Trendnet TEW643 PI Cannot Recognize SSID
Feb 16, 2012
I bought Trendnet TEW643 PI wireless adaptor. I installed the software and inserted the adaptor to the slot as per the instructions. When I try configuring through wireless N client utility/ site survey, I cannot see any SSID.. I did try un--installing and re-installing and also driver update. but still of no use. I am not too much expert, but now I need to access the desktop in my office room. Item bought-Trendnet TEW-643 PI Windows Vista-64. Fibre broad band.
View 10 Replies
ADVERTISEMENT
Feb 25, 2012
I am having a LOT of trouble with an HP 6500A Plus wireless printer.It has been working wirelessly with my X2000 using WPA2 Personal encryption. (The WPA2 key has NOT been changed since it was working)It has recently stopped working and I cannot see why.All other devices (Wii, two iPads, 1 iPhone) all continue to work faultlesly.I have tried numerous times to reset the WPA2 security key on the HP Printer but each time it fails to connect to the X2000.It does recognize the SSID. But will not connect.I tried to turn on the LOG in the X2000 to see what information I could gather, but nothing get put into the Security Log. Maybe I am setting it up wrong, using "wireless" then "Log", then "enabled", then "view log", select "Security Log". attempt to connect from the HP Printer... twice, then refresh the log on the X2000, and NOTHING.
View 4 Replies
View Related
Dec 9, 2012
security key for trendnet router
View 1 Replies
View Related
Apr 10, 2013
i have a trendnet tpe-s44 switch and i need to reset it. it is installed in a network with a pos system, and i need to change the security from wep to wpa-2. i also cannot use the web interface to get to the login screen. from what i gather, it should be admin admin at 192.168.0.1, but the network it came from had a 192.168.5 scheme. i also cannot find a reset button, i even took it apart to look for jumpers. that sucks, i can configure a cisco from the command line almost in my sleep
View 14 Replies
View Related
Apr 23, 2011
I have just set up a wireless trendnet router. Everything is set up normal and its working correctly, it correctly assigns internal IPs to wireless devices. The problem is though that for some reason we all get disconnected in games for instance and some games more than others. Rift disconnects every 30 seconds to 1 minute, World of Warcraft disconnects often, Live Messenger disconnects as well, Age of Empires Online can sometimes work fine for hours, then sometimes disconnect every now and then. Steam doesn't disconnect. Its more or less the same on any of our laptops. (all running Windows 7 64 Bit Home Premium or Professional)
View 2 Replies
View Related
Feb 16, 2012
how i can install the device with a mac? bcause wizard setup work only with window
View 1 Replies
View Related
Sep 12, 2012
Need to configure a TEG-S2620is switch (Trendnet) with VLANs I need to set TWO VLANs and make them communicate with eachother via the 802.1Q protocol. These are the details:
VLAN ID 102
Port 20 (802.1Q)
Port 21
VLAN ID 144
Port 20 (802.1Q)
Port 22
Port 23
Port 24
how to configure this setup on our switch?
View 1 Replies
View Related
Feb 25, 2011
I have a trendnet TEW-P1UG when I connect to it by wireless and I am able to click the test printer on the ip page, but I cant just print things?am I meant to link to the print server from my router? or from my pc that I wish to print from?
View 16 Replies
View Related
Feb 4, 2011
I have just made a new home network with a Trendnet TEW-652BRP N router.I am trying to set up my encryption but I am confused on it. Under Security "Authencation Type" there is WEP, WPA, WPA-2, WPA-AUTO. What are these settings for and which do I choose for a home wireless net work?
View 3 Replies
View Related
Nov 14, 2011
Have lost the instructions on how to connect my TRENDnet wireless router to my att DSL modem, not sure if I have all the cords that I need.
View 1 Replies
View Related
Aug 21, 2012
My internet connection setup is: PC -> Trendnet 632 BRP wi-fi router (via Ethernet cable) - > D-Link DSL-2520U modem (via Ethernet cable, PPPoE) -> Internet. I have other devices connected to my Trendnet router via Wi-Fi connection (Notebook, PS3, XBOX, iPhone).My ISP gave me two DNS servers wich I have entered in my Trendnet. But when I look at the DNS tab in my D-Link I see two different DNS servers witch is not the same I entered in Trendnet.hey was set automatically when I created new DSL connection. I've also tried to leave the DNS adress tab as it was by default (0.0.0.0) in Trendnet router and after that my network still works normal. And when I look at the WAN status tab in Trendnet settings the DNS servers is set automatically to 192.168.1.1.So I have 3 questions for you:1) Do I really need to enter those DNS servers that my ISP gave me or I can just leave it to DHCP to manage them?2) If I have entered ISP's DNS servers in Trendnet then witch DNS servers is actually I'm using the ones my ISP gave me or the ones that my D-Link have picked automatically?
View 11 Replies
View Related
Feb 29, 2012
How to configure a TrendNet TEW-692GR to block/limit Facebook and other websites on one or all computers that access the wireless router.We homeschool and the boys are having trouble dealing with the distraction of social media while using their computers to get school work done.
