Routers / Switches :: Can't View Cameras On The Web?

Oct 28, 2011

i have a public ip and private still my cameras are not working i can't view them on the web.

View 1 Replies


ADVERTISEMENT

D-Link D-ViewCam :: 3.3 / Setup 4 Cameras To View With Remote Live View?

Apr 12, 2013

I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80   ....   85. The screen has only the option for 1  video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras  at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?

View 5 Replies View Related

Routers / Switches :: Can't Access Security Cameras From The Net

Aug 13, 2012

can't forward port 80 and 9000 from my Qsee Dvr on my linksys router. Model Bfsr41 firmware ver 1.05.03. I want to be able to access my security cameras remotely.

View 1 Replies View Related

Routers / Switches :: How To Connect Surveillance Cameras To Internet Through DVR

Jan 10, 2012

I have installed 8 cameras that go to my 8 camera DVR. I have a 4 channel router that goes to my Comcast cable modem. I would like to view my cameras from anywhere that I can get on a computer. I have the DVD that came with my DVR and I don't know much about doing this kind of work. What do I have to do to view my cameras from any computer? My DVR is HS8308 8 channel Pentaplex H.264 DVR w/500GB HDD & DVD-RW What do I have to do to make this happen?

View 2 Replies View Related

Routers / Switches :: How To Hook Up 2 Ip Cameras Using 2 Routers

May 12, 2011

I would like to hook up 2 ip cameras to a server. I need to use 2 routers to do this. I already have the routers. router a is hooked up to the server. router b needs to connect wirelessly to router a. I can then hook up the ip cameras to router b. I just can seem to get it figured out.

View 9 Replies View Related

Get A Static IP So Can Remotely View DVR Cameras

Mar 13, 2012

Basically just need to get a static IP so i can remotly view my DVR cameras.

View 4 Replies View Related

Wireless :: How To View Cameras From Two State Locations

May 7, 2011

I setup one location (business retail shopping center) in maryland (using swann dvr/cameras- will switch to qsee) with no internet available.I setup another location (business auto shop) in virginia (using qsee dvr/cameras) with internet through verizon fios.I have internet through cox at home in virginia which I can view cameras remotely only to one location in virginia.

View 2 Replies View Related

D-Link DCS-930L :: Access Cameras Through D-View Cam?

Feb 15, 2012

I can access my cameras through the Dlink web site (mydlink), but cannot access all of them through D-View Cam o n my desktop. I do a camera search and it only finds two of them and the third one it doesn't see. I tried to insert it manually and it still doesn't see it. It sees it fine in mydlink.

I've uninstalled the D-View Cam program and re-installed it, with the same results.

View 3 Replies View Related

Cisco :: Configuring Port Forwarding To View DVR Cameras Outside?

Dec 6, 2012

I have a DVR machine that I've been trying to carry out port forwarding to view cameras from outside the network. It lies on 192.168.1.31. The confusing thing is the ports. The configuration on the DVR lists a device port: 8000 and a http port: 80. I am torn between which port to forward.

View 1 Replies View Related

Motorola Netopia 3347 - Can View Cameras Locally But Not Remotely

Apr 23, 2012

I need viewing a DVR camera system remotely through a Motorola Netopia 3347 router. I was able to view the system properly for a year with the old ATT modem and a separate router, but recently the modem crashed and ATT replaced it with this Netopia that I can't for the life of me, understand.I can view locally but not remotely from the internet. I need establishing the Pinholes properly. I'm trying to get it working for port 85 for the DVR system. But I'm confused on the Internal vs. External port #'s it asks for in the Pinhole screen. No combination I enter seems to work. I even tried just using port 80 to get it working, but there was a conflict creating a pinhole for 80 since its already mapped to HTTP.

View 5 Replies View Related

Port Forward DVR IP Address - View Cameras On Public Website

Jul 12, 2012

I recently installed a First Alert Security System and assigned IP address to the DVR but within the DHCP (After reading many threads, I will asssign, ping and create a static IP outside of the DHCP, maybe this will resolve the issue). I am able to view the cameras on my iPhone and HP Laptop but only internally on my network. I am trying to port forward my DVR IP address to be able to view the cameras on a public website. Although I am going to chcek and see if assigning an IP to my DVR outside of the DHCP and hopefully this will be it, I am afraid that my CradelPoint CRT 500 Modem will not support it. I read on one thread that this is a common issue after you have exhausted all the options. How can I be sure that my modem supports that my router port forwards? I want to avoid configuring to run in bridged or pass-through mode.

