I want to use my PC for internet access in my office (shed)Shed does not have phone line or cable points.PC does not have wireless capability.Moile phone can be used as Access Point (but PC can't detect it- no wireless capability)What is the methods to provide plug-in/ bolt-on wireless capability for my PC so that it can use my mobile Access Point to connect to the internet?
View 2 RepliesWhat's the best design and configuration to deploy some fixed access points (wired) and others on a mobile truck (no wired)?I was thinking about configure the Wireless network using Mesh, but could not find much information about the convergence time when MAP (access point on the mobile truck) finds a better RAP signal, not sure if the clients would keep the conection up when the MAP converge.The customer have 11 3502e access points and 1 2504 WLC.Found out that 3502e does not support autonomous mode, so can not use autonomous bridge mode that has some mobile station configuration available.
View 5 Replies View RelatedI have installed 4 of these units in a commercial premises offering free wifi. Since the day they were installed (5Months ago) we had connectivity issues with mobile devices. This was somewhat resolved in the latest FW 1.0.04 but we are still having random disconnections on the units every 2 - 4 days and have to reboot the units. Lately the units have become unresponsive and reset themselves back to factory settings.
What we have done so far:
Changed router models - No change
Changed from Static IPs & DHCP - No change
Turned on isolation - No change
Performed a wifi analysis to pick the best channel for each unit - Slight signal gain but still disconnects
Changed to 20Mhz only (And all other variations) - No change
I think I am left with no option but to return these for some other brand. I'm really regretting buying these units at the minute...
How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.
View 1 Replies View RelatedHow we connect two different access point to each other
View 1 Replies View RelatedHow do I connect my wireless access point router to the internet so that I may use my ipad?
View 2 Replies View RelatedAt home I have a wireless access point that I use to connect my laptop #1 to the Internet. On laptop #1 IP address is set to 193.49.21.65. This IP address also Subnet Mask and other addresses are given by my Internet Service Provider. Everything works just fine but lately I bought another laptop (laptop #2) and now my aim is to connect both laptops to the Internet. Unfortunately, I can't make that happen. Only one of my laptops having IP 193.49.21.65 set can connect to the Internet.
[URL]
So is there any way to have an Internet connection on both of my laptops without having to buy any new equipment?
I've got a AP WAP54G. I've managed to get into the configuration page and rename my router and set a WPA2-Personl password.
The issue I'm facing is that when me and my roomate try to connect to the router at the same time, it shows the laptop that connects second as one that has 'limited connectivity' and hence cannot use the internet. The 1st laptop however works fine!
The settings for the router have all been left to default.
I'm not sure, but does this problem have anything to do with the fact that the router in configured with a static IP. If so, then there is another issure which is that whenever I try to change it from static to automatic/dynamic IP, the page fails and the router doesn't even get connected to the configuraion page(192.168.1.245) after that. The only way to get that page again is the reset the router.
Also I'm not able to directly get into the config page when I connect my router to my laptop via lan. I need to change the LAN IP to 192.168.1.x where x is >1.
I have a new notebook Sony Z217GG, I connected WAP 4400N was very smooth, but after connected WAP 4410N, the internet connecting always connect and disconnect, I check the notebook wireless model is intel 6230.
View 1 Replies View RelatedI'm using a WRT120N and have had no problems connecting most wireless devices, but a Nintendo DS and DSi owned by my family are unable to connect to the access point. My wireless security mode is disabled, network mode is set to mixed, SSID is the same as on the DS/DSi, Channel width is 20Mhz only, Standard channel is set to 6, but I tried using channel 1 and 11 without success, SSID broadcast is enabled.
I've tried every work-about I could find and always get the 51300 error code, and am at a loss as to what else I can try to get the devices to connect to the access point.
I Cannot access internet from mobile after connecting to the Wi-Fi but can access internet from PC connecting via cable[CODE]
View 19 Replies View Relatedhow i cannot connect moblie to my computer
View 1 Replies View Relatedi can be prompted or connected through my mobile broadband connection but i can't access to the internet,what's wrong?...is it some settings?
View 1 Replies View RelatedI have a WLC 4402 on my network. Recently mobile phones can connect to the wireless network and obtain a valid IP address. This IP is pingable from a workstation anywhere else on the network. However, these phones will not display web pages. They come up page cannot be displayed. I even tried putting Google's IP address in the phone's browser and it still did not display. I can connect through the same WLAN via a laptop or iPad. These devices have no problem displaying web pages. I even went ahead and created a new TESTWLAN with no encyption but to no avail. Same results: laptops connect and display web pages and smart phones connect, gain IP but do not display web pages. Comes up page cannot be displayed. This matters not whether its an iPhone or Android platform.
View 8 Replies View Relatedi am having LAN connection to my laptop with registered in main data base, so i can't use my mobile using a same username to WiFi.Bluetooth/ USB connection between Laptop lan Internet to my Samsung Galaxy i551 android 2.2 mobile, so that i can access internet in my mobile without WiFi registration.