I've tried listing FB IP address ranges (the 66s, 69s and the 204s) in Access Control and under IP Range Block Rules, and using the schedule page to set an access schedule. Everything looks reasonable but we can all still access FB. What am I missing? I think I found all the IPs for FB, maybe not? Not truly clear if the schedule is for times to block or times to access.
View 1 Replies
View Related
Dec 12, 2011
I have a new TEW-692GR router attached to an UBEE DVM3203B cable modem. For the last several days the WAN light on the router and the LINK light on the cable modem flash on a continual basis. This seemed to happen after establishing a wireless connection between a new LG smart tv and the router but am not sure if that in fact caused the issue. I have power cycled all devices on my network in an attempt to clear this up but no joy.
View 2 Replies
View Related
Jun 11, 2011
I have set up a wireless home network using ADSL with the following components: TrendNet TEW- 432 BRP Wireless Router Gateway Desktop with Windows 7 OS, iMac desktop with Leopard 10.5.7 OS Compaq Presario Notebook with Vista Home Premium OS Service Pack 2 I am able to connect to the network with all 3 but I have a problem with the Notebook. It is very slow to connect and sometimes takes 15 minutes or more to find the network. Once it is connected it works fine and doesnt disconnect, but if I have to reboot for any reason the same problem occurs. It does not appear to be a problem with the placement of the router and the signal strength which is "very good" to "excellent". I say "slow to connect (again)" because this had occurred before and I returned the laptop under warranty. HP replaced the wireless network card and it worked fine, but the problem has come back over a year later. I suspect that the card is not at fault and that the problem is elsewhere but I am at a loss as to what it might be.
View 14 Replies
View Related
May 7, 2011
Im using an old tower with XP SP3. Most if not all drivers are up to date.I recently have come home from college where the computer connected to the internet through a cable and i now have to use wireless.I went out and bought a Trendnet TEW-648UB Wireless n adapter, installed it and tried to connect to my home network.It has been going from acquiring network address to no connection every ten seconds then repeating. I am fairly sure that this is not the router because i am on my sisters desktop which is a wireless connection and im on the internet. so far i have:
checked to make sure that WZC is enabled, it is.
tried checking and unchecking the Use Windows to to configure my wireless network settings
enabling and disabling my adapter
reinstalling my adapter
repairing connection
disabling any and all firewalls
ipconfig /release
ipoconfig /renew
netsh int ip reset reset.log
netsh winsock reset catalog
lots of computer restarting
and for good measure i pinged 192.168.4.1 and ping 24.229.54.212 not sure why but kinda frustrated so why not
here's the cmd stuff:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsFrost3>ipconfig[code]....
View 12 Replies
View Related
Aug 17, 2011
While I have been VERY happy using my DIR-655 for the most part, all wireless routers have limitations for expansion across your home.I got my TrendNet TEW-640MB installed last night, and it talks to the 655 perfectly, and now I have 4 ethernet ports at distance across my house. I have also used a couple TrendNet TEW647Ga single port wireless bridge for other parts of my home, but with only a single Ethernet port, you still need a little switch/hub to get the extra ports.
Because these units speak .11N at 300 Mbps, it takes full advantage of the technology the 655 gave me when I bought it back in 2009 (??).
View 5 Replies
View Related
Feb 21, 2012
I've installed a Trendnet TEW-694UB wireless adaptor on my laptop and am trying to connect to my home network. I get a message "Acquiring network address" but it never connects.
View 5 Replies
View Related
Mar 20, 2012
I cannot install the drivers for my TrendNet TEW-423PI network interface card. I am running Windows 7 64-bit with an Intel i7 2700k and an Asus motherboard. I have tried installing with the card already in the computer - no luck. Card out of the computer install and then shut off and put in - no luck. The instructions that come with the card say that after you install the program that instantly runs from the CD provided you should shut off the computer and install the card and when you turn the computer back on the drivers will install automatically. It has failed to do so and although I pulled all possible drivers from TrendNet's site it still stubbornly refuses to even recognize that there are drivers for it to install.
View 2 Replies
View Related
Jul 1, 2012
my acer laptop can detect my neighbour's wifi but cant detect my wifi which i connected today , my router is trendnet , it works perfectly in PC and my Phone can also connect to its wifi , but my laptop wont even detect the wireless network
View 5 Replies
View Related
Dec 30, 2012
I am trying to allow an external website access to my http://localhost:8080. It is a trusted website.
I have a ZyXel Q1000 modem and a Trendnet TEW-452BRP router. The TRENDnet is serving a PS3, Xbox, Wii, and 2 iMacs and the ZyXel is serving the TRENDnet.
My public IP for the ZyXel is 65.xxx.xx.152 and it's IP address is 192.168.0.1 with a range of 192.168.0.2-254 My TRENDnet IP is 192.168.1.1 and a range of 192.168.1.100-199
I have setup a Virtual Server on the TRENDnet using HTTP, Protocol TCP 80/80 and LAN Server 198.168.1.109 (my iMac localhost). I have also setup Application forwarding and Port forwarding on both the modem and router (at different times, trying to resolve this).
