Getting Yellow Exclamation Point On Wireless?
Jul 6, 2012
My internet just keeps dropping every 15 minutes or so. I never really have a problem, but for the past week or so I have been having this issue.I don't think it is just wireless though, because my xbox live connection keeps dropping too and that is wired into my router.
If I right click on my connection and click "Status", this is what I get.
IPv4 Connectivity: Internet
IPv6 Connectivity: No network access
I have unplugged my router and modem at least 10 times. I don't know what else to do.
View 19 Replies
ADVERTISEMENT
Aug 20, 2012
I can't connect to the internet using our wireless router. The signal is excellent but there's a yellow triangle with an exclamation point. It says that there is limited access. I tried resetting the router, checked all the plugs, restarted my laptop., all to no avail. I tried connecting using my phone, and I can go online so the problem lies with my laptop.
I checked my device manager and under Networks, the 6TO4 adapters has a yellow triangle with exclamation point. With a code 10 error. I tried to run 'check for solutions" but I can't connect to the internet. Using my phone, I saw websites dealing with the same problem. I uninstalled all the 6TO4 adapters along with the isatap adapter because it also has the same problem except that it's reporting error 31. Then I restarted my laptop.I can connect to the internet but only through LAN. I still can't connect through my wifi. I tried to reinstall the 6TO4 and isatap but it still shows the same message.
View 11 Replies
View Related
Apr 11, 2011
I've been having a kind of weird situation with a laptop here at the house. Once in awhile it will decide it doesn't want to connect to our router. No matter what I do (system restore, restart the computer, disable/reenable the network adapter, rollback driver, reinstall driver, etc) it won't fix it. What does fix it is connecting to my neighbor's unsecured network, then reconnecting to my router. It's an easy fix but I am puzzled as to why it behaves like this? Another thing that may or may not be related is when I go into Device Manager and Network Adapters, there were two ISATAP adapters with a yellow exclamation point over them. I ran a fix from Microsoft that said it reinstalled the drivers, but when I go into Device Manager the problem ISATAP adapters (two of them) are no longer listed. I'll see if this solves the random connection loss and inability to reconnect issue.
View 1 Replies
View Related
Nov 19, 2012
My laptop, which is a gateway, not sure which type but it's relatively new. just a few years old maybe 5 at the max? idk tbh. Anyways when my mom first gave it to me it had an internet problem. Said limited connectivity and would not connect. Someone told me to restart the computer and the internet magically started working again. It didn't work this time.
View 4 Replies
View Related
Jul 11, 2012
Just bought a new Cisco e1200 router last week. When i first hooked it up, it was giving me extremely low (significantly lower than my old router) downloading speeds. After switching the networking mode from "mixed' to "Wireless-G only", the speeds went back to normal. I tried "Wireless-N only", but it didn't work after that. Seemingly, my computer does not work with Wirless-N?
It's been running okay now, but 2 things happen occasionally: When playing a game, I experience lag for a period of 5 minutes, or sometimes 20 minutes. It goes away on its own. Never happened with my old router. When surfing the internet, pages will refuse to load. The connection bars shown at the bottom right hand corner of my computer display a yellow triangle with an exclamation point. This goes away on its own after about 4-5 minutes. These problems come randomly every 3-4 or days, maybe a bit longer.
View 4 Replies
View Related
Oct 19, 2011
My Desktop (Win 7) and laptop (Acer Aspire 4830T) were talking both ways (after I fixed a Teredo Tunnel problem!) but have now degraded to the point where I cannot setup a Homegroup.The main issue is that although my wireless internet works when I am home (D-Link DIR-615 router), as soon as I leave, I get the dreaded Yellow exclamation on both Virgin Trains and my client's Unsecured wifi (with password protection). These did use to work in July. Can't detect an event when started to go wrong, though could blame Windows Update! Did try System Restore but these keep failing. Using Kaspersky.
[code]....
View 15 Replies
View Related
Apr 8, 2013
My wireless internet goes off and on. The yellow exclamation comes up. It last for several seconds and then does it again if I try to load several web pages at once. When I run the diagnostics, Windows says it "fixed" that the Default Gateway was not available. Is there something on my laptop that I need to change as far as settings are concerned because it works some of the time but not all of the time. It seems to stop working when I try loading youtube videos.
View 14 Replies
View Related
Feb 23, 2013
I updated my graphics card driver and when I rebooted, the wireless wasn't working. I went into device manager, and all the network adapters listed there had a yellow exclamation mark beside them. Attempts to disable/enable and uninstall/reinstall haven't worked. I'm at a total loss. I've tried system restore but it failed, and I've tried reinstalling the graphics card driver update, but that hasn't worked either.
