How To Disconnect A User On Linksys Wireless
Sep 3, 2012How do I disconnect a former roommate from my wireless linksys internet?
View 1 Replies
ADVERTISEMENT
Linksys Wireless Adapters :: AE2500 Randomly Disconnect
Mar 27, 2012i am using a Linksys AE2500 and it will randomly disconnect. the bar icon on the bottom right shows a yellow icon over it. running the tool to reconnect does not reconnect me to the internet, i have to reboot my computer.
View 9 Replies View RelatedLinksys Wireless Adapters :: Wusb600N / 3g Usb Modem Disconnect?
Mar 9, 2011wireless N adapter wusb600N and win 7 pro fully upgraded:Ive tried this with multiple adapters and multiple 3g providers/usb modems. When I connect the adapter, after a while, the 3g modem disconnects and turns red, and the modem connection software says it cant find the usb 3g device. It feels like the windows is somehow mixing the adapter, and the 3g modem or somthing. Again this same problem happens with multiple devices. Is there some settting im missing.
View 1 Replies View RelatedLinksys Wireless Router :: Computer Disconnect From WRT120N When Using Torrent
Oct 29, 2011When I start my torrent client (deluge) in short time computer disconnect from router. My I need to configure some settings on my wrt120n?
View 6 Replies View RelatedLinksys Wireless Router :: E4200v1 On 1.0.04 Suddenly Causing Wifi Disconnect?
Jun 19, 2012I've had an E4200v1 in use as my home's main router for about 3 mos. And while many others have reported disconnect problems (I think), I myself have never seen any. My router and its N & G wifi networks have been rock solid. Until yesterday that is.Now all of a sudden, most of my family is complaining about wifi disconnects, slow speeds, etc. (My primary PC is hard-wired so I don't see any problems whatsoever... the problem apears to be wifi-only)And the Apple devices (OSX & IOS) seem to have the most severe problems. But Windows devices have also seen problems, just not as critical.Also, it's worth noting that I've been running 1.0.04 the whole time, without any problems... it seemed relatively stable to me. That is until yesterday.
I've bounced the router, I've disabled/re-enabled Wireless G network. I've switched mode from "mixed" to "G-only" back to "mixed". I've changed the channel width back to the default of Auto (I had been using 20Mhz), which increased my throughput (as measured by Qcheck) so I'm leaving it "Auto".
Linksys Wireless Router :: WRT120N - Randomly Restart And Disconnect All Computer On Network
Aug 23, 2009I just bought a WRT120N and at different times it will randomly restart and disconnect all the computer on my network I have 4 wired devices and 4 Wireless devices.
View 9 Replies View RelatedLinksys Wireless Router :: Disconnect WRT54G And Hard Wire To Cable Modem
Feb 5, 2013I am recieving error 619 (port for connection was closed) when trying to connect over my wireless connection. If I disconnect the WRT54G and hard wire to the cable modem I can VPN in without a problem. I have enabled IPSec / PPTP / L2TP on the VPN security tab and have reset the wireless modem.
View 4 Replies View RelatedLinksys Wireless Router :: EA3500 Disconnect After Plug In Portable Hard Drive
Mar 6, 2013I bought an EA 3500 refurbished through linksys. I can't configurate it using the CD-Rom. Always said "can't find your router". So I flash with the classic firmware, and it fixs the problem and automatically upgrade to smart Wi-Fi. That being said, whenever I plug in a portable hard drive, the router disconnect from internet after a minute. I tried my seagate HDD and also my flash driver. Both Lost internet after a minute or so. So I think it is probably the router's problem.
View 4 Replies View RelatedLinksys WAG320N - LAN Activity Causes Disconnect?
May 24, 2011Sometimes when I actively use the LAN (copy a file or stream media), my PC loses connection to both the internet and LAN. It doesn't always happen though. I can always fix it by opening network connections and disabling Local Area Connection and then re-enabling it. However, if I don't do this, the connection stays off indefinitely. The PC that loses connection is on Windows 7 64-bit with Asus P5K integrated ethernet controller with latest drivers. Modem/router is Linksys WAG320N.
View 10 Replies View RelatedLinksys Wireless Router :: WRT54G V1 Disconnect Power From Router For About 15 Seconds / Plug It Back In
Apr 27, 2013I have a Linksys WRT54G2 v1 router which is having a daily problem of connectiing to the Internet on my home wireless LAN. My temporary solution is to disconnect the power from the router for about 15 seconds and plug it back in .... and all is well.... at least for another day or so.The real problem is that instead of properly connecting to IPv4 address 192.168.1.100 ..... it randomly connects to Autoconfiguration IPv4 address 169.254.29.54 When this problem occurs the SSID list shows both my 192 connection as well as a public network with no Internet connection?
