Cannot Connect To Internet - Exclamation Point Over Connection
Sep 16, 2012
I have a exclamation point and no Internet access over my connection. Ever time I move the mouse the swirly thing is moving like something is trying to load. I have reset the windsock. I have restored to an earlier date. I have tried in safe mode with metworking. I have tried with all firewalls off (windows and mcaffe). The router seems fine because all our devices r running off of it. I tried to connect with the computer wirelessly and that doesn't work.
View 1 Replies
ADVERTISEMENT
Jul 11, 2012
Just bought a new Cisco e1200 router last week. When i first hooked it up, it was giving me extremely low (significantly lower than my old router) downloading speeds. After switching the networking mode from "mixed' to "Wireless-G only", the speeds went back to normal. I tried "Wireless-N only", but it didn't work after that. Seemingly, my computer does not work with Wirless-N?
It's been running okay now, but 2 things happen occasionally: When playing a game, I experience lag for a period of 5 minutes, or sometimes 20 minutes. It goes away on its own. Never happened with my old router. When surfing the internet, pages will refuse to load. The connection bars shown at the bottom right hand corner of my computer display a yellow triangle with an exclamation point. This goes away on its own after about 4-5 minutes. These problems come randomly every 3-4 or days, maybe a bit longer.
View 4 Replies
View Related
Aug 20, 2012
I can't connect to the internet using our wireless router. The signal is excellent but there's a yellow triangle with an exclamation point. It says that there is limited access. I tried resetting the router, checked all the plugs, restarted my laptop., all to no avail. I tried connecting using my phone, and I can go online so the problem lies with my laptop.
I checked my device manager and under Networks, the 6TO4 adapters has a yellow triangle with exclamation point. With a code 10 error. I tried to run 'check for solutions" but I can't connect to the internet. Using my phone, I saw websites dealing with the same problem. I uninstalled all the 6TO4 adapters along with the isatap adapter because it also has the same problem except that it's reporting error 31. Then I restarted my laptop.I can connect to the internet but only through LAN. I still can't connect through my wifi. I tried to reinstall the 6TO4 and isatap but it still shows the same message.
View 11 Replies
View Related
Jul 6, 2012
My internet just keeps dropping every 15 minutes or so. I never really have a problem, but for the past week or so I have been having this issue.I don't think it is just wireless though, because my xbox live connection keeps dropping too and that is wired into my router.
If I right click on my connection and click "Status", this is what I get.
IPv4 Connectivity: Internet
IPv6 Connectivity: No network access
I have unplugged my router and modem at least 10 times. I don't know what else to do.
View 19 Replies
View Related
Apr 11, 2011
I've been having a kind of weird situation with a laptop here at the house. Once in awhile it will decide it doesn't want to connect to our router. No matter what I do (system restore, restart the computer, disable/reenable the network adapter, rollback driver, reinstall driver, etc) it won't fix it. What does fix it is connecting to my neighbor's unsecured network, then reconnecting to my router. It's an easy fix but I am puzzled as to why it behaves like this? Another thing that may or may not be related is when I go into Device Manager and Network Adapters, there were two ISATAP adapters with a yellow exclamation point over them. I ran a fix from Microsoft that said it reinstalled the drivers, but when I go into Device Manager the problem ISATAP adapters (two of them) are no longer listed. I'll see if this solves the random connection loss and inability to reconnect issue.
View 1 Replies
View Related
Nov 19, 2012
My laptop, which is a gateway, not sure which type but it's relatively new. just a few years old maybe 5 at the max? idk tbh. Anyways when my mom first gave it to me it had an internet problem. Said limited connectivity and would not connect. Someone told me to restart the computer and the internet magically started working again. It didn't work this time.
View 4 Replies
View Related
Aug 18, 2011
I have a new notebook Sony Z217GG, I connected WAP 4400N was very smooth, but after connected WAP 4410N, the internet connecting always connect and disconnect, I check the notebook wireless model is intel 6230.
