D-Link DCS-930L :: Router Doesn't See Cameras Anymore

Feb 19, 2012

Just replaced my SMC Gateway with a Cisco Home Networking Modem, router doesn't see DCS 930 cameras.  Working perfect before.  I start the wizard, I plug in camera power, plug in ethernet cable for setup, light is green as requested, searches for camera,  comes up "No Cameras found".  Called ISP provider to reset modem, still no go.  Tried a wireless setup using the "buttons", no go. Reset cameras..

View 9 Replies


ADVERTISEMENT

D-Link DCS-930L :: Access Cameras Through D-View Cam?

Feb 15, 2012

I can access my cameras through the Dlink web site (mydlink), but cannot access all of them through D-View Cam o n my desktop. I do a camera search and it only finds two of them and the third one it doesn't see. I tried to insert it manually and it still doesn't see it. It sees it fine in mydlink.

I've uninstalled the D-View Cam program and re-installed it, with the same results.

View 3 Replies View Related

D-Link D-ViewCam :: Unable To Connect Two 930L Cameras?

Jul 22, 2011

I have installed two 930L cameras which work fine via mydlink. When I attempt to connect them to D-View Cam 3.11 they fail to connect or will not stay connected.I first tried connecting to the router with both cameras in the same room as the router. One will connect and stay connected but the other will connect and freeze or not connect at all. If I move th GOOD camera out of the room, it will not connect.Do I have a router issue? I am using Verizon FIOS with their supplied router (Actiontec, I think). My wireless laptop connects but signal strength is never 5 bars.

View 2 Replies View Related

D-Link D-ViewCam :: DCS-930L Cameras Missing Or Corrupted Files

Nov 17, 2010

I just purchased two DCS-930L cameras.  They are both installed and running fine over wireless.  I can view them via a web browser, however, I cannot get D-ViewCam to work.  I installed the latest version (3.1.1).  As soon as I launch the Main Console it crashes and I get the "Missing or Corrupted Files error code 268435457".  I saw the other post in terms of change the display settings on my PC to 1280X768, however, that does not work.  I also have User Account Control (UAC) turned off. 

View 7 Replies View Related

D-Link DCS-930L :: Camera Not Detected Anymore On Network

Nov 5, 2012

LED is solid red (front) and solid blue (rear). try resetting thru the pinhole button but problem still the same. Camera not detected anymore on my network. I've try switching on and off, problem still there.

View 4 Replies View Related

D-Link D-ViewCam :: 3.2 Doesn't Work With More Than Two Cameras Monitored (942-L / 5222-L)

Jul 10, 2012

I have (2) 942-L, and (1) 5222-L on one network.  port forwarding set on router; (942) 192.168.1.3:1024, (942) 192.168.1.4:1025, and (5222) 192.168.1.8:80.  no matter if all 3 are connected to dViewCam, only two will work at a time.  Disconnect any third, and they work fine.  reconnect 3rd, and one disconnects intermittently.  On a side note, if I run a different program on another computer (iMac); i.e. IP Camera Viewer, they all work fine.  I know, I know, but I like DViewCam, because it's the only thing running the PC computer. 

View 3 Replies View Related

D-Link DIR-655 :: Website Filter Doesn't Work Anymore

Jan 12, 2012

I had the website filter ON and it was working very well to block a few websites on a schedule. And after a few month, it doesn't work any more. While it is possible that I scewed up the setting , I have tried so many settings.

So:DIR655 fw 1.32NA,hw A3,"Enable access control" is on with the desktop MAC address (used copy this MAC)(I have also tried my laptop MAC),web site filter is set to "deny",the router time is set using NTP dlink server,

View 3 Replies View Related

D-Link DIR-655 :: Virtual Server Settings Doesn't Work Anymore

May 17, 2011

I have several ports opened on my DIR-655 A3, pointing to specific ports on a NAS server i have on my network.

I've already try this:

- Reboot the router

- Erase all Virtual Server Settings and try open only one port

- Re-flash the router with latest European firmware - 1.34b05EU

View 11 Replies View Related

D-Link DCS-930L :: Doesn't Work With WPA Encryption

Dec 25, 2011

I can't get my brand new DCS-930L cam to connect to my network by using the WPA / WPA2 encryption. Works ok wired, with WEP or with no encryption enabled. Red led is on the front. I've tested sw version 1.02, 1.03 and the latest 1.04b03. Same result: WPA doesn't work. I have a Thomson TG789 Gateway/Router as provided by my ISP. All other units in the network works perfectly fine on WPA i.e. PC, Mac, printers, mobile phones etc etc.

