I can't connect to the internet. I connect the cables but the router doesn't connect to the internet. I contacted to my ISP and they told me to put this settings but I don't know how to put these
Settings;
Type: Bridge
Encapsulation: LLC
VPI: 8
VCI: 35
QoS: UBR
Modulation: GDMT
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
some problems I was having with the wireless schedule forcing a router reset when the schedule was enabled. D-Link eventually conceded that the problm is a faulty router. However, to have the router replaced will take 2 - 3 weeks, meaning I have to buy another router if I don't want to be offline for that long. So I've decided to save up my money to buy a new modem, and I've found that by having wireless enabled at all times works around the problem.However, around the same time I started diagnosing that problem I was changing various settings. At the time I may not have mentioned I have 2 PS3's here. These stopped being able to connect to the internet at around that time, and the kids tell me they didn't tell me about it because they knew I was working on other router problems, but now they want their PS3's to work on line so they can play online games.I have tried automatic configuration and manual configuration. I have the MAC addresses in the router, have set them up in the Network filters, and have a DHCP reservations. I have used the routers DNS and also tried OpenDNS addresses.I keep getting error 80710102 (DNS error), and when I first turn on a PS3 807101FF. Both PS3s exhibit the same symptoms.
View 2 Replies View RelatedI have a simple(?) problem with my old router. I had this for 2 years but I never used it till today. So its brand new, just without warranty . Long story short, this router can't connect to internet. I tried resetting the router, newest firmware, stock firmware, chaining the Ethernet wire, etc. Nothing would work. The weird thing is, I can connect to the router both wirelessly and through the Ethernet port, but the router can't "communicate" with my Netgear cg3000d. I used the wizard to set it up.
View 4 Replies View RelatedI have a DIR-600. but now, it can not connect to internet.this is images when i connect mordem internet with Dir600. (mordem running good)And when i connect my laptop with Dir600?
View 1 Replies View RelatedI recently bought this router and I've set the router too many times and keeps doing the same thing. I've used WPA WEP and without security and the same the router still dosen't want to connect to the internet.
View 10 Replies View RelatedI'm having troubles getting my router to work today for some reason. I'm with teksavvy and I've had the router for 6 months now and this is the first time I'm having problems connecting to the internet.
Any laptops or desktops in the house that connect wirelessly cannot load anything related to the internet. If they are connected by an ethernet cable then only skype works for some odd reason. When I connect directly to the modem with my desktop it works perfectly. I tried unplugging the router for 5 minutes many times and that hasn't worked. I've tried power cycling through it as well, modem -> router -> computer and it does not work. I've also tried resetting the router as well, holding the reset button for 20 seconds. During the setup, the router could not detect an internet connection. After the setup it was the same situation as I started with. None of the computers can connect via router.
I have a D-link DIR-655 router which used to be able to connect to the internet fine through my modem. However, it wasn't connecting to the internet when I woke up this morning. I tried all the standard replacing the cables, powercycling the router, modem, and rebooting the PC. After trying all that, I used the reset button on the router and reconfigured manually by entering the IP into my browser and logging in that way, but still nothing. I can connect to the internet by plugging the modem directly into my PC, but connecting through the router or wirelessly doesn't work. I can connect to the network itself through the router, and wireless from my laptop, but it only has local access.
Here's the ipconfig going through the router:
Quote:
C:UsersSolon Family>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : SolonFamily-PC
[Code].....
I have had this router and everything was working, I have moved and after getting my internet activated I proceeded to set-up a network in my new place. The setup process went smooth but even though I can connect to my network, I cant connect to the internet. I know my internet works as a direct connection through the modem works. I updated the firmware, I tried doing a factory reset on the router, basically did all the basic stuff that one would do if they had router troubles.
View 14 Replies View RelatedI have a wireless laptop that works with the D-Link 524 but when I went to a D-Link 655 it wouldn't work and I have 3 computers on Ethernet and my Roku works but after 4 hours with D-Link Tech support it still can't connect to the Internet wireless but is ok with Ethernet. I have another laptop that works with this router on wirerless also. Could it be the labtops internal adapter.
