D-Link DIR-600 :: Won't Auto Connect To Internet
Dec 18, 2010
I've gotten a dir-600 and have been trying to configure it so that it won't auto connect to the internet. Some people in my network prefers to manually connect to the internet from their pppoe dial-up on their PC. I've tried changing it to static or dynamic ip in the LAN config, but everyone connected to the router from LAN couldn't dial out as well. changing it to ap allowed everyone (including wireless) solved the problem. but doing so, i am not able to access the router. the default ip's don't work, nor could i find the ip of the router on the network.
so what i want to do is reset it to factory settings and just use it as a hub/switch w/ wireless. don't want to use it to connect to the net automatically.
View 2 Replies
ADVERTISEMENT
Dec 25, 2012
About six months ago I replaced my old router (some generic 802.11b/g router I got for free with a rebate years ago and which lasted a few years) with a Dir-601 after the old router started intermittently cutting out. Setup of the Dir-601 was straightforward enough and I have WEP enabled. Both my Macbook and my wife's Macbook can connect fine if we choose the router from the drop-down wireless network list, and the router has been consistently reliable in maintaining a connection as long as the OS is running.
HOWEVER, neither computer will remember the wi-fi network and won't auto-connect when waking up from sleep or after a restart. Our iPhone and Android smartphones remember the network just fine and auto-connect every time, zero issues. I've gone through all the typical Mac troubleshooting steps, deleting saved network connections and re-establishing new ones. Never solves the problem. We always have to go to the wireless network menu and manually select the wifi connection to connect to.
It's not the Macbooks. Firstly, both macbooks have the same issue, and they're each running different MacOS versions, so there's no version-specific issue that can be at play here. Secondly, neither macbook had this issue with any previous wifi router. Thirdly, anywhere else we take our macbooks where we've set up a wifi connection, they remember it and auto-connect without us having to manually select the network. The only network where we have to manually select the network every time is the one set up with the Dir-601. In fact, we're at my inlaws for the holidays and our Macbooks have been auto-connecting to their router each and every time.Is there a setting I'm not seeing on the Dir-601 admin page?
View 3 Replies
View Related
Apr 14, 2013
I set up a DIR-655 router for a friend 4 years ago and it's worked reliably with all of their equipment since. They have wireless printers, iMacs, pc laptops and iPhone 4S's, all connecting without any problems. Recently, they got an iPhone5 and it will not connect to their home wireless automatically, they have to re-enter the password each time. They've tested their iPhone 5 on other networks and they do not have to re-enter the password. Apple and ATT are blaming the router. I do not live near them and I'm going to have to facilitate them remotely. At this point, I believe their router is configured with WPA2, but I can't be sure. Which configuration will work with the iPhone 5, as well as their other, older, devices that have worked for 4 years
View 1 Replies
View Related
Dec 16, 2012
Just recently had Frontier WIFI router installed. How do we set up our Dell laptops to run off that WIFI without going through the process of selecting which signal we prefer process?
View 1 Replies
View Related
Dec 14, 2012
Region : Malaysia
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version : 3.13.12 Build 120703 Rel.58323n
ISP :
I'm using the TL-MR3220 hardware version 2.0. Firmware version 3.13.12 Build 120703 Rel.58323n. I'm using D-Link DWM-156 3.75G HSUPA USB Adapter.The problem I'm encountering is the router does not auto detect the 3G USB adapter when I power up the router. The router will detect the 3G adapter only when I plug out and plug in the 3G USB adapter. I used to have the same router but version 1.2. Version 1.2 does not have this problem.
View 4 Replies
View Related
Mar 14, 2011
I having issues with DView 3.11 on a WinXP Professional with SP3.There are 4 DCS 5300G cameras wired to the router.I can see the cameras using IE, but when I try to configure the DView in the camera section with the autodetect button it will show an error that the camera cannot be identified.I had checked the IP address, port, user & pass everything is ok. I even hard reseted one of the cameras and it won't work.
