I want to stream/surf YouTube videos frm my wifi to my tablet in 720P resolution.Can I get away with a cheap wifi router OR I have to buy an expensive unit?
Belkin N300 OR Linksys E1500.
Linksys recommends E2500 for streaming multimedia but I will be browsing via youtube, so still it affects me OR I can go ahead with E1500 ?
PC is connected through the router to the internet connection but internet cannot access the video from the YOUTUBE my pc operating system is Microsoft Windows Professional (5.1, build 2600) and processor is intel(R) pentium(R) 3.20GHz.
View 1 Replies View RelatedLenovo core2duo Desktop XP Pro works OK to internet when hard wired to router.Marvell 88E8057 network card with latest May 2011 drivers on XP. Both a gateway laptop and an HP laptop also work hardwired.When I use a Wireless Access point, it works fine with the laptops. However, when I use the Lenovo desktop connected directly by wire to the WAP, I only get "partial" internet access.I can ping yahoo, I can get a google page. But any "thick" content seems to be blocked.I can't play any youtube videos on the Lenovo via the WAP, or view websites with rich content.I get the youtube page, but it hangs on play. the laptops work wether wired to the router, or wired to the WAP. With any content including youtube.
View 6 Replies View RelatedI was able to play youtube and open the website but last 3-4 days every time i try to open the website it say's "Server not found Firefox can't find the server at www.youtube.com...". every other website is opening fine i tryed IExplorer, google chrome and it's the same, scaned for malware, no problems in hosts file, cleared cookies, fixed registry with CCleaner, and still have the problem. My pc info: Win 7 ultimate 32-bit SP1, intel pentium dual cpu E2200, 2.0GB RAM, NVIDIA GeForce 9500 GT, with avast anti virus.
View 1 Replies View RelatedVideos on other sites work fine but Youtube videos won't play when im using either of my routers. They also work fine connected straight to the modem, i've reset, factory defaults, uninstalled and re-installed Firefox. I've tried other browsers.
View 10 Replies View RelatedFor some reason Youtube Videos are running extremely slow in Firefox. It has never been this slow, it lags so much when I even have a video on 360p. The worst part, it lags when advertisements load. I don't know why it's doing this, but I want to fix it somehow.
Yesterday, I edited the start up menu to make log ins a lot faster.
I bought a D-Link DIR-655 hoping to get a faster connection over my Netgear WNR2000.I runs mostly fine apart from the occasional freezes and one other problem: youtube video's won't load. I can search and browse youtube, but when I click on the video, the page loads but the video just doesn't load. I can see the play/pause button and the circle telling use the video is loading. Then that's it. Nothing happens. When I plug back my WNR2000, Youtube videos load fine. Same thing on my roommate's laptop. I bought this router over a month ago so I can't return it, spending $80 on a piece of shit like is frustrating when living off a student budget. I'm just about to throw it out the window
View 1 Replies View RelatedI keep loosing internet conection when i`m watching youtube videos. Conection is wired and super fast fiberopticks internet. Trouble shooter says: no valid IP adress and one other thing. As soon as i restart the laptop everythig fine untill i try to watch again. Afraid i will destroy the computer by constantly restarting
View 1 Replies View RelatedAnd I can't seem to access Google and Youtube on my iPad, even Yahoo doesn't work. It all started when I updated my DIR-655 to the newest firmware 2.07NA because I wanted to have an Open NAT for my PS3 because it was set on Strict and I wasn't able to fix it other than updating my router. Now, Youtube works, but I can't play any videos, it's keep in a infinite loop. And I can't access some sites, such as Google, Youtube Facebook and Yahoo, on my iPad, it just won't load.
I just don't know what to do, I'm not really a crack when it comes to router, I don't know jack about my router to be honest, I know how to set the Wi-Fi, forward ports but that's basically all. It seems that it is a firewall problem, but I don't even know how my firewall settings works! UDP and TCP are set on Endpoint Independent but putting them into default doesn't do much, well it does nothing.
it is starting to get ridiculous, the DIR-655 is full of problems! My connections was always jumping, IP Conflict but now it's fixed, Flash videos wasn't able to run outside Youtube
I just purchased a Belkin N300 and it's advertised as being able to video chat as well as have two computers connected to it. I can't even watch youtube videos with just one laptop connected because the ads take 5 minutes to load. Is this normal behavior for this router? Do I need to upgrade to be able to Skype?
View 2 Replies View RelatedI am trying to stream videos from my windows 7 desktop to my Xbox 360. When I try to do it through windows media player it doesn't work. But when I use some third party software like tversity, my Xbox and pc can communicate perfectly. why does it only work through tversity and not wmp?
View 3 Replies View Relatedwrt54g will not play videos. I have connected my modem directly to computer and it works fine if I connect thru the router it will not play.
