D-Link DIR-655 :: Crashes ISP's Modem
Oct 1, 2011
I started having an issue with my modem earlier this week where drawing a large amount of bandwidth will cause it to crash. I called up my ISP (Mediacom) yesterday and had someone over to swap the modem out, but the problem is still there. The only solution I was able to find is if there is a direct link to the modem from my computer (ie, not connected to router anymore) then the modem never shuts down. I have no idea what on the router could cause the modem to shut down under heavy loads. And the loads I am describing are anything from streaming HD videos to downloading game through Steam. Normal web browsing is fine though. What I can do on the router (or configure on the modem; it's an RCA DCM425) to keep this from happening?
View 9 Replies
ADVERTISEMENT
Dec 28, 2012
Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631v1_0.6.0_1.0_up(121214)
ISP : TPG
I've noticed the modem becomes unresponsive under use with torrents and only thing that works is to turn it off & on from power button then works for a few more minutes then crashes again on the latest firmware.
View 8 Replies
View Related
Dec 27, 2012
Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631v1_0.6.0_1.0_up(121214)
ISP : TPG
I've noticed the modem becomes unresponsive under use with torrents and only thing that works is to turn it off & on from power button then works for a few more minutes then crashes again on the latest firmware.
View 1 Replies
View Related
Apr 15, 2013
I have just bought an X1000 box, it seems to be randomly locking up and the only way around the issue is to reboot. I have also noticed it can't seem to handle streaming video either.
My ADSL has been checked and all is OK and if I don't stream video generally things seem OK for a couple of days. If I run a continual ping to the unit you can see that now and again the request times out but then some times comes back and other times I need to reboot again. The log file seems to show very little either.
View 1 Replies
View Related
Jan 28, 2011
DIR-655 HW: A4 v.1.35NA
DNS-323 v.1.09 (latest)
I have setup DNS-323 FTP using the default port (21) as instructed in the manual.*Advanced/User: username/password. [code]....
View 2 Replies
View Related
Apr 17, 2012
I have a D-Link DIR-615 router, hardware version E3, firmware 5.10
When I go to get a list of servers when playing games online, my router lights up and then crashes, and I cant get on the internet again until I exit the game. Although, some games do work. There are no problems with my firewall, and if I connect directly to my modem, I can play fine.
View 1 Replies
View Related
Nov 10, 2012
I have an dir-615 h2 with upgraded firmware to 8.03 instead of the default that was 8.02, now it crashes and i cant reach the router on cable or wireless. its dead and i have to restart it to work.. where can i find the h2 8.02 firmware.
View 7 Replies
View Related
Jan 10, 2013
Region : Spain
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Telefonica-Spain
'm having the same problem my tp-link freezes several times a day and only a hard reset will get it working again. I have no idea how to fix it, I have contacted tp-link support and they say to make sure I have all the right ADSL configuration parameters.
View 7 Replies
View Related
Dec 15, 2010
As the subject suggests I have an issue with a ME-3400 that crashed when the fibre patch was pulled.
This is the reduced output from #show cpu proc
198 78753 213 369732 46.38% 37.30% 13.32% 0 IGMPSN L2MCM 213 21813 468 46608 11.23% 9.90% 3.69% 0 REP BPA/EPA Proc
Amongst other things this was pulled from #show log
Dec 15 11:01:38 WST: %SYS-2-CHUNKEXPANDFAIL: Could not expand chunk pool for REP Cam Flush . No memory available -Process= "Chunk Manager", ipl= 4, pid= 1-Traceback= D9BAA8 D9C1F4 1738F20 A6E77C A6524CDec 15 11:01:46 WST:
[Code].....
View 3 Replies
View Related
Aug 3, 2009
Have 13 DCS-920 Every few days a few random cameras will will hang/become unresponsive at random intervals. The cameras require that I unplug the cameras before they will respond. When the cameras are unresponsive I cannot access the camera via a web browser, the D-View Cam software, or the setup wizard. This is a problem as they are all mounted in positions requiring a ladder to access.
