Linksys Wireless Router :: WRT54G V1 Disconnect Power From Router For About 15 Seconds / Plug It Back In
Apr 27, 2013
I have a Linksys WRT54G2 v1 router which is having a daily problem of connectiing to the Internet on my home wireless LAN. My temporary solution is to disconnect the power from the router for about 15 seconds and plug it back in .... and all is well.... at least for another day or so.The real problem is that instead of properly connecting to IPv4 address 192.168.1.100 ..... it randomly connects to Autoconfiguration IPv4 address 169.254.29.54 When this problem occurs the SSID list shows both my 192 connection as well as a public network with no Internet connection?
I've used this router for several years without a problem until I recently bought a new Canon wireless MG5320 printer which initially had problems connecting to my LAN. After a telco with tech support the printer works fine but now I am now experiencing the Autoconfig address problem.My LAN consist of the WRT54G router, a Motorola cable modem, a Lenovo laptop running Win7 64bit, a Hp desktop running Win7 64bit and the Canon wireless printer. (all connected wirelessly)
View 2 Replies
ADVERTISEMENT
Mar 6, 2013
I bought an EA 3500 refurbished through linksys. I can't configurate it using the CD-Rom. Always said "can't find your router". So I flash with the classic firmware, and it fixs the problem and automatically upgrade to smart Wi-Fi. That being said, whenever I plug in a portable hard drive, the router disconnect from internet after a minute. I tried my seagate HDD and also my flash driver. Both Lost internet after a minute or so. So I think it is probably the router's problem.
View 4 Replies
View Related
Feb 5, 2013
I am recieving error 619 (port for connection was closed) when trying to connect over my wireless connection. If I disconnect the WRT54G and hard wire to the cable modem I can VPN in without a problem. I have enabled IPSec / PPTP / L2TP on the VPN security tab and have reset the wireless modem.
View 4 Replies
View Related
Nov 8, 2012
I have a Linksys E2500 and recently the power led light on the back of the router started blinking. The router itself seems to be working fine. I can access the router and the router seems to be assigning the IP addresses fine. I did look up the issue on the knowledge base and tried all the solutions but the light is still blinking. Not sure what to do anymore.
View 5 Replies
View Related
Aug 15, 2012
We have a Model WRT54GLWireless-G router. At least once a day it loses it's internet connection. All computers that are wired to the switch that is connected to it lose their internet as well as any wireless devices. I have to manually power-cycle the router to get internet back.
View 9 Replies
View Related
Sep 6, 2006
The power led always flash at WRT54G?
View 9 Replies
View Related
Jan 26, 2012
I'm having a problem with my WRT54G wireless broadband router. The power light is blinking and I can no longer access the internet. What should I do. I can't seem to understand the self-help on your site.
View 2 Replies
View Related
Jan 3, 2013
I have a Linksys Wireless Router, model WRT54G. I read in the user manual that it is best to turn off the router when not in use for better security measures, but there in no power button on the router. So does this mean that the power cord would have to be unplugged from the electrical outlet each time to turn the router off? This is kind of inconvenient, especially where my cord is plugged in. Also would unplugging it from the outlet each time, would this mess up the settings on the router? Is it really necessary to turn it off?
View 9 Replies
View Related
Jan 24, 2009
Ive recently tried to update the firmware and everything went as instructed, then the power and LAN light went out. Now I have the indicator lights for the computer and modem, but thats is. No internet or SSID broadcast. I cannot log into or ping the unit, and have tried the hard reset many times, with no effect.
View 8 Replies
View Related
Oct 29, 2011
the power light on my wrt54g v2.2 router keeps blinking and it wont connect to the internet when connected
View 3 Replies
View Related
Jul 4, 2006
My Wireless-G WRT54G router has a blinking power light and the startup software says "Unable to connect to the Router! Check that the Router has been connected to the computer, and that your Ethernet adapter is working." I tried uploading the firmware but I can't get to the router page to update. Is there a known problem or solution here or am I just going to have to find the router page?
View 9 Replies
View Related
Apr 6, 2011
I lost my power adapter for the WRT54G router. I have a 12V / 1000 mA brick adapter.
View 5 Replies
View Related
May 17, 2008
My router was working fine until today. I figured it out when I tried to get on the internet and it wouldn't let me. I hooked up the ethernet directly from my modem to my computer and then my internet worked fine.
View 4 Replies
View Related
Feb 19, 2010
I have many of these, many models and versions. I have a WRT54G v1, V1.1, V2....V8, I also have WRT54GS's WRT54GL's and others, Lots of other Linksys stuff, almost all of it in the Blue and Black boxes of varing sizes.I have a heck of a time when I reconfigure my network or the wife changes the furniture. I'd love a single document that lists the power specifications and adapter requirements for thens devices... I can't find them any where on the Linksys site. I Have looked and searched and nowhere can I find a consolidate list.