View 2 Replies View RelatedI bought a EA3500 router and the setup went fine. I have two computers on the network and both have acces to the Internet. But on one of them which runs Windows 7 and MCAfee Antivirus I cannot watch any videos from Youtube. On the other one which runs Windows XP all videos are running great. I've check the firmware version and it is the last one. I've try to disable the firewall in McAfee and it still does not work.
View 2 Replies View RelatedSince installing the E2500, I can no longer access YouTube videos on my wireless devices. Is this a setting that needs to be changed?
View 1 Replies View RelatedI have a Dell Inspiron 1525 laptop running Vista SP2. My Internet Explorer is at version 7.06. When I attempt to open a video on youtube.com I get the following message:
"Hello, you either have JavaScript turned off or an old version of Adobe's Flash Player."
I checked my Internet Explorer options and I do have JavaScript enabled. I also downloaded the latest version of Adobe's Flash Player and then rebooted my laptop. Get the same the message.
I am certain that I have opened them successfully before on this laptop. I've only had it since December 2008 and loaded only MS Office 2007 and the Shield Deluxe 2009 antivirus software on it.
I have cable @ 15Mbps down, 2Mbps up. The cable line comes into the crawl space in my daylight basement. I have 3 Cat-5 cables running through the house. 1 to the TV downstairs, and then 1 each to 2 bedrooms on the second floor (one of which is my home office). In the home office, this Cat-5 is connected to a 24-port switch. I plug my printer, NAS, computers, etc into this switch.I have a WRT54G2 v1 that I was using as my Router/AP.I have a 1st & 3rd generation iPad. The iPad 3 plays YouTube videos in HD. About 6 weeks ago I started to get slow YouTube video playback on my iPad's. They would play a few seconds, then pause to buffer, etc. It used to be that videos started playing almost immediately and would never buffer.
Using Wifi Analyzer for Android, I noticed my neighborhood is saturated with 2.4Ghz wifi. So, I figured it must be that the 2.4Ghz band is saturdated and if I moved to a 5Ghz band, the YouTube buffering would be fixed.So, I purchased an E4200 (v1 I think) from Amazon. I bought this Router/AP because it supported the 5Ghz band. It also I connected it to my cable modem and setup everything. Still slow YouTube, and now YouTube videos are slow on my laptop (connected via ethernet). I still get ~15Mbps over ethernet or wifi using the speed test page provided by my ISP, but YouTube videos are VERY slow.
I've got a E3000 router and I'd like to be able to stream movies and access files from the USB connected HD on my router to my galaxy tablet.I understand that this can be done. I've poked around and cannot find anything that's worked for me.
View 6 Replies View RelatedI just wanted to know if it's possible to playback mkv's either 720p or 1080p using the media server built in to a E4200 and streamed to a ps3? Everything is setup, the ps3 can see twonky, and has access to the external HD connected to the E4200, but upon choosing any type of mkv all i get is unrecognized format.... Avi's and mp3's all seem to be okay, as does iso's. Only I thought I read somewhere that it supports streaming HD material. p.s. the E4200 came with the latest .13 firmware. although I didn't put it on there, as I picked it up cheaply as it was a returned unit to the store.as this is supposed to be an upgrade from a wrt54gr that was used with ps3mediaserver, but struggled with 1080p's.
View 6 Replies View RelatedHow to feel about having network devices resolve names? Do you typically do it? No? Why or why not?I feel like I haven't seen it set up a lot, but it could certainly be good for specifying logging hosts and things like that.
View 7 Replies View RelatedInstalled new Router. Web site resolve takes ~ 10 seconds. We are running domain. The local DNS is on 192.168.6.2. When the dns is resolved browsing the website is fast. But after few min it gets slow again.
Running ping from Local PC
Pinging google.com [209.85.229.104] with 32 bytes of data:
Request timed out.
[code].....
With my current setup on the 5508 controller, I don't have the ability to see any name resolution for wireless clients. I'm wondering if there is some way that I can enable this.
The reason I think this should be pretty easy is because if I enable the access point feature of a smart phone (Android or iPhone), when a client connects, it shows the client name on the smartphone. What's different about how a smartphone sees the wireless client and how WLC/WCS sees it?
I'm having with my VPN Server on my Cisco 2621xm.
I started by creating a VPN - everything worked great. I assigned the DNS Servers, Domain name, WINS Server so when I connect I'm able to resolve local hostnames on the network with no problem, however I couldn't connect to the internet. I then set up a split tunnel access list. Since I've set that up, I'm now able to ping internet based addresses (www.google.ca), but no longer able to resolve internal host names. I can ping the ip addresses, just name resolution no longer works.
