D-Link DIR-615 :: Cannot Log Into Modem User Interface
May 5, 2012
After uploading dir-615 dd-wrt firmware, it did not lead me to the new page so I unplug it after 5 minutes and replug it. I tried 192.168.0.1 but it seem nothing came out. Then I found that there is no gateway ip address shown up when I use command prompt to search for the gateway ip address. what does that mean? did I clear the software in it?
View 2 Replies
ADVERTISEMENT
Mar 31, 2011
I cant access the advanced user interface web page through the IP address 192.168.2.1. It's a belkin N router that worked for the first few days but now we can't access the Internet wirelessly if we shut the laptop down and reboot. Belkin talked me through every possible way to connect to AUI but no joy. Even tried using firefox, which worked once but we then lost connection again. Getting frustrated now. May take router back to the shop as it's only ten days old.
View 1 Replies
View Related
Mar 21, 2013
I have a wrt160n v1 that stopped working after a power outage. The power light stays solid and I cannot reset the device with the reset button, power cycle, and I cannot access the user interface at 192.168.1.1. Is it bricked? It doesn't show up on my wireless network and when I try to access it via ethernet cable it shows up as an unidentified network with no network access
View 2 Replies
View Related
Feb 15, 2013
Forgot User name and Password for wireless modem.How do I retrieve my user name and password for my wireless modem
View 1 Replies
View Related
Feb 10, 2012
The rest of us use wifi for our internet services but this isn't good enough for are newest member so they have now connected a cable directly into the modem, so now whenever he is online ALL wifi suffers dramatically! What can i do to limit his bandwidth and allow the wifi to gain more access is there a way to limit via his MAC address or IP address?
View 3 Replies
View Related
Feb 28, 2013
i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
View 1 Replies
View Related
Mar 7, 2012
We have a Cisco 3825 router which does not work well with a DSL modem(ISP provided). I have configured the Gi0/0 port of the router to plug into this DSL modem but it does not ping to the ISP gateway. If we do a shut/no shut on the interface then it work fine for about 30 secs. Sometimes even for 1 hr. Then the packets drop and we cannot pass any traffic through this interface.Now, if the ISP connection is terminated on a computer it works fine. It works fine without dropping any packet. I have tried various options like using a straight/cross cable. I have tried to configure the interface negotiation for 100/full, 100/half, auto/auto and almost all the options. I have also tried to interconnect the devices using a L2 device like a HUB. Nothing works.
View 7 Replies
View Related
Jul 7, 2012
I have an RV110W, there's internet access directly from my DSL modem, but when i connect my router it doesn't see the internet connection. I've changed the network cable and also confirmed the correct configuration in the router.
View 3 Replies
View Related
Nov 8, 2012
Using Cisco 1811W with IOS 15.1(4)M5. FE0 and FE1 are connected to the internet via Billion ADSL2+ modems operating in bridged mode. Both lines are similar so I'll only discuss FE0 from this point on.Local subnet is 192.168.128.0/24 with router on 192.168.128.1 as default gateway. Modem on FE0 has static LAN IP of 192.168.128.2 and when plugged into the switch on the LAN side, the web interface can be accessed at that IP address. Unplug the modem from the switch and plug it into FE0 and it now works as desired providing access from the router to the internet but the web interface is no longer accessable at 192.168.128.2
I tried adding a static route "ip route 192.168.128.2 255.255.255.255 FastEthernet 0" and also "ip route 192.168.128.2 255.255.255.255 Dialer 1" Neither worked and presumably it isn't that straight forward. Possibly NAT or other routing configuration required.Although there isn't much to configure when in bridged mode, I mostly want this setup so I can look at the ADSL connection status and for the modem to write messages to syslog (works when plugged into switch on LAN side), or SNMP access.
View 3 Replies
View Related
Feb 26, 2013
when I connect my DIR-655 to the Motorola SB6141 cable modem I notice that the link speed LED on the cable modem never glows blue indicating a gigabit connection, it only glows amber indicating a lower negotiated speed. I am using a Cat6 cable between the two devices and have also tried a Cat5e cable.
When I try and force the WAN port speed to 1000Mpbs in the router interface the cable modem link speed will not light at all with no connectivity. Only resetting to Auto WAN port speed restores functionality albeit at the lower negotiated speed setting.
I'm running the DIR-655 rev B1 at 2.03NA firmware level.
I did connect the modem directly to my PC that uses an Intel Gigabit ethernet card and still had the lower connection indication (Amber) so it seems that the modem might be faulty.
View 4 Replies
View Related
Sep 2, 2011
The firmware update went smoothly The mydlink service quit accessing the camera, until I download and ran the updated Mac version of the "mydlink Setup Utility v1.0.06_07272011"Seems as if the camera is more stable; ping times are more consistently low.
View 2 Replies
View Related
Feb 6, 2011
I set up an "access control" rule in my DIR-635 and so I have all navigation log from a PC of my LAN. But the URL in log are often truncated.There's a way to obtain a full track for an user navigation?
View 3 Replies
View Related
Apr 28, 2013
Region : Others
Model : TL-WR740N
Hardware Version :
Firmware Version : 120320
ISP : connect communication
HOW CAN I BLOCK USER FROM MY ROUTER WHO USES WIRELESS WITHOUT CHANGING PASS BECAUSE I WANT HIM TO KNOW PASSWORD BUT HE COULD NOT CONNECT
View 1 Replies
View Related
Sep 29, 2011
I'm running a Windows Server 2008 Enterprise Edition server that is currently the domain controller, and a Windows 7 Ultimate client. I have a 'Test' user for messing around with group policy - anyway, on the client Start Menu it has 'Test User' which leads to some form of libraries folder. Is it possible to restrict the link without removing their name?
View 3 Replies
View Related
Apr 25, 2011
Two part question: First is there a way to create a smart tunnel link on a user's home page like you have on the main portal page of the ASA 5550? I see the code that it is using but have not been able to get this to work. Here is that code;
<a href="javascript: parent.doURL('756767633A2F2F70676B636562712E7070757A702E6265742F50766765766B2F4B72614E63632F6E6867752F79627476612E6E66636B',[{name : 'user', value : 'CSCO_WEBVPN_USERNAME'},{name : 'password', value :
[Code]....
Second question when will MACs be able to auto start smart tunnel when the user first logs into WebVPN? Right now the only way I know of starting a smart tunnel on a MAC is a link on the main portal page. I am running code 8.3.2.13
View 5 Replies
View Related
May 8, 2013
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I can view numerous other PDF files from other websites, and even PDF files from TP-LINK, but, the User Guide for the TL-WDR3600 or the 3500 error out when opening in a web browser. If I right click and download them, they will download but then error out on opening.
View 10 Replies
View Related
Sep 22, 2011
We are running ACS 5.2 patch 6 and want to restrict access for users to be able to add devices to the system.For example, admin person in site A can only add devices into the site A group and cannot see/access other sites groups.
View 1 Replies
View Related
Apr 20, 2009
We are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
View 4 Replies
View Related
Oct 10, 2011
I want to create a local user in my Cisco ASA 5520 to allow the user to use the ASDM in Read-Only mode. I want the user to view the Dashboard only.
View 1 Replies
View Related
Dec 30, 2008
I just got the WRT610N and I really like it so far, I'm playing with the NAS option and I can't get it to create any new users or groups. I click on the link, fill out the form and click on 'modify user' (The set-up guide has a button there for 'save settings') and nothing gets created. I tried this several times and there are no new groups or users. I checked the storage.info file and there is no additional users or groups there either. I think I can edit that file but I'm not too sure what these last 2 lines mean
nas_login@admin:admin:admin: off guest:guest:guest: onusers_content@admin:admin:admin:admin: off guest:guest:guest:guest: on
View 8 Replies
View Related
Nov 21, 2012
Is it configurable to allow wifi user to user traffic on WLC 5508?
View 4 Replies
View Related
May 1, 2013
Search for 'DIR-825 timeout' only returned a half page and none were relevant.
DIR-825 2.03NA - The web interface has a ridiculously low timeout value. 60 seconds maybe?
I can't build a list of MAC addresses, e.g., before it reaches the timeout. I try to save.... and I have to log back in. And my changes are gone.
What's maddening is that it WAS working the way I wanted, with seemingly no timeout, until recently when I had to basically re-do my network.
View 4 Replies
View Related
Dec 14, 2012
i can't access to the router interface page at 192.168.0.1 and not from ddns account. but the internet connection working good, and i'm downloading a lot of torrents in background. i just want to check something on the router and can't access to it, until i disconnect from the power adapter and restart it. maybe he's overloaded or something? how to solve this issue?
View 3 Replies
View Related
Nov 19, 2011
When I log in to my router (192.168.1.1) refuses to communicate with me in IE8 or Chrome. It seems to work 'OK' with Firefox (not as smooth as it used to up until couple of weeks ago, but still works).I am getting either no response when I click on specific links under STATUS, or a very slow one. I also get no details at all.For example - I click on Wireless where you can see 'Wireless clients that are connected' and nothing appears even though there are at least 5 devices that are currently connected.
View 10 Replies
View Related
Mar 2, 2011
Well, I've been using my DGL 4300 as a switch, but now I need to use the wireless capabilities it has. I tried going to 192.168.0.1 but it timed out. I pushed down the reset button in the back and hold it for 15 seconds, tried the IP again and nothing but timeout. I unplugged the power cable, held down the reset for 15 seconds, plugged back the power, and still nothing. I've tried various methods, various IP's, and nothing.
View 1 Replies
View Related
May 27, 2011
After my dir-655 recently bought the farm, I picked up a NIB 601 at a local computer mall for about $20. The drawback is that "local" for me means that the router is in Chinese.
Is there any way for the web interface language to be changed to English?
View 1 Replies
View Related
Jan 8, 2009
The setup:
Time Warner Cable Internet Dynamic IP
DIR-655 A3 Firmware 1.21
3 hard wired, fully updated, virus free, windows xp pro machines
The Issue:When only one PC is running or actively being used there is no issue. However, when there is moderate internet usage on a second pc the internet connection will drop (the WAN light on the router stays on as does the ethernet light on the modem) and give this pair of log entries.
View 14 Replies
View Related
Jun 20, 2011
Bought a new DIR-655 Rev B a few weeks ago.It's web admin interface has failed in some way. The device is still passing all user traffic in both directions, but attempts to connect to the admin interface with my web browser, from both the wired inside and the WAN outside fail. I can telnet to the actual tcp port number that it's configured for and establish a connection, but I can't get any response from it. At this point I'm expecting the only way I'm going to clear the condition is to power cycle the device when I get home from work. It is to note I have the device configured for https for the admin interface. Perhaps that's the more 'advanced' feature that's newer and is exhibiting some kind of bug, I wonder. I'm running the latest firmware available from D-Link.
View 5 Replies
View Related
Feb 1, 2011
My DSC-930L's web interface becomes unresponsive about an hour or two after power cycling my camera. It still responds to pings, and it still sends images to FTP when it detects motion, but I can't log into it via web interface, mydlink, or the iphone app. Power cycling the camera fixes the problem for an hour or so but then its right back to not working again.
View 8 Replies
View Related
Jun 19, 2012
owner of a new B1 here. I've seen various recommendations for 2.03 as a firmware, as mine came with 2.04. Why is this recommended? Is there any others that are recommended?Additionally, after connecting up to the router via ethernet (192.168.0.1), the control mechanism for the router is rather slow. I've owned many routers, and this might be the slowest administration/settings page i've seen for a router. Is this normal?
View 8 Replies
View Related
May 11, 2009
I have a DIR-615 rev C with firmware 3.10 and am trying to setup static routing. There is no option to select LAN for the interface
View 7 Replies
View Related
May 12, 2013
Months ago i can enter in the camera interface by using 192.168.1.100 , its correct ip to enter in the cammera ? Now i dont know what is happening i connect the ethernet cable correctly from PC to the camera and i type in the browser : 192.168.1.100 but nothiung happen ?
View 4 Replies
View Related
Jun 4, 2011
I have bought D-Link DIR-600 router from China and I want to change the web interface language to English.
-Router Info.
-firmware version: v1.03CN
-hardware version : A3
View 3 Replies
View Related