View 3 Replies View Related

Linksys Wireless Router :: Port Forwarding On E2500 - Cannot View Cameras Remotely?

Jan 19, 2012

I purchased some cameras for my building. I have them set up ok on port 85 but I can't view them remotely until I set up the router to forward the port. I have a charter modem and the E2500 router.

View 1 Replies View Related

Routers / Switches :: Port Forward On A SAGEMCOM SE567 Router To Be Able To View DVR?

Jun 12, 2011

How do I port forward on a SAGEMCOM SE567 router to be able to view my DVR from a remote location?

View 3 Replies View Related

Long Range Routers For Wildlife Cameras?

Sep 20, 2012

i have 13 acre and wanted to know about using a security camera set up wireless,solar power IR motion sensor type set up??

View 1 Replies View Related

Cisco Routers :: Rv220w Blocking Cameras On Wi-Fi?

Aug 1, 2012

I have 2 ssid signals setup at my workplace.
 
the 2nd one is for all guests and it's isolated from the lan+trusted(1st one) with a vlan feature.
 
the 1st one is for all trusted devices over wifi. the wifi channel is setup to allow mac addresses of the two asante security cameras. the cameras upload videos to an ftp on my server. the two will connect to the router at first, I can ping them or see them in 'my network'. give it a little time and they disappear. then I have to power off/on the router or the cameras to make them work for a few minutes. the process repeats.
 
the cameras make lots of connections to the ftp server. I'm suspecting they're flooding the router and it blocks them. occasionaly they will come back for a minute or two and disappear again as if blocked/unblocked.
 
I added their mac addresses in hopes of making them 'trusted' devices. I've tried them on both ssids. I checked and unchecked firewall/security checks and icsa settings. all other devices I tried, multiple phones and laptops work without problems on both ssids and they don't get blocked.

View 5 Replies View Related

Belkin Routers :: N600 Shuts Down And Restarts - Lose Connection To Cameras

Mar 12, 2013

I am running winsxp prodessional.I have a belkin N600 DB Wireless N+ Router and it is hooked up to a vmax 480 security syestem . this system allows me to see the cameras remotely on my ipad, i iphone amd laptop .

my problem is this the router shuts down and restarts( it must be programmed to do this ) and i lose the remote connection to the cameras. if i am home i can unplug the vmax and it will restart and find the router etc however when i am traveling i can not do this.

View 1 Replies View Related

Cisco Switches :: SG500-28 How To View Port G27 And G28 In GUI

Jan 31, 2013

how can i view the port G27 and G28 in GUI? As based on the GUI Adminstrator - > Port Management - > Port Setting i only can view from port G1 to G26. Or it will only appear when the port is active for stacking.

View 3 Replies View Related

Cisco Switches :: SRW224G4 - Cannot Access Web View Management Interface Through IP Address

Jul 12, 2012

I am the Systems Admin at LDM Media and am trying to get some support for one of the SRW224G4 managed switches we have in our rack. The issue is as follows:

Any endpoint connected to the switch is assigned an IP address in the range of 169.254.154.XXX regardless of the switches set IP range, the second issue is that I cannot access the web view management interface through the default IP address 192.168.1.254 (and I have tried to use the last IP in the range set by the router 169.254.154.254, to no avail)
 
How to regaining control of this supposedly smart switch?

View 3 Replies View Related

Cisco Switching/Routing :: View Capacity Throughput (backplane) Of Core Switches (6509)?

May 30, 2012

How i can view the capacity throughput (backplane) of core switches (6509)? How i know much is in use?

View 2 Replies View Related

Cisco Switches :: SGE2010 - How To View Table Showing Which MAC Address Is Plugged Into Which Port On Switch

Jul 31, 2011

I volunteer at a school who just purchased two 48 port SGE2010 managed switches.  I am not a big fan of the web gui and was hoping to see the standard Cisco command prompt instead of the menu-type interface.
 
Is there a way to view the MAC table showing which MAC address is plugged into which port on the switch?  I have been fighting with the menu and the gui for a while now and do not see this anywhere.

View 5 Replies View Related

Cannot View Devices On Separate Routers

Jan 27, 2012

I'm having a problem viewing devices on my home network. To better explain I created this diagram of my Home Network below.I have a Cisco VPN Router and connected to that I have a Netgear WRN 1000v2 Router & Linksys WRT54G2v1 Router. I used to have my home network connected to only one router and I was able to see and connected to other devices. Now my networks are separated, I think it has something to do with subnet masking and the IP addresses on the routers.