View 1 Replies View Related

D-Link DCS-930L :: Motion Detection With Email Doesn't Work

Dec 4, 2011

I recently set up two cameras. I had set up one for motion detection and email to a gmail account. It seemed to work fine, but then for some reason the motion detection tab didn't show the room like it did before. It doesn't show any picture or anything like it did before, so I couldn't choose the squares to choose the detection area. This is through mydlink account->camera info->advanced settings, and logging in to the camera remotely.So I switched to the other camera, and got it working as of last week. But now, the motion detection doesn't work anymore? It appears to be related to the username/password for the email account. I can no longer send test emails, it says invalid username/password, though the exact same values worked last week, and I didn't change anything. I tried resetting it, then setting it again, but no luck.

View 5 Replies View Related

Linksys WRT54G - Router Doesn't Work Anymore

Jul 18, 2011

Comcast sent out a new modem a few days ago. The reason for this was our internet had gone out for a while, they came in and said our modem was fried. I have internet access by directly wiring from the modem to my computer.My router doesn't work anymore. I have a local network, but no internet access. I'm using a Linksys WRT54G, and I don't really know what to do.As far as I remember, setting everything to defaults and factory settings was how I set up my router in the first place and it just worked.

View 11 Replies View Related

Linksys Wireless Router :: E3200 - Network Doesn't Show Up Anymore

Oct 30, 2011

I have a linksys E3200.  Today I got disconnected and when it reconnected it stated that the network was changed to just network and not my usual network name.  I was having connection issues with the network disconnecting me and reconnecting me.  I uninstalled the cisco connect software.  I contacted support who told me to restart the router and modem, which I did.  After reset I tried to reinstall the software.  Cisco Connect likes to insist to do the installation wirelessly but my laptop can't find the router during installation to complete it.  My router is essentially a glorified wire connecting my computer to my modem now. 

View 2 Replies View Related

Linksys Cable / DSL :: WAG160n Router Doesn't Respond To Wireless At All Anymore

Sep 23, 2010

I recently bought a Linksys WAG160N v2 model to replace my old setup of a Linksys WRT54GL + ASUS AM604g (ADSL2+ Modem) i had.I've set it up to dial my ISP's PPPoE connection as i had on the previous setup exactly, And it seemed to work at first.But now i've randomly noticed the connection just dies - the router doesn't respond to wireless at all anymore, and connecting from a wired machine shows the PPPoE link died, while the log says something along the lines of "PPPoE connection terminated: transport endpoint not connected" followed by a big number with lots of zeros and :'s. Probably some kind of IPv6 error address? note that i am not using IPv6 myself nor does my ISP provide any such addresses.
 
I've already upgraded the firmware to latest and installed the newest WiFi drivers on the machine i was connecting from wirelessly (has an Intel Wifi Link AGN5300 module).

View 9 Replies View Related

D-Link DCS-930L :: Can't Setup New 930L With Mac OS X Beta Utility

Mar 29, 2011

I'm using a Verizon DSL router, Mac D-Link Camera Setup Utility (BETA), and Mac OS X 10.6.7.  Configuration of camera is as recommended in manual with CAT-5 cable.  Green light blinks irregularly in a communicating-with-router manner.  The setup utility won't recognize the camera

View 1 Replies View Related

Cisco WAN :: 871 Doesn't See Internet Anymore

Jun 5, 2011

We have a VPN setup for a customer between our shop and their shop 2.5 hours away. This is a Cisco 871.We had Verizon and the connection worked (still does) great! We had to switch providers as they sold to Frontier and were going to change our IPs anyways so why not switch to a faster provider instead.We switched to Charter. I have ZERO, NADA, ZILTCH knowledge of Cisco and I plan to keep it that was as they are way more complicated then they should be. Ill stay with my Sonicwall.....Anyways.... I took the config and did a find and replace for all the IP's, Gateways, DNS etc....I blasted that into the router and it took right off and connected up the VPN in a matter of 2 minutes. I was estatic as I knew I was going to sleep good that night not worrying about it..............Untill the next day at 11 am when I get a phone call from work saying the connection was down.
 
I go and realize that the router cant see the outside world anymore, therefor was obviously not going to see the peer IP address. I was dumbfounded!. To make a long story short I tried reconfiging therouter with the same file. I even redid the find and replace and resaved it to no avail. Still no go, no internet. All the proper IPs, Gateways and DNS numbers are where they should be. To test that its the config and/or something to far above me. I re configed the router with the old config and hooked it back up to verizon, it took right off and reestablished the VPN and was working.