View 1 Replies
View Related
Oct 19, 2011
My Desktop (Win 7) and laptop (Acer Aspire 4830T) were talking both ways (after I fixed a Teredo Tunnel problem!) but have now degraded to the point where I cannot setup a Homegroup.The main issue is that although my wireless internet works when I am home (D-Link DIR-615 router), as soon as I leave, I get the dreaded Yellow exclamation on both Virgin Trains and my client's Unsecured wifi (with password protection). These did use to work in July. Can't detect an event when started to go wrong, though could blame Windows Update! Did try System Restore but these keep failing. Using Kaspersky.
[code]....
View 15 Replies
View Related
Feb 3, 2013
my router is sitecom gigabit 300N. since the past week there is this yellow exclamation mark on the connection in the task bar, near the clock. if I pass the mouse over it, it says no internet connection, eventhough I'm connected to the internet and I'm writing this right now, this is on desktop pc and connected to router by cable. the same thing on my laptop that is connected through WiFi, the signal strenght is normal, but there is the same exclamation mark. I'm pretty sure its the router not the PC because this happens on two different machines with the same router. I tried turning the router off and left it that way for about 7 minutes but that didnt work. is there something in settings I should do? or throw it away and buy Linksys/D-link router?
View 6 Replies
View Related
Apr 24, 2011
I have a Windows XP SP3 desktop with a NetGear WG111v2 USB wireless adapter and I get my internet connection from my Blackberry 8320 (I connect my BBerry device to my PC and start Blackberry Desktop Manager and choose to use internet access of my phone for my PC). I want to be able to make this internet connection available to other devices on the network wirelesly. I also have a nook ebook reader and a laptop which I would occassionaly like to connect to internet via the connection described above. How to go about making Blackberry internet connection shared accross the network? I tried Internet Connection Sharing Wizard, but I ended up with nothing to show up for.
View 3 Replies
View Related
Mar 17, 2013
To extend my wired ethernet I have purchased a WAP300N access point and connected it according to the instructions. I can see the AP from a wireless client and connect, but no IP number is provided to the client. The AP is connected to a router which has a DHCP server via wired connection (though a switch). The AP does it self get an IP number from the router but does not pass through DHCP requests from the clients.Occasionally an IP number is provided, but then there is no route to the LAN or the WAN on the other side of the AP.I have tried a whole lot of things to make it work (and been in the internet chat for two hours with a Linksys supporter, who could not make it work either).I have tried to set the IP number in the AP to static.I have tried to remove security (has to be WPA2 eventually, but for the sake of testing it has been removed)I have tried to factory resetI have tried to reinstall the firmware (the same version as the factory installed)etc.
View 4 Replies
View Related
Aug 26, 2012
The detected problem is the connection between my access point, router, or cable modem and the Internet is broken.The network gateway is accessible, but Windows couldn't receive network traffic from the Internet.All other devices (iPad, Xbox, android phone) have no problem connecting to the Internet.Desktop is the only one experiencing the connection issue.
View 1 Replies
View Related
Jan 31, 2012
My laptop died last week and have been using my husbands, which I hate! We had some issues with computer freezing on some webpages or after being on webpages for awhile (like facebook). Yesterday it froze and I could not get it back on. When he got home he did scan disk (which I also did) and got it working after going into safe mode and doing system restore. He said an update had gotten through and messed things up. Anyhow, after he was on it a few hours last night, we lost connection. I figured the crazy weather was the culprit but it has been off all day. Our router is working and connecting but the adapter is not. Also our home phone says there is no line. We have unplugged everything several times, checked to make sure everything is in the right spots, I have even reset the router and rebooted the adapter. I uninstalled and restalled the adapter also. It is now telling me that "the connection between your access point, router, or cable modem and the Internet is broken". The only lights I have on the adapter are power, battery, DS and now the US light is blinking. The online and link lights are not on.
View 3 Replies
View Related
Sep 22, 2012
How we connect two different access point to each other
View 1 Replies
View Related
Sep 28, 2012
I want to use my PC for internet access in my office (shed)Shed does not have phone line or cable points.PC does not have wireless capability.Moile phone can be used as Access Point (but PC can't detect it- no wireless capability)What is the methods to provide plug-in/ bolt-on wireless capability for my PC so that it can use my mobile Access Point to connect to the internet?