Naturally none of those worked. I don't know if I need a Port forwarded or Application forwarding or the Virtual Server. Also don't know if either of those need to be on one or both devices.
All I do know is to access my localhost from the Internet, all I need to do is put http://65.xxx.xx.152 in the address bar of a browser outside my network, and my modem/and or router should forward the request to my iMac and my localhost:8080.
But every configuration I have tried does nothing of the sort.
View 8 Replies
View Related
Aug 29, 2011
Trying to connect my Dell Dimension E310 to my Linksys WRT54GS with a TRENDnet wireless N USB adapter. It sees the router, it connects, I show strong signal strength, but get a "limited connection or no connection" error back from the router...can't get on the Internet. If I use an Ethernet wire and connect it to the router, it can set up a wireless connection with the machine, I can unhook the hardwire, and I'm good to go. But every time I reboot, it won't connect unless I set it up with the hardwire first. Impractical.All other devices attached to the router are fine and connected to the Internet. How can I get the router to maintain the settings for this new connection so it will connect wirelessly when I reboot?
View 1 Replies
View Related
Aug 26, 2012
Is it possible to assign a single ssid to multiple interface groups by assigning the ssid to multiple AP groups?
I have buildings geographically dispersed that are configured with multiple vlans in interface groups so that I can maintain an addressing scheme of dhcp assigned addresses per building. Each building is also further grouped as AP groups. I'd like to know if by assigning the same wlan ssid to each of the AP groups, will I maintain addressing integrity for each building? I'm thinking it will work.
Do the buildings have to be outside AP range of each other to avoid problems?
5508 controller
7.2.110.0 code
6 buildings
6 interface groups
1 ssid
View 4 Replies
View Related
Feb 15, 2012
I am running windows xp sp2 on a pc, a wireless modem 2wire model 2701hg and a laptop with windows vista. My pc had a virus that required reinstalling windows xp. When I did that my pc came up with an ethernet connection instead of reconnecting into the wireless network. I cannot get the pc back into the wireless network with the limited knowledge I have. When I look at my "system summary" on the 2 wire website I can see my pc listed twice, once with the ethernet connection and once with the wireless connection but labeled "inactive". How do I get my pc back onto the wireless network?
View 12 Replies
View Related
Nov 26, 2012
I can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7
View 11 Replies
View Related
Oct 18, 2012
I have a toshiba satellite p25-s520 and running windows xp sp3 and I cant figure out how to get it to recognize a wifi setup?? I called toshiba and went through explaining and she said it was a configuration issue and she was going to put me through to her tech so he could fix this remotely and last minute she said i had to purchase a warranty, i said ill figure it out on my own,
View 5 Replies
View Related
Nov 13, 2012
I just got a laptop from my mom, and the dang thing doesn't recognize any networks!
View 5 Replies
View Related
Mar 22, 2011
The main computer received a virus and I had to reinstall the operating system. When I did, however, all settings disappeared. The lights on the modem and router are fine, and the secondary computer has full access to the Internet. I also can use my Wii with the Internet. I tried setting up the router again but the main computer won't load the web-based configuration utility page. The secondary computer, however, can. I tried plugging the modem directly into the computer but the computer didn't seem to recognize it either. I bought a new router, thinking if I got software it would automatically set everything. However, the router I received came with zero software. I plugged it in and the computer still couldn't connect to the config page. I am at a loss as what else to do here.
My old router is a Motorola WR850G and my new one is a Netgear WR614 v9. Either would be fine to use, as long as I can get both computers to connect. The host computer has XP and the secondary Vista.
View 2 Replies
View Related
Oct 18, 2011
I am able to use the lap top but not my desk PC.Browser keeps "failing" to recognize the DNS ? or my ports are blocked by a previous firewall ?
View 19 Replies
View Related
Apr 25, 2012
I just formatted my hard drive and now I cant connect to the Internet. I think it has something to do with the drivers for my network adapted.
View 2 Replies
View Related
Jan 1, 2012
I have an IBM R-40 thinkpad that I restored to original with the IBM icon and then updated it to a service pack 3 and updated anything that popped up. Now it doesn't recognize any wireless at all. I tried the FN,F5 still no luck. It has a INTEL card, Model WM3B2100 in it and it worked fine before the restore and update.
View 1 Replies
View Related
Dec 6, 2012
i have an ACS Appliance 5.x but the LMS 4.2 doesn't;t recognize it as Cisco device , and give him the sign ? how to make LMS 4.2 recognize it as acs
View 3 Replies
View Related
Jul 28, 2011
I have no ethernet connection showing in my internet connections.I have a foxconn K7S741MG-6L motherboard. It was working fine but when I was forced to do a format recently I have no internet access.
View 5 Replies
View Related
Sep 2, 2011
Have followed directions for changing password and retrieving password but get 'do not recognize username maryjaneohlson@gmail.com'n I am receiving email but can not send.
View 1 Replies
View Related