View 6 Replies View Related

Port Forwarding Doesn't Work Anymore?

Jul 25, 2011

I have a W7 PC 64 bit system and I've been trying to port forward the port 25565 for my Minecraft server. However for some reason (even after port forwarding the right one) people still can't connect. When I check on Open Port Check Tool - Test Port Forwarding on Your Router It still says that the port 25565 is closed!I've even created an Inbound and Outbound rule in the Windows Firewall advanced settings. I use Avira Anti-vir fyi..

View 19 Replies View Related

Wireless :: Laptop Doesn't Recognize Wifi Password Anymore

Jun 16, 2012

I have a laptop that I want to sell, therefore I went to somebody to see my laptop and wanted to connect to his wifi. After repeatedly entering the pass for the wifi ,the wifi was still not connecting.

1. My laptop will see his wifi but after entering the pass will not connect
2. The pass is correct because I introduced the same pass on my mobile and I was able to connect to his wifi through my mobile
3 My laptop wifi is working fine because when I went home it connects automatically on my home wifi
4. I tried to open and close his router but I faced same problem.

View 2 Replies View Related

Linksys Wireless Adapters :: WUSB54GC Doesn't Turn On Anymore

Feb 13, 2011

I've just bought this wireless usb today and attempted 2-3 times to be able to connect with my router (D-Link's DIR-601) but it for some reason failed to do so, until the little usb didn't have its green light flashing anymore... and when i reconnected it to my Windows XP it rang its error sound... and I kept having this message from the Wireless Wizard that it's not connected appropriately or something...and that i have to run the setup wizard again.

View 1 Replies View Related

Cisco WAN :: 3845 Frame Relay Doesn't Work Anymore

Apr 21, 2009

I have a 3845 running 12.4.13a which I want to upgrade to 12.4.24.After upgrade one of the interface that is configured for frame relay doesn't work anymore.In fact is the "service-module t1 timeslots" commands that can not be executed and the router throws that error.I tested this behaviour on two 3845s and the result is the same.Is this a bug or is an workaround for it?

View 3 Replies View Related

D-Link DIR-600 :: Cannot Login To Router Anymore Even After Reset

Jan 9, 2013

I have been using d link routers for a very long time. However, recently I have a problem with one of my dlink router..

Basically I have a Wireless N 150 Home Router (DIR-600 B2). I managed to reset and login to the router at http://192.168.0.1. I tried to made some configuration (disabling DHCP, some stuff, basically I was trying to configure this router as Wireless Repeater to connect to another room downstairs).

So it didn't connect so I do a reset (hold a pen for 20+ seconds at the reset button) and now I cant login to the router at http://192.168.0.1..

View 4 Replies View Related

Can't Connect D-Link 4300 Router To Modem Anymore?

Jan 1, 2013

I can't connect with my D-Link router 4300 to the modem. It's like my router doesn't recognize the internet connection of my modem because there is no available connection at all, for every single PC in my home ! When I connect a cable to my PC, it works. I can't see the problem because I can't even connect to http://192.168.0.1/. I tried many variations but nothing. It all started because I changed the WPA security to WPA2. Then it restarted my router and nothing worked after. I tried several times to reset my router with the reset button, but nothingHere is the ipconfig[CODE]

View 1 Replies View Related

Cisco Switches :: SRW224G4 V1.1 After Power Brake Our Switch Doesn't Boot Anymore

Aug 15, 2012

We have small network with 15 Computers all connected to SRW224G4 . After a power brake our switch dosent "boot"  anymore. I see all leds working flashing etc but no network acces, no Serial acces. When i try connecting to serial port and "reset" device the screen is blank.

View 1 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3220 Suddenly Not Connecting To Internet Anymore

May 13, 2013

Region : Philippines
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP : Smart Bro

Today my router stops working. There is no internet on wifi even on lan. I thought my ISP is the problem but when I plugged in the wan cable to my laptop there's an internet. I tried to switch off the router and when I turned it on, there's an internet for about 15 seconds then after that there's no internet again. I also restore the router to its default setting but it doesn't solve the problem. This is the first time it happens to my router. I'm not using static ip address

View 1 Replies View Related

D-Link DCS-930L :: Can't Connect To Router

Apr 7, 2011

I just recently purchased the DCS-930L wireless camera, and I am trying to connect it to my Netgear router but it states that there's an error and can't connect.  My itouch and laptop connects fine with the router.

View 6 Replies View Related

D-Link DCS-930L :: Works Connected To Router Via Lan But Not Wireless?

