Trendnet Wireless Router Getting Disconnect
Apr 23, 2011
I have just set up a wireless trendnet router. Everything is set up normal and its working correctly, it correctly assigns internal IPs to wireless devices. The problem is though that for some reason we all get disconnected in games for instance and some games more than others. Rift disconnects every 30 seconds to 1 minute, World of Warcraft disconnects often, Live Messenger disconnects as well, Age of Empires Online can sometimes work fine for hours, then sometimes disconnect every now and then. Steam doesn't disconnect. Its more or less the same on any of our laptops. (all running Windows 7 64 Bit Home Premium or Professional)
View 2 Replies
ADVERTISEMENT
Nov 14, 2011
Have lost the instructions on how to connect my TRENDnet wireless router to my att DSL modem, not sure if I have all the cords that I need.
View 1 Replies
View Related
Jun 11, 2011
I have set up a wireless home network using ADSL with the following components: TrendNet TEW- 432 BRP Wireless Router Gateway Desktop with Windows 7 OS, iMac desktop with Leopard 10.5.7 OS Compaq Presario Notebook with Vista Home Premium OS Service Pack 2 I am able to connect to the network with all 3 but I have a problem with the Notebook. It is very slow to connect and sometimes takes 15 minutes or more to find the network. Once it is connected it works fine and doesnt disconnect, but if I have to reboot for any reason the same problem occurs. It does not appear to be a problem with the placement of the router and the signal strength which is "very good" to "excellent". I say "slow to connect (again)" because this had occurred before and I returned the laptop under warranty. HP replaced the wireless network card and it worked fine, but the problem has come back over a year later. I suspect that the card is not at fault and that the problem is elsewhere but I am at a loss as to what it might be.
View 14 Replies
View Related
Aug 29, 2011
Trying to connect my Dell Dimension E310 to my Linksys WRT54GS with a TRENDnet wireless N USB adapter. It sees the router, it connects, I show strong signal strength, but get a "limited connection or no connection" error back from the router...can't get on the Internet. If I use an Ethernet wire and connect it to the router, it can set up a wireless connection with the machine, I can unhook the hardwire, and I'm good to go. But every time I reboot, it won't connect unless I set it up with the hardwire first. Impractical.All other devices attached to the router are fine and connected to the Internet. How can I get the router to maintain the settings for this new connection so it will connect wirelessly when I reboot?
View 1 Replies
View Related
Dec 9, 2012
security key for trendnet router
View 1 Replies
View Related
Feb 4, 2011
I have just made a new home network with a Trendnet TEW-652BRP N router.I am trying to set up my encryption but I am confused on it. Under Security "Authencation Type" there is WEP, WPA, WPA-2, WPA-AUTO. What are these settings for and which do I choose for a home wireless net work?
View 3 Replies
View Related
Aug 21, 2012
My internet connection setup is: PC -> Trendnet 632 BRP wi-fi router (via Ethernet cable) - > D-Link DSL-2520U modem (via Ethernet cable, PPPoE) -> Internet. I have other devices connected to my Trendnet router via Wi-Fi connection (Notebook, PS3, XBOX, iPhone).My ISP gave me two DNS servers wich I have entered in my Trendnet. But when I look at the DNS tab in my D-Link I see two different DNS servers witch is not the same I entered in Trendnet.hey was set automatically when I created new DSL connection. I've also tried to leave the DNS adress tab as it was by default (0.0.0.0) in Trendnet router and after that my network still works normal. And when I look at the WAN status tab in Trendnet settings the DNS servers is set automatically to 192.168.1.1.So I have 3 questions for you:1) Do I really need to enter those DNS servers that my ISP gave me or I can just leave it to DHCP to manage them?2) If I have entered ISP's DNS servers in Trendnet then witch DNS servers is actually I'm using the ones my ISP gave me or the ones that my D-Link have picked automatically?
View 11 Replies
View Related
Dec 12, 2011
I have a new TEW-692GR router attached to an UBEE DVM3203B cable modem. For the last several days the WAN light on the router and the LINK light on the cable modem flash on a continual basis. This seemed to happen after establishing a wireless connection between a new LG smart tv and the router but am not sure if that in fact caused the issue. I have power cycled all devices on my network in an attempt to clear this up but no joy.
