How To Configure Laptop With Wireless Network
Sep 8, 2012My laptop has windows xp.my home has wireless network.how can i configure to my labtop with wireless network?
View 4 Replies
ADVERTISEMENT
Linksys Wireless Router :: WRT54G - Not Connecting To Laptop While Making Network Secure Laptop
Sep 5, 2008I have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies View RelatedHow To Configure Wifi In My Laptop
Apr 5, 2012Windows XP is installed in my laptop. It shows windows counterfeiting issue and popup the message whenever I open the laptop. If I use internet through wire, it works fine but Wi-Fi is not connected in my system. It also doesn’t show WPA2-PSK option for network authentication.how to configure Wi-Fi in my laptop.
View 2 Replies View RelatedWindows 7 Laptop With Atheros AR9285 Network Card Can't Connect To Wireless Network?
Aug 21, 2012This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View RelatedConfigure An Internet Port For A Laptop?
Jan 26, 2012how do i configure a laptop internet port. cos anytime i plug a cable to browse i dont get internet service?
View 1 Replies View RelatedUse Windows To Configure Wireless Network?
Jan 6, 2012I can not find the option "Use windows to configure wireless network."
This is what I have done so far:
Control Panel> Network and Internet Connection> Network Connections> Right-click Wireless Network Connection> Properties and a window with two headings opens: General and Advance. There is no "Use windows to configure wireless network" option.
Configure Wireless Network Using Router?
Aug 25, 2011I want to know how to configure a wireless network using an wireless router???
View 1 Replies View RelatedConfigure 2 NICs On Vista Laptop With A Router
Dec 2, 2012Following is my Hardware
Router: 3Com OfficeConnect ADSL Wireless 11G firewall
Laptop: Lenovo 3000 N200 - Vista
Built in NIC: Intel PRO/Wireless 3945BG
USB NIC: Linksys Compact Wireless G
I am trying to connect my Laptop to Media Player HDD connected via Ethernet to Router. I want to channel traffic to/fro HDD separately from that of internet to/fro laptop (to make it faster - my assumption)
I have successfully done this by using the router as a switch when I had a cable modem. But now I have an ADSL connection to internet and my internet gets kicked off while I connect these using VLAN.
What I want is best possible configuration of my hardware to access internet and play/transfer media files on my laptop
Configure Hp Window Vista Laptop To Router?
Nov 5, 2011How can I configure my hp window vista laptop to router?
View 4 Replies View RelatedWireless :: How To Configure Network For Cyber Cafe
Mar 22, 2011Networking and troubleshooting windows problem.
View 2 Replies View RelatedHow To Configure Wlan Settings In HP Laptop With Window 7 Ultimate
Apr 24, 2012i recently bought a hp 1219 model laptop with windows 7 ultimate...but i am not able to start wifi connections..i guess there is some installations for wifi drivers to make but when i tried it is not getting installed too.
View 1 Replies View RelatedConfigure Wifi On Laptop Sony Mini In Window 7?
Jul 12, 2012how to configure WiFi on laptop Sony mini in window 7
View 2 Replies View RelatedCisco Wireless :: Wap200 Can Seen As Wifi Network But Cannot Configure It
Aug 21, 2011Network set up; wireless router (D-link DIR825) to Cisco switch (SD208p) and have Wap200 hooked to cisco switch to extend range up one floor. Can see it as wireless network, but cannot configure it with web browser. Address 192.168.1.245 just times out via pings as well. Have done all resets, power on reset, etc nothing.
View 3 Replies View RelatedCisco Wireless :: Configure A Wired Guest Network With A Combination Of 5508 And 2504 Wireless Controllers?
Apr 7, 2013Is there any way to configure a wired guest network with a combination of 5508 and 2504 wireless controllers? I am aware that the 2504 does not have wired guest functionality, however is it possible to set up a wired guest on the 5508 and using mobility anchors, transmit the l2 information through eoip to communicate with the remote vlan?Home built NAC solution, using 802.1x authentication on switchports for public areas. If user is an employee, communicates with the supplicant on their machine, and places them on an internal vlan.If user is a guest, user fails 802.1x check and is placed on a "guest" vlan with an ACL and external DNS.If placed on the guest vlan, the user has to accept a terms of use form.This is working currently with our 5508s without any issue, however we have some remote offices we'd like to roll this out to that are using 2504 controllers. I'm hoping there's a way that I can use the 5508 as an anchor or vice versa to make this work.
