How To Find Wireless User
Sep 17, 2011How do i find my Wireless Username and Password ?
View 1 Replies
ADVERTISEMENT
How To Find The User Key
Nov 26, 2012I just set up my computer & wirelss network after moving. Problem is its been so long since I originally set everything up I cannot remember things like my password or user key.
View 1 Replies View RelatedHow To Find Wan User Name And Password
May 8, 2012How to find wan user name and password
View 1 Replies View RelatedSoftware To Find The Heaviest Bandwidth User On LAN?
Sep 29, 2012I need to find a free software to find who is the heaviest bandwidth user on my LAN.The problem is that some of the users on LAN keep downloading/uploading all the time & i couldn't get to view any web-pages?
View 2 Replies View RelatedHow To Find Current Logged On User In Domain Network
Aug 22, 2011how to find the current logged on user on a domain network? I tried nbtscan but it gives me ip address, machine name and mac address. In the server column it gives <server> and in the user name column it give <unknown>.
View 1 Replies View RelatedCisco Routers :: SRP527w Can't Find User Management Tab
Sep 20, 2012I just bought a new Cisco SRP527w and I'm just new on this kind of equipment. I can't locate the user management tab as I'm trying to change the default password.Also, I can't access the internet. My dsl modem rj45 is connected to the WAN/LAN port with IP Static settings.
View 14 Replies View RelatedAAA/Identity/Nac :: Cisco ACS Can't Find / Authenticate Internal User On 3550 Switch
Apr 29, 2012I'm doing some testing with ACS server on my windows box and I can't seem to get a barebone radius authentication to work with ACS internal users. I tested the same configuration with TACACS and it works fine, so there's something missing or misconfigured in my setup.
I have a cisco 3550 switch that I want users to login using their ACS username/password.
SW1
username cisco password 0 cisco
username admin password 0 admin
[Code].....
Cisco Wireless :: Allow User To User Traffic On WLC 5500?
Nov 21, 2012Is it configurable to allow wifi user to user traffic on WLC 5508?
View 4 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 User Roles And Restricting User Access To Add Items?
Sep 22, 2011We are running ACS 5.2 patch 6 and want to restrict access for users to be able to add devices to the system.For example, admin person in site A can only add devices into the site A group and cannot see/access other sites groups.
View 1 Replies View RelatedCisco Firewall :: 5510 - Display User Message When User Connects Using AnyConnect Client?
Apr 20, 2009We are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
Cisco Firewall :: Create Local User In ASA 5520 To Allow User To Use ASDM In Read-Only Mode?
Oct 10, 2011I want to create a local user in my Cisco ASA 5520 to allow the user to use the ASDM in Read-Only mode. I want the user to view the Dashboard only.
View 1 Replies View RelatedDell :: 1505 Adapter - Can't Find Own Router But Can Find Neighbor's
Jul 12, 2013this might sound straight forward, but every other pc or console can find and connect to my router.This issue seems to happen about once every few months, sometimes it comes back by itself and reconnects completely fine.
There isn't a "user limit" on our router.Wireless adapter is dell wireless 1505 draft 802.11n wlan mini-card.
Have restarted PC and uninstalled and reinstalled the card.I tried to set the i.p address to static but it says "adapter disconnected" so won't allow me to edit any settings, despite it being able to find neighbour's wireless very easily.
Create Password And User Name Of Wireless?
Oct 21, 2012I want to create Password and user name of my wireless. so how can I do it?
View 1 Replies View RelatedHow To Limit Speed Of Wireless User
Oct 22, 2011How can I limit the speed of the wireless user.(I am using lan connection).
View 8 Replies View RelatedHow To Disconnect A User On Linksys Wireless
Sep 3, 2012How do I disconnect a former roommate from my wireless linksys internet?
View 1 Replies View RelatedCisco Wireless :: SG-300-52 User Manual?
Jun 25, 2011Where can I download the user manaul for this switch, not the quick start guide?
View 1 Replies View RelatedWireless :: Entering MAC Address Authorization For Second User?
Jul 13, 2012I would like to authorize a friend in my house to access my wifi I was told to go to http://192.1.1 and enter the MAC address of my friend. However on the site I was unable to enter the information into the box - how can I authorize my friend to use my wifi?
View 1 Replies View RelatedForgot User Name And Password For Wireless Modem
Feb 15, 2013Forgot User name and Password for wireless modem.How do I retrieve my user name and password for my wireless modem
View 1 Replies View RelatedWireless :: 1 User Account Cannot Connect On Internet?