View 2 Replies
View Related
Jul 1, 2012
my acer laptop can detect my neighbour's wifi but cant detect my wifi which i connected today , my router is trendnet , it works perfectly in PC and my Phone can also connect to its wifi , but my laptop wont even detect the wireless network
View 5 Replies
View Related
Dec 30, 2012
I am trying to allow an external website access to my http://localhost:8080. It is a trusted website.
I have a ZyXel Q1000 modem and a Trendnet TEW-452BRP router. The TRENDnet is serving a PS3, Xbox, Wii, and 2 iMacs and the ZyXel is serving the TRENDnet.
My public IP for the ZyXel is 65.xxx.xx.152 and it's IP address is 192.168.0.1 with a range of 192.168.0.2-254 My TRENDnet IP is 192.168.1.1 and a range of 192.168.1.100-199
I have setup a Virtual Server on the TRENDnet using HTTP, Protocol TCP 80/80 and LAN Server 198.168.1.109 (my iMac localhost). I have also setup Application forwarding and Port forwarding on both the modem and router (at different times, trying to resolve this).
Naturally none of those worked. I don't know if I need a Port forwarded or Application forwarding or the Virtual Server. Also don't know if either of those need to be on one or both devices.
All I do know is to access my localhost from the Internet, all I need to do is put http://65.xxx.xx.152 in the address bar of a browser outside my network, and my modem/and or router should forward the request to my iMac and my localhost:8080.
But every configuration I have tried does nothing of the sort.
View 8 Replies
View Related
Apr 27, 2013
I have a Linksys WRT54G2 v1 router which is having a daily problem of connectiing to the Internet on my home wireless LAN. My temporary solution is to disconnect the power from the router for about 15 seconds and plug it back in .... and all is well.... at least for another day or so.The real problem is that instead of properly connecting to IPv4 address 192.168.1.100 ..... it randomly connects to Autoconfiguration IPv4 address 169.254.29.54 When this problem occurs the SSID list shows both my 192 connection as well as a public network with no Internet connection?
I've used this router for several years without a problem until I recently bought a new Canon wireless MG5320 printer which initially had problems connecting to my LAN. After a telco with tech support the printer works fine but now I am now experiencing the Autoconfig address problem.My LAN consist of the WRT54G router, a Motorola cable modem, a Lenovo laptop running Win7 64bit, a Hp desktop running Win7 64bit and the Canon wireless printer. (all connected wirelessly)
View 2 Replies
View Related
Jul 25, 2011
I have a HP G62 Laptop that's less then a year old (replacing a Dell we had for several years without problems) and a 2Wire router with ATT DSL that we've also had for years. Ever since we've had the new laptop we've been unable to use the wireless without problems. Periodically, (maybe once an hour or so) if the laptop is connected wirelessly it will make the router disconnect from the internet and cycle off. The router lights all go red, it cycles back on, green lights come on and re-connects.I've had ATT run a line test, had them send technicians here 3 times, they've gone through the house and followed the line to the box, trimming branches on the way. I've gotten a new router and I've tried a USB wireless adapter for the lap top. However, as soon as the wireless is disabled and it's plugged in by ethernet all of the problems go away. This would be fine if it was mostly used at a desktop but it's mostly used on the couch/around the house and the ethernet cables get in the way and keep breaking.
View 3 Replies
View Related
May 7, 2011
Im using an old tower with XP SP3. Most if not all drivers are up to date.I recently have come home from college where the computer connected to the internet through a cable and i now have to use wireless.I went out and bought a Trendnet TEW-648UB Wireless n adapter, installed it and tried to connect to my home network.It has been going from acquiring network address to no connection every ten seconds then repeating. I am fairly sure that this is not the router because i am on my sisters desktop which is a wireless connection and im on the internet. so far i have:
checked to make sure that WZC is enabled, it is.
tried checking and unchecking the Use Windows to to configure my wireless network settings
enabling and disabling my adapter
reinstalling my adapter
repairing connection
disabling any and all firewalls
ipconfig /release
ipoconfig /renew
netsh int ip reset reset.log
netsh winsock reset catalog
lots of computer restarting
and for good measure i pinged 192.168.4.1 and ping 24.229.54.212 not sure why but kinda frustrated so why not
here's the cmd stuff:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsFrost3>ipconfig[code]....