View 2 Replies
View Related
Jul 11, 2012
I reset the wap610N,after establishing connection, my iphone see my network domain but does not connect. I heard of dual band setting,how do i go about that. What must i do to establish connection with the iphone.
View 4 Replies
View Related
Dec 26, 2012
How do I connect my wireless access point router to the internet so that I may use my ipad?
View 2 Replies
View Related
Jul 4, 2011
At home I have a wireless access point that I use to connect my laptop #1 to the Internet. On laptop #1 IP address is set to 193.49.21.65. This IP address also Subnet Mask and other addresses are given by my Internet Service Provider. Everything works just fine but lately I bought another laptop (laptop #2) and now my aim is to connect both laptops to the Internet. Unfortunately, I can't make that happen. Only one of my laptops having IP 193.49.21.65 set can connect to the Internet.
[URL]
So is there any way to have an Internet connection on both of my laptops without having to buy any new equipment?
View 1 Replies
View Related
May 1, 2013
I have a point to point 100mb line connecting SG500x switches at 2 locations, with these ports in a vlan together. I use layer 3 on the SG500x's to route between the two sites. I also have RIP protocol enabled to allow for automatic failover if the point to point fails (this works well).
I upgraded the ios to 1.30.59, and the connection now runs at a fraction of the speed. I have hard-coded the ports to run at 100mb full duplex, but I still only get around 12mb of throughput between the switches. I used to get about 90mb before. The provider also hard-coded the circuit to 100mb full duplex. The provider has checked the circuit remotely, and everything looks fine. I tested with a laptop at each side, and did get almost 70mb throughput. I would think this indicates some type of setting mismatch, but i cannot find anything.
I am using a backup vpn for now as some things look flaky as well (on vpn, I can use the web interface to access the SG500x on the opposite side, but on the point to point I cannot - I can ping the device though).
I have seen some references on here to shutting off STP on these 2 ports.
View 3 Replies
View Related
Sep 11, 2012
recently i just connected a non cisco ip phone(from panasonic) to Cisco 2960 POE switch at site A. The PABX system is located at site B,Site A and site B are connected using MetroE Point to point.I would like to apply QoS for voice vlan. I want to assign 2MB to the point to point connection for voice vlan.
View 3 Replies
View Related
Sep 4, 2012
I would to realize an point to point connection in L2TPv3 with a bandwidth pass through of 1 Gb. Which routers/switches I can use?
View 3 Replies
View Related
Jul 14, 2011
We have a point to point connection going from a regional office to the main office this is provided by a Service Provider. In our office we have an ISP and what we need to prevent from happening is that if the internet drops from the ISP we could somehow re-direct the internet traffic through this point to point connection and make it so that our Internet connection is pulled from the main office. is it just a matter of re-configuring?
View 5 Replies
View Related
Feb 28, 2012
We have two locations 10 miles apart and need connectivity between them. A local provider can run a 30MB fiber connection between the 2 sites at a very reasonable cost. We would have to provide the routers however. I have worked with Cisco routers before with T1 channelized connections but am unsure how the the fiber would connect to a Cisco router in this scenerio. I need to know how such a connection to the routers at each end would take place, specifically what WIC or whatever else would be needed. I currently have a 1760 router at each site but realize that they are old and I m,ay have to replace them with newer models.
View 11 Replies
View Related
Jan 24, 2011
sm bus controller has come up with an exclamation point how do i fix this
View 1 Replies
View Related
Apr 8, 2013
My wireless internet goes off and on. The yellow exclamation comes up. It last for several seconds and then does it again if I try to load several web pages at once. When I run the diagnostics, Windows says it "fixed" that the Default Gateway was not available. Is there something on my laptop that I need to change as far as settings are concerned because it works some of the time but not all of the time. It seems to stop working when I try loading youtube videos.
