D-Link DIR-825 :: Possible To Connect External HDD To USB Port For NAS
Apr 3, 2013
I have a DIR-825 Rev. B1 wireless router running FW ver.NA2.0.7. I want to connect a Seagate 4Tb external HDD with USB 3.0 into the USB 2.0 port on the router to use the hdd as a NAS and run backups of the data files on the computers of my home network. The computers are running Windows 7 - 64bit. Plugging the hdd into the USB port on the computer lets it be recognized and ensured that Windows 7 had the most current drivers. When I plug the external hdd into the USB 2.0 port on the router and then plugging in the hdd and resetting the router, I still cannot get the computer to find the hdd on the network.
View 11 Replies
ADVERTISEMENT
Nov 18, 2012
Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm
How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?
View 1 Replies
View Related
Jul 29, 2011
I currently use a D-Link DIR-655 router on a game server I run and I've been having this problem for sometime now. I have the router hooked up to the internet modem, and then my server computer hooked up to the router's first port. I use port forwarding to forward the game ports, as well as my FTP server ports. I have about 80 clients or so logged in at a time on my server.The issue is the following. Our internet connection has an external IP of 67.23.155.123 (this is just an example). My internal IP is 192.168.0.101.When I do "netstat" to see all the clients logged in to the game server on this computer or when I run Wireshark, every client logged in to the server (for this game application) is shown as having an IP of 67.23.155.123 (the server's external IP).On the other hand, for our FileZilla FTP server, if I run Wireshark/netstat, I can actually see the client's external IP (i.e. each individual IP of people logged into the FTP).If I hook up the server directly to the internet modem, this isn't a problem, and I am able to correctly see the IP of each client logged in to the game server individually.
View 12 Replies
View Related
Jun 16, 2011
I'm trying to connect to my home laptop from work. The home laptop is connected to DIR-655 router. I set up the internal and external ports to 3389 using both TCP and UDP protocols with the Application as "Remote Desktop". From my work PC I enter the external IP with :3389 and it fails to connect. I have also tried accessing internally which is failing too. All computers are running Windows 7 Home Premium Remote Access is enable on all.
View 1 Replies
View Related
Aug 7, 2011
Just updated to the 1.01 firmware on my DIR-815 and now it doesn't handle loopbacks anymore.
For instance, I have a dyndns address of ericnewton76.dyndns.org. This points to my router. Works fine if you're NOT within the router's internal network, ie, outside hosts can get in just fine (try it... http:// , you'll see an IIS7 welcome screen)
However, when INSIDE the network, the requests don't get connected properly, and they used to... ie, I work with code, so my svn repo is at ericnewton76.dyndns.org/svn but inside my network it doesn't connect properly anymore (whereas it used to before firmware update)
So now I wish I could back-peddle to 1.0 firmware.
View 6 Replies
View Related
Apr 13, 2013
I've set up port forwarding from an external port (9000) to an internal port (80) on our SRP541W, and for some reason, it's not working externally. If I access the public address from within the internal network, it works properly.
View 6 Replies
View Related
Aug 25, 2011
I was using this router and Malaysia TM UNIFI service. I can use wireless but can't detect the LAN port. I have try it to other modem router and it's working. Its keep showing my local area connection network cable unplugged and no signal at all. And the router was working well on other PC and notebook.Try many way but still can't work
View 3 Replies
View Related
May 17, 2011
I am facing a strange problem with my DIR 601 router. I am not able to access internet when I plug in the cable from my model to slot marked nternet' on the back of the model (which I guess is the right way). However, I can access the internet if I plug in the cable coming from modem into any of the 4 ports marked as 'LAN'.
View 2 Replies
View Related
Jul 13, 2012
i want to conect my Dir 655 as Wifi to my LAN, i had a fortigate 50b as DHCP and Dlink Switch 10/100 as LAN Switch when i trie to conect the DIR 655 i disable the DHCP, UnP and Firewall. i put a local IP to DIR "192.168.0.221" and the fortigate has "192.168.0.23" then connect the dir to fortigate by LAN Port... when i trie to access via WIFI, dosent work..