View 12 Replies
View Related
Aug 17, 2011
While I have been VERY happy using my DIR-655 for the most part, all wireless routers have limitations for expansion across your home.I got my TrendNet TEW-640MB installed last night, and it talks to the 655 perfectly, and now I have 4 ethernet ports at distance across my house. I have also used a couple TrendNet TEW647Ga single port wireless bridge for other parts of my home, but with only a single Ethernet port, you still need a little switch/hub to get the extra ports.
Because these units speak .11N at 300 Mbps, it takes full advantage of the technology the 655 gave me when I bought it back in 2009 (??).
View 5 Replies
View Related
Oct 29, 2011
When I start my torrent client (deluge) in short time computer disconnect from router. My I need to configure some settings on my wrt120n?
View 6 Replies
View Related
Feb 21, 2012
I've installed a Trendnet TEW-694UB wireless adaptor on my laptop and am trying to connect to my home network. I get a message "Acquiring network address" but it never connects.
View 5 Replies
View Related
Jun 19, 2012
I've had an E4200v1 in use as my home's main router for about 3 mos. And while many others have reported disconnect problems (I think), I myself have never seen any. My router and its N & G wifi networks have been rock solid. Until yesterday that is.Now all of a sudden, most of my family is complaining about wifi disconnects, slow speeds, etc. (My primary PC is hard-wired so I don't see any problems whatsoever... the problem apears to be wifi-only)And the Apple devices (OSX & IOS) seem to have the most severe problems. But Windows devices have also seen problems, just not as critical.Also, it's worth noting that I've been running 1.0.04 the whole time, without any problems... it seemed relatively stable to me. That is until yesterday.
I've bounced the router, I've disabled/re-enabled Wireless G network. I've switched mode from "mixed" to "G-only" back to "mixed". I've changed the channel width back to the default of Auto (I had been using 20Mhz), which increased my throughput (as measured by Qcheck) so I'm leaving it "Auto".
View 9 Replies
View Related
Aug 23, 2009
I just bought a WRT120N and at different times it will randomly restart and disconnect all the computer on my network I have 4 wired devices and 4 Wireless devices.
View 9 Replies
View Related
Feb 5, 2013
I am recieving error 619 (port for connection was closed) when trying to connect over my wireless connection. If I disconnect the WRT54G and hard wire to the cable modem I can VPN in without a problem. I have enabled IPSec / PPTP / L2TP on the VPN security tab and have reset the wireless modem.
View 4 Replies
View Related
Mar 6, 2013
I bought an EA 3500 refurbished through linksys. I can't configurate it using the CD-Rom. Always said "can't find your router". So I flash with the classic firmware, and it fixs the problem and automatically upgrade to smart Wi-Fi. That being said, whenever I plug in a portable hard drive, the router disconnect from internet after a minute. I tried my seagate HDD and also my flash driver. Both Lost internet after a minute or so. So I think it is probably the router's problem.
View 4 Replies
View Related
Mar 3, 2011
I recently downloaded the crysis 2 demo. But i disconnect 2-5 minutes into a game. I tried playing while directly plug into the modem and i can play as long as i want.
I am currently using the D-Link DIR-615 HW VER:c1 FW VER:3.13.Crysis is the only game with this problem at the moment. I have tried googling it but still won't work.I have tried to disabled my firewall+antivirus and i still disconnect.
View 3 Replies
View Related
Apr 10, 2013
i have a trendnet tpe-s44 switch and i need to reset it. it is installed in a network with a pos system, and i need to change the security from wep to wpa-2. i also cannot use the web interface to get to the login screen. from what i gather, it should be admin admin at 192.168.0.1, but the network it came from had a 192.168.5 scheme. i also cannot find a reset button, i even took it apart to look for jumpers. that sucks, i can configure a cisco from the command line almost in my sleep
View 14 Replies
View Related
Sep 17, 2011
I am an unlucky person who still has a belkin router. Not only do i have a belkin router, my PC is also connected via 2 switch boxes all ethernet cabled together in and around the house.