View 1 Replies
View Related
Jan 20, 2011
I've setted the unit in BRIDGE MODE, and attached on it 3 LAN devices, 1 PC Desktop, 1 NAS WDBE and 1 HP printer ... OK all config process was right and all my units talk togheter via AP Netgear DNG2000, and so i can use for instance the printer with my laptop too connected in WI-FI N. Now usually, In the night I turn off all my devices (DAP included), and when in the morning I need only the printer used by my laptop, obviously I turn on ROUTER - BRIDGE - PRINTER - LAPTOP but NOT the DESKTOP ... and so the DAP can't reconnect automatically to the router (both the lights AP/BRIDGE are on and fixed) ... I turn on the PC and the BRIDGE reconnect to the world .... BUT I DON'T WANT turn on everytime the desktop !
1) all gears has fixed IPs
2) DHCP server deactivated on the AP main router (DNG2000)
3) no WPS used, only WPA2-PSK (AES) personal keys on all gears
once that DAP-1522 is connected to the router .... all work fine (also when I turn off the DESKTOP).so the workaround is never turn-off the DAP ? I can't believe ... and who will save the energy planet
View 2 Replies
View Related
Apr 21, 2011
I am trying to sort out an IP problem on my mates PC. I have setup a Linksys wireless router on his home broadband and it works fine with my laptop and gives me a DHCP address. When I try to connect his home PC either with a wireless dongle or ethernet connect it gets a Public IP address through the router and not one of the DHCP addresses. Even if you give it a static IP address and setup the router to accept it when you turn the PC on it still gets this public IP address. It is associating with the wireless router but only gives a local connection. I have done the ipconfig and it just renews the public IP address to a different one
View 3 Replies
View Related
Aug 23, 2011
I'm renting a basement at the moment and I am trying to get my desktop to connect to their wireless network. My laptop is fine but the desktop just keeps restarting itself when its attempting to connect. This didn't happen before I moved. When it finishes restarting there's a popup asking to send a error report to Windows. Since I have no internet that won't I clicked the details of the error message this is what I see.[CODE]
View 2 Replies
View Related
Nov 17, 2008
I have problem auto connect Easy VPN client to Easy VPN server using saved X auth username/password. The ez vpn client is a Cisco 2691 using IOS 12.4.15T7. The config is as follows:
crypto ipsec client ezvpn EZ
connect auto
[code]....
the router keeps prompting me to manually enter username/password. connectivity will work be established after i manually enter the username/password. But this is not what i desired. I need it to connect automatically.
The Ez vpn server is a 7200 running 12.4.22T. Config as follows:
aaa new-model
aaa authentication login USERAUTHEN local
aaa authorization network GROUPAUTHOR local
[code].....
View 7 Replies
View Related
Jul 1, 2012
I am working on a Compaq cq50 which I have re-formatted running Vista Home Premium.It connects fine with my LAN, and also connects wireless when I push the wireless switch...however it won't connect wireless automatically when I boot..I always have to push the button.I don't think that is normal.I went to services and stopped the auto wlan and then deleted the existing profile and then re-established the wlan services and account..
View 4 Replies
View Related
Mar 24, 2013
Just installed N600 Play router. All computers and phone connect fine, but computers won't auto connect after reboot or sleep. With old router this worked fine.
View 4 Replies
View Related
Jan 13, 2012
I have verified that I am set to auto connect however my wireless does not do so upon start. I have to do so manually each time I use my computer. This is a new problem since installing the newest driver update because I could not connect at all or randomly. The update fixed the connection problem and I no longer have dropped connections and wifi connection back to normal. HOWEVER it has left my auto connect nonfunctional.
View 7 Replies
View Related
Aug 16, 2012
I have a Dell E6420 running WIN7 32bit. It is running the Dell broadband utility. I am trying to find a way to keep the users from selecting auto-connect in settings>config. I am looking for a registry key or something that can be done from the admin side to stop this.
