D-Link DCS-930L :: Access Cameras Through D-View Cam?
Feb 15, 2012
I can access my cameras through the Dlink web site (mydlink), but cannot access all of them through D-View Cam o n my desktop. I do a camera search and it only finds two of them and the third one it doesn't see. I tried to insert it manually and it still doesn't see it. It sees it fine in mydlink.
I've uninstalled the D-View Cam program and re-installed it, with the same results.
View 3 Replies
ADVERTISEMENT
Apr 12, 2013
I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies
View Related
Jul 22, 2011
I have installed two 930L cameras which work fine via mydlink. When I attempt to connect them to D-View Cam 3.11 they fail to connect or will not stay connected.I first tried connecting to the router with both cameras in the same room as the router. One will connect and stay connected but the other will connect and freeze or not connect at all. If I move th GOOD camera out of the room, it will not connect.Do I have a router issue? I am using Verizon FIOS with their supplied router (Actiontec, I think). My wireless laptop connects but signal strength is never 5 bars.
View 2 Replies
View Related
Feb 19, 2012
Just replaced my SMC Gateway with a Cisco Home Networking Modem, router doesn't see DCS 930 cameras. Working perfect before. I start the wizard, I plug in camera power, plug in ethernet cable for setup, light is green as requested, searches for camera, comes up "No Cameras found". Called ISP provider to reset modem, still no go. Tried a wireless setup using the "buttons", no go. Reset cameras..
View 9 Replies
View Related
Nov 17, 2010
I just purchased two DCS-930L cameras. They are both installed and running fine over wireless. I can view them via a web browser, however, I cannot get D-ViewCam to work. I installed the latest version (3.1.1). As soon as I launch the Main Console it crashes and I get the "Missing or Corrupted Files error code 268435457". I saw the other post in terms of change the display settings on my PC to 1280X768, however, that does not work. I also have User Account Control (UAC) turned off.
View 7 Replies
View Related
Aug 21, 2012
I am using a Mac and would like to view the live feed full screen. Is this possible?
View 3 Replies
View Related
May 3, 2011
Given that D-View Cam stinks (will only run full-screen), is there a way to view the DCS-930L using VLC?
View 14 Replies
View Related
Feb 15, 2013
If i run the software CD and activate the cam by "setup your cloud camera" it works and i can see the camera but i can only run it per local router command 192.168.... and there i only have the 320x240 solution. Important info: I only want to run the camera in my local network, i wont use the mydlink option,But if i install the D-ViewCam software the screen remains black and the program wont find my camera. I have already had a phone call with the d-link software
View 1 Replies
View Related
Mar 15, 2013
Is there a way to view live video without using the Mydlink app on an iPad?
View 3 Replies
View Related
Aug 7, 2011
Setup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.
I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?
View 2 Replies
View Related
Jan 24, 2012
way for one to view a camera stream without a username and pass? We are upgrading from older dlink cameras, I don't have the model handy. Previously we could just use the applet and it would display, I copied the applet from the new one but it requires a login to view.
View 1 Replies
View Related
Aug 7, 2011
Setup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.
I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).
What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?
View 7 Replies
View Related
Oct 28, 2011
i have a public ip and private still my cameras are not working i can't view them on the web.
View 1 Replies
View Related
Mar 13, 2012
Basically just need to get a static IP so i can remotly view my DVR cameras.
View 4 Replies
View Related
May 7, 2011
I setup one location (business retail shopping center) in maryland (using swann dvr/cameras- will switch to qsee) with no internet available.I setup another location (business auto shop) in virginia (using qsee dvr/cameras) with internet through verizon fios.I have internet through cox at home in virginia which I can view cameras remotely only to one location in virginia.
View 2 Replies
View Related
Dec 6, 2012
I have a DVR machine that I've been trying to carry out port forwarding to view cameras from outside the network. It lies on 192.168.1.31. The confusing thing is the ports. The configuration on the DVR lists a device port: 8000 and a http port: 80. I am torn between which port to forward.
View 1 Replies
View Related
Apr 23, 2012
I need viewing a DVR camera system remotely through a Motorola Netopia 3347 router. I was able to view the system properly for a year with the old ATT modem and a separate router, but recently the modem crashed and ATT replaced it with this Netopia that I can't for the life of me, understand.I can view locally but not remotely from the internet. I need establishing the Pinholes properly. I'm trying to get it working for port 85 for the DVR system. But I'm confused on the Internal vs. External port #'s it asks for in the Pinhole screen. No combination I enter seems to work. I even tried just using port 80 to get it working, but there was a conflict creating a pinhole for 80 since its already mapped to HTTP.
View 5 Replies
View Related
Jul 12, 2012
I recently installed a First Alert Security System and assigned IP address to the DVR but within the DHCP (After reading many threads, I will asssign, ping and create a static IP outside of the DHCP, maybe this will resolve the issue). I am able to view the cameras on my iPhone and HP Laptop but only internally on my network. I am trying to port forward my DVR IP address to be able to view the cameras on a public website. Although I am going to chcek and see if assigning an IP to my DVR outside of the DHCP and hopefully this will be it, I am afraid that my CradelPoint CRT 500 Modem will not support it. I read on one thread that this is a common issue after you have exhausted all the options. How can I be sure that my modem supports that my router port forwards? I want to avoid configuring to run in bridged or pass-through mode.
View 3 Replies
View Related
Jan 19, 2012
I purchased some cameras for my building. I have them set up ok on port 85 but I can't view them remotely until I set up the router to forward the port. I have a charter modem and the E2500 router.