View 1 Replies
View Related
Nov 27, 2011
I tried to plug in the internet cable in my laptop i kept getting that yellow triangle with an exclamation mark on it (down in the right). i kept plug in and out the cable until i got connected. i use a cable/dsl router, having 2 computers connected in the same time. only mine gave this error, as the other ran perfectly in the meantime. what seems to be the problem? a virus/trojan?
View 1 Replies
View Related
Feb 3, 2013
my router is sitecom gigabit 300N. since the past week there is this yellow exclamation mark on the connection in the task bar, near the clock. if I pass the mouse over it, it says no internet connection, eventhough I'm connected to the internet and I'm writing this right now, this is on desktop pc and connected to router by cable. the same thing on my laptop that is connected through WiFi, the signal strenght is normal, but there is the same exclamation mark. I'm pretty sure its the router not the PC because this happens on two different machines with the same router. I tried turning the router off and left it that way for about 7 minutes but that didnt work. is there something in settings I should do? or throw it away and buy Linksys/D-link router?
View 6 Replies
View Related
Sep 16, 2012
I have a exclamation point and no Internet access over my connection. Ever time I move the mouse the swirly thing is moving like something is trying to load. I have reset the windsock. I have restored to an earlier date. I have tried in safe mode with metworking. I have tried with all firewalls off (windows and mcaffe). The router seems fine because all our devices r running off of it. I tried to connect with the computer wirelessly and that doesn't work.
View 1 Replies
View Related
Apr 16, 2013
I need to know if 3502p with outdoor antennas supports Point-to-Point Wireless Bridging?
View 6 Replies
View Related
Feb 27, 2013
How would I bridge a wireless connection with a distance of 400 feet? Would twoAP1262N-A-K9 be able to make this happen? Or is there another wireless bridge that you all can think of?I would be connecting one AP1262 of off a 3750g switch and at the far end (400 ft aproximately) another AP1262N-A-K9.
View 12 Replies
View Related
Jan 24, 2011
sm bus controller has come up with an exclamation point how do i fix this
View 1 Replies
View Related
Mar 2, 2013
I have the M2N32-SLI Deluxe/Wireless Edition motherboard with onboard wireless. I built this computer myself. I did a fresh install of Windows 7. I installed the wireless drivers from the asus website by putting them onto a flash drive from my laptop and installing them on my desktop.On my wireless signal, I get the yellow triangle with a ! in the middle. Nothing else has been installed. I am at a loss of what to do to get rid of this and just get my wireless to work. We have 3 other laptops and one other desktop that work fine with no issues, but this one desktop seems to have problems.
View 10 Replies
View Related
Jan 30, 2013
We are using some desktops as static ip wired and laptops using automaic ip wireless, issue is that in wireless sinal shows yellow marks on laptops no internet but actually getting internet.
View 1 Replies
View Related
Nov 16, 2012
I am getting a small yellow icon in my wireless settings that suggests that there is no internet connectivity even when I do have the internet. It comes when i disable and enable the wireless adapter or when its left idle. My ipconfig and DNS settings are fine.
[code]....
View 6 Replies
View Related
May 29, 2012
my computer, my network connections icon have a exclamation mark (!) and it say i don't have internet access,but luckily i have internet access but i can't remote my computer,
View 4 Replies
View Related
May 19, 2011
Ok BEFSR81 (192.168.1.1) is connected to the Modem. I have a cable from one of the BEFSR81's LAN ports going to WRT54G (192.168.2.1) WAN port. My computer is connected to the BEFSR81. I can not access the setup page (http;//192.168.2.1) from my computer, maybe I am not suppossed to be able to do that. The Laptop sees a Linksys wireless connection, but there is a yellow exclamation point over it.
View 7 Replies
View Related
Jan 30, 2013
in some laptops wireless signal showing yellow mark no internet, but we are getting internet
View 1 Replies
View Related
Feb 11, 2011
I have a Compaq Presario V3016US Notebook PC. It has Windows XP Home Edition.So onto the problem. If I plug in the Ethernet cord, or try to connect to the Internet wireless,nothing gets picked up.I went into device manager, as I have seen many of you asking whether there is any "Yellow Exclamation" marks, and I found three under the Network Adapters.
View 14 Replies
View Related
Aug 18, 2011
I'm having problem with the router WRT54G2, My laptop - winodws 7- connetcs to the wireless.Then it asks me if I wanna configure the router I saw yes, I give a name to the wireless connection and a password, everything works and come to the end, after that I connect to my wireless connection and a little yellow triangle appears -down right on the signal bar. I resetted the router already and update the firmware.Still won't work. I thought maybe I need to put a static IP but I won't find the DSN Code.
View 1 Replies
View Related
Apr 10, 2013
I have a problem with three AIR-LAP1131AG-E-K9 that joined the controller and the status led turns to yellow after joining the controller while other LEDs are blinking green.The APs has no coverage at all although the WCS shows that there is coverage and the 4400WLC shows that the AP interfaces are UP. (The ethernet interface and tha 802.11b,g radio interface is up).The SSID broadcast is enabled.On the switch the interface is up and there is traffic going in and out of the LAP.I tired power reset and factory reset for the APs but the problem remains the same.
View 2 Replies
View Related
Aug 23, 2012
My EA4500 is not working. The power indicator light is on but the green and yellow lights on the Internet port are not flashing and the modem the EA4500 is connected to show no activity on that port. Also, the EA4500 is not broadcasting so I can't even connect to it to use Cisco Connect to troubleshoot. I tried resetting it but it did nothing. This has happened before but is usally fixed with a reset.
View 8 Replies
View Related
Dec 12, 2012
I am using the cisco linksys E1200 WiFi router. when ever I connect my laptop to WiFi, its show Limited connectivity/Yellow Caution sign when connected.
I try to reconfigre it & also in factory default mode it show same.
View 1 Replies
View Related
Jul 8, 2012
I just recently bought a linksys E900 wireless-N300 Router. I installed the software on the disc and followed the on screen instructions. When I attempt to use an ethernet cable as I did with my last router, it won't work. I get that yellow triangle icon indicating no internet access. I tried using a wireless hub to connect wirelessly...I connect, but no internet access. My PC knows its there, suggests that I reset the modem, doesn't work.
View 8 Replies
View Related
Feb 6, 2013
I have several E4200 routers deployed in our library district. In one branch, we have been having sporadic problems with computers not being able to maintain a connection. Typically the computer will connect and then the connection will drop and Windows will display the yellow error triangle on the wifi signal strength display.I have swapped the router with another brand new E4200 with the latest firmware but am still having this problem.
View 6 Replies
View Related
Apr 24, 2011
how is the 1130 point-to-point bridge work in lighteight mode ?
Is this supported on 5508 and on new 2500 series controllers?
How does the WCS manage the point-to-point link?
I am aware that there is Lightweight software for the 1300 series bridges but never used one so far
View 6 Replies
View Related
Apr 24, 2011
Configure 1310 point-to-point bridge (AIR-BRI1310G-A-K9-R)
View 3 Replies
View Related
Mar 16, 2013
I have two Cisco AP 1242G and i'm trying to configurate a Point-to-Point Bridge Configuration to connect two wired LAN. Figure 1.8 [URL] I would connect two wired networks.
I tryed two configurations: Root and Non-Root AP. This way every wired PC on the Root AP can connect to the Access points, but cannot connect to the wired PC on the Non-Root AP.AP and WGB. Even this way the wired computers on one AP cannot connect to the wired PC on the WGB. This way only the wireless client can connect to the wired network. This is my network:
Root Bridge Non Root Bridge
10.0.0.1 10.0.0.2
Wired clients on the RB Wired clients on the Non RB
10.0.0.100 10.0.0.200
View 4 Replies
View Related
Oct 14, 2012
Is any one can configure basic Point-toPoint wireless bridge. I need to connect two simple LAN with Cisco Aironet1310 AP. I required basic configuration with basic authentication between these two devices which is on IOS "123-8.JEA3".
View 16 Replies
View Related
Feb 1, 2011
This is the first outside bridge I have ever attempted. These radios are 2000 feet apart, pointed at one another. The first radio has a cat 5 (with POE) to a Windstream 2Wire wireless router.
The other radio has 3 RadioLabs AP's (with POE) connected to it. I have followed the installation guide for the GS200 ( Here) to no avail. I must have missed something but don't know what.
View 2 Replies
View Related
Jan 22, 2011
I can find and connect to the wireless network in our house, but it has the yellow triangle with an exclamation mark. My housemates are on the internet fine on their laptops and my xbox live is working, so it's clearly an issue with my laptop. My laptop's internet evidently works with an ethernet cable too, but I can't just go through an ethernet cable all the time since the router is in a housemate's bedroom.
View 14 Replies
View Related