Searched through conference and still have no resolution.Switch: Cisco SGE 2000..Layer3 mode enabled through console. [code]
View 3 Replies View RelatedMy RV220w has a problem with DNS. I have configured the device for my network, but it seems as though DNS is not working correctly. For a background, I have a primarily Windows environment in my network, W7 PCs. I use homegroup to share files/printers amongst them. I like that I can type "\<server-name> in the Windows search box, and up comes the other computer's files. This functionality is still there with the RV220w, so that's not my issue. My problem arises when attempting to type "<server-name>" into the Remote Desktop Connection dialog box. I can no longer RDP to my other computers by name. Attempting by IP does get me there.
View 11 Replies View RelatedI just purchased an E2500. I have a small home network dominated by Mac and Linux boxes, with an occassional Windows machine. On my previous router I had been running OpenWRT.
One of the nice features of DNSMASQ is that it will do local name resolution from the /etc/hosts file on the router. Is there anyway to turn on similar features in the E2500? I have a NAS box and a networked printer that require local name resolution. I had hoped that I could just create a DHCP reservation for them, and that the router would resolve their names for other hosts on the network. This does not appear to work.
Should I just be boxing this thing up and returning it in favor of a unit I can flash better firmware on to?
Using a 4948E switch with FastEthernet1 as the management interface which uses the VRF mgmtVrf. I cannot get DNS resolution to work for some reason.
I am using code enterprise 15.1-2.SG and here are the relevant config snippets:
ip domain-lookup source-interface FastEthernet1
ip domain-name domain.com
ip name-server 4.2.2.1
[Code].....
I read online there are some commands in a different code that support specifying the VRF along with the name servers, but I don't have those options. All I can do is set the source-interface on the domain-lookup command.
I have been trying to get my 851W to work with DDNS for a long while now. In fact I walked away from the problem in frustration and loaded DD Client on a Linux box until I had time to re-visit this. The folks at Zone Edit were not able to offer much with CLI problems.
When I debug DDHS updates I get to a point where the the router tries to resolve the DDNS update address and fails.So I have a number of questions:
a) Is this error the result of lack of DNS server names written to the config?
b) My WAN interface is a DHCP client to my modem. If the DDNS updater does need to resolve a name, shouldn't the DNS server info be provided by the DHCP process for the WAN interface? How do I ensure that name servers are automatically assigned for the DDNS updater to use?
[Code] ........
I like the ASA 5505 for SMB and Home Offices very much, but I'm missing sadly a DNS Server or at least the ability of the DHCP Server to use static addresses for certain MAC's. In SOHO's the ASA is the only thing always powerded on and often even a Server where a DNS Server could be installed is missing.So is there a chance to see such a feature (DNS Server and/or static DHCP) in the next SW Release? how name resolution in a small LAN can be done without a local DNS Server?
View 3 Replies View RelatedI have set up a remote access ipsec vpn on an asa 5520. I can connect, and ping internal ip addresses, however I cannot ping back out to the internet, nor can the internal network ping the vpn clients and dns resolution internal or external does not work. I am seeing nothing blocked in the logs on the asa.
View 3 Replies View RelatedI'm running a Windows Server 2008 R2 connected via cable to my RV220. The server is hosting several websites running in separate virtual machines. These websites are accessible through a reverse proxy set up on the 2008 R2. In addition the 2008 R2 provides access to storage over Windows file sharing (client backup, file sharing ...). Most of the clients are connected via wireless.My problem is that after some time (~24h) I lose the connection to the services provided by the 2008 R2 server as a result of (host) name resolution has stopped working. This only happens for wireless clients. Wired clients are not affected.To give more details: Network clients connected via wireless can't see clients connected via Ethernet and the network shares are not accessible anymore (even by putting in manually "\hostnameshare", but "\[IP address]share" still works). Being connected via Ethernet the communication between client and server works flawlessly - the server appears immediately on the network device list. The other way around is also not possible: the server can’t see clients connected via wireless. The reverse proxy is still accessible through wireless connection by putting in the IP address, e.g. "http://192.168.1.123/homepage" but "http://hostname/homepage" won't work.A restart of the router will fix things but only for the next couple of hours.
View 4 Replies View RelatedAm not finding the resolution to my infrastucture and getting output drops. Sw1 is connected Sw2 as below stated
Please find the conf:
Sw 2 3750 conf:
interface GigabitEthernet1/0/46
no switchport
ip address 172.16.100.81 255.255.255.248(code )
I have an out of the box configured RV220W and was wondering if it supports local DNS resoltuion for DHCP addresses it issues. I have a few reservations and a custon search domain configured ('local') but it will not resolve a name fromt the terminal using the search domain (see below):
It resolves freenas but not freenas.local.
macbookair:~ brantwinter$ dig freenas
; <<>> DiG 9.8.1-P1 <<>> freenas
;; global options: +cmd
[Code]...
I have instaled free vpn software from logmein hamishe but do not know how to surf internet.
View 1 Replies View Related