View 1 Replies
View Related
Mar 29, 2011
I'm using a Verizon DSL router, Mac D-Link Camera Setup Utility (BETA), and Mac OS X 10.6.7. Configuration of camera is as recommended in manual with CAT-5 cable. Green light blinks irregularly in a communicating-with-router manner. The setup utility won't recognize the camera
View 1 Replies
View Related
Jul 5, 2011
I bought and hooked up my DCS-930L camera last week. Have since traveled overseas and go to Mydlink website, log-in and then it tries to install a java applet that never does install. It shows the security box where it asks me to run and then it shows another security box with a message: java.io.FileNotFoundException:C:usersmynameAppDataLocalLowSunJavaDeploymentsecurity rusted.certs(Access is denied)
I click ok and the java applet never loads. It just keeps saying Installing Java Applet.
View 7 Replies
View Related
Sep 13, 2011
I think I did everything per the manual, but I cannot access my camera over the internet thru [URL] website. It says that I have to check if I have enough bandwidth, or checked if my camera is not blocked by my router But I have a Dlink DIR 655 router where I have configured the Virtual server (port 80) as it is explain in the manual I also have a DHCP reservation that works fine (I can access the camera within my network) What should I do more now to finally access my camera from internet (this is for me the interest of havinf a network camera!)
View 14 Replies
View Related
Oct 9, 2011
during the first set up I have set a password as it was requested during the installation routine. After the installation, I added the camera's IP to my browser (tried IE9 and FF). In both cases I was asked to enter the user name and the PW, but I can't access the 930. I'm using the very same PW as I had set up during the routine, but none of the browsers accepts the PW.
View 6 Replies
View Related
Nov 26, 2011
With basic "Wizard" setup I got DHCP and port 80 for the camera. It was working just fine with MyDLink and locally with DLink-ViewCam software and some local test web pages. However, we have a wireless printer on that router which also uses port 80, so when it was installed we set up a "port forward" for port 80 traffic to it for administration from other subnets. How MyDLink website is able to tunnel through our hardware firewall and the wireless routers firewall to communicate with the camera is not clear to me (perhaps someone can send me a link to an explanation??), but it works...Thus, to allow access to the camera from other subents, I wanted to change the camera's port from 80 to another, say 8181 and set up the appropriate "port forwarding for TCP and UDP. All of the steps below were from a PC within the camera's subnet/router so port forwarding is not an issue
View 5 Replies
View Related
Mar 24, 2011
I'm trying to programatically access the MJPG stream from my DCS-930L camera from outside of the DLINK software. Any correct URL for MJPG? Is there any way to view the website contents from this camera so I can hunt this down, or any technical documentation on it?
View 1 Replies
View Related
Jan 23, 2012
I have 2 places in a distance of <300m, so I'll call these two places Zone A, and Zone B.I have each TL-WA5210G APs in Zone A and Zone B. Also, 2 IP Cameras for each Zone A-B. In Zone A, I have the two IP cameras and my office, (so I could see what happens in my "A" zone when the signal come to a LCD located at my office), and also, I want to see what happens in my B Zone. So, I was thinking to connect the IP Cameras to my AP in Zone B, in the way that this AP sends the signal to the AP at my "A" Zone, including the cameras in this A Zone.So, I don't know how the APs need to be configured, I mean, in which operation mode. I've read that 1 must be in AP Client Router and the other only in AP.
View 2 Replies
View Related
Jan 16, 2013
i have multiple DCS-930 and DCS-932 at my home. I also have other IP cameras. Is there a way to add IP cameras to the mydlink app on Android, iPad, and web?
View 1 Replies
View Related
Jun 20, 2012
I am doing a project with 6 DCS3411, 4DCS 7110 and 1DCS 7410. My question is which DNR /NVR will be able to support all the cameras and how. because most of the say they can support up to nine.
View 1 Replies
View Related
Mar 23, 2012
On one of my cameras time keeps resetting as if power was turned off then on again. It happens 2-3 times a day. I think there is no way to resolve it other than replace the camera.
View 6 Replies
View Related
Mar 25, 2011
Recently I hired some people to set up a security camera network in my office. They gave me an ip to connect to. I've been trying to connect to it through internet explorer, but when i type it and click go, it says:"Some content or files on this webpage require a program that you don't have installed"
View 3 Replies
View Related
Sep 8, 2012
I am trying to be able to access my IP cameras over the internet and am having trouble. I have been trying to follow the manufacturers directions but the Modem I have, is different than what they discuss. I have a Netgear Model 7550. When I choose to port forward, there is no place to put the IP address.I can see the cameras when I'm on my network, but once I get off that network, i cannot access them any longer.
View 2 Replies
View Related
Aug 13, 2012
can't forward port 80 and 9000 from my Qsee Dvr on my linksys router. Model Bfsr41 firmware ver 1.05.03. I want to be able to access my security cameras remotely.
View 1 Replies
View Related
Jan 25, 2012
I have two locations separated by less than 300 meters. In each zone I have an Access Point and in only one zone (let's call it Zone B), I have two IP Cameras. The idea is to connect these two cameras to my AP located at Zone B, and then, send this signal to my other AP to get this cameras in a LCD. First of all, I want to know in which mode should the APs be connected, I mean, in which "Operation Mode". I have three options:
-AP Client Router
-AP Router
-AP
And if I choose AP mode:
-AP:
+ Access Point
+ Client
+ WDS Bridge
+ Repeater
PD: The APs Model: TL-WA5210G
View 14 Replies
View Related