I am unable to forward and ports succesfully because after i have saved the settings i check it with a port checking site and it says they're all closed.
I have also been getting disconnected from my router when its under stress (Most recently playing League of Legends) but my Dad's Pc (Which is only connected to the Belkin) still stays connected and hasn't experienced any disconnections.
My router model is F5D7634-4 v2, DHCP is enabled but only my Dad's PC appears, UPnP is enabled but doesn't seem to work and my fireware is up to date.
I used to have a different router before this one which never had these disconnecting problems.
View 14 Replies
View Related
Feb 16, 2012
I bought Trendnet TEW643 PI wireless adaptor. I installed the software and inserted the adaptor to the slot as per the instructions. When I try configuring through wireless N client utility/ site survey, I cannot see any SSID.. I did try un--installing and re-installing and also driver update. but still of no use. I am not too much expert, but now I need to access the desktop in my office room. Item bought-Trendnet TEW-643 PI Windows Vista-64. Fibre broad band.
View 10 Replies
View Related
Feb 16, 2012
how i can install the device with a mac? bcause wizard setup work only with window
View 1 Replies
View Related
Apr 8, 2012
i have a Dlink DSL-2730U (an expensive, el cheapo router devoid of any functionalities, which also offers a way to connect to net as a side feature).basically i need to disconnect / reconnct pppoe without rebooting the router. but theres no button on the wan page for doing so.i noticed clicking on most of the buttons redirect to some non-html urls, like .cmd, .cgi etc, and some of them are common for many routers. e.g. on my router, "reboot" takes me to
[url]...
View 18 Replies
View Related
Mar 18, 2013
i have TP link router model no TD W8951ND.. i can access internet but wifi disconnects in every 5 mins.. i have to connect again but as soon as i got connection after 5 or 10 min it disconnects again..
View 1 Replies
View Related
Sep 12, 2012
Need to configure a TEG-S2620is switch (Trendnet) with VLANs I need to set TWO VLANs and make them communicate with eachother via the 802.1Q protocol. These are the details:
VLAN ID 102
Port 20 (802.1Q)
Port 21
VLAN ID 144
Port 20 (802.1Q)
Port 22
Port 23
Port 24
how to configure this setup on our switch?
View 1 Replies
View Related
Feb 25, 2011
I have a trendnet TEW-P1UG when I connect to it by wireless and I am able to click the test printer on the ip page, but I cant just print things?am I meant to link to the print server from my router? or from my pc that I wish to print from?
View 16 Replies
View Related
Feb 29, 2012
How to configure a TrendNet TEW-692GR to block/limit Facebook and other websites on one or all computers that access the wireless router.We homeschool and the boys are having trouble dealing with the distraction of social media while using their computers to get school work done.
I've tried listing FB IP address ranges (the 66s, 69s and the 204s) in Access Control and under IP Range Block Rules, and using the schedule page to set an access schedule. Everything looks reasonable but we can all still access FB. What am I missing? I think I found all the IPs for FB, maybe not? Not truly clear if the schedule is for times to block or times to access.
View 1 Replies
View Related
Sep 12, 2011
Recently my connection went haywire , it constantly disconnect and spike when there is 2 computers connected to the rounter but it works fine with 1 computer.contacted the ISP , they sent someone down just to change the modem but the problem still occurs[CODE]
View 9 Replies
View Related
Oct 17, 2012
We have a ZyXEL (P-2601HN-F1) router and three computers in our house. Currently, we only use cables to connect to the router because we haven't been bothered to setup wireless. However, there's a curious problem where the moment we connect more than 2 devices at a time, the router loses connection to the internet. To be precise, all LEDs are on, except wireless (d'uh) and Internet.
All involved computers run Win7.
View 1 Replies
View Related
Dec 18, 2011
I have not yet hooked up my router, N150. What I would like that after I hook the router up and then deside I don't want to use it. How do I disconnect it and go back to using my DSL modem and being connected to the internet?
View 3 Replies
View Related