I've used this router for several years without a problem until I recently bought a new Canon wireless MG5320 printer which initially had problems connecting to my LAN. After a telco with tech support the printer works fine but now I am now experiencing the Autoconfig address problem.My LAN consist of the WRT54G router, a Motorola cable modem, a Lenovo laptop running Win7 64bit, a Hp desktop running Win7 64bit and the Canon wireless printer. (all connected wirelessly)
Linksys Cable / Dsl :: Wag120n Wifi Disconnect Until Restart Router
Jan 1, 2013I have a linksys WAG120N router updated to 1.00.16and I have Wi-Fi problems that while I use Wi-Fi on my laptop or mobile then the Wi-Fi disconnected (wifi on router still green but i can't connect ) until i restart router.
View 7 Replies View RelatedLinksys Wired Router :: VPN Tunnel Disconnect Between RV016 And RV082
Jun 2, 2011Currently I have a VPN tunnel setup between our company locations. Location A has Linksys RV016 and Location B has RV082. Everything has been working with no problems for the past 2 years with only minor disconnect issues in the VPN tunnel between the locations.
For the past 2 weeks I have been running into issues with the Tunnel. Users in Location B are reporting problems with losing connection to applications that are hosted in Location A. At first I start with doing a ping to router address in Location B and I get "request timed out". Next I login to router in Location A and under VPN I notice that the VPN tunnel is not disconnect (I see disconnect button). Once I click on Disconnect the screen refreshes and that seemed to restablish connecting with router in Location B. The drop connection has been been going on for the past 2 weeks and only happens once a day specifically between 1 PM and 3 PM EST. I have been reading all over the internet and no luck at all. The VPN tunnel settings are the same on both routers and under Advanced options both Keep Alive and Dead Peer Detection (DPD) are checked.
Cisco Wireless :: Allow User To User Traffic On WLC 5500?
Nov 21, 2012Is it configurable to allow wifi user to user traffic on WLC 5508?
View 4 Replies View RelatedLinksys Access Point :: WAP4410N - Internet Connection Always Connect And Disconnect
Aug 18, 2011I have a new notebook Sony Z217GG, I connected WAP 4400N was very smooth, but after connected WAP 4410N, the internet connecting always connect and disconnect, I check the notebook wireless model is intel 6230.
View 1 Replies View RelatedLinksys Wired Router :: RVL200 - Java Applet (No Connect / Disconnect Buttons)
Apr 4, 2011I got problem with RVL200, it works good on my botch mac's witch OSX 10.5,10.6 and Firefox 3.6 but stops working after last java update. The machine switch 10.5 is working because I don't update Java but the other computer is up-to-date.
Problem is with launching the Java applet ,all the rest is working.- I'm log in to SSL VPN Tunnel- The new window is opening I accept applet to run .It try but nothing happens the window is blank with no connect / disconnect buttons.
All I have is Java error:Plug-In Java 1.6.0_24JRE version 1.6.0_24-b07-334-10M3326 Java HotSpot(TM) 64-Bit Server VMjava.lang.SecurityException: [code]....
Linksys Wireless Router :: Can't See Where To Set A User Name On E1200
Dec 29, 2011I can't see where to set a user name on my E1200. I set a password for the web interface then it boots me out and I am promted for the password and username.I don't want to download and configure my router with some poorly written software for my mac; why can't I just do it all through the good old web interface???? I'm able to set everything else up fine but when i set the password I am basically rendering the web interface usless and have to reset the router!! (running Lion, latest build with 8gigs of ram and N wirless adaptor in lappy)
Ok, so I was given this router for free so I shouldn't complain but I do not see any speed increase over my 6 year old 54G rinning wrt, perhaps I need summin better than this $50 walmart special Getting about 10mps download which is also the theoretical max of G right)
Linksys Wireless Router :: WRT54GH How To Check All User
Oct 27, 20111st time use cisco router.Where to check the list of user connecting to the router?
View 6 Replies View RelatedLinksys Wireless Router :: WRT350N User Id And Password
Aug 2, 2011I have the WRT350N router. to access my usb storage link from within the LAN it asks for user id and password as I want it. but to access it from outside my LAN it just connects without asking for user id and password. My guess is it has something to do with shares and how they are setup. I can't figure out how to set it up so it asks for user id and password when attempting to connect to my storage link from the net?
