E3000-RM Router With USB Storage For Large HDD?
Sep 13, 2011
I am looking at two wireless routers currently
ASUS RT-N16
Linksys E3000-RM
Does either of them support large HDD. I have an external 4-bay RAID 5 enclosure (4.5 TB usable space) I would like to connect through USB to the router and host the files on it.i can't find any data from either router if they can support this so I thought I would ask.
View 2 Replies
ADVERTISEMENT
May 8, 2011
E3000 can see only 1TB Maximum. I have a 3TB WD storage and E3000. I have upgraded also to latest E3000 firmware version.
View 3 Replies
View Related
Sep 18, 2011
On the main floor I have a Linksys E3000, hooked up to my ADSL modem along with laptop #1 which has all my video and photos on Picasa. Laptop is on 5ghz, running speed at 300. I'm running the E3000 in dual mode (running 2.4ghz and 5ghz at the same time.) I have 2 different network names mjames5gz and mjames24gz.
In my basement, I have a laptop running on 5ghz and an IP camera running 2.4 ghz. the signal in the basement is on the low side for both. Under Wireless network connection, I am getting around 100 on Speed vs.300 on the laptop.... The basement is fully finished so I can't run cables to the basement easily. What could I buy so I can stream videos from laptop to laptop on 5ghz. Would also be nice to have the 2.4ghz signal boosted as well
When I go upstairs, both laptop read 300 ghz and I can stream between them just fine.
View 3 Replies
View Related
Feb 16, 2012
I have a Maxtor 160Gb external HDD and want to use it as a network drive.So I go to the routers login page and choose for storage to set it up. I did this once and because I wanted to change a few things I deleted the share and changed the users and usergroup that I've made.Now I can't created a share anymore, also tried another disk(flashdrive) nothing seems to work.The only thing I didn't do is reset to factory default, but that's the last thing I want to do.I use the E3000 router with firmware 1.0.04
View 2 Replies
View Related
Dec 6, 2011
I have Linksys e3000 , I used the web interface to set up the storage. I also from the Administration option of the Storage inside Web Interface changed the netbios name or Device name to the one I like. Now the name does not resolve to the ip address. It used to when I had recently unpacked. I can still access my drive by IP address.
View 3 Replies
View Related
Jan 9, 2011
I am very pleased with my purchase of the E3000 so far. However, one function seems to allude me. One of the main reasons for purchasing this router was because of its Media Server functionality. I wanted to be able to stream to my UPnP devices (ps3, xbox360, etc) without having to keep my power hog of a PC running. I have set up the HD using the Storage tab of the Advanced Router Settings, and created several Shares on the Media Server tab. The good news is that I am able to access the share on my PS3. The bad news is that I can't on my Xbox360s. As the Xbox360s has built in wireless N, I would really like to be able to stream to that system.
View 8 Replies
View Related
Feb 17, 2012
I updated to Firmware Version: 1.0.04. And now I can't logon to the router when my storage device is turned on. However, I can logon to the router when the device is off. If I turn the power on the storage device and try to navigate the router it says ".....Can't establish a connection to the server at 192.168.1.1." Then I have to reboot the router to be able to log back on.
View 3 Replies
View Related
Mar 13, 2013
It's been a while since I sent into my router and messed with any of the Storage setting. I recently decided to change things around so I recently went in the router and attempted to access the Storage page but all I get is a blank page with this address http://192.168.1.1/storage/Disk_Management.asp.
View 4 Replies
View Related
May 29, 2010
I have connected my LaCie rugged drive to the router and would like to use it as backup storage and as a way to stream video to my PS3.When I go to my advanced settings for the router and go to the storage heading I can see my LaCie and its specifications. There is a button next to it that says "claim", which I press, but nothing happens.I don't have the option to create a shared folder, and I can't access the drive from my Mac.On a somewhat related note, I've enabled the media server and can find it on my PS3, but there is nothing in the root folders. How do I put stuff (movies, music,etc.) into these root folders?
View 7 Replies
View Related
May 4, 2011
when an external hd is connected to the e3000 via usb, that i can read and write to it, but i cannot delete files from the external drive? i have been trying to figure this out for a while and cannot delete files after i write them.
View 3 Replies
View Related
May 7, 2011
I'm setting up a large rambler house with a large footprint, and the only broadband connections are at opposing points of the house. Right now, I'm using two Linksys WRT54GS routers running Tomato in a WDS setup. A router, positioned in the middle point of the house, acts as a wireless access point so that the computer on the far end of the house can pickup the wireless signal. (One WRT54GS on its own doesn't have the power to go all the way across the house.)