Any have a list of the DC power Specifications, Barrel sizes, and other stuff needed to buy a replacement Power adapter. This page url...lists a lot of information but does not list this critical information... I am amazed that Linksys does not have it listed some where here. Losing a wall wart should not be a reason to pull you hair out, just a simple purchase, If they don't want to stock them, then at least tell us what they are.
View 4 Replies
View Related
Dec 14, 2011
I was upgrading the firmware of the WRT54G router when the notebook´ screen closed and it went to standby mode. It was sttoped the upgrade process.Now only the ports and Internet LEDs light up, but the power LED is off.I also cannot connect to the navigator for show the administrator´s window. What is the procedure to recover the operation of the router in a situation like this?
View 3 Replies
View Related
Oct 29, 2011
I need fixing my router. I updated the firmware and it said the upload has failed ever since then:
-the router doesn't work
-blinking power light
-DMZ light doesn't turn on
-can't access 192.168.1.1
My router is a WRT54G v5
View 9 Replies
View Related
Feb 3, 2012
the power light on my wrt54g v2.2 router keeps blinking and it wont connect to the internet when connected, what should i do?
View 1 Replies
View Related
Mar 24, 2011
I've seen related to flashing power lights on the router involve fixes via firmware upgrades off a PC.I'm on an iMac os 10.6.7. The WRT54 used to work as a wireless modem a couple of years ago. Tonight, it doesn't. power light blinks. Can't access any webpage interface for the thing. Reset, power down, computer restart, cable modem turn off don't change anything. Is there anything that can be done other than tossing the linksys? If that is the only option, are there wireless routers more suitable for a Mac?
View 4 Replies
View Related
Dec 18, 2011
I have not yet hooked up my router, N150. What I would like that after I hook the router up and then deside I don't want to use it. How do I disconnect it and go back to using my DSL modem and being connected to the internet?
View 3 Replies
View Related
Nov 25, 2011
Our wireless network has started to drop out periodically. If we pull power and restore, the network immediately comes back up on all our our devices. We have the WRT54G, and we have 2 PCs, 2 Macs, and 3 iPhones, and a wired home phone. Normally there are not this many devices connected, but with everyone home for Thanksgiving and all these devices on the network we have started to see this issue.
Are there simply more devices than the router can handle? Is one of the devices crashing the network for everyone? What typically will cause something like this?
View 2 Replies
View Related
May 26, 2007
I have a WCG200 v1, and lately it keeps reseting, so I started thinking maybe it's a power problem. I go to unplug it, and the power plug is extremely hot, so we unplug it, and let it cool off, then plug it back in later. It works fine, and we go to bed, I wake up this morning and it's back to very hot again..
View 2 Replies
View Related
Feb 1, 2011
I have the Linksys WRT54G Wireless Router, when i hook my at&t modem to the modem port on the router the wireless portion of the router works, when i plug any pc into the Ethernet ports it doesnt work!If i plug the modem into the Ethernet port and plug other pcs into the other existing Ethernet ports it works by Ethernet but not wireless.
View 1 Replies
View Related
Jun 30, 2011
I've had my DIR-601 for almost a year now and it's been working near flawlessly until just recently. I have a very simple setup with a desktop PC, router, Time Warner cable modem, and the only device that accesses the router is my Droid phone. I shut my PC down every night. The next day when starting up my PC, there's no internet connection. I haven't fooled around with any router settings, but what I've been doing to re-connect is unplug the cable modem power cord and router power code, wait a minute, then re-plug them back in and it connects right away. Is there something easy that I can do/repair to correct this? Maybe I should check if there are firmware updates?
View 1 Replies
View Related
Sep 30, 2012
I need to switch back to my old router currently I am using the EA6500 in the GUI of the latest firmware there is no longer a button "Release IP Address" but it has been replaced with "Release and Renew" button this is causing that the IP address lease form ISP never gets released and I can not switch the routers.
View 9 Replies
View Related
Sep 9, 2011
I have a WRT 160N v2 router. There's 1 computer wired to it, that works fine. Then I have 2 laptops and a pc wireless to it. One laptop is a mac and that seems to be fine, another is a Compaq notebook that has trouble connecting and the pc has the same problem. The signal strength is very good to excellent so thats not the issue. What happens with the pc is, it will connect but at times its only for a few seconds then it disconnects. Sometimes restarting the computer fixes it for a while but it will eventually start having the problem again. It detects the wireless network just fine, and the router's firmware is up to date. I have a feeling that its the settings in the router but im not sure what to change.
View 3 Replies
View Related
Oct 29, 2011
When I start my torrent client (deluge) in short time computer disconnect from router. My I need to configure some settings on my wrt120n?