View 14 Replies
View Related
Feb 23, 2013
I updated my graphics card driver and when I rebooted, the wireless wasn't working. I went into device manager, and all the network adapters listed there had a yellow exclamation mark beside them. Attempts to disable/enable and uninstall/reinstall haven't worked. I'm at a total loss. I've tried system restore but it failed, and I've tried reinstalling the graphics card driver update, but that hasn't worked either.
View 1 Replies
View Related
Nov 27, 2011
I tried to plug in the internet cable in my laptop i kept getting that yellow triangle with an exclamation mark on it (down in the right). i kept plug in and out the cable until i got connected. i use a cable/dsl router, having 2 computers connected in the same time. only mine gave this error, as the other ran perfectly in the meantime. what seems to be the problem? a virus/trojan?
View 1 Replies
View Related
May 29, 2012
my computer, my network connections icon have a exclamation mark (!) and it say i don't have internet access,but luckily i have internet access but i can't remote my computer,
View 4 Replies
View Related
Feb 15, 2012
I have 2 data centers miles apart. They are on a Paetec MPLS. I have a Lightower point to point Ethernet link between the two data centers as well. At data center A, I have a Paetec managed router (192.168.2.1). The subnets behind that router are 192.168.2.0, 192.168.100.0 and 192.168.101.0. I also have a Cisco 1841 that is configured with fa0 addressed as 192.168.2.250 and fa1 as 10.5.5.1. Fa1 is the one end of the point to point Ethernet link to data center B.At data center B, I have a Paetec managed router (10.0.2.1). The subnets behind that router are 10.0.2.0, 10.0.100.0 and 10.0.101.0. I also have a Cisco 1841 that is configured with fa0 addressed as 10.0.2.250 and fa1 as 10.5.5.2.What I want to happen is any traffic headed from data center A destined for 10.0.100.0 or 10.0.101.0 to be routed through the point to point Ethernet link. I had Paetec add routes in their managed router to route any traffic headed for 10.0.100.0 and 10.0.101.0 to my Cisco 1841 (192.168.2.250).I wanted to do the same for traffic destined for 192.168.100.0 and 192.168.101.0 from data center B. Paetec added the appropriate routes to the router at data center B.Now, if I trace from data center A to 10.0.100.45, I see this:
1 <1 ms <1 ms <1 ms 192.168.2.1
2 <1 ms <1 ms <1 ms 192.168.2.250
3 4 ms 4 ms 4 ms 10.5.5.2
4 3 ms 3 ms 3 ms 10.0.2.1
So the routing seems to be ok. However after it hits 10.0.2.1, it gets lost after that.Am I missing something? Is this a misconfiguration on Paetec’s routers?
View 1 Replies
View Related
Nov 1, 2012
How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.
View 1 Replies
View Related
Apr 25, 2011
I've got a AP WAP54G. I've managed to get into the configuration page and rename my router and set a WPA2-Personl password.
The issue I'm facing is that when me and my roomate try to connect to the router at the same time, it shows the laptop that connects second as one that has 'limited connectivity' and hence cannot use the internet. The 1st laptop however works fine!
The settings for the router have all been left to default.
I'm not sure, but does this problem have anything to do with the fact that the router in configured with a static IP. If so, then there is another issure which is that whenever I try to change it from static to automatic/dynamic IP, the page fails and the router doesn't even get connected to the configuraion page(192.168.1.245) after that. The only way to get that page again is the reset the router.
Also I'm not able to directly get into the config page when I connect my router to my laptop via lan. I need to change the LAN IP to 192.168.1.x where x is >1.
View 3 Replies
View Related
Apr 22, 2011
Have an Inspiron 1150 laptop & have excellent wireless connection. Can receive email but IE will not connect. It connected fine in the past but I upgraded files and now it will not. I went to IE 8 but managed to remove it back to IE 6 but still no connection.
View 1 Replies
View Related
Oct 7, 2011
I have a Network with about 5 computers. All computers have internet connection except for this one PC. It says that i am connected but only on LAN. When i try to browse the internet, it says im not connected..
[code]...
View 14 Replies
View Related