I would like simplify things with a single, hi-power, hi-speed router at one end of the house. I know I can get better speeds with Draft N routers, but I need more signal strength as well. Are there any products currently available that can perform much better than my WRT54GS routers right now?
I need to go about 125 feet, through a number of walls.
View 11 Replies
View Related
Jul 1, 2011
Is it possible to have 2 hard drives connected to a WRT610N perhaps connected through a USB hub?
View 1 Replies
View Related
Jul 29, 2012
I updated my E3200 to 1.0.04 to try to resolve a wireless dropping issue. Now the connected USB storage no longer responds correctly (very delayed if connecting at all). When I try to provision new storage via the routers admin page, I do not get the permissions page.
View 9 Replies
View Related
Aug 9, 2012
I got a refurbished EA4500 (directly from Cisco) last week. I have been having a few issues, which I have found (not too great) workarounds for. However, the latest issue has me stumped, and is unacceptable.Whenever I am transferring files between 2 computers, I get kind of OK speed (5 MB/s). However, while this transfer happens, no other device can connect to the net. Actually, even trying to go to router home page (192.168.1.1) times out.The clients still say they are connected to the router, but I just can't get anywhere.As soon as the file transfer finishes, everything goes back to normal.EA4500 replaced a WRT54G. Never had any problems with that router. It was such a workhorse. Just needed to upgrade to a n-router.I am on the latest non-cloud firmware.I have reduced the MTU size to 1200. Not sure that matters.
View 9 Replies
View Related
Mar 28, 2012
My WRT610N media server is not serving up large, MKV files (>1GB). I have a 500 GB Maxtor connected with external power.The media server serves smaller files just fine (although they are not MKV files). The disk is formatted as NTFS. I can access the large, MKV files via mapping network drive, so I know they are present on the disk and they are intact; but they media server does not show them.
View 1 Replies
View Related
Nov 20, 2012
we are currently using a modem router LINKSYS WAG120N Wireless-N ADSL Router but are not satisfied. lots of dead zones and I think that there are too many users for this AP. last count gave around 20 users. so I'm looking for a solution to be able to handle 20+ concurrent connections and with large coverage - 600 m² .
View 7 Replies
View Related
Feb 5, 2012
We have a D-Link DIR655 wireless router on our network. I have purchased two Seagate 1TB network storage units and would like to have one for me and one for my wife. It seems that the router will not support two, because they try to access the same port. How can I plug these two storage units to the router and have access for each of us to one device?
View 2 Replies
View Related
Aug 5, 2011
Now that the firmware update allows us to plug a printer into the E4200, is there anyway to simultaneously enjoy network storage AND a USB printer?
View 1 Replies
View Related
Feb 13, 2013
I have the N900 model and would like to connect a hard drive via usb. The router can see the external hard drive but the problem I run into is the HD uses a password to open it.
View 7 Replies
View Related
Jul 3, 2012
I have a 1TB Western Digital drive connected to my home EA4500 router. Connecting to media server using SMB protocol (192.168.1.1) works fine. I am moving abroad for an extended amount of time, though, so I would also like to connect to this USB drive using FTP. Using the new Cisco Connect Cloud interface, I have enabled FTP sharing for the USB storage device with port 21 and using standard UTF-8 encoding. Whenever I try to connect to the FTP server using my router login credentials, I get the following error message:"There was a problem connecting to the server xx.xxx.xxx.xx. This file server will not allow any additional users to log on. Try to connect again later"
View 9 Replies
View Related
Aug 21, 2012
When I connect my WD My Book Essential 3TB (which is listed as officially compatible with the E4200), I get the following screen:
The E4200 does not detect my hard drive, nor is there a bar saying "detecting".
My problem started when I could not create any new folders through finder. I had to store new files in the root folder. Every time I entered the admin password, I got a message saying I did not have sufficient permission to perform such a task. I then went on to create a new user within the admin group and continued getting the same message. Finally, I formatted the drive directly through my computer and reconnected. And now my HDD is not detected at all.
I have an iMac running OS X Lion. The HDD is question has been formatted to Mac OS extended (journaled).
View 2 Replies
View Related
Apr 28, 2013
I have an e4200v2 with latest firmware. I have changed the administrator password from "admin" to a password of my own.I have recently added a USB hard drive to the router, and it says that admin password to access the share drive is the same as the admin password as the router, but it is not. The password to acces the USB drive is "admin" and there is nowhere to change this password to something secure.
View 5 Replies
View Related
Mar 26, 2012
I am using Window 7 and the WRT610N router. I got a bufflao 1 TB USB harddisk connected to the router.My PC can access to the Harddisk. However, but my pc showing the USB harddisk is full. I checked, there are less than 200GB file on the disk. why is that?
View 1 Replies
View Related
Jul 17, 2011
I have my WRT350N setup. all computers within my LAN can access my usb storage device. I can not access my usb storage device using a computer outside my LAN.
if you log on to 99.225.89.229:8080 it will ask you for user id and pass word to log into my router.
if you try to log on to 99.225.89.229:21 it wont even connect asking you for a user id and password.
my guess is the router is not allowing port 21 to be accessed, but I'm not sure.
View 2 Replies
View Related
Aug 27, 2011
I've rolled back my E4200 router to the old firmware 1.0.0.1, then set up a media server.It generally works (e.g. it streams pre-existing media files to other devices). I can copy to this external drive small (say, < 1 MB) files. The drive has enough free space. However, I cannot copy to this external drive large (e.g. 700 MB) files.
View 5 Replies
View Related
May 3, 2011
My setup is as follows:
Linksys E2500 as DHCP client, all default network settings (MTU auto configured to 1500), connected to:
ZTE 831 II ADSL2+ modem in bridged mode
The issue is that whenever any large file is downloaded over HTTP, the download stops after about 4 minutes and never resumes. This results in:
1) HTTP downloads of anything > ~80 MB failing; tried using several browsers and CURL, all with the same results
2) iOS downloads in iTunes timing out
3) YouTube videos stalling every few minutes
Interestingly, Netflix streaming works OK. Perhaps that's because the protocol for Netflix is not a single large download but a bunch of smaller ones, but that's conjecture.
This all occurs over both wireless and wired connections to the E2500.
If I connect my Mac directly to the ZTE modem, I don't have the problem.
View 8 Replies
View Related
Apr 7, 2012
I recently upgraded my internet speed service from my ISP (Brighthouse). They installed a gateway to replace their old modem, but I have had it bridged so it should act as a modem. Speedtest.net shows downloads on the order of 40-50 Mbps and uploads around 5 Mbps. If I try doing something interactively that pushes the speed and size of files (like flying over Google earth using my mouse to guide the direction and speed) my connection seems to hang. I have to reset the router (unpower and repower it) to get my internet connection to work. This has also happened when I quickly downloaded a series of large images - I click to get the next page fairly soon after the current page has finished downloaded. My router is a WRT350N.
View 6 Replies
View Related
Mar 26, 2013
I have TV set box connected to modem router supplied by ISP provider. To the same router I connected EA 4500 to which I wired connected Network Hard Disc at which I store music, photos and films, which I can not access via TV set box. If I connect Hard Disc direct to the modem router to which set box is connected, access works fine.
Whar shall I do to establish accesability of Network Hard Disc over all network ?
View 1 Replies
View Related
Mar 13, 2012
My router usb storege was working fine with my old videos and streaming fine too but now im putting some new videos on the usb storage my router its not showing the new videos on the usb storage.
View 2 Replies
View Related
Jan 11, 2012
I got E4200 with latest firmware (updated two days ago) and WD Studion with 2 Tb drive (it is HFS+ file system)Once I connect this drive to router I am not longer available to access 192.168.1.1.
View 5 Replies
View Related
Mar 4, 2012
I am uable to access my files on the USB Storage Device connected to WRT610. Its configured properly. I can see the drive on my network. When I double click it asks for password which I enter and it takes me to the shared folder. But when I click it it says Not Accessible....You donot have the persmission. FTP works fine.I have noticed that on the disk page in the Shared Folder Area when you click on the Summary, the box with Groups With Access is Empty. Whereas on the FTP area in the same summary it clearly mentions the admin group.I have tried every thing including factory reset, hard reset, using new group, new user name etc..The technician from Linsys even spent an hour on my computer and ultimately he gave up and gave me number to contact technical support.
View 1 Replies
View Related
Dec 27, 2011
Just bought router and installed. I cannot create share in Storage settings in Advanced settings. I hit Create Share and it brings up the dialog box where I enter the display name. Share entire partition is checked already. I save settings and I see the box going to the form where you assign the Group roles, but then the box disappears and closes. All I see is the original Storage setting page with the Create Share button still there.I tried this on Win 7 using both IE8 and Chrome browsers.
View 4 Replies
View Related
May 29, 2012
The USB storage drive is not found when I attempt to map the drive on my Mac Mini Lion OS, it is not found. My question is, does the wrt160nl storage feature work with Mac OS? I have upgraded firmware to 1.0.0.3 and latest version of Lion
View 2 Replies
View Related