[URL]
View 9 Replies
View Related
Jul 15, 2011
Basically, I need my external hard drive connected to my wireless network so I can have access to it from two computers BUT I want to be able to stream my videos/music via a USB 2.0 wire directly to my TV.The problem with this configuration is that the hard drive has one input/output USB 2.0 port. I am going to hook it up to a network enclosure which will solve the having the hard drive to wireless network...but how can I stream data via a USB cable to my TV?A friend of mine told me that I can have a USB connection from my desktop going to the TV - this will achieve the data going from my external hard drive via the network to my desktop and from my desktop to my TV via USBDoes this sound like I am on the right track? I am unsure as to whether I will need any software solutions to be able to have access to the data on the hard drive from my TV.
View 9 Replies
View Related
Aug 9, 2012
I am trying to connect two D-link 24 port switches thru cat 6 cable, distance is less than 50 meters, but its not working but if i connecting it with a Laptop i am able to connect to the network. But if i connect the switch in between it fails i tried changing the switch and cable but no use anyone have a clue how it fails?
View 4 Replies
View Related
Jan 24, 2013
Can i connect my 3g USB modem to my dlink router directly through the usb port.
View 10 Replies
View Related
Oct 28, 2012
Our company uses a commercial copier monitoring package called FMAudit to obtain meter readings from our clients' copiers, and it uses a feed to send the readings back to us. We have used port 90 for this purpose.Due to a recent server crash and emergency reconfiguration of our network, we have moved our FMAudit central server from in-house to a hosted service, with of course a different external IP address.
Without interfering with our other systems, is there a way to redirect JUST PORT 90 to another IP address external to our own? I don't care if it has to happen at the router or server level. We are using Server 2003 and a Cisco 887VAW.
View 2 Replies
View Related
Jan 14, 2013
As a raw test it is handy for us to ping externally the WAN port of the SRP 527W. How we configure the SRP 527W to allow this? FYI we have the inbulit SRP firewall enabled.
View 2 Replies
View Related
Feb 6, 2012
I have a Cisco 800 series ?I need to allow access to our local server from a specific range of external ip addresses.I can open port for all external ip using this command:
ip nat inside source static tcp <localserverip> <port> interface <interface> <port
But this is not secure as is..Do I then restrict and permit access using access-list? Or is there another way altogether?
View 3 Replies
View Related
Mar 5, 2013
I have a little problem with a redirection. When I type my external ip, I am directly connected to my Cisco 861 ( through port 80 (HTTP))
Even if I do a factory default, I always have the same problem. I try to make another redirection on another internal ip , but always same problem...
View 7 Replies
View Related
Feb 20, 2013
Region : Singapore
Model : TL-WR941ND
Hardware Version : V3
I would like to connect a device (dataloger that sends data to a remote server via internet) which only has LAN port to a wireless network on the location. I managed to do this once with WA901ND configured in Client mode (WA901ND acts like a wireless card for this data loger).Does WR941ND support this feature (which feature should I use?) or should I buy WA901ND again?
View 7 Replies
View Related
Jul 9, 2011
I have recently purchased a Linksys WAG320N (firmware V1.00.12) to replace my old ZyXEL P-660H-D1.I've managed to set it up roughly the same in terms of the ports I want open and port forwarding, with one exception: I can enable a port to be forwarded to an IP address on my network, but I can't find anywhere to set it so that the port is only allowed from a specific IP address outside of the network, e.g.
Accept port [some number] from [some Internet address] into 192.168.1.2 but reject attempts from others.I thought it might be in Access Restrictions but that only covers internal IP addresses.
View 1 Replies
View Related
Apr 16, 2013
I am trying to make my WampServer public but nothing i have tried so far seems to be working. It was all good and well before i got a new router from my new provider.
The router is a Huawei HG523a & my ISP is TALKTALK.