View 5 Replies View RelatedI am no longer able to connect to wireless internet. I use the free internet from the shop downstairs, I had permission to use it as does the rest of the house.The strange thing is that since my Wifi went down yesterday, I have noticed its also disabled on my smart phone too.The notification says that there is limited or no connectivity and a normal repair only prompts that my PC cannot renew its IP address So I tried to renew and re list the IP setting, flush the DNS, recatalogue etc and still no joy. I have re installed my PCi adapter twice and even used a different card, pulled them out and cleaned the PCi slot...basic housekeeping
An ipconfig command at the command line shows that the IP address isnt your standard 192.168. xx type ...(its something like 165.0.01)...the subnet is normal 255.255.xx A look at the status window in attempt to manually input an IP address instead of the automatic function shows that there is no default gateway...just the odd IP address found when I did ipconfig.Ive also tried a winsock repair..no joy..also I have checked the services.msc and made sure all the relative services are enabled and automatically set.An attempt to connect to a different network ( my smart phones 3g hotspot and also my neighbors wifi) both were successful...so I dont see the problem to be with my PCi adapter......but then again I dont think its the shops router either, as both of my housemates can use the internet on their phones??..they are not tech savvy at all and would defiantly remember if they had recently changed anything or lost the service...usually its me who has to set up their computers or smartphones and they would be banging on my door if they lost the service also!Im unsure if a wrong WPA 2 key would show up as a "limited or no connectivity" notification??..surely it would just say that the key was wrong?
i have alcatel one touch and it wont conect to the internet
View 1 Replies View RelatedHow to connect internet using wifi from mobile phone
View 5 Replies View RelatedHow to connect to internet using Wi-Fi from Nokia X2-00 mobile phone?
View 1 Replies View RelatedCan i connect my android mobile for internet by using internet from laptop.
View 1 Replies View RelatedI have Samsung WiFi enabled phone,,can i connect it with my systems' wired internet connection..
View 1 Replies View RelatedHow to connect to internet using wifi from mobile phone?
View 1 Replies View RelatedI have a laptop but i live in an apartment where there are Wi-FI signal but they are only reachable when i put my laptop on my window ,but I have a mobile with Wifi and it can hack some wifi which are un secured ?how can i connect to internet on my laptop using my mobile wifi !
View 1 Replies View Relatedi want to connect wifi in my mobile phone.........they say it has a password,,,,,,,
View 1 Replies View RelatedI'm working on a project in which we have to transfer our mobile phone calls via internet and our mobile should be connected to pc via bluetooth. This is pretty easy at dialer's end but how to recieve the call via internet on some pc and direct it to the reciever via bluetooth.
View 2 Replies View RelatedConnect to internet on my mobile samsung galaxy y GT s5360
View 1 Replies View RelatedRegion : Canada
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120608
ISP : Distributel
I've just installed this router today, connected physically 2 PCs, a PS3 and a VoIP and everything works fine !
The problem is with the WIFI connection ! my devices see the WIFI network, they connect, but I cannot connect to the internet ...
What settings Should I turn on/off or any config I should tweak ?
I need to know if 3502p with outdoor antennas supports Point-to-Point Wireless Bridging?
View 6 Replies View RelatedI have two SSIDs on an Autonomous Access Point, that goes to a 2960 switch, that connects to a L3 3560. I have a vlan for admin/private internal access that uses the native vlan (1) and guest vlan (50). I have configured both and I am trying to get both to go out the same Internet connection.
I cannot get the guest access to access the Internet. It looks like my computer will go, but it just comes up saying no Internet access.All interfaces are trunking this vlan properly. I can communicate from the laptop to the 3560 but I just can't get to the Internet.
I'm having some difficulties with the VLAN setup on the SG-200 and the WiFi access point. The access point (a TP-Link WA801N) is only able to access the internet when it is plugged into a port that is on the default VLAN (PVID 1). If I plug it into one of the other VLANs then any clients connected to the WiFi lose access to the internet and cannot access devices on the VLAN. I have previously used this setup with a first generation Cisco WAP4410N. [code]
View 4 Replies View RelatedI've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
View 3 Replies View RelatedHow would I bridge a wireless connection with a distance of 400 feet? Would twoAP1262N-A-K9 be able to make this happen? Or is there another wireless bridge that you all can think of?I would be connecting one AP1262 of off a 3750g switch and at the far end (400 ft aproximately) another AP1262N-A-K9.
View 12 Replies View RelatedI just bought an LG Bluray DVD player (BD390) which is unable to find the access point in my home network.My router is a WRT54G, ver. 2.2, running firmware: Ver.4.21.1. My home network uses high speed cable with two computers on the wireless network, all working with no problems.The router is on the second floor but the two computers and the new BD390 are on the first floor - about 35 feet away. I have the wirelss security set to none and use only the specific computer MAC addresses to allow connection to this network.
I found directions in the forum for a setup using the LG BD390 but with a different Linksys router. I changed the security to WPA (AES); the Beacon interval from 100 to 75; the Fragmentation Threshold from 2346 to 2304; and the RTS Threshold from 2347 to 2307. The DVD wireless connection still failed to find my network. There is a "Push button" connection feature on the BD390 setup which I tried, but the only "button" on the router I could find was in the basic wireless setting, a green icon for the wireless SSID setup. No connection was made there either.
The recommendation connection from the LG manual is for a network cable, but that would be over 50 feet and a real pain to connect, so I would prefer WiFi.