View 6 Replies View Related

Cisco Routers :: Cannot View LAN Resources?

Apr 23, 2012

I can connect via VPN with the QVPN but once I am connected to my network I cannot view the resources available to me by LAN. I am nowhere near aware as to why.

View 4 Replies View Related

Cisco Routers :: RV042 Cannot View Web Configuration

Oct 25, 2012

Yesterday  I have purchased a new rv042 router, If i enter url...I have access to a menu but nothing is shown when I follow the menu link.

View 6 Replies View Related

Belkin Routers :: F5D7230-4 How To View / Monitor Traffic

Jan 6, 2013

I have a Belkin G router F5D7230-4 (firmware version 8.01.07) and am trying to view stats on what is using our connection.We have a very low capacity, rural wireless broadband that our ISP tells us is maxed out all the time, even when we don't appear to be using any devices, so I'd like to view the traffic on our DHCP client list to see which device is using an excessive amount of bandwith and put a limit on its access.I don't see a statistics tab on the setup page, is there another place to look or does Belkin have an external program to do this?

View 1 Replies View Related

Cisco Routers :: RV082 Backup File View?

Sep 19, 2012

Is there a way to view the contents of the .exp file generated from exporting the configuration from RV082? I've got a couple of RV082 that have the same rules, but want to compare the configuration. 

View 2 Replies View Related

Cisco Routers :: RV082 V3 - View Configuration File?

Feb 27, 2013

Currently, the backup config is not human readable...any way to convert this?

View 1 Replies View Related

Routers / Switches :: Setup An Home Network With A Wireless Router And Use Multiple Switches?

Jan 29, 2011

I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.

View 3 Replies View Related

Routers / Switches :: Connect 2 Subnets With Two Switches And One Router Using SIM Software?

Apr 23, 2011

how to connect two subnets with two switches and one router using router sim software?

View 1 Replies View Related

Routers / Switches :: Daisy Chain 3 Switches And Not Have Ip Conflict?

Jan 31, 2011

Is it possible to daisy chain 3 switches and not have ip conflict? I am running a public access network for a library. For certain library software I need for all workstations to see each other. I have 25 workstations in total and two separate management consoles. I have all workstations on two switches but one of the management consoles is on the third switch because when joined with the others it has an ip conflict. I need this console for the digital sender that is connected as well as to act as a server for go print software.

View 3 Replies View Related

Routers / Switches :: How To Check Broadcast On Switches

Apr 26, 2011

how to check and trouble shot broadcast issues on network

View 1 Replies View Related

Routers / Switches :: Smurf Attacks On Belkin Wireless Routers Reply?

Jan 2, 2013

If your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.

View 6 Replies View Related

Routers / Switches :: Transfer WAN From Radio Receiver Through Chain Of Routers

May 24, 2012

For my work I am looking to create wireless capabilities to remote locations. To do this we are using a standard modem/router that is connected to an Engenius (802.11b/g) wireless outdoor radio connected to a dish antenna. We are able to go to locations (3+km) and then with a corresponding receiving antenna (using LoS), receive the Internet and connect both to computers at the transmitting point as well as to the WWW. The problem exists is that we want to employ a series of routers at the receiving end that would be able to carry the transmission to a different location (relatively close), due to the fact that some of the locations do not have line of sight to the antennas. We are using Encore routers, model # ENHWI-N3. When we connect the radio's Ethernet into the routers WAN reciever, we can connect to the Internet with a computer. The problem exists is we want to pass that connection over to a second router (R2). This connection is done when the routers are on access points set to a WDS function with R1 having R2's mac address and vice versa. Both routers are set to channel 1. Even when the routers are seperated by distances >50m a computer plugged into R2 can see a computer plugged into R1. Files can be transferred between the 2 computers wirelessly at speed around 3 mbps. However computer 2 on R2 can not connect to the WWW. This router features a spot that lights up if it has Internet access and R1's is lit up but R2's is not. How do we transfer the Internet and not just a LAN from R1 to R2 so it can be accessed further away from the point of the radio and antenna equipment. This setup has also been used where R2 is hardwired to R3. At R3 we change the channel to 11, and then connect through that with mac addresses wirelessly to 4th router. If comp is in R4 and far away it can still access and file share from comp at R1.*edit the ip address for the routers exist all on 192.168.1.xxx If the 3rd number is different between routers would this make a difference?

View 1 Replies View Related

Routers / Switches :: D-Link And Linksys Routers Plus Modem Connection

May 26, 2011

everything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved