D-Link DIR-655 :: How To Use USB Port
Feb 22, 2012D-Link DIR-655 :: How to use USB port
View 14 Replies
ADVERTISEMENT
TP-Link ADSL2+ Wireless :: TD-W8968 - Forward External Wan Port Like 49150 To LAN IP On Port 22?
Nov 18, 2012Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm
How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?
TP-Link ADSL2+ Wireless :: TD-8970 Port Forwarding To A Different Internal Port
Mar 7, 2013Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP : Virgin Media
Is there any way of forwarding an external port to a different internal port on the TD-8970 ?I saw a question posed on an Australian forum implying that it might be provided in a later firmware release.Our TD- 8970 has replaced a previous NetGear WAG 320N which had this facility, and is useful to provide access to multiple machines without having to modify each individually to use a different port.
D-Link DIR-655 :: Subsonic Port Forwarding / Get Machine - Port From Outside / Internet
Feb 16, 2011I am having an issue opening a port (4040) on the 655 for my Fedora-based subsonic server. Inside the LAN, I can see the device from other peer machines, so I am confident the port is open and listening. However, I can't seem to get to the machine-port from outside/internet.
I have tried Virtual Server and Port Forwarding with single port. The server has a stactic IP which I've included in the DHCP range and outside the range. I have a DSL connection (AT&T), modem only. I have updated firmware. I have exhausted the Subsonic community's knowledge, everything points to the router, but all the settings seem correct. What am I missing? Is if possible there is a defect in the router? (don't laugh). Is there a way to trace a request to that port to see where it is hanging?
(yes, I've STFA, but don't know what else to do).
D-Link DIR-655 :: Port Link Light For Powered-off Device Stayed On
Nov 20, 2011 I have a DIR-655 Rev B, in a typical cascaded config: modem > dir-555 > switches & devices, etc.One of the four dir-655 ports is connected to a cheap-o Belink Wifi router which I use as an access point (I only use this because there's one device that only supports WEP). I was debugging a WiFi issue and I pulled the plug on this Belkin just to get it out of the picture. Well, when I did that, EVERYTHING that was connected through the DIR-655 lost connection. (Well, all the wired stuff anyway- not sure about WiFi devices through the DIR-655). I noticed that the port link light for the powered-off device stayed on on the DIR-655. When I unplugged the cable from the DIR-655, everything went back to normal.
So what I'm trying to figure out now is, is this a DIR-655 issue, or is it something screwy with the Belkin? Or Both? I've got to assume that there's some inherent flaw in the DIR-655 that allows something connected to a port to screw up everything that it's hosting.
D-Link DIR-655 :: Use Wan Port As 5th LAN Port?
Jul 18, 2011Is there a way to use the WAN port as a standart ethernet port?
I would like to connect t a 5th computer but I have run out of LAN ports.
D-Link DIR-655 :: WAN Port Is Not Working?
May 19, 2011Recently, something weird occurred. My Motorola Surfboard cable modem (on PenTeleData/Service Electric) and my D-Link DIR-655 don't seem to be getting along.If I plug a network cable directly from the modem into a computer, it works fine. However, if I go from the modem to the router's WAN port, it doesn't seem to want to connect to the router at all (no matter what DNS settings I change on the router (including spoofing the MAC address of a working computer) or which network cables I use; the "activity" light on both the router and the modem remain off).Also, if I take a network cable and plug one end in one of the LAN ports on the router and the other end in the WAN port, it works (well, the "internet" activity light on the front of the router comes on and the status page at http://192.168.0.1/Status/Device_Info.shtml says "Cable Status: Connected; Network Status: Incorrectly configured - check logs" instead of "Cable Status: Disconnected; Network Status: Disconnected").
View 11 Replies View RelatedD-Link DIR-655 :: Can't Port Forward Or Use DMZ
Jan 10, 2011I can't get any type of port forwarding or DMZ to work with this router. I've checked for double NAT, have a static router IP etc.
I'm using Vista, but I've tried it on a computer with XP as well. I'm using the standard windows firewall, but I also tried disabling it.
I'm using the original 1.10 firmware, I don't know if this is a known issue that was fixed or not.
D-Link DIR-655 :: How To Tell LAN Port Speed
Mar 21, 2011I replaced my old netgear router, which died recently, with a shiny new DIR-655 on my gigabit wired home network. Now I see that file transfer from my NAS is very slow (about 1 megabyte per second). I would like to check if the NAS has connected at 1Gbps to the router. I was browsing the "stat" or "attached device info" in the routers configuration webpage, but could not find it. To be precise, I do see the connection to the NAS, but there is no indication of the connection speed
View 2 Replies View RelatedD-Link DIR-655 :: Is PORT 111 Really Listening
Aug 16, 2011I recently had a security scan done on a DIR 655 and the report came back saying PORT 111 (Unix RPC Service) should not be listening for external connections. I've looked through every setting but can't find where this service is enabled (or can be altered) -- aany guidance on this port/service?
View 14 Replies View RelatedD-Link DIR-655 Can't Port Forward Or Use DMZ
Jan 9, 2011I can't get any type of port forwarding or DMZ to work with this router.
I made sure to check everything in the sticky before I posted and it all checks out.
I'm using Vista, but I've tried it on a computer with XP as well. I'm using the standard windows firewall, but I also tried disabling it.
I'm using the original 1.10 firmware, I don't know if this is a known issue that was fixed or not.
Port Forwarding On D-link DES 1008D?
Feb 9, 2011How I do it? I know nothing about this stuff... I can't open the ports.
View 1 Replies View RelatedD-Link DIR-655 :: Unable To Open Port 21?
Jan 4, 2011I have a DNS-323 that I can;t get my FTP to work.For some reason no matter what I try I can't open ports on the DIR-655I have the virtual server set as such. [URL]. Checked with open port tool.
View 6 Replies View RelatedD-Link DIR-615 :: Can't Connect To Notebook LAN Port
Aug 25, 2011I was using this router and Malaysia TM UNIFI service. I can use wireless but can't detect the LAN port. I have try it to other modem router and it's working. Its keep showing my local area connection network cable unplugged and no signal at all. And the router was working well on other PC and notebook.Try many way but still can't work
View 3 Replies View RelatedD-Link DIR-825 :: Accessing USB Port Outside Of Network?
Aug 22, 2012If possible I would like to have access to my external hard drive from outside of my network.While in the network my laptop connects to the Hard Drive using the shareport. If I take the laptop with me then I would also have to take the External Drive with me.
View 6 Replies View RelatedD-Link DIR-825 :: Possible To Connect External HDD To USB Port For NAS
Apr 3, 2013I have a DIR-825 Rev. B1 wireless router running FW ver.NA2.0.7. I want to connect a Seagate 4Tb external HDD with USB 3.0 into the USB 2.0 port on the router to use the hdd as a NAS and run backups of the data files on the computers of my home network. The computers are running Windows 7 - 64bit. Plugging the hdd into the USB port on the computer lets it be recognized and ensured that Windows 7 had the most current drivers. When I plug the external hdd into the USB 2.0 port on the router and then plugging in the hdd and resetting the router, I still cannot get the computer to find the hdd on the network.
View 11 Replies View RelatedD-Link DIR-825 :: Port Forwarding On 825 REVB
Dec 27, 2011I was trying to port forward and could not get it to work. I run a Camfrog room sever of my desktop computer. I needed the TCP port 6005 open to the desktop and UDP ports 5000-15000. I enter that in to the Port forwarding setting but it never work. So later on today I try this I blank out the TCP 6005 in the port forwarding and letf the UDP setting in it and saved it. Then I went to the Virtual server settings and add camfrog3 in the name and put the TCP port 6005 in to it and check it and save the setting and bingo it work.
View 1 Replies View RelatedD-Link DIR-615 :: Port Forwarding For Server?
Feb 8, 2012Alright, so I'm trying to set up a Minecraft server without having to use some sort of hosting program, such as LogMeIn Hamachi. I have tried port forwarding both my external IP from "whatismyip.com" and from ipconfig in the CMD WITH the correct Minecraft port, and others still cannot connect. note that I can only connect to my own server when I use the IPv4 address from my CMD. get my server working so that others can connect? (I have been sure to change my "server properties" file's "server-ip" line accordingly.)
View 1 Replies View RelatedD-Link DIR-601 :: Cannot Connect Using Internet Port
May 17, 2011I am facing a strange problem with my DIR 601 router. I am not able to access internet when I plug in the cable from my model to slot marked nternet' on the back of the model (which I guess is the right way). However, I can access the internet if I plug in the cable coming from modem into any of the 4 ports marked as 'LAN'.
View 2 Replies View RelatedD-Link DIR-655 :: Cannot Forward Port 3390
Aug 20, 2011-hardware: A4
-firmware: 1.34NA, 2010/04/16
-Cable ISP service
-Cable modem without built in router
-wired connection
-Qos is disabled
-I have tried port forwarding and virtual server
-3389 is forwarded fine
I cannot forward port 3390 anymore and I do not remember changing anything. I am trying to forward port 3390 b/c I already am using remoted desktop on another machine using port 3389 and it works fine. It is not the machine b/c I change port forwarding machine using 3389 and it works fine, but I need to have 3389 and 3390 set up.
D-Link DIR-655 :: Suddenly No Net On Ethernet Port?
Jan 13, 2011TWC / Road Runner modem
dir-655 - Hardware Version: B1
Firmware Version: 2.00NA
dap-1522
windows xp
xbox 360
powerphone voip adapter
Here is my setup:
TWC / RR cable modem to 655
655 port to xp machine
655 port to voip adapter
655 wireless to 1522
1522 port to xbox 360
I am no guru but managed to get all this working about 6 months ago. Other than some TWC outages it has been fine.Couple days back the XP stopped seeing the net. It could still see the LAN. The voip adapter and 1522 / xbox 360 still work fine.Here is what I have tried:
Plugged XP in 1522, worked fine.
Plugged XP directly into cable modem, worked fine.
Plugged XP into port the voip is working on, did not work.
Tried other 3 ports on 655, did not work.
Since the XP machine works with the 1522 and cable modem I am assuming the XP machine is not the problem.Since the voip adapter works on the 655 ports I am assuming the ports are not the problem.
D-Link DIR-655 :: No Connection In Internet Port
Apr 7, 2013I have some questions about DIR-655 want to ask.
1.I use it as a AP, no connection in the internet port, however I only see the DNS setting in the WAN interface, so some url setting can not normally run. Do it has AP mode or other setting that can resolve the DNS.
2.I notice that the Time will suddenly wrong something, even I set it to use local time or ntp.
3.I change the wireless setting to WPA Enterprise, and notice that always disconnect and reconnect, When it is disconnect, notebook and phone can not search the wireless, but ping in local is still alive, log also only show that reconnect, what is happen?
4.I run the internet wizard (not at beginning), I do not change new password in the second phase of wizard, however, after the end of wizard, restart the DIR 655, I can not use the password I set before to login and also I try to leave blank in password flied, it also failed, I use the same password in the user(not admin), I can login, is it the bug of wizard, if this situation need to reset the router, can I take the config first?
D-Link DIR-655 :: Could Not Get Port Forwarding Working
Feb 11, 2011I setup port forwarding for many router before, but I couldn't get this one to work.I triple check all of my configuration, they all setup correctly. But the port/ports on the router is not open.
View 1 Replies View RelatedD-Link DIR-655 :: Share Port And Windows 8
Apr 30, 2013I have noticed that the Share port software is available for Windows 7 which I do use on my Windows 7 computer.
If I get a Windows 8 computer, does the same software also work on Windows 8 ? ? ?
D-Link DIR-655 :: Get And Setting Up Port Forwarding?
Jan 18, 2012I have read the sticky about the Game fuel, and i have tried resetting everything, static IP address, all the info i have found on line. i still i keep getting booted when i join a game, or most of the time i cannot join a party. No matter what changes I make it gets worse than factory setting. i have read for hours on different ways to set up the router and what not. i have changed settings on the PS3, router and still getting nowhere.so can some one pls tell me how to set this thing up before i use it as anger management.?i know how to access the router page . but i don't get the setting up port forwarding.
View 10 Replies View RelatedD-Link DIR-655 Blocking Port 69 Outgoing
Jan 12, 2012within ACS 5.3, I'd like to use 2 external authenticator for the same service, like vpn remote-access.For the authentication, I know I can create an identity chain, to query SecurID and then AD, in case of user not found in SecurID.For the authorization rules, I need to provider a wide vèn access for SecurID users and narrow vpn access for AD user.Are there some parameter to use in compound conditions for SecurID ?
View 1 Replies View RelatedD-Link :: DIR 825 - Share Port Version
Aug 27, 2011I am using DIR-825 with share port Version 1.17 under Win 7 with Out post Pro Firewall V 7.1. Although I give {URL}, all rights to access the LAN and WAN it is not possible to get a connection to the router. Only shutting down the firewall entirely works to get access. (This cannot be the solution ). Is there any other file or service for which the firewall needs to be configured? I tried to open different ports for TCP and UDP as well - without any success.
View 1 Replies View RelatedBlock Port 443 Only For Skype In Tp Link Router?
Jul 24, 2012Except email, we want to block every thing for users temporarily through router.If I block all ports from 400 to 65334, skype doesn't work but email also doesn't work.If I open only port 443 among blocked, both email and skype works.
View 1 Replies View RelatedD-Link DIR-655 :: RDP (port 3389) Is Not Working On Network?
Jul 12, 2011RDP (port 3389) is not working on D-Link network - is there a setting in the d-link to allow this?
View 4 Replies View RelatedD-Link DIR-615 :: Accessing Shared Folders Over WAN-Port?
Jan 11, 2013i have a question about accessing shared folders over the WAN-Port of an DIR-615. For your information: both sides of the network (LAN and WAN) are under my control.
On the WAN-side of the network we have a fileserver with shared files. We can ping the server and reach it and the Websites on this server are also reachable from the LAN-side. But if we try to access to the shared folders the request doesn't reach the server. If we change the router there are no more problems and anything works without problems. The Router has default-settings except the network-settings so it works in our network. Does this router block outgoing traffic on ports 135-139 and/or 445? And when yes is there any way to disable this? I can't find it.
D-Link DIR-655 :: Outlook / Exchange Port Block
Aug 22, 2011I can connect to Internet perfectly fine. I can even VPN back into my office. However, once connected via VPN and I launch my Outlook Client, I'm not able to connect to get emails. When I run a "netstat -a", I get my "SYN_SENT" to all my office domain controllers and exchange servers.However, if I connected via my Starhub USB Broadband dongle, everything works perfectly fine.What settings do I need to do on my router? I tried port forwarding and application rules but none worked.
View 4 Replies View RelatedD-Link DIR-615 :: HTTP Listening On Port 65535
Aug 4, 2011I am just setting up a LAN using DIR-655 and I noticed this line in the logs: notice Aug 4 03:25:55 HTTP listening on port 65535
Is the router listening to that port?
D-Link DIR-655 :: Port Forwarding Two Xboxes For COD Black OPS
May 20, 2011So I have two xbox 360's plugged directly into my dir-655 router with Ethernet cables. I have no idea how to port forward these, correctly and everything I try ends up with my router being reset. I don't have a pc connected to the router, only a wireless laptop.
opening ports for multiple xbox 360's (Black Ops is what we are trying to play).
One thing I do know is that when I tried portforward.com's walk-thru for port forwarding, when I enter the ports into the dir-655 port-forward menu, I can no longer connect to Black Ops at all, it says servers are down (WHICH THEY ARE NOT I CHECKED).