These are the settings i have for the port forwarding. Advanced->Advanced->NAT->Port Mapping
Mapping Name: WebServer(HTTP)
Interface: nas_0_38
Protocol: TCP
Remote Host:
External Start Port: 80
External end Port: 80
Internal Port: 80
Internal Host: 192.168.1.2
Enable: Enable
I have reserved the IP address 192.168.1.2 for my computer under Advanced->Basic->LAN->(Ip address Reserve).
I believe this is all i need to do for the router side of things.
Now for Apache: The .httpd file...
Listen 192.168.1.2:80
And that's everything. The problem is that when i put in my public IP address its not forwarding to my WampServer. its just going to the routers log-in page. If i put in my local ip then i get my servers webpage like i should.
View 1 Replies
View Related
Feb 1, 2011
I am trying to setup an RV016 router to do "1 to 1 NAT". I am starting with setting the external IP address of my RV016 to 10.8.58.219 on the WAN1 port, and LAN IP 10.10.20.254. Simple enough. When I connect my laptop to port1 on the router's LAN side I can ping the router's external AND internal IP addresses fine; But I can not ping from outside when connected through WAN1 port.I am performing a simple local test with an external hub, I put a patch cable from WAN1 port to the hub, another patch cable from port 1 on LAN side to the same hub, and from my laptop to the hub. When I use my laptop's IP address with the internal schema (10.10.20.100 for example) I can ping both WAN1 and LAN IP's; but when I use on my laptop the external IP schema (10.8.58.100 for example) I can not ping it. Therefore is not working when I connect my router to the real network.I went into the web setup pages of the router and dissabled: firewall and basicaly all security "blocks" it has, and leave it open for my testing.
View 1 Replies
View Related
Dec 30, 2012
I am a total Cisco novice who has just had a ASA5505 installed to replace a linux freeware firewall (smoothwall).I'm told that the 5505 can't port forward traffic (e.g. ssh) from two external IP addresses to two internal destination machines via the same port # (22 in this example).
View 9 Replies
View Related
Jan 18, 2010
I want to redirect internal web traffic (browsing) to an external web server for Web, Virus and Spyware filtering. Those externals proxies are running in 8080 port. I have one ASA firewall and a Cisco 2600 router. I was thinking in doing PBR in the router but in the next hop I can only set one IP, not an IP and a port. So how can I redirect web traffic to an external proxy listening in 8080 port?
View 11 Replies
View Related
Nov 16, 2011
Can the SRP547W be configured to allow traffic on port 25 from an external ip range to an internal address?
View 0 Replies
View Related
May 4, 2011
I have a couple of ASA 5505's which work fine for what they are doing VPN and all that - we have 1 DLINK DFR-700 Firewall left and I need to get a new ASA to replace this since it is old.
All this box really does is port forward external clients to 1 address on the internal lan for client software updates. Any example configs?
So lets say we have client a with IP 1.1.1.1 and client b has 2.2.2.2 - at the moment this is what happens client a and b come in through http and get mapped to the internal http server 10.10.1.2
So I need to setup about 100 clients which can come in through http only - get mapped to the internal IP and also keeping the internal server to be able to access anything outside.
View 1 Replies
View Related
Jul 25, 2011
I have purchased a subnet of 8 private IP addresses from my ISP. 109.x.x.128/29.The ISP has placed a juniper router within our data centre which is routing purely from 109.x.x.206/30 to 109.x.x.128/29 with the ip of fa0/1 set to .129.
I have linked a cisco 5505 to fa0/1 of the juniper from fa0/0 and configured its IP to .130. I have configured NAT to translate our client pool 192.168.16.x /24 address' to the internet.
Is it possible for the 5505 to route / map my remaing private IP addresses through its external port? I have tried creating a seperate VLAN for a DMZ for our servers to sit within but am returned with a subnetting error as VLAN for my external port is all ready configured within the same subnet.
View 2 Replies
View Related
Feb 12, 2013
How to add an external antenna? I'd like to mount a DCS-930L in a location (inside a metal housing) that would need the antenna to be a few inches away. Any internal layout information?