View 1 Replies View RelatedLinksys Wireless Router :: E2500 Not Asking For User Name / Password
Jan 6, 2013Having just upgraded from a WRT54G to a E2500 all I can say is that I'm disappointed with Cisco.Having spent a few hours yesterday trying to resolve issues via Live Chat (ID 130105-001270 & 130105-002081) and spending more time today - I'm truly at wits end. I consider myself pretty knowledgeable with computers and networking.I'm not sure if anyone from Cisco's Tech staff sees these posts but I don't know where else to "complain" in hopes that the next software/firmware update resolves these problem(s).
The first is my router's setup screens are totally open when using my desktop. The desktop is hardwired to the router and has the Cisco Connect software installed. I open the Cisco software and go to advanced settings. There I'm shown what my router's name is and its password. This is really strange - why would you wish to display this information PRIOR to requesting username and password? However, once there you can go right into the setup screens by clicking OK.I have also entered these screens directly without being prompted for username/password by using 192.168.1.1 or my router.local via Internet Explorer 8 or Google Chrome. At other times I am denied access because IE cannot display page.I'm concerned because I can hide the Cisco Connect software however, anyone that uses my desktop has full access to my router via the web or Cisco Connect.
The second issue is that the password to enter the router and allow access to the internet IS THE SAME! When I had my WRT54G running I had one password (8 alpha characters) to enter setup screens. There was a router generated, 16 alpha/numeric character, password to allow outside devices such as laptops, TVs and game consoles access to the internet. When I set this router up I installed the 16 character password originally used so my laptop and Wii could connect without having to fool around with their settings. Everything was fine until I went into administration and changed the password to my old 8 character one. That is when I found out that the router uses this password setting under administration to control access to the internet AND access to the router settings!
I have uninstalled and reinstalled IE 8. I have ensured that my browser's history and caches are clear which they do when I shut IE down. I'm running Windows XP service pack 3 with the "proper" anti-virus and anti-malware software. My system is up-to-date.I have ensured that the router is running the latest firmware 1.0.05 build 2 and software 1.4.11299.0.I have seen other posts suggesting the removal of Cisco Connect however, I feel that this is a bandaid solution.I'm not professing to be a router technician however, I "feel" the problem might be the fact that the password issue is the problem. Since the same one is being used for both accessing the router and having the router grant access to the net, my desktop is allowed to access the setup screens without being prompted for username and password.
Linksys Wireless Router :: E4200v2 USB User Control?
Jan 27, 2012I have connected the USB drive. I can copy file to the drive, but I have not figured out how to set users or groups I see the Access part of the screen open then close before I can set permissions. I just started with this today, so I figure I am doing something wrong. Everyone can access the files now, but I want to control who can, how do I do this?
View 2 Replies View RelatedLinksys Wireless Router :: Wrt160n V1 - Cannot Access User Interface At 192.168.1.1
Mar 21, 2013I have a wrt160n v1 that stopped working after a power outage. The power light stays solid and I cannot reset the device with the reset button, power cycle, and I cannot access the user interface at 192.168.1.1. Is it bricked? It doesn't show up on my wireless network and when I try to access it via ethernet cable it shows up as an unidentified network with no network access
View 2 Replies View RelatedLinksys Wireless Router :: Guest / User Authentication E2000?
Jul 7, 2011E2000 has the guest account feature. Not sure if all guests shares the same login credentials. I would like to have guests account use seperate logins. Is this feature available? Another thing, I read the manual and it is indicated that only up to 10 maximum guest acccounts is allowed. I am looking for more than 10 - kinda like a hotspot software.
I've been looking everywhere. I've seen hotspot system, ddwrt, chillspot, etc. But it's complicated as firmware needed to be flashed.
Linksys Wireless Router :: WRT54G - Lost User Name And Password
Jun 19, 2011I haven't used my Linksys WRT54G v5 wireless router for about 1 1/2 years and needed it now at a new place.I set a user name and password I've long forgotten for access to the web based security protocols for the modem and I've lost the disk for the control protocol program.I tried pressing the reset button to clear the modem and it took the WPA protocol off the modem so I can use it without any security but that's not a good thing.How do I get it freed up so I can get to the security protocols and put security back on my modem?
View 9 Replies View RelatedLinksys Wireless Router :: E4200 - Can't Download User Guide
Aug 19, 2011When I click on the pdf icons or the "User Guide" link on the E4200 product page, Firefox 5.0.1 pops open a new window, but it's blank. I can't see the pdf file. Usually, when I click on a link to a pdf, FF gives me the option of saving or opening the file.
View 1 Replies View RelatedWireless :: How To Disconnect WPA Pre-shared Key
Mar 5, 2011When I try to connect wireless my mobile showing WPA pre-shared key?