Feb 27, 2011I have a laptop with 2 user account (one for me - administrator and the other for my eleven year old son). Connection is wireless. Until a few months ago everything was working fine and then the problems started: my son could no longer connect on the internet with Explorer and Google Chrome but I managed to connect it via Firefox. And it worked until yesterday. As of yesterday he can no longer connect to the internet even with Firefox. I tried again as an administrator to reinstall Google Chrome, but the icon is shown only on my user account. I took a completely new browser - Opera, but fails to connect. When I go to Diagnose & Repair connection problems - shows no problems. On my account everything is working properly. OS is Windows Vista Home Premium
View 2 Replies View RelatedLinksys Wireless Router :: Can't See Where To Set A User Name On E1200
Dec 29, 2011I can't see where to set a user name on my E1200. I set a password for the web interface then it boots me out and I am promted for the password and username.I don't want to download and configure my router with some poorly written software for my mac; why can't I just do it all through the good old web interface???? I'm able to set everything else up fine but when i set the password I am basically rendering the web interface usless and have to reset the router!! (running Lion, latest build with 8gigs of ram and N wirless adaptor in lappy)
Ok, so I was given this router for free so I shouldn't complain but I do not see any speed increase over my 6 year old 54G rinning wrt, perhaps I need summin better than this $50 walmart special Getting about 10mps download which is also the theoretical max of G right)
Cisco Wireless :: WLC 2106 Only One User Authentication
Mar 4, 2010I have a WLC 2106 and 1242AG.it's a hotspot configuration.So in WLC, under controller tab, i have set my ap-manager ip, my management ip, my virtual ip (1.1.1.1) and my hotspot network range ip.I set also a DHCP range for the hotspot network.
In Wlans tab, i set my hotspot wlan, with no layer 2 security and for layer 3, i set none for layer 3 security and i use web policy authentication.I use local authentication and i created under security menu, under AAA tab, 3 local net users.
From pc number 1, i get ip from dhcp, and i have authentication web page, authentication is ok and i can surf on web.From pc number2, when user 1 from pc 1 is connected, i get ip from dhcp but i have not the authentication web page, i have not DNS resolution.when i try https:1.1.1.1/login.html, i have no answer.
And when user 1 is de-authenticated, the user 2 can surf on web.So only one user can surf at the same time. not good for a Hotspot.
Cisco Wireless :: WAP4410N Best Way To Set Up Wireless For Roaming RDP User
Mar 6, 2013I am trying to resolve a wireless issue for a busy medical office I work at; it is an 11,000 sf building with many exam rooms and offices, and 20-30 wireless users. We tried placing three WAP4410N devices around the building on different channels with a shared SSID, so that users would have connectivity anywhere in the building. The medical assistants and doctors connect to their EMR software using laptops connected via RDP and we seem to have an issue with connections dropping briefly when they move throughout the building. The disruption is enough that their RDP connections often become unresponsive and they have to take time to disconnect and reconnect again. The other issue is that the laptops would jump to a stronger signal when, for instance, a nurse walked to the front of the building to get a patient and came close to a different WAP, but then when they came back to the exam area, the device would hang onto that signal as it grew very weak instead of jumping back to the closer WAP.
We've also had issues with the a couple of the devices becoming completely unresponsive but I am hoping the firmware update will fix that. Is there a way to make this work properly with this model of router? How many devices should we need for full coverage? If they just aren't up to this task, what should we be looking at to replace them? From what I have been able to research, what we are looking for is 'seamless roaming' and these devices don't support that. But I was told by a support tech that even the Aironet WAPs will have a few dropped packets going between APs so I would hate to upgrade yet again and still have the problem remain.
Wireless :: Access To User Accounts Doesn't Work?
Apr 1, 2011I can not setup a new user, or access wireless networks that show on my laptop had a virus and the shop said they removed it but the network has not worked since it a dell inspiron 1525
View 1 Replies View RelatedWireless :: Possible To Make User Based Setup For Each Room
Feb 26, 2011I have 4 story hotel with 40 rooms, 10 rooms in each floor, i want to setup wifi network to cover all the rooms, what should i do or what instruments to use, is it possible to make user based setup for each room.
View 2 Replies View RelatedLinksys Wireless Router :: WRT54GH How To Check All User
Oct 27, 20111st time use cisco router.Where to check the list of user connecting to the router?
View 6 Replies View RelatedLinksys Wireless Router :: WRT350N User Id And Password
Aug 2, 2011I have the WRT350N router. to access my usb storage link from within the LAN it asks for user id and password as I want it. but to access it from outside my LAN it just connects without asking for user id and password. My guess is it has something to do with shares and how they are setup. I can't figure out how to set it up so it asks for user id and password when attempting to connect to my storage link from the net?
