Inspiron 8200 - Why Does Laptop Keep Dropping Signal
Oct 27, 2011
I have an older Inspiron 8200 with XP I'm trying to fix up. I added an internal 802.11g card and it connects to my wireless network just fine. For some reason the connection only stays open for about 10 minutes or less and then it disconnects. If I try to reconnect to my network it works, and then the same thing happens again.
It doesn't do this when I plug it into a wired LAN. It does do the same thing when I try to use a wireless USB or PC card adapter.
why it keeps dropping the connection? And why it won't automatically re-connect? The laptop is very near to my router so I know I'm getting a good signal. Other laptops work fine with the router.
View 4 Replies
ADVERTISEMENT
Dec 18, 2008
we just reinstall window xp because of some viruses. now that we put in our wireless notebook card window xp say ' Found New Hardware'
and under Hardware, Device manager, it pop up a yellow question mark and it say ' Ethernet Controller'. we already install the chipset driver and the 3com in the dell download pages for the 8200. i read some where that the 8200 come with the broadcom bcm5701 ethernet controller but im not sure.
View 15 Replies
View Related
Apr 5, 2013
I never had this problem with my old HP. I trade stocks as a hobby and when it drops wifi it takes 30-40 seconds to reload.
View 1 Replies
View Related
May 14, 2013
I have a Tenda router and Realtek USB wireless adapter. My 8200 has XP svce pk3. The adapter will not stay connected. Some times it shows connected with 100% signal strength and after few seconds drops out. I cannot find any radio switch on this laptop. Fn/F2 does not work and there is no mention of wireless in the bios settings. I feel that the radio is not switched on but how do I do this?? Is my configuration incorrect?
View 3 Replies
View Related
Feb 14, 2011
i am on my 4th router but still dropping signal to laptop. if I unplug the router and plug back in it works. but not for long. am getting very upset.
View 3 Replies
View Related
May 16, 2013
A few days ago I received my DIR-655 I ordered off Amazon and hooked it up. There were no problems the first day after initial setup. The next day I noticed that I was losing internet connection even though