View 3 Replies
View Related
Mar 1, 2013
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
View 12 Replies
View Related
Dec 14, 2012
I have webcams that need port 8081 opened and I did that, everything worked fine until my DIR655 jammed up and power cycling it and the modem 3-4 times DID not make it work: no internet access and it was definitely a DIR655 problem. So, out with the paperclip to do the big reset, causing me to lose my configuration. When "most" of it came back up with my new config (I had screen prints), all was okay EXCEPT the webcams. Addresses and ports were all configured properly, address was fixed too on the client computer rather than use DHCP. I had a DNS relocation service running (DYNDNS) for the WAN side, but that address (My IP) didn't change either. I tried EVERYTHING. Finally, I realized in all my screwing around that I had enabled UPnP in my application, something I hadn't done before, but did this time as a desperation move. UPnP had always been checked off in the router. So.....I REMOVED my port forwarding and virtual server settings (either one worked before), and voila, everything working, Is this a normal occurrence, that if you have UPnP running, that this auto configuration overrides any manual configuration?
View 2 Replies
View Related
May 6, 2012
some problems I was having with the wireless schedule forcing a router reset when the schedule was enabled. D-Link eventually conceded that the problm is a faulty router. However, to have the router replaced will take 2 - 3 weeks, meaning I have to buy another router if I don't want to be offline for that long. So I've decided to save up my money to buy a new modem, and I've found that by having wireless enabled at all times works around the problem.However, around the same time I started diagnosing that problem I was changing various settings. At the time I may not have mentioned I have 2 PS3's here. These stopped being able to connect to the internet at around that time, and the kids tell me they didn't tell me about it because they knew I was working on other router problems, but now they want their PS3's to work on line so they can play online games.I have tried automatic configuration and manual configuration. I have the MAC addresses in the router, have set them up in the Network filters, and have a DHCP reservations. I have used the routers DNS and also tried OpenDNS addresses.I keep getting error 80710102 (DNS error), and when I first turn on a PS3 807101FF. Both PS3s exhibit the same symptoms.
View 2 Replies
View Related
Jan 13, 2012
I have a simple(?) problem with my old router. I had this for 2 years but I never used it till today. So its brand new, just without warranty . Long story short, this router can't connect to internet. I tried resetting the router, newest firmware, stock firmware, chaining the Ethernet wire, etc. Nothing would work. The weird thing is, I can connect to the router both wirelessly and through the Ethernet port, but the router can't "communicate" with my Netgear cg3000d. I used the wizard to set it up.
View 4 Replies
View Related
Aug 23, 2012
I have a DIR-600. but now, it can not connect to internet.this is images when i connect mordem internet with Dir600. (mordem running good)And when i connect my laptop with Dir600?
View 1 Replies
View Related
Apr 13, 2012
I can't connect to the internet. I connect the cables but the router doesn't connect to the internet. I contacted to my ISP and they told me to put this settings but I don't know how to put these
Settings;
Type: Bridge
Encapsulation: LLC
VPI: 8
VCI: 35
QoS: UBR
Modulation: GDMT
View 2 Replies
View Related
Aug 5, 2011
I recently bought this router and I've set the router too many times and keeps doing the same thing. I've used WPA WEP and without security and the same the router still dosen't want to connect to the internet.
View 10 Replies
View Related
Jul 30, 2012
I'm having troubles getting my router to work today for some reason. I'm with teksavvy and I've had the router for 6 months now and this is the first time I'm having problems connecting to the internet.
Any laptops or desktops in the house that connect wirelessly cannot load anything related to the internet. If they are connected by an ethernet cable then only skype works for some odd reason. When I connect directly to the modem with my desktop it works perfectly. I tried unplugging the router for 5 minutes many times and that hasn't worked. I've tried power cycling through it as well, modem -> router -> computer and it does not work. I've also tried resetting the router as well, holding the reset button for 20 seconds. During the setup, the router could not detect an internet connection. After the setup it was the same situation as I started with. None of the computers can connect via router.
View 1 Replies
View Related
Jul 9, 2012
I have a D-link DIR-655 router which used to be able to connect to the internet fine through my modem. However, it wasn't connecting to the internet when I woke up this morning. I tried all the standard replacing the cables, powercycling the router, modem, and rebooting the PC. After trying all that, I used the reset button on the router and reconfigured manually by entering the IP into my browser and logging in that way, but still nothing. I can connect to the internet by plugging the modem directly into my PC, but connecting through the router or wirelessly doesn't work. I can connect to the network itself through the router, and wireless from my laptop, but it only has local access.