View 4 Replies View RelatedI am having a problem with my tivo RS-TX20. I just got this for my daughters room on ebay. When going through the setup it wont connect to my home network. I am using a Microsoft MN-510 adapter. It finds the adapter in the initial setup but when it is finally trying to connect to the internet the connection fails and an error comes up saying the adapter could not be found. I am thinking it must have something to do with my DIR-655 router because I have the same exact tivo in another room and it works perfectly. I even took the tivo wireless adapter from that unit and tried and the same issue occured.
View 1 Replies View RelatedMy DIR-601 doesn't connect to the internet. I connected it through a cable to the modem, and the router to the computer. It worked for an hour, I could even set up the wireless and it worked. Since, I cannot connect the comupter to the Internet through the router, even using the cables connection. I connect to the router, but the router does not connect to the Internet. The modem works properly.
View 1 Replies View RelatedI bought a Dlink Dir-601, I was able to connect to the internet when we were with our last internet provider but after we switched companies it no longer connects to the internet. I've tried power cycling my system, updating the firmware, factory defaulting it, resetting it with the button on the back but no luck yet
View 4 Replies View RelatedI am facing a strange problem with my DIR 601 router. I am not able to access internet when I plug in the cable from my model to slot marked nternet' on the back of the model (which I guess is the right way). However, I can access the internet if I plug in the cable coming from modem into any of the 4 ports marked as 'LAN'.
View 2 Replies View RelatedWe have a DIR 655 router that I have set up with LAN and WiFi, all good.Today we received our mast and antenna from Vodacom (ISP) with the Public IP's to enter into the router. We connected the LAN cable into the Internet Port and did a manual Internet Static IP setup. But as soon as we click save it says: Type is not for 3G... How do I go about entering the public (static) IP's we received from the ISP in order to get the Internet operational?
View 8 Replies View RelatedI've gotten a dir-600 and have been trying to configure it so that it won't auto connect to the internet. Some people in my network prefers to manually connect to the internet from their pppoe dial-up on their PC. I've tried changing it to static or dynamic ip in the LAN config, but everyone connected to the router from LAN couldn't dial out as well. changing it to ap allowed everyone (including wireless) solved the problem. but doing so, i am not able to access the router. the default ip's don't work, nor could i find the ip of the router on the network.
so what i want to do is reset it to factory settings and just use it as a hub/switch w/ wireless. don't want to use it to connect to the net automatically.
I have just switched to a new internet provider (UnityMedia in Germany) and they provided me with a CISCO cable modem (EPC3208G) and a 'wireless N 150 Home Router DIR-600' (hardware Bx and firmware 2.13). I had to ring the service desk to complete set up. I was told to connect the LAN cable (from the modem) into LAN number 1 rather than 'internet' (in the router). I was also told to change the router IP address to 192.168.0.2. Thereafter the connection to the internet was established (they also asked me to make some other changes which I can no longer recall). However after the phone call with the D-link service desk I attempted to connect my other internet enabled devices (kindle, internet radio and smartphone) and apart from one other laptop nothing can connect to the internet.
View 5 Replies View RelatedI'm using an AMBIT cable modem/router with the DIR-815.The Ambit is in pass through mode.I have 2 wired machines and 1 wireless laptop. I can access the router from all the machines...but none of them can access the internet.
View 5 Replies View RelatedI upgraded to the new FW today 2.07 and everything seemed fine. Then suddenly i lost my internet connection. I can connect through the modem ok. Cables are ok. I am using my desktop with a wired connection. The 'world' light is not on
View 2 Replies View Related-Modem Type: Motorola Surfboard (SB6121)
-ISP: Charter Communications, Cable Internet
Unsure why this happens exactly, but every time the D-Link System restarts itself (and at on other random occurrences ever few hours), my D-Link DIR-655 becomes unable to re-connect to the internet. I can only assume it maintains a connection to the modem itself as the "globe" icon on the router becomes orange. No matter how long I wait, the router will not reconnect to the internet.