View 3 Replies
View Related
Mar 3, 2011
I have a home desktop, home laptop, and work laptop that I use. I have Ultra VNC setup on my work laptop that allows me to remote into that machine when I am traveling for work. I have always been able to use the external IP address (not private) to login into the machine with no problem. This week, for some reason, I can no longer do that. When I started doing some discovery, I noticed that when I have all 3 machines booted up at home that the exact same external IP address is assigned to all 3 machines. The internal IP addresses are all different as they should be.Shouldn't each machine have a seperate external IP address assigned as well? Or is this working the way it should? I didn't change any setting on my router or DSL model. But I think the conflict that VNC is having on my work laptop is that it has the exact same IP as the destination computer and it fails. I can remote in if I use the private IP address (192.168.x.x) just fine.
View 1 Replies
View Related
May 26, 2011
I recently purchased the dir-655 router, and am impressed by it's speed. I had no problems configuring the router to my liking, and have found that all of my wireless devices communicate with it flawlessly.
However, my main reason for purchasing this router was for the USB port. I had hoped to connect my 2TB external drive and have it accessible by all wireless devices in my home. To my understanding, the USB port relies on the use of the Shareport Utility. I've installed the Shareport Utility to my laptop for wireless access to my media files for streaming.
Here's my problem. How can I access my media on my external HDD connected to the dir-655 with Apple TV2? I've read several options for PS3 users... and they all seem to involve leaving the pc/laptop running. I would ultimately like to bypass the necessity of leaving my laptop on... but if that's not a possibility, I can live with it being left on.
Therefore, is it possible to access the external drive connected to the dir-655 with my Apple TV 2 by using the laptop as a bridge? Can I access the content via Apple TV by using Windows SMB just as I currently do to access media stored on my laptop?
To summarize, I want to have access to the media on my external drive connected to the dir-655 via Apple TV2.
View 1 Replies
View Related
Apr 24, 2013
Region : India
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206 Rel.60215n
ISP : Airtel India
i Want To Add External Battery In My TL-MR3420 .. Is It Possible . Any One Try It Or Not . I Have Always Power Problem In My Home That's Why i Need Battery For My TL-MR3420... Any One Guide Me .. Any Hardware Diagram For It .. i'm Android Dev And hardware Eng .. If U Provide Me Hardware Diagram Or Any Other Info i Will Add External Battery In It ...
View 5 Replies
View Related
Mar 14, 2013
Both my DIR-655 and DIR-815, when setup as wireless access points, are unable to ping external IP addresses and thus cannot contact the dlink ntp servers. I've disabled UPnP, disabled DHCP, changed the LAN IP address to an available address on the network. The wireless works, devices are getting an IP from the network DHCP server and can surf the internet. But the DLink router itself cannot ping any external IP addresses. But the DLink router itself cannot ping any external IP addresses.
View 3 Replies
View Related
Feb 28, 2013
I would like to record the camera feed (per 5 min. files) on my server (ubuntu or windows)
I Installed a FTP server and tried the option "always" in the "video clip" section, but unfortunately, it seem not possible to record more than 10 seconds files every 60 seconds . I think that this is a bug ?
Do you know, if we have a possibility to record the camera feed, I would like to manage it from the webcam or with an external program running as a service.
View 7 Replies
View Related
Jul 20, 2011
I have a webcam set up on my website that feeds from my router here.
Is there a way to track who checks in and for how long? I have a few folks that have decided to park their butts on the cameras all day long, I want to block them.
I set up a port forward, I think I have everything set up correctly. The cam works fine, just can't seem to find the log where they came from
View 1 Replies
View Related
Aug 22, 2011
I couldn't find a section for the 651.
Alright so I have an SSH server running on my network. I can successfully connect to it from a local computer using the server's internal IP address, AND I can connect to it from a remote computer using the server's external IP address (it's properly port forwarded).
However, when I try to connect to the server from a local computer using it's external IP address, I get a connection refused error. Is there something I'm missing?
View 7 Replies
View Related