View 6 Replies
View Related
Feb 10, 2011
Two days ago there was a quick power outage here, just one of those flicks off flicks back on deals, but when it came back on I noticed my internet wasn't working. Couldn't figure out what the deal was so after trying a few other things I ended up eliminating my Linksys WRT54G router and just using my DSL modem. Internet works fine.
Now, I've always been kind of sketchy on networking stuff, but I don't think there router is broken I just think it's been reset or something and now I don't know what setting I need to change to get it back to working order.
Here's the kicker though. I had the DSL modem in bridge mode and the router handling traffic before but I had a huge issue with that where my Steam would only download at 10-15 KB/s. Not only that but it would take forever to login and crash constantly. This would happen on my brother's computer too, which is on the same network. I could never figure out how to fix it as forwarding ports had no effect and every other fix I could think of amounted to nothing as well. Hell, I even did a fresh install to no avail.
Now going straight into the modem my Steam is downloading at full speed and there's no slow login or crashing issues. The thing that boggles my mind though is that more than once before I tried doing this very same thing, going straight into the modem, and it didn't fix the problem.
Ideally I want to get the router back up and running and keep my Steam in full working order, essentially to have my cake and eat it too, but the priority is to get the router back up in running as I have another PC on this network, plus a 360, a PC, a wireless printer, and two Wii's.
View 10 Replies
View Related
Nov 24, 2011
I have Linksys WRT160N v2 wifi router that I have been using for over a year now, till two months back I was very happy with the router, speed was good without any signal issues though in last couple of weeks I have noticed that the router has started to create problems like the browsing will stop it self for a few seconds without any reason (specially I notice this when I am on youtube playing a video that will stop after 2 or 3 minutes).
View 7 Replies
View Related
Dec 4, 2011
My wireless from my Linksys E2000 router NEVER works. I've tried the same things and I have also tried to change the Advanced wireless settings, none of these things worked.When I unplug the energy cable from my router for ~15 secs, I sometimes can connect to a Wireless signal, this signal remains for about 30 seconds and is then gone again. This happens even if I'm standing right next to my router.I have no idea what the problem is, even I find this story very unbelievable, but I have tried everything I could and still we never have Wireless
View 1 Replies
View Related
Jul 16, 2011
I have a E4200 setup for 2.4 & 5G running the latest firmware. When I connect to the router wireless 192.168.1.1 and log in, it takes a few seconds for the web interface to display. Same happens when switching to the different config tabs. Is there any reason for this? I would think it would be immediate but it takes anywhere from 3-5 seconds for IE9 to respond.
View 2 Replies
View Related
Jun 19, 2012
I've had an E4200v1 in use as my home's main router for about 3 mos. And while many others have reported disconnect problems (I think), I myself have never seen any. My router and its N & G wifi networks have been rock solid. Until yesterday that is.Now all of a sudden, most of my family is complaining about wifi disconnects, slow speeds, etc. (My primary PC is hard-wired so I don't see any problems whatsoever... the problem apears to be wifi-only)And the Apple devices (OSX & IOS) seem to have the most severe problems. But Windows devices have also seen problems, just not as critical.Also, it's worth noting that I've been running 1.0.04 the whole time, without any problems... it seemed relatively stable to me. That is until yesterday.
I've bounced the router, I've disabled/re-enabled Wireless G network. I've switched mode from "mixed" to "G-only" back to "mixed". I've changed the channel width back to the default of Auto (I had been using 20Mhz), which increased my throughput (as measured by Qcheck) so I'm leaving it "Auto".
View 9 Replies
View Related
May 6, 2012
My new EA4500 works fine all day, both wireless and wifi, on both bands, but nearly every evening, the wifi signal disappears, as shown on a wifi app for my smart phone, but not on Issid on my laptop, strangely, and my PC laptop and iPad both disconnect, then reconnect. Smart phone disconnects too. It isn't like the signal drops in strength, it just goes away! I have tried various settings on modes, and bandwidths, I am using different SSID's on each band, WPA2 security with a long non-dictionary passphrase and MAC filtering. The hardwire connection works great at 30+ Mbps even when the wifi is disappearing from the wifi scanner and the wifi connections are dropping. In other words, the cable connection/modem is working fine, but the wifi radio signal stops or the SSID drops off the signal. I really can't tell, but I know it is becoming very frustrating. The old WRT54GS works fine if I put it back on-line in the evening when these things start to happen.
I have turned off everything I can think of in the house that transmits or might transmit, in case it is an interference thing. I have tried disabling the 5 GHz side, since I can't see what is happening on that band, and the last thing I tried was changing the MTU from 1500 to 1400. So far, the past evening, it was okay, but I am not confident it will stay that way.
View 6 Replies
View Related
Aug 27, 2011
Since a few days my WRT120N gives an audio alarm (beep) about every 10 secs. Cannot find how to overcome this or find the root cause. Installed new s/w version. H/W reset. Nothing works.
View 2 Replies
View Related