Aug 11, 2011

Since the blackout beginning of this week from dlink I had to reset my camera totally to operate it again. works now again with iphone and with mydlink. But it only works as long it is connected via lan cable to my router. I accessed the set up (via ipaddress) and entered the router details to the setup but as soon I disconnect from lan it does not work anymore. What did I oversee.

MAC OS X
Airport extreme

View 1 Replies View Related

D-link Dcs-930l :: Router Not Allowing Anyone To Connect Via Wifi

Jul 23, 2011

My internet speeds are 45 Mbps DL and 1 Mbps UL and my various wireless connections (3 laptops in my household) were achieving speeds anywhere from 25-40 Mbps DL. My router started acting up and wasn't letting anyone connect via wifi so I did a factory reset and set it up the same way I did before (as best as I could), it started working fine again but now the speeds on all the devices that are connecting to at are capped at 18 Mbps. A simple speed test shows that no matter what they won't pass 18 Mbps, I am almost 100% certain this is the router and I was wondering what I might have done wrong or what is causing this.

View 5 Replies View Related

D-Link DCS-930L :: Router No Longer Sees Camera

Apr 11, 2011

I have a wireless network in my home. I reliably get solid connections on our various devices such as the Wii (netflix streaming), a net book, a laptop and Wi-Fi connections on android phones. When I first set up the 930L I thought it was defective because I couldn't get a connection. Until I did it in the same room as the router  okay, that worked. But I move 2 rooms over and I no longer connect.

Seriously, I can go a few rooms away and easily stream an HD movie via netflix to my net book. But if I set up the 930L at the exact same location it will not connect. If I move the camera within about 20 feet of the router with only maybe 1 wall between them, it will connect.

At this level of wireless power it is nearly worthless for me. Is my camera defective or are all of them this lower powered?I am running a dlink router, 300N, WPA security. Like I said, I can connect if I'm literally 10 feet away. But any significant distance or anything more than a single wall in between and the router no longer sees the camera. And all other wireless devices have strong, reliable connections all through my house.

View 3 Replies View Related

D-Link DCS-930L :: How To Setup Port Forwarding / Triggering On Router

Jul 21, 2012

I have the DCS-930L camera.  I need to know how to setup port forwarding/triggering on my router, which is a Cisco DDR2200 CL.  I understand that in order to use the camera, i need to do this.  how to set up NAT. 

View 1 Replies View Related

Linksys Wireless Router :: Connecting D-Link 930L Camera With E4200

Sep 17, 2012

I'm trying to connect the D-Link 930L Wireless N Camera to my E4200 router. When I have the camera connected via the Ethernet cable it works fine, as soon as I unplug the Ethernet cable it will not connect wirelessly. I tested the camera on a friends router E3000 and the camera connects fine and work flawlessly on his network wirelessly. Any settings in the router that need to changed or set differently?? All of my other devices work great. I have been through D-Links Tech support all things point back to my router.

View 6 Replies View Related

D-Link D-ViewCam :: DCS-930 / 932 - Add IP Cameras To Mydlink App On Android

Jan 16, 2013

i have multiple DCS-930 and DCS-932 at my home. I also have other IP cameras. Is there a way to add  IP cameras to the mydlink app on Android, iPad, and web?

View 1 Replies View Related

D-Link D-ViewCam :: DCS3411 Which DNR / NVR Will Be Able To Support All Cameras And How

Jun 20, 2012

I am doing a project with 6 DCS3411, 4DCS 7110 and 1DCS 7410. My question is which DNR /NVR will be able to support all the cameras and how. because most of the say they can support up to nine.

View 1 Replies View Related

D-Link DCS-942L :: Cameras Time Keeps Resetting?

Mar 23, 2012

On one of my cameras time keeps resetting as if power was turned off then on again. It happens 2-3 times a day. I think there is no way to resolve it other than replace the camera.

View 6 Replies View Related

D-Link DIR-615 :: Can't Access 192.168.0.1 Anymore?

Jun 18, 2012

I am using the DIR-615 (Revision D with firmware 4.13) as a secondary router (for using its WLAN) by having it connected to another DHCP router and having its DHCP and UPnP functions deactivated as instructed in the users manual.Everything is working as it should but ever since then, I cannot connect to the configuration site of the DIR-615 (192.168.0.1) anymore (request times out not matter if I connect via LAN or WLAN). So everytime I want to access it (for changing WLAN settings like changing channels as I frequently have to do) I have to reset the router to its default settings and install a 15 meter ethernet cable across the house.s the DIR-615 designed in this way? Is there no way I can access the DIR-615 configuration site after deactivating DHCP and UPnP?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved