I can't find a way to enable UPnP or anything like it on my Motorola model 3360. I play online with my new xbox 360 and I have constant connection issues because it tells me my UPnP isn't enabled. I know my router isn't the problem because the problem continues even when my xbox is directly connected to the modem.
View 5 RepliesI recently got a Motorola NVG510 (from AT&T, they changed our internet plan and sent a new router) and since then I've had problems with Skype. I think I've narrowed the problem down to there being no upnp on this router to enable, and Skype doesn't like that.So, is there any way I can make this option available, or some other way to 'simulate' upnp so Skype will play nice? I read somewhere else that "IP Passthrough" may be an option, but I'm unsure about that.
View 1 Replies View RelatedI am having trouble identifying exactly with Modem/Router I have. The only Numbers I see is the FCC #, Serial Number and a WEP access Number.
View 3 Replies View RelatedHow to enable UPnP?
View 2 Replies View Relatedi currently usin mio router model 2701 HGV-E , may i knw does this model have UPNP function?? my com internet can go in , but when i try connect usin my ps3 , it said UPNP is not available. i use ps3 internet connection test all successed only the UPNP not available.
View 1 Replies View RelatedI have successfully installed ClearOS 6.3.0 at home and I need to enable UPNP for gamming, XBOX and Bittorrent.
View 1 Replies View RelatedI'm trying to stream music files to my A/V system. After weeks of encountering problems, I discovered that UPnP was disabled (by default) on the router. After enabling UPnP on the router, bingo......it worked. My A/V system has a Yamaha A/V receiver, which is a networking receiver capable of net radio and accessing/playing files on my PC. Net radio works fine. The problem I'm having is that when I shut down the A/V receiver, turn it back on, I can't access the files. I have to disable UPnP, save changes, and then reenable UPnP, save changes. When I do that, all is well and my receiver "sees" my PC and files. Shut down the receiver, turn it back on, back to square one and have to do the do the disable/enable routine again. PC is WinXP, using Windows Media Player 11. Seems the "enable" UPnP desn't "stick", even though it shows enabled on the setup page.
View 6 Replies View RelatedHow to enable UPNP on CISCO routers - 36XX , How can I simualte UPNP connections.
View 2 Replies View RelatedI have a BEFSR41v3 and am trying to enable UPnP on the router. However, after I activate UPnP in my browser and the webpage reloads (after the common status screen that says you have to wait 5 seconds and you will be redirected). I am prompted for a password. But for some reason, it will not accept any password that I enter. In order to even get to the settings to UPnP in the first place, you must enter the correct password to access the settings. So I believe I am using the correct password, so why is it not accepting the correct password? I have had to reset my router to factory default settings (by pressing and holding the reset button for 30 seconds) multiple times because of this. But each time after enabling UPnP it will not accept the default password of admin nor will it accept any password that I assign it afterwards. I have noticed however that the "Filter Internal NAT Redirection" which should be set to enabled by default has been set to disabled even after I have reset the router. I have activated UPnP on the router before without trouble but have had to reset the router to factory default settings afterwards because of other reasons.
View 9 Replies View Relatedi am having 2950 switch. Now i login through telnet but as per the company standard i have to login through ssh. Is there any possible to enable the SSH in 2950. Any IOS supporting this operation.
flash:/c2950-i6q4l2-mz.121-19.EA1c.bin
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP : Cable TV provider
It seems there is a bug with TL-WDR3600. As it can be seen in the following image, the UPnP is off:But my firewall on the computer is reporting flood of packets originating from the router (it's the routers MAC address and IP address):I don't know what ETH type packet is, 0026 might be hex (38 decimal as seen in the raw log). But port 1900 is definitely UPnP.At the router, the wireless switch is off, as well as all other options for sharing etc. This computer is the only one connected to the router. The router has been reset several times.
i got new vostro 3360 and i do not find the ethernet controller. its say "
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
To find a driver for this device, click Update Driver."
I have a problem with bluetooth on my Dell Vostro 3360,
Symptoms: The notebook can't find bluetooth devices and bluetooth devices can't find the notebook.Additionally, trying to turn off the BT adapter from context menu or from mobility center does not work as well.when trying to turn off the BT adapter via Bluetooth settings.
I get an error saying "the following settings were not saved: discovery settings" (attached image)
Things I already tried:Tried updating the drivers, didn't work.
Checked BIOS settings - BT was ON.
OS: Windows 7 64-bit
I have a new Dell Vostro 3360 with a Dell Wireless 1703 802.11b/g/n (2.4GHz) card. No internet access (wireless) from my home (other notebooks work perfect). LAN works fine. I have a AVM Fritz!Box 7360SL router at home.
On the other hand, wireless internet works fine at my lab (here : 802.11g, unsecured hotspot). Installed latest drivers and did even a clean re-installation (Windows 7 ultimate or professional) - problem remained.
Unable to find required driver for Wi-Fi adapter. There is an unknown network controller in the Device Manager, but no drivers for it.
[code]....
I am using the Vostro 3360 with win 7, I did used the hotspot station software accomplish with the WiFi driver before and worked fine. However, the hotspot is not working as the ipv4 is showing 'no internet connect'. And my iPhone cannot connect it too.
View 1 Replies View RelatedCan I associate the non-root bridge model 1310 to the root bridge model 1400? Is there any problems on the configuration I need to be aware of?
View 7 Replies View RelatedUPnP seems to be failing somewhere between a few hours and a few days. It will work as expected for a while after starting or restarting the router, but then trying to create any new UPnP mappings will fail, and the ones that have been already created usually stop working. The commandline client upnpc fails to locate the router automatically, and manually navigating to http://192.168.0.1:65530/rootDesc.xml in Chrome returns a connection reset error instead of the expected XML device description.I turned on debug messages in the logs, but there doesn't seem to be anything useful in there (though they also seem to be flooded with a bunch of IPv6 mDNS network hopping, so I'm going to try disabling that for a while and see if that works). I did update to 2.10 and still had the same issue with UPnP, however my wireless network kept going down (I guess a known issue) so I downgraded back to 2.07. After the downgrade, I reset the router and manually re-entered all my settings (i.e. I didn't import them).
View 14 Replies View RelatedI have a DIR-655 router and I'm trying to set up Screens Connect which states I need NAT-PMP or UPnP IGDv1 on my router.. I can't find out for sure where it says it does or doesn't though I was under the impression that it did.When I load up Screens Connect though it says 'Port mapping unavailable. Check network or router settings" I dno if the fact that I find no specific mention of these features means the router predates them so it's not mentioned.
View 2 Replies View RelatedNeed to port forward certain ports for one computer but need UPnP for 2 different ps3's.These are the parts I have. I have read that the GT704WGB does not have a true bridge mode. I don't want to bias anyone however. How to best use this equipment so that I can port forward ports on my laptop. There are also several laptops, desktop and phones on my network but the 2 ps3's and my laptop are what primarily concern me.
-Actiontec GT704WGB for Verizon DSL (Modem / Router Combo)
-Actiontec Support GT704WGB Wireless DSL Gateway for Verizon High Speed Internet access
Cisco Linksys wrt54gs v4 (Router) currently running Tomato firmware but I can flash dd-wrt back to it in a second.
Is it possible to transmit Audio and Video wirelessly with UPNP. Let say I would like to watch youtube videos or any movies that is streaming live on my PC in my room on my TV (with UPNP).
View 1 Replies View RelatedI just bought Air Video for the ipad, It needs support for the UPnP or NAT-PMP protocols, so does the wireless n do set this up automatically or do you have to manually configure the router, and if so how.
View 1 Replies View RelatedI have a DCS-930L network camera that I configured from its Web-based interface. In SETUP | Network Setup, I have disabled both UPnP and UPnP Port Forwarding. In my router's (Netgear WNDR3700) settings, I reserved the local IP address, 192.168.1.80, for the DCS-930L. In the DCS-930L I assigned the network camera HTTP Port 8000; therefore, I can access the DCS-930L on the LAN from [url].... In addition, in the router, I have forwarded port 8000 to the local IP address, 192.168.1.80, so I can access the DCS-930L from outside the LAN.I can access the DCS-930L both from within the LAN and outside of the LAN.
However, even though UPnP and UPnP Port Forwarding in the DCS-930L are disabled, the DCS-930L keeps adding and deleting UPnP NAT rules in the router. In addition, a system at the IP address, 207.232.83.172, keeps attempting to access the DCS-930L from different ports. I traced the IP address, 207.232.83.172, to the ISP, Telekenex, in Los Angeles, California. A partial log from the router is below.[code]...
I just set up the x2000 at my home Everything seems to be working fine. However, when trying to connect my play station 3. I get upnp not available when I run the internet connection test. With that, i am not able to connect to Modern Warfare 3 online. Haven't tried other games yet but i sign in to the play station network without any problems.
I have Upnp enabled on my router. I have tried port range forwarding and DMZ settings to my ps3. and still not working.
I try to start with UPNP in my LAN network. Everyting works if I use Wifi connection but does not for wire connections. All tests suggest that router block UPNP traffic. Of course my WAG 200G in managment menu is for UPNP enabled. ex. downgrade firmware or something like this?
View 2 Replies View RelatedMy Dlink DIR-655 is hardware ver B1 and firmware 2.00. I found the UPNP cannot cross between wired and wireless network. It is fine if both UPnP server and renderor are on either network. There is no problem on other protocol, such as SAMBA from my notebook connected via Wireless to the QNAP NAS connected via Wired to the 655.
View 9 Replies View RelatedI am unable to make UPnP to work on the RV220W. I am forced to use port forwarding.
View 10 Replies View RelatedI am going to update my Windows Small Business Sercer 2003 to 2011.I currently have an ASA 5505 with the IPS installed on it. I am reviewing the migration procedures from Microsoft. Within the procedure it asks if the firewall or router supports UPnP. Does my ASA 5505/IPS support UPnP?
View 2 Replies View RelatedWe require UPnP (mainly for an in-house built FTP Server app that uses UPnP to dynamically open/close ports for Passive FTP mode) and have found it's implementation in the SA540 is unreliable. Sometimes UPnP works after a reboot, sometimes it doesn't. When it does work after a reboot it will eventually stop working. Going into the web GUI and turning UPnP off and back on always fixes for a while.
Is this a known issue with the SA500 Series routers? We had an RV220W deployed first, but it's UPnP implementation was even more unreliable. That said, it seems that the latest Beta firmware version for the RV220W has fixed the issue. Could it be that the same fix needs to be applied to the SA540?I was planning on opening a cause with the CSBC at some point like I did with the RV220W, but I'd rather not spent the time doing so if the this is a known issue.
I have been unable to get the UPnP function to operate on this router. Box has been checked and saved several times with no results. Ports cannot be opened maunally as well. I have been through every page looking for something that was missed, along with the sparse documentation instructions to no avail.
UPnP and port forwarding worked fine on the residental E3000 router that this replaced. I thought this was an upgrade, but it is seeming like a downgrade now.
I posted this on a previous thread along with another question, but since I marked that as answered I'll post it here so people will see it.Is there any way I can use UPnP WITHOUT having to have the videos I want to stream in my WMP library? Windows Media Player has always been a pain for me, from my videos not showing up in the library when I know they're there to not being able to switch audio streams in a video. (If VLC Media Player or iTunes had a UPnP library.
View 3 Replies View RelatedHow do I change the UPnP setting on my router?
View 2 Replies View RelatedI have a wireless router and I'm trying to user UPnP feature. of course it is enble in the router.
It's working one and after it stop working, looks like the router is not responding anymore. If I got on the web interface of the router, I loging, on the first web page I press save changes, even if I didn't change anything, the UPnP feature work again.
Looks like a timeout occure or something like that. Is there a way to wake up the router without having to go on the web interface? Why it's stop working?
Firmware Version: v4.30.15