I have some connected via 802.11g and other hard wired over 10/100 cat-6 Ethernet cable.
View 14 Replies
View Related
Apr 22, 2012
I recently re-installed windows xp sp1 on my computer when i run the setup in it the program appears for a second then crashes and makes a windows error sound.
View 1 Replies
View Related
Dec 26, 2012
Region : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I got a new TP-Link TL-WDR4300, connected it to my online pure sine wave UPS like I did with my previous routers with no problem.After about 24 hours, router crashes - no access to web interface, no internet (wired or wireless), must reboot to get it to work again.Router was replaced, same problem with new router.The firmware is the latest one and is customized for Israel because of 5GHz limitations.I was told by the representative in Israel that I should try to connect it to another AC outlet instead of the UPS.
View 7 Replies
View Related
Feb 13, 2013
Region : Poland
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_120926
ISP :
Recently I've switched to Windows 8 Pro 32bit (from Win XP) and since that moment I have problems with USB Printer Controller Utility. I was able to print test page successfully but printing larger documents (for example PDF file, about 15MB of data needs to be transferred to the printer) results in blue screen of death. Additionally if USB Printer Controller Utility is started "automatically wit Windows" switching user results in BSOD about 30 seconds after the second instance of Printer Controlled is loaded. Right now I've not found any way to use USB Printer connected to TD-W8968 while using W8. WhoCrashes states that the crash cause was Printer Controller Utility. It is very easy to reproduce the crash.
Both firmware and the utility was downloaded from [URL] According to this webpage TD-W8968_V1_USB Printer Controller Utility( For Windows) works in Windows 8.
[URL]
View 3 Replies
View Related
Feb 28, 2013
i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
View 1 Replies
View Related
Feb 26, 2013
when I connect my DIR-655 to the Motorola SB6141 cable modem I notice that the link speed LED on the cable modem never glows blue indicating a gigabit connection, it only glows amber indicating a lower negotiated speed. I am using a Cat6 cable between the two devices and have also tried a Cat5e cable.
When I try and force the WAN port speed to 1000Mpbs in the router interface the cable modem link speed will not light at all with no connectivity. Only resetting to Auto WAN port speed restores functionality albeit at the lower negotiated speed setting.
I'm running the DIR-655 rev B1 at 2.03NA firmware level.
I did connect the modem directly to my PC that uses an Intel Gigabit ethernet card and still had the lower connection indication (Amber) so it seems that the modem might be faulty.
View 4 Replies
View Related
Jun 2, 2012
Set up DIR-615 to act as a router for my modem
View 2 Replies
View Related
Oct 26, 2011
I've searched high and low across the wide web, but I have found no real answer to this problem;Recently, I bought the DIR-655 because the gods of thunder decided to euthanize my old WAP. The original plan was to mate this up with a Tilgin VOOD-modem (modem and router in one; a heap of s**** in my uneducated eyes) in order to make networking within my appartment somewhat easier.
Got it safely indoors, plugged it in as the manual told me, and got it going (my old WAP was also a D-LINK, so the interface was somewhat familiar). Checked cabled connection, worked fine, and I got the wireless-bit to function as well. But then I, or my Xbox 360 to be right on the money, encountered a little problem. As I understand from a little bit of research, I found out that this was a dreaded phenomenon known as
"Moderate NAT"
Before I got the old WAP indoors, I used the onboard router in the TILGIN to do the switching. I used to have this problem back then also, but solved it by opening some of the ports on the modem. Then it switched to "Open NAT", and worked like a charm. Now however, I have ran into a problem I can't dig myself out of. I have tried DMZ, opening numerous ports all the way to the full monty, but I can�t get that NAT to wander into the more acceptable range. And then it became clear that the internet on my laptop was somewhat amputated as well; simple youtube-videos became harder to load (sometimes it actually had to stop for extended streaming!), and this is not acceptable on a 20 mbt DSL-line!
