Cisco :: 5508 - Host Name Resolution In WLC Or WCS
Jun 4, 2013
With my current setup on the 5508 controller, I don't have the ability to see any name resolution for wireless clients. I'm wondering if there is some way that I can enable this.
The reason I think this should be pretty easy is because if I enable the access point feature of a smart phone (Android or iPhone), when a client connects, it shows the client name on the smartphone. What's different about how a smartphone sees the wireless client and how WLC/WCS sees it?
View 10 Replies
ADVERTISEMENT
Aug 7, 2011
I just purchased an E2500. I have a small home network dominated by Mac and Linux boxes, with an occassional Windows machine. On my previous router I had been running OpenWRT.
One of the nice features of DNSMASQ is that it will do local name resolution from the /etc/hosts file on the router. Is there anyway to turn on similar features in the E2500? I have a NAS box and a networked printer that require local name resolution. I had hoped that I could just create a DHCP reservation for them, and that the router would resolve their names for other hosts on the network. This does not appear to work.
Should I just be boxing this thing up and returning it in favor of a unit I can flash better firmware on to?
View 3 Replies
View Related
Sep 11, 2011
I'm running a Windows Server 2008 R2 connected via cable to my RV220. The server is hosting several websites running in separate virtual machines. These websites are accessible through a reverse proxy set up on the 2008 R2. In addition the 2008 R2 provides access to storage over Windows file sharing (client backup, file sharing ...). Most of the clients are connected via wireless.My problem is that after some time (~24h) I lose the connection to the services provided by the 2008 R2 server as a result of (host) name resolution has stopped working. This only happens for wireless clients. Wired clients are not affected.To give more details: Network clients connected via wireless can't see clients connected via Ethernet and the network shares are not accessible anymore (even by putting in manually "\hostnameshare", but "\[IP address]share" still works). Being connected via Ethernet the communication between client and server works flawlessly - the server appears immediately on the network device list. The other way around is also not possible: the server can’t see clients connected via wireless. The reverse proxy is still accessible through wireless connection by putting in the IP address, e.g. "http://192.168.1.123/homepage" but "http://hostname/homepage" won't work.A restart of the router will fix things but only for the next couple of hours.
View 4 Replies
View Related
Jun 9, 2013
How can i change AP host name for LAP via CLI? I got the error 'command is disabled' when i try to use command 'capwap ap hostname <>'
I try to disconnect LAP from WLC, factory default, clear all private-configure and clear all files in nvram: but not working (still got error). I cannot change via WLC GUI for CAP2602I series. I don't know why.
I checked bug CSCsy17745 but current in use software is fixed.
WLC 5508 with 7.3.101.0
View 6 Replies
View Related
Mar 8, 2012
We have recently implemented a 3rd party certificate for the guest access, currently have a WLC 5508 that has a Vlan directly connected to our DMZ firewall and NATed out. The problem is when I have installed a 3rd party certificate as per the following link URL
The DNS host name that I entered into the DNS Host name section is not resolved. If I remove the DNS name and leave the virtual ip address 1.1.1.1 then it works fine but just comes back with untrusted message.
View 34 Replies
View Related
Oct 9, 2011
I have setup LAG for one of our 5508 controllers and have connected 4 of the 8 ethernet ports to a 4507 switch. After configuring 2 port channels on the switch we are receiving a host flapping error between the port channels and it seems to be causing a serious slowdown on the switch. When I shutdown one of the port channels the error goes away and traffic returns to normal. I have the same configuration at other locations with the only difference being the switches used are 3750G-12S and I do not see the host flapping error. It appears to only be a problem with modular switches.
One other thing of note: I read a Cisco white paper on LAG and it suggested creating the port channels over 2 different modules. For example, put ports G4/24 and G5/24 in port channel 1 and G4/25 and G5/25 in port channel 2. I tried this but I still got the host flapping error.
View 4 Replies
View Related
May 14, 2011
Installed new Router. Web site resolve takes ~ 10 seconds. We are running domain. The local DNS is on 192.168.6.2. When the dns is resolved browsing the website is fast. But after few min it gets slow again.
Running ping from Local PC
Pinging google.com [209.85.229.104] with 32 bytes of data:
Request timed out.
[code].....
View 5 Replies
View Related
May 19, 2011
How to feel about having network devices resolve names? Do you typically do it? No? Why or why not?I feel like I haven't seen it set up a lot, but it could certainly be good for specifying logging hosts and things like that.
View 7 Replies
View Related
Jun 27, 2011
I have a host that can successfully connect to a PIX 515E (7.x OS) via VPN Client; however, I have no IP routing to the LAN from the remote host.The VPN IP pool works finem,The LAN default gateway is the inside interface on the PIX; the network is flat L2 behind it.The default route on the PIX points out; no other routes are defined,The VPN remote host can be pinged from LAN hosts, but the VPN remote host cannot ping any LAN host, not even the PIX inside interface.
View 2 Replies
View Related
May 7, 2012
ASA 5510
Ver 8.2(5)
I have been looking all over the place for the answer of how to allow clients on an IPSEC VPN to ping from host to host.
View 4 Replies
View Related
May 20, 2012
I'm having with my VPN Server on my Cisco 2621xm.
I started by creating a VPN - everything worked great. I assigned the DNS Servers, Domain name, WINS Server so when I connect I'm able to resolve local hostnames on the network with no problem, however I couldn't connect to the internet. I then set up a split tunnel access list. Since I've set that up, I'm now able to ping internet based addresses (www.google.ca), but no longer able to resolve internal host names. I can ping the ip addresses, just name resolution no longer works.
View 1 Replies
View Related
Feb 10, 2011
I'm just wondering if its possible to ping an IPv4 host using the IPv6 host assuming that the NAT64 has already been implemented?
[code]...
View 2 Replies
View Related
Apr 27, 2011
Searched through conference and still have no resolution.Switch: Cisco SGE 2000..Layer3 mode enabled through console. [code]
View 3 Replies
View Related
Sep 23, 2011
My RV220w has a problem with DNS. I have configured the device for my network, but it seems as though DNS is not working correctly. For a background, I have a primarily Windows environment in my network, W7 PCs. I use homegroup to share files/printers amongst them. I like that I can type "\<server-name> in the Windows search box, and up comes the other computer's files. This functionality is still there with the RV220w, so that's not my issue. My problem arises when attempting to type "<server-name>" into the Remote Desktop Connection dialog box. I can no longer RDP to my other computers by name. Attempting by IP does get me there.
View 11 Replies
View Related
Jan 30, 2013
Using a 4948E switch with FastEthernet1 as the management interface which uses the VRF mgmtVrf. I cannot get DNS resolution to work for some reason.
I am using code enterprise 15.1-2.SG and here are the relevant config snippets:
ip domain-lookup source-interface FastEthernet1
ip domain-name domain.com
ip name-server 4.2.2.1
[Code].....
I read online there are some commands in a different code that support specifying the VRF along with the name servers, but I don't have those options. All I can do is set the source-interface on the domain-lookup command.
View 3 Replies
View Related
Feb 11, 2011
I have been trying to get my 851W to work with DDNS for a long while now. In fact I walked away from the problem in frustration and loaded DD Client on a Linux box until I had time to re-visit this. The folks at Zone Edit were not able to offer much with CLI problems.
When I debug DDHS updates I get to a point where the the router tries to resolve the DDNS update address and fails.So I have a number of questions:
a) Is this error the result of lack of DNS server names written to the config?
b) My WAN interface is a DHCP client to my modem. If the DDNS updater does need to resolve a name, shouldn't the DNS server info be provided by the DHCP process for the WAN interface? How do I ensure that name servers are automatically assigned for the DDNS updater to use?
[Code] ........
View 1 Replies
View Related
Mar 30, 2011
I like the ASA 5505 for SMB and Home Offices very much, but I'm missing sadly a DNS Server or at least the ability of the DHCP Server to use static addresses for certain MAC's. In SOHO's the ASA is the only thing always powerded on and often even a Server where a DNS Server could be installed is missing.So is there a chance to see such a feature (DNS Server and/or static DHCP) in the next SW Release? how name resolution in a small LAN can be done without a local DNS Server?
View 3 Replies
View Related
Jun 27, 2011
I have set up a remote access ipsec vpn on an asa 5520. I can connect, and ping internal ip addresses, however I cannot ping back out to the internet, nor can the internal network ping the vpn clients and dns resolution internal or external does not work. I am seeing nothing blocked in the logs on the asa.
View 3 Replies
View Related
Sep 28, 2011
Am not finding the resolution to my infrastucture and getting output drops. Sw1 is connected Sw2 as below stated
Please find the conf:
Sw 2 3750 conf:
interface GigabitEthernet1/0/46
no switchport
ip address 172.16.100.81 255.255.255.248(code )
View 5 Replies
View Related
Sep 17, 2012
I have an out of the box configured RV220W and was wondering if it supports local DNS resoltuion for DHCP addresses it issues. I have a few reservations and a custon search domain configured ('local') but it will not resolve a name fromt the terminal using the search domain (see below):
It resolves freenas but not freenas.local.
macbookair:~ brantwinter$ dig freenas
; <<>> DiG 9.8.1-P1 <<>> freenas
;; global options: +cmd
[Code]...
View 3 Replies
View Related
Jan 9, 2012
I want to stream/surf YouTube videos frm my wifi to my tablet in 720P resolution.Can I get away with a cheap wifi router OR I have to buy an expensive unit?
Belkin N300 OR Linksys E1500.
Linksys recommends E2500 for streaming multimedia but I will be browsing via youtube, so still it affects me OR I can go ahead with E1500 ?
View 2 Replies
View Related
Oct 31, 2012
I am learning to write ACL's along with a billion other Cisco things. The internet is not clear on how to do this exactly. At least in my research.
I have two host on the same subnet and I want to block all except RDP TCP port 3389 from one host to another.
I want to apply that Access-group to a switchport interface on my 3750 that belongs to the computer I want to protect from the other.
Host A: 10.1.1.10/24 -- I need to block all TCP and UDP traffic except for port 3389tcp
Host B: 10.1.1.60/24 -- I need to allow only TCP port 3389 from Host A to this one.
This is on the same switch so I can use an extended ACL like 101 or whatever.
This is almost starting to make sense to me but im still weak on extended ACL. I got basics down pretty well.
View 3 Replies
View Related
Jun 30, 2012
I'm going through the CCNA training and I'm setting up my DHCP server on my 871 router. I have my cable modem into the WAN port on my router and have 1 host plugged directly into Fastethernet 1. I can ping any IP I want from the IOS prompt but I only have local access from the host. [code]
View 4 Replies
View Related
Aug 26, 2012
I tried to ping from the "online host" PC to the outside,it succeeded. However, I can't ping from outside to the "online host" PC.
View 2 Replies
View Related
Jan 25, 2013
I'm receiving a lot of logs on my FW about host cannot receive correct IP address and get APIPA addresses (169.254.x.x).
Is there a way to locate them on network? From my core switch i cannot see them
View 9 Replies
View Related
Apr 24, 2012
I test all devices using ping command, from ASA to router was fine (on both interface) but not to Host , and host to router was fine, but only on directly interface(F1/0), and to ASA was not success. am i miss something in my configuration?
View 5 Replies
View Related
Jul 6, 2011
configure my Cisco ASA5510 (asa version 8.3.1) so that one of the host (e.g.192.168.8.20) behind management interface can ping to the other host (e.g. 192.168.2.246) behind OUTSIDEinterface. I tried modifying the ACLs, NATs and ICMP statement, but still failed[CODE]
View 19 Replies
View Related
Mar 22, 2011
I have 2 web servers that replicate between them (two different internal ip). My idea is that if one of them will not work, the other to do the relay.I have a Cisco ASA 5505 I can do a nat for each machine. How should I set ?
View 3 Replies
View Related
Jan 12, 2012
I want to create a VPN between two PC's, (the server "Data" and "Remote Desktop" check the topology below), the Router Clabeck (cisco 2811 ) is connected to the internet through int f0/0 using a PPPoE connection and connects all the LAN PC's by PAT to the internet (you can see all the configurations in the Show Run below), the "Remote Desktop" is any PC with internet connection.
F0/1 F0/0
DATA--------------------SW-------------------ROUTER(Cisco 2811)---------------------INTERNET---------------REMOTE DESKTOP
192.168.1.51 192.168.1.254 201.122.53.177 192.168.1.1
Current configuration : 2116 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
[code]....
View 1 Replies
View Related
May 13, 2012
Based on the configuration pasted below, we believe the host (10.0.2.200 / 255.255.255.0 GW: 10.0.2.1 with external DNS servers configured) should have access to the web. However, it cannot resolve any names nor can it connect outside.
[code]....
View 19 Replies
View Related
Apr 4, 2011
I would like to have implementation of two ASA 5520 (in failover). Architecture Context
-The ASA are used as VPN concentrator only.In a first time ASA will be in charge to take in charge VPN IPSec Host-to-LAN connexion (with the IPSec VPN client) and I think VPN SSL anyconnect client will be setup in a near futur.
-We must define two categories of users (student and researcher), for each one we want define :
+ An IP address pool
+ ACL
+ Split Tunneling (only LAN traffic will go in the VPN tunnel)
-The ASA will perform authentification via RADIUS server (the radius server is linked with a LDAP server)
+ In the RADIUS server we want define the category of user (each one user is a student or a researcher)
-The VPN clients use the internal DNS to request LAN ressources.
-A timeout of the VPN if no traffic during 60 minutes
-The VPN user perform authentification with PSK (no certificate)
the RADIUS server software is IETF compatible (url...)The architecture is the following :
-One internet connexion
-A corporate firewall with 3 DMZ :
+ 1 DMZ Public ; which is connected the ASA "outside" interface (encrypted traffic)
+ 1 DMZ Private ; which is connected the ASA "inside" interface (uncrypted traffic)
+ 1 DMZ LAN ; there is some VLANs routed by 6500 routers.
-On the LAN there is the radius servers
-On the corporate firewall :
+The https and ipsec will be opened between the internet and the ASA
+The RADIUS traffic between ASA and the radius servers and the traffic between the pool VPN users and the LAN.
-What is the best solution to configure the ASA?
View 1 Replies
View Related
Jul 6, 2011
Ive been going over some exam questions and i got a question regarding diskless host. i have dont some googling but cannot find a overview explanation.
View 4 Replies
View Related
Jan 16, 2012
I am trying to find a way to find the netid and hostid of any given ip address, given any ip address, I know the left side the IP address is the netid and the right side of the ip address is the host id but I am pretty sure there is more to it than that.
View 1 Replies
View Related