Here's the ipconfig going through the router:
Quote:
C:UsersSolon Family>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : SolonFamily-PC
[Code].....
View 3 Replies
View Related
Mar 3, 2011
I have had this router and everything was working, I have moved and after getting my internet activated I proceeded to set-up a network in my new place. The setup process went smooth but even though I can connect to my network, I cant connect to the internet. I know my internet works as a direct connection through the modem works. I updated the firmware, I tried doing a factory reset on the router, basically did all the basic stuff that one would do if they had router troubles.
View 14 Replies
View Related
Feb 7, 2012
I have a wireless laptop that works with the D-Link 524 but when I went to a D-Link 655 it wouldn't work and I have 3 computers on Ethernet and my Roku works but after 4 hours with D-Link Tech support it still can't connect to the Internet wireless but is ok with Ethernet. I have another laptop that works with this router on wirerless also. Could it be the labtops internal adapter.
View 4 Replies
View Related
Apr 2, 2011
I am having a problem with my tivo RS-TX20. I just got this for my daughters room on ebay. When going through the setup it wont connect to my home network. I am using a Microsoft MN-510 adapter. It finds the adapter in the initial setup but when it is finally trying to connect to the internet the connection fails and an error comes up saying the adapter could not be found. I am thinking it must have something to do with my DIR-655 router because I have the same exact tivo in another room and it works perfectly. I even took the tivo wireless adapter from that unit and tried and the same issue occured.
View 1 Replies
View Related
Feb 27, 2012
My DIR-601 doesn't connect to the internet. I connected it through a cable to the modem, and the router to the computer. It worked for an hour, I could even set up the wireless and it worked. Since, I cannot connect the comupter to the Internet through the router, even using the cables connection. I connect to the router, but the router does not connect to the Internet. The modem works properly.
View 1 Replies
View Related
Feb 15, 2011
I bought a Dlink Dir-601, I was able to connect to the internet when we were with our last internet provider but after we switched companies it no longer connects to the internet. I've tried power cycling my system, updating the firmware, factory defaulting it, resetting it with the button on the back but no luck yet
View 4 Replies
View Related
May 17, 2011
I am facing a strange problem with my DIR 601 router. I am not able to access internet when I plug in the cable from my model to slot marked nternet' on the back of the model (which I guess is the right way). However, I can access the internet if I plug in the cable coming from modem into any of the 4 ports marked as 'LAN'.
View 2 Replies
View Related
Dec 11, 2012
We have a DIR 655 router that I have set up with LAN and WiFi, all good.Today we received our mast and antenna from Vodacom (ISP) with the Public IP's to enter into the router. We connected the LAN cable into the Internet Port and did a manual Internet Static IP setup. But as soon as we click save it says: Type is not for 3G... How do I go about entering the public (static) IP's we received from the ISP in order to get the Internet operational?
View 8 Replies
View Related
Feb 3, 2013
I have just switched to a new internet provider (UnityMedia in Germany) and they provided me with a CISCO cable modem (EPC3208G) and a 'wireless N 150 Home Router DIR-600' (hardware Bx and firmware 2.13). I had to ring the service desk to complete set up. I was told to connect the LAN cable (from the modem) into LAN number 1 rather than 'internet' (in the router). I was also told to change the router IP address to 192.168.0.2. Thereafter the connection to the internet was established (they also asked me to make some other changes which I can no longer recall). However after the phone call with the D-link service desk I attempted to connect my other internet enabled devices (kindle, internet radio and smartphone) and apart from one other laptop nothing can connect to the internet.
View 5 Replies
View Related
Aug 18, 2011
I'm using an AMBIT cable modem/router with the DIR-815.The Ambit is in pass through mode.I have 2 wired machines and 1 wireless laptop. I can access the router from all the machines...but none of them can access the internet.
View 5 Replies
View Related
Jul 14, 2012
I upgraded to the new FW today 2.07 and everything seemed fine. Then suddenly i lost my internet connection. I can connect through the modem ok. Cables are ok. I am using my desktop with a wired connection. The 'world' light is not on
View 2 Replies
View Related