I am unsure where the problem lies either within the Router or the Modem, but it seems the other routers I own do not have this same problem. The odd thing is that the modem's "internet connection" light never goes out, and the "link" light remains on. The only solution seems to be restarting both the router and the modem, restarting just one won't do.
This is strange. I have a client who owns the DIR-601 router. It connects to a COX cable modem.
The wireless side works fine. I can access the internet using wireless connection with no problem. I can connect my Linux laptop both wired and wireless no problem.
However, and this is the puzzle, I cannot connect his Vista computer to the internet. It worked for a while then just stopped. From the Network and Sharing screen we can see a good connection to the router, but a big red X from the router to the internet.
I can ping the router with no problems, but I can't ping anything on the net either using a name (www....) or an ip address.
We changed from dhcp to static ip but that didn't work either. Changed the DNS to the ip address of the COX DNS just in case that was the problem. Still the same.
I have had COX over to check everything out and everything is fine on their side.
I have Googled all over the place and not found anything that's useful. I did find one post about a 625 that said to change the WAN speed from auto to 10 or 100, but from what I see the 601 doesn't have this capability.
My new DIR-601 router has been installed and configured but will not connect to the internet either wireless or through a wired connection. Have reset and re-installed, have rebooted router, modem and computer all with no change. Connection is DSL (AT&T) and works fine when connected to either desktop or laptop computer at home. AT&T says to contact manufacturer, D-LINK says to contact ISP. After nearly two months without our wireless (XBOX and Netflix) we are about ready to return this before return period is up and just go with Clear.
View 1 Replies View RelatedI'm having issues with my wireless router. When i'd set it up it worked perfectly.I decided to take it to my mother's house because the default wifi range there is too short,When i'd set it up, all lights burn green but can't connect to the internet in any way.
View 3 Replies View RelatedIm using a Tp-link wireless router and I have a modem attached to my pc. I just noticed that if I turn off my router, the Ethernet light on my modem turns off, but the power and dsl lights are still on. Is there a way for me to use my pc even if my router is turned off? If I remember right, i've tried it before and it worked... But now, I have to turn on my router just for me to be able to connect to the net on my pc.
View 3 Replies View RelatedIt's not on one device, and it doesn't matter if you are connected wirelessly or by cable. It also doesn't matter what internet browser you use. I would guesstimate that every 5-15 mins the dsl broadband just gives and all internet goes down for probably 1-3 mins at a time.I honestly have no idea. I'm using a 2Wire, just what AT&T gave me. I'm guessing it's either the dsl filter, or the actually router itself, i'm just not sure how to go about troubleshooting and figuring out the root of the problem.
View 1 Replies View RelatedToday I got a new modem, which gave me internet on the computer. I still can't get online on my PS3 or IPOD. How to create a new wireless connection. Also the World icon on the router is red but everything else is green.
View 5 Replies View RelatedI just got this router and it is working with my pc. wireless internet, however is not working despite trying to connect through a USB drive. My laptop which is what i'm trying to connect to the internet from is not picking up my server, and i'm wondering if the problem is that I have not used the cd that came with the router. My laptop does not have a cd drive and I do not have a portable drive to connect it to.
View 1 Replies View RelatedI bought this new router, I've followed the CD and install everthing. My computer can connect to the router, but it doesn't connect to the internet.
View 1 Replies View RelatedI recently purchased a new Dlink DIR-655 router. My motivation was a router with a USB port. I initially purchased a DIR-632. I have 1 desktop without a wireless card so it connects to router thru ethernet cable. I have 2 personal laptops with wireless cards and 1 work computer also with wireless card. With the DIR-632 all computers would connect to router, but my work computer (Dell) would connect but then intermittenly show no internet connection. All other computers had no issues connecting to internet ( wired and wireless) The Dell would connect and have internet connection if I used a wired connection. After talking to DLink Tech support they said that i had an issue with the Dell. I called Dell and they walked me thru several things. Nothing worked. They ultimately sent in a tech who replaced wireless adapter and did a diagnosis before leaving and the Dell was deemed to be in perfect working order. I tried connecting again after Dell's repairs and same issue. DlinK Tech support then said the issue was with router and suggested replacing router. Went back to place of purchase and obtained the DIR-655. Got home and exactly the same issue. Again on the horn with Tech support and issue was determined to be bad router. Went back to place of purchase and got another DIR-655. Got home tried new router same issue. Spent in excess of 4 hrs on the phone with level 3 tech support. We tried many, many possible fixes and it appeared as if we had the problem fixed, but within a hour of hanging up with tech support the issue was unchanged.