View 1 Replies View RelatedWireless :: Configure Local Area Network With Unbounded Media?
Feb 6, 2012How do I configure a local area net work with unbounded media?
View 1 Replies View RelatedD-Link DIR-655 :: Configure To Join Existing Wireless Network As Repeater
Jan 29, 2011I'd like to give my DIR-655 (rev. A4, firmware 1.32) to my brother for use as a repeater, to work with the weak signal in his apartment. But I don't see any way to configure the device to join an existing wireless network. Am I wasting my time?
View 7 Replies View RelatedLinksys Wireless Router :: Configure USB Dapter For WRT54G Network?
Jul 8, 2011I've downloaded the driver for a tenda usb adapter. What else do I need to do to connect to the WRT54G network? I'm currently connected via an ethernet cable. Running Windows/7.
View 1 Replies View RelatedLinksys Wireless Router :: Configure Cisco 2500 To Connect To Network
Jun 27, 2012I have a Cisco 4200 Wireless Router connected directly to my cable modem. To extend the wireless range I purchased a Cisco 2500 Wireless Router. As the house is "wired," I can connect the Cisco 2500 to the cable modem in a room separate from the Cisco 4200. My question is how do I configure the Cisco 2500 to connect to the network and provide wireless coverage from both routers.
View 6 Replies View RelatedLinksys Wireless Router :: EA4200 - Configure WAP54G To Use As Guest Network
Feb 1, 2013The situation is Main house running Linksys EA4200, I have a garage apartment rental that is to far away to receive the wireless guest network.I ran a cat5e to the apartment, can I configure the EA4200 to allow the WAP54G access point to use the guest network? I want to prevent my renters from having access to the home network, but just have basic internet access separate/outside my network.
View 6 Replies View RelatedLinksys Wireless Router :: EA4500 Manual Way To Configure Network Gear
Aug 4, 2012I have had several Linksys and Cisco routers in the past, and I'm a network engineer. My E3000 died after only 18 months so I had to run down and buy a new router, thus the EA4500.
I use the manual way to configure all my network gear. Nothing on my network changed, except the router replacement.If I leave the router default address at the 192 range, DHCP will issue a IP address. However, I do not use that range and after cdhanging the range, setting my start IP address, etc, I save everything and even tried rebooting the router to no avail. The router will not issue a DHCP addrss if you change the default range.
I can manually configure my clients with a static IP and all is good, no issues at all. I just can't get DHCP to work. My E3000 was configured exactly the same way and worked just fine, well up until two days ago.I have tried upgrading to the latest router firmware, so I'm not on 2.0.37 and I did set the router back to Factory Defaults, rebooted, then configured it, and still no DCHP.
TP-Link ADSL2+ Wireless :: Configure TD-W8151N As Client Of Existing WiFi Network?
Feb 4, 2013Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
I have an unused TD-W8151N. I also have a smart TV that requires a wired connection, with no way of getting a wire to it.
Can I configure my spare TD-W8151N as a client of the existing WiFi network and connect the TV in to the TD-W8151N with a cable?
Linksys Wireless Router :: Wrt120n Always Gives Error When Try To Configure Home Network Defender
Jan 6, 2013I got error message everytime i try to configure home network defender and i tried to find the solution but no luck but everytime i click and enter my email and password i get this message, i bough this router recently and the only troubles i have is with this
View 2 Replies View RelatedCisco WAN :: 1841 WIC To Configure BRI Interface In Network Protocol Emulate Network
Apr 5, 2011I'm trying to configure my BRI interface in "network protocol-emulate network" and "layer1-emulate network" but i don't have this second command.Is someone have allready to that with this type of interface ?I've to configure this because the ISDN line of my telco is in user mode only.
View 5 Replies View RelatedWireless :: Can't Connect Laptop To Network?
Aug 8, 2011I have access to a wireless network, but when I try to connect my laptop to the network it says that it can not connect. And, of course, you can't troubleshoot it without a connection...I don't know if I accidentally changed my settings somehow or what, but I'd like to get the problem solved.
