DISABLED.
All the devices on my network can see each other. Devices connecter to router 1 can see devices connected to router 2.The problem is, devices connected to router 2 cannot get to the Internet. I verified clients connecting to router 2 are assigned the same DNS addresses and the same gateway 192.168.1.1 as the clients connected to router 1. But for some reason router 2 doesn't know how to router Internet traffic out through router 1?
I tried plugging the LAN cable into the Internet/WAN port on Router 2 but then devices on Router 2 can no longer see devices on Router 1. I've seen discussions of setting up router 2 on its own subnet: 192.168.2.1 instead of 192.168.1.2 but then supposedly devices on router 2 will still not be able to see devices on router 1.
I'm guessing router 2 can't access the Internet because it is default configured to send Internet traffic to the Internet port, no t the LAN port. how to configure it so all devices on both routers see each other and router 2 devices can get to the Internet.
How to connect two PCs and one DSL router to get on the internet?I am getting IP conflict error on the PC. I can only connect one PC at a time to get to internet.
View 1 Replies View RelatedI am trying to setup my E4200 to my new Cable Modem. I followed all of the procedures. I get Internet access when plugged directly to modem. I cloned the MAC Address and the Stus of the Router displays my current IP's (so I should have Internet). However, when I plug my computer into the Router I get no internet access.
View 3 Replies View RelatedI connected EA6500 internet port to actiontec router provided by Verizon fios. I don't have any other way to connect as FIOS connection is coax to actiontec modem. I must take a drop from actiontec to internet port on EA6500.
With that said, I can't get EA6500 to work, it keeps saying no internet. The only way I can get it to work is when I set it to bridge mode. This makes my EA6500 a dumb switch/access point. I didn't spend $200 for a switch. I need to use advanced features offered by this router but I can't until this problem is fixed. I made sure I am running latest version of firmware (1.1.28.146856).
I have reset my fios router as well as ea6500 to factory defaults multiple times.
I have a problem with the e4200 router and a mybook 1 TB connected to it. The media server works fine but after a while i loose contact with the router and the server this means that the Cisco connect doesn't work, the 192.168.1.1 doesn't work and I can't find the disk via \. I do have internet connection via wifi as im using it now....why I loose connection to the router? The lease time is 24h and it can happen more than once in a day.
View 4 Replies View RelatedI bought a Cisco-Linksys E3200 8 months ago and it worked well until last month. I usually power down the router after midnight & power up in the morning and evevry time it can connect to internet through DSL modem without problem until this Feb. Most of the time after powering up the router it just can't connect to internet anymore. I am sure the AT&T DSL modem is working. I have to reboot/reset the router & DSL modem several time to get router to connect to internet again. The order of resetting/rebooting DSL modem & E3200 router seems to make no difference. It just appears suddenly the router can connect to internet by chance. I changed router IP and it didn't work either. It's really annoying becuase I have to spend 10~40 minutes to resetting/rebooting DSL modem & router to get internet connection every day.
View 9 Replies View RelatedThe internet at my parents house has recently gone on the fritz..the wireless router is a N600 Wireless Dual Band Router WNDR3400..The computers of the house are able to connect to it..But it does not allow internet connections..The 3 computers are an HP Laptop running windows 7.a Dell Dimension E521 Running windows 7 & and an older HP Walmart special running XP.They can connect to outside systems and through a wired connection to the Modem from Cable vision. They replaced the wireless router and the problem continues.Internet is capable by plugging directly into the Cable vision router,unfortunately do not have the cables to try through the Netgear router to test that out..
View 3 Replies View RelatedI don't have Internet access, and this is for both a wireless connection and connecting to the router with ethernet.I do have Internet access when connecting directly to my modem via ethernet
View 3 Replies View RelatedI can connect to the internet with a cable straight from the modem but cant get online through wifi. Have a strong signal. I have tried all the usual suspect, rebooting, resetting etc 100 times.
View 9 Replies View Relatedmy pc can connect to router but not to internet. I can connect to the internet with my Iphone, my ps3 and my mac but not with my pc. A month ago the pc connected to the internet but not now.
View 4 Replies View RelatedFor the past month, I've had constant lag spikes for most of the day. When I connect the modem directly to my laptop it works perfect no lag at all. When I use a router it lags badly. I've even bought a new router to see if thats the issue[CODE]
View 1 Replies View RelatedMy connection to my router still says it's on but my Internet will not connect. It tells me page can not be loaded. Other programs that use Internet access are not working either. I tried resetting modem and router. I tried uninstalling and reinstalling my adapter in the device manager. I did install malwarebytes to remove some spyware.
View 19 Replies View RelatedI seemed to develop this problem after I downloaded a nvidia something or other update which was an optional update.i'm on another computer which can connect on all the ports it says no operation can be performed on local lan connection while it has its media disconnected.i did a system restore to a time before i dowloaded that nvidia update.
View 1 Replies View RelatedI just bought a d link extreme n wireless router and I tried to install it with a Mac book pro so we could not use the setup disc and when we tried to use the 192 168 0 1 in the URL and used the set up automatically and th Internet light on the router was not blinking and the internet was not working
View 1 Replies View RelatedI'm looking for a router that will let me hook up one PC to internet and have the rest of the network detached from the internet and all security issues, but still able to get to that one PC (and vice versa)....I don't want to do this with two network cards so am looking for a quick & easy hardware solution, if it exists....
View 12 Replies View Related