View 1 Replies View RelatedLinksys Wireless Router :: E2500 Not Asking For User Name / Password
Jan 6, 2013Having just upgraded from a WRT54G to a E2500 all I can say is that I'm disappointed with Cisco.Having spent a few hours yesterday trying to resolve issues via Live Chat (ID 130105-001270 & 130105-002081) and spending more time today - I'm truly at wits end. I consider myself pretty knowledgeable with computers and networking.I'm not sure if anyone from Cisco's Tech staff sees these posts but I don't know where else to "complain" in hopes that the next software/firmware update resolves these problem(s).
The first is my router's setup screens are totally open when using my desktop. The desktop is hardwired to the router and has the Cisco Connect software installed. I open the Cisco software and go to advanced settings. There I'm shown what my router's name is and its password. This is really strange - why would you wish to display this information PRIOR to requesting username and password? However, once there you can go right into the setup screens by clicking OK.I have also entered these screens directly without being prompted for username/password by using 192.168.1.1 or my router.local via Internet Explorer 8 or Google Chrome. At other times I am denied access because IE cannot display page.I'm concerned because I can hide the Cisco Connect software however, anyone that uses my desktop has full access to my router via the web or Cisco Connect.
The second issue is that the password to enter the router and allow access to the internet IS THE SAME! When I had my WRT54G running I had one password (8 alpha characters) to enter setup screens. There was a router generated, 16 alpha/numeric character, password to allow outside devices such as laptops, TVs and game consoles access to the internet. When I set this router up I installed the 16 character password originally used so my laptop and Wii could connect without having to fool around with their settings. Everything was fine until I went into administration and changed the password to my old 8 character one. That is when I found out that the router uses this password setting under administration to control access to the internet AND access to the router settings!
I have uninstalled and reinstalled IE 8. I have ensured that my browser's history and caches are clear which they do when I shut IE down. I'm running Windows XP service pack 3 with the "proper" anti-virus and anti-malware software. My system is up-to-date.I have ensured that the router is running the latest firmware 1.0.05 build 2 and software 1.4.11299.0.I have seen other posts suggesting the removal of Cisco Connect however, I feel that this is a bandaid solution.I'm not professing to be a router technician however, I "feel" the problem might be the fact that the password issue is the problem. Since the same one is being used for both accessing the router and having the router grant access to the net, my desktop is allowed to access the setup screens without being prompted for username and password.
Cisco Wireless :: 2504 - User Not Getting DHCP IP Address?
Aug 25, 2012i have configured wlc 2504 .in that i have configured two interfaces.one is guest, 2nd is internal user, the pblm when user try to connect with that contain ssid user not getting ip address,
i have connected only one link between core to wlc on port 1.for guest interface i used port 4.but no physical link.
Cisco Wireless :: 1200 / Using A Single User Name For RADIUS
Jun 7, 2012I have a WLAN with 5 1200 Series AP (A/G) configured for Fast Roaming using the Cisco supplied documentation. Can I use one user name for all of my devices to connect to the Internal Radius Server? This would be similar to having a passphrase for WPA.
View 3 Replies View RelatedCisco Wireless :: WAP4410N - SSH User Management And Log Email?
Mar 20, 2011We have just bought 4 WAP4410N. These units will be handling wireless network at the edge of our network, only allowing for Internet access.We will be creating two SSID's, one for employees and another for guests, with different wireless password rotation policies, intended to be changed automatically by an application using SSH.Is it possible in any way to create another SSH user just for this purpose? I do feel unconfortable using the management user for this (call it paranoia!). The same with having SSH accessible from the wireless end. Any way I can tweak sshd and having it persist between reboots? Also, another issue is that we have the AP's configured for e-mailing the log however we don't receive it. Connectivity and sending has been tested with snmpc on console and everything seems to be OK.
View 8 Replies View RelatedCisco Wireless :: WAP321 Captive Portal User LOG
Dec 6, 2012We put in place 4 devices. Everything is working five (apple IOS6+ not obv...). So when somebody is connecting he have to read our agreement, enter is full name and check the box. (is not personnal session...)How can i have log his name and access hours???? Because a saw is connected when is connected in live on : Captive Portal>Authenticated Clients .But i want to keep a log with this informations + the date/hour if possible.
View 1 Replies View RelatedCisco Wireless :: How To Set Up User Authentication On Aironet 1200
Jan 22, 2013I would like to be able to have a few "guest" users on the Wireless network for visitors. Is there any method to have a prompt for "Username / password"? I would like the user accounts to have different expiry periods if this is possible. My current config is attached. The SSID "test" appears on the network. The SSID "test111" does not appear.
View 1 Replies View RelatedCisco Wireless :: Restriction SSID Per User With ACS 5.x Version
Sep 15, 2011I would like to ask some question on WLAN technology, which I using WiSM version 2. And i get requirement that user must be restrict with SSID, so, i found that it can do it on ACS version 4.x via NAR for SSID-based authentication feature. Then, is it possible to do restriction on ACS Version 5.x?
View 4 Replies View Related