View 5 Replies View RelatedLaptop Will Not Connect To Wireless Network
Jun 11, 2011My laptop won't connect to my router however the wireless network connects to everything else in the house fine. It might work for a little bit ( sometimes an hour, sometimes only a few minutes) but then it will completely refuse to connect. The wireless LAN is enabled, it even shows full signal on the laptop it just will not connect. The LAN is enable but the button for it is blinking, I don't remember it blinking before. I'm not sure if that could be the problem. As its connecting it just says " waiting for the network" and that happens for about a minute then it just disappears.
View 2 Replies View RelatedLaptop Not Connecting To A Wireless Network
Sep 10, 2011My problem is my laptop is not connecting to the only network in my home and I can connect to all other wireless networks around.Also there is no problem with the router/modem coz all my room mates can connect and access internet wireless and also through Ethernet.Even I'm able to connect to the home network using Ethernet but not wireless. Strange but true!
[code]...
Connecting Second Laptop To Wireless Network
Aug 13, 2011connect my partner's laptop to my wireless network?
The router is a Sagem provided by my ISP (Sky). The wireless connection works fine on my MacBook, and various other devices connect no problem with the security key.
However, his laptop (Windows Vista) will not connect wirelessly. After entering the password, it says it can't connect because it 'times out' (we are obviously entering the password immediately with no delay). It connects fine with an ethernet cable. It will also connect to an unsecured wireless network we can pick up.
The security setup is WPA-PSK with TKIP encryption, and we've made sure he is using these settings.
If it might be important, he has just moved here, and previously his laptop was connected to another Sky router with no problems.
Wireless Ad Hoc Network Not Connecting On Laptop
Aug 13, 2012I tried to set up an ad hoc access point on my laptop, but it won't connect to the network I made. I'm using xp sp3.
View 2 Replies View RelatedLaptop Can't Find A Wireless Network
Oct 20, 2012last night I had reset my router, I may have factory reset it, but ever since then, nothing can connect, nor even find the wireless connection, other than the home computer that is directly wired to it. My laptop, my tablet, amd my xbox cannot connect. On my laptop, it cannot even find a connection available, even when I'm in the same room as the router. All it has are the no signal bars and the little "x". Everything was working fine before I reset the router. Now nothing can even find a connection! How can I get my connection back? my laptop is windows 7.
View 15 Replies View RelatedMy Laptop Will Not Connect To The Wireless Network?
Nov 13, 2011My laptop will not connect to the wireless network it used to connect fine but a few months ago I stayed with my girlfriend for a while and could not get it to connect at her house, so, I phoned up the mobile techy bloke and he came round and changed the settings on the router to/from wpa or something like and also the settings on my laptop, problem is now I am back home it won't connect, it finds the network ok but when I try to connect it says it can't due to a timeout? its is running windows vista.I have managed to create this post via my phone as the laptop willnot connect in anyway
View 4 Replies View RelatedSetup Wireless Network Using Only A Laptop?
Sep 17, 2012I have a laptop computer that I want to hook up to a router but I don't want to have to keep the ethernet cable plugged into my laptop. Is there a way to set this up where I can set up the router and then use the laptop connected wirelessly to the router? In a nutshell...I don't want to have to keep the ethernet cable plugged into the laptop.
View 4 Replies View RelatedLaptop Won't Connect To One Particular Wireless Network?
Nov 16, 2011My laptop won't connect to the wireless internet connection in my house, even though it will connect to any other wireless network and all other phones and computer seem to connect to this network fine. It just says the connection is local only. Every once in a while it will connect for a reason I don't know, but when I try it again the next day, it won't work. However, the laptop will connect with the ethernet cable.The wireless provider, TalkTalk, have said I might need to try installing or reconfiguring Wireless 0. I googled this and followed the instructions to set the WLAN autoconfig and wired autoconfig to automatic, but that hasn't fixed it
View 14 Replies View RelatedConnecting A XP Laptop To A Wireless Network
Jul 26, 2012I'm trying to connect my XP laptop to a home wireless network and I keep getting the following error once I enter in the passcode provided by my ISP:The network passcode needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters.I have an iphone, 3 ipads, one windows 7 pc and a mac connected to the network with no problems. The password provided by the ISP is 25 characters (letters and numbers). I would hate to have to change the password on all my devices for one Windows XP laptop. I've called Netgear who make the wireless router and they said the only solution was to change the password for all devices.
View 2 Replies View Related