View 1 Replies View RelatedLinksys Wireless Router :: EA4500 Blocked User Accessing Log In Screen
Sep 7, 2012I have the EA4500 router with cisco connect cloud, must say this router is great for limiting kids online.1 question I have however is the ability for a blocked user (internet access block) that is redirected to the cisco web site and presented with a log in screen. Is there anyway I can disable this becuase the kids stay up all night trying to figure out the password to log in, I just want it to say internet access blocked with no option for logging in for the blocked user.
View 7 Replies View RelatedLinksys Wireless Router :: E2000 -Admin User ID Changed To SSID Name?
Jul 12, 2010I have manually configured the E2000 and set the admin password. When I was trying to log back in, I could not. I reset and reconfigured and set the password again. I still could not log in using "admin" and the password I set up. I thought I was losing my mind. Just on a hunch, I used the SSID name instead of "admin", then entered the password that worked. I am able to login, but I need the username to be admin, not the SSID. Has anyine else had this issue? Any way to change the administrator name back to admin??
View 5 Replies View RelatedLinksys Wireless Router :: X2000 Doesn't Need A User Name / Only A Password Required
Nov 27, 2011Just set-up a new X2000, loaded latest firmware 2.0.01, configured it via the web UI ('Browser based utility' as per the manual). Connected OK to my ADSL broadband by O2. Configured wireless, everything OK. Funny it doesn't need a user name, only a password, my prevoius WAG160N could be configured for both.Now I want to configure the Parental Controls, BUT apart from my computer name and an Android phone name, all I see in the Target Device ADD button pop-up are a list of repeated 'Network Device'. There seems no way to be able to distinguish which is which device (mix of XP & Win 7 PC's and HP Printer through a separate switch), as it does not show IP address or MAC.
I thought I may have better luck with the Cisco Connect software (which I didn't use to set-up the router). I downloaded the latest version 1.4.11194.0, and ran this on another computer with wireless. Apart from reconfiguring my static IP address to DHCP, and then connecting through DHCP, the software said it could not configure my router. So it never gets to a point where it installs any program on the computer so that I can configure Parental Controls. How do I get the router to show ALL the computer names in the list rather than 'Network Device' or is there a way to distinguish which 'Network Device' is which computer?
Linksys Wireless Router :: WRT54G - Create New User ID / Password For Security?
Jul 15, 2012Time Warner used remote access to get into my wrt54g system and create a new user id/password for security. As a result, my hp printer will no longer communicate with my computer. HP says to hook up a usb from router to printer, but there's no usb port on the wrt model I own. I hooked up a usb from computer to printer but it did nada...
View 5 Replies View RelatedWireless :: Can't Disconnect From Individual Connections?
Jan 13, 2011I'm using Windows 7 I'm having problems disconnecting from individual wireless connections. When I click 'Disconnect' from the connection manager window in the bottom right corner of the screen, nothing happens at all. I've tried this on several different connections and none of them work. I'm using: Intel(R) Wireless WiFi Link 4965AGN
View 1 Replies View RelatedTrendnet Wireless Router Getting Disconnect
Apr 23, 2011I have just set up a wireless trendnet router. Everything is set up normal and its working correctly, it correctly assigns internal IPs to wireless devices. The problem is though that for some reason we all get disconnected in games for instance and some games more than others. Rift disconnects every 30 seconds to 1 minute, World of Warcraft disconnects often, Live Messenger disconnects as well, Age of Empires Online can sometimes work fine for hours, then sometimes disconnect every now and then. Steam doesn't disconnect. Its more or less the same on any of our laptops. (all running Windows 7 64 Bit Home Premium or Professional)
View 2 Replies View RelatedWireless Network Randomly Disconnect?
Apr 5, 2012My wireless network randomly disconnect ? adsl/thomson TG585 v7/TP-Link N adepter/win7. In device manager (show hidden devices it look like this) ?
View 1 Replies View RelatedLinksys Wireless Router :: WRT610N Storage Link User / Group Creation?
Dec 30, 2008I just got the WRT610N and I really like it so far, I'm playing with the NAS option and I can't get it to create any new users or groups. I click on the link, fill out the form and click on 'modify user' (The set-up guide has a button there for 'save settings') and nothing gets created. I tried this several times and there are no new groups or users. I checked the storage.info file and there is no additional users or groups there either. I think I can edit that file but I'm not too sure what these last 2 lines mean
nas_login@admin:admin:admin: off guest:guest:guest: onusers_content@admin:admin:admin:admin: off guest:guest:guest:guest: on