View 8 Replies
View Related
Jan 12, 2013
I ordered the D-link DIR-815 router online at [URL], and I'll be receiving it this Monday which is the 14th, so I am asking my questions on here now, so I could be prepared.
1.) I don't have a wireless card in my PC, so I will be connecting wired to get WiFi via WAN and LAN ports, right? First before I forget, I have a Windows 7 32-bit desktop PC. We are working with a DSL modem residential line without phone line using a coaxial cable, and Ethernet cable from modem into the PC. connecting this D-link router to my modem and WiFi, and for me to use the WPA2 security?
2.) I have an iPhone 4 with Verizon. If I want to use my iPhone to get WiFi from the router, and turn off the Internet on my phone, and use WiFi only on my phone, how would this work?
View 6 Replies
View Related
Aug 14, 2012
Phones will not link to my wireless modem?
View 1 Replies
View Related
Jul 27, 2011
I have some network experience but not a lot so here is my problem.I have a zyxel q1000z from qwest that i want to bridge to my dir 655.I go through the settings to put their router/modem to bridge mode. This units default ip is the same as tslinkink, 192.168.0.1 so i change the d-link to 192.168.0.2. I then go into the D-link and enter my isp's pppoe settings and password. I reboot when i am done but can't connect to the internet.It shows connected but that's it. I want to use the d-link as the only router as the zyxel has very few settings and has slowed down my netflix.
View 2 Replies
View Related
Mar 25, 2012
I need configuring the dsl-320t modem connected to the dir-600 router. Already tried some configuration, with dhcp enabled and disabled, tried to assign a static ip to the router and tried to put the modem in bridge mode, but fail miserably .Now I've resetted both devices, if I connect with the ethernet cable my pc and one of the four lan connectors on the router, and then use another ethernet cable to connect the modem port with one of the other three free router port, I can connect to internet. Any other configuration i tried has not worked.
View 9 Replies
View Related
Apr 20, 2012
Signed up for Sonic Fusion, received ZTE 831 modem in bridge mode, DHCP off.
Have tried many variations of D-Link settings with WAN DHCP and it just does not get an IP address from the ISP. Unicast on/off, DNS relay on/off, SPI on/off, etc.
With the modem settings unchanged, can plug cable from PC directly into modem. It gets an ISP DHCP and works fine. DNS and internet access work, can surf google.com.
Have an Airlink AR525W wireless router. When it is set to DHCP WAN, it also "just works" when plugged into the DSL modem. It is using the router MAC, did NOT clone the MAC from my PC. The Airlink LAN IP is 192.168.1.1, same as the D-Link. The copy-paste from the Airlink configuration screen:
Connection Type: Automatic Configuration - DHCP
Internet IP Address: 173.228.4.46
Subnet Mask: 255.255.255.0
Default Gateway: 173.228.4.1
DNS 1: 208.201.224.11
DNS 2: 208.201.224.33
DNS 3: 0.0.0.0
MTU: Auto
The D-Link was working fine with ATT DSL and PPPoE (this is in SF Bay Area, 94022), but extremely frustrating that it does not seem work to with Sonic DHCP. Called Sonic support, and was able to confirm that plugging the PC directly into the modem works fine. So it seems there is a problem with the DIR-825 (or configuration of it).
View 6 Replies
View Related
May 5, 2012
After uploading dir-615 dd-wrt firmware, it did not lead me to the new page so I unplug it after 5 minutes and replug it. I tried 192.168.0.1 but it seem nothing came out. Then I found that there is no gateway ip address shown up when I use command prompt to search for the gateway ip address. what does that mean? did I clear the software in it?