As the Dell is a work computer I use it a multiple locations, some with no issues connecting wirelessly and one location the same issue as at my home (interestingly enough this location uses a DIR-655). At this 1 work location it says I'm connected, it says there is internet access, but I cannot do anything on the internet.(I can connect without issue with an ethernet connection) At my home location I can connect to the DIR-655 wirelessly, it initially shows internet access and I might be able to access a single webpage, but then it states no internet connection, but it is still connected to the DIR-655.
My initial DIR-615 and the Dell works perfectly fine. However that defeats the purpose of me buying the DIR-655. Ideally I want only the DIR-655 with all computers connecting thru it.
The ISP is a satellite connection. The modem is a Hughes HN9000. By spending 4 hours online with tech support we have changed the channel used, specified specific DNS locations, IP addresses, renewed DHCP, you name we have probably tried it.
The Dell for some reason just does not like the DIR-655, as it connects to the DIR-615 and 1 other work location router, but it will not connect at my home or other work locations (both DIR-655 routers).
I got D-LINK DIR 651 Wireless Router, so i upgrade this Router to this firmware 1.10NA, release on Aug-24-2012, after this this i configure thois Router with my Modem MOTOROLA SB5101N. So the internet is working fine about an hour, there after on my Modem Send/Received light totally goes OFF, now there is no internet at all in my Home.So i unplug all & i connect my Modem directly to my PC after this i am getting internet perfectly on my PC. Then i call to my ISP they said this is not their problem from theoir site all OK.
[code]....
I have a DIR-655 B1 with FW 2.05.I have different computers/phones connected to internet via the router, both via wifi and ethernet. I have Linux/Windows 7/Android and iOS units. Two weeks ago one of my Windows 7 laptops did not connect to internet and I thought it was the computer. I did a lot of troubleshooting the computer, still did not work at home. When I brought the laptop to a friend it work directly. Now I started to think that it was the router that was the problem. On the status page I can see that the machine got an IP address in the "LAN Computers" part. I can confirm in the laptop that it received the same IP address via DHCP.
I have look around in the menus but can not find anything that should make this computer not connect. I can not even login to the router via this computer.
I just bought DIR-655 yesterday and tried to set it up through the CD but without success. My problem at first was I couldn't get internet connect via router (but PC to DSL modem direct connection is always all right). Then I played around to turn on "Advanced DNS service" then I got internet connection via router to my PC. However sometimes the web site names couldn't be translated by DNS correctly and it resulted in "Not Found" and I am pretty sure those web sites are active and running (as I have no problem to access those if I connect DSL modem to my PC directly). Also I noticed wireless connection was very slow and some You Tube videos would stop playing after around 30 seconds and DSL modem had no further activity at all. Why couldn't I use 192.168.0.1 (default IP) as primary DNS (as I got no internet at all if I did so)? Is it really necessary to turn on "Advanced DNS service"? How can I get internet access if I turn "Advanced DNS service" off?
View 4 Replies View RelatedRegion : Sweden
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP :
I'm trying to replace my old router with the TL-MR3420 but I cannot reach Internet.
I get "Internet" directly by a Cable into my apartment. This Cable is connected to the WAN input. Then I connect my computer to one of the LAN ports. (The Cable Connections are done exactly as on my previous router.)
The setup on my PC (running Windows 8) is as described in the manual (IP address automatic and DNS server automatic).
Internet doesn't work and I cannot reach the router from the browser using 192.168.1.1.
I'm not using any 3G and of course I have restarted the router (and PC) a couple of times. I thought I could just replace my old router with the new one... but NOT.