View 2 Replies
View Related
Oct 21, 2011
I called up the ISP and had him activate the Sb6120 modem.The Dir-655 will not link up with the Sb6120 unless I drop the WAN port speed down to 10MB. Then it will connect. (the light on the modem will come on). I thought the modem was bad so I had the ISP deactivate that one and we tried another Sb6120 samething.I did the firmware update on the Dir-655 to current but samething.
Firmware Version :1.35NA, 2010/11/12
View 4 Replies
View Related
Mar 19, 2011
I get this at random times. My internet disconnects until I reset my modem and I don't think it has anything to do with the modem because I had it replaced by my ISP and they did a few line tests and nothing was wrong. What can I do to avoid having this problem anymore? It's been doing it for almost 2 weeks now and when it decides to do it is random.
View 1 Replies
View Related
Nov 25, 2011
I have a dir 655 coupled with a 320b modem for adsl. Now I must switch to VDSL. Can I use the router with a VDSL Modem? Which modem could be used ? I do not see dlink products ..
View 14 Replies
View Related
Oct 24, 2011
My internet crashes randomly for no reason I can easily see. It usually happens when i'm running my minecraft server and something else that uses constant internet at the same time, such as pandora or playing on the server. it takes down our whole houses internet, and is really starting to piss me off because i run a full minecraft server so i cant really just stop it, and i cant afford renting one. it does this for both the wifi and lan.
View 4 Replies
View Related
Sep 23, 2011
Does any know of a utility that I can install on my workstation that will break my screen with an alert when another computer on my network has lost power. I have 1 computer on my network in an unmaned office that crashes once in awhile and it could be a couple of days before we notice it is down. We want to be alerted as soon as it crashes
View 2 Replies
View Related
Nov 22, 2011
I have a Motorola SB5101 Cable modem, it connects to a Linksys BEFSR81 8-port router. A WRT54G and a vonage voip device also plug into the BEFSR81 lan ports. I am running Win 7 (32bit). When it works, everything works great, but eventually my pc goes link dead, there will be a little yellow apostrophe over the network icon down in the toolbar (next to the clock). I dont have to reboot anything except the BEFSR81 and then everything comes back up and runs fine for a few more hours.
View 6 Replies
View Related
Sep 12, 2012
We just upgraded our AnyConnect clients to the lastest 3.1 and some XP users were having issues. One PC was able to upgrade to SP3 and it resolved the issue. However, we still have several PC's on XP SP3 and are able to install the client manually, but when you go to connect, it sits at Posture Assessment: Initiating... and eventually gives you "Cisco Scaner has encountered a problem and needs to close". It may also give you the same error with other applications that were already running on the PC. What should our first steps be? If we try to connect in any browser, it gives the same error with cscan.exe.
View 2 Replies
View Related
May 26, 2012
I have connected two dsl modems for extending wifi coverage,the main one is netgear and the extended on is D-link,but the problem is the d-links wireless disconnects every 5 minutes or so..i have connected a pc with a cable from this modem but there r no problems with pc internet...so is the hardware of modem faulty or is this due to inappropriate settings of modem,i have disabled the dhcp and changed the ip address already.
View 2 Replies
View Related
Sep 6, 2011
I have a D-Link 2740B with the 2 antennas and sloping black case and for some reason I now can't seem to login to the web GUI via 192.168.1.1. The modem is working OK but there is a setting I need to change.IE says "Internet Explorer cannot display the page"A friend then recommended trying Firefox. This worked the first time but now it is not connecting either. On http://192.168.1.1/ I just get a blank screen.I've turned the power off on the modem for 15 minutes and back on, and rebooted the computer.I've also tried turning Norton Antivirus & Firewall off but this didn't make any difference.I run Windows 7 Home Premium 64 bit with SP1.I've avoided resetting the modem as I am of the understanding that means I have to start from scratch with all the settings.
View 2 Replies
View Related
Jun 6, 2011
i'm trying to connect to my wii n my laptop. i have a cricket broadband hookup to desktop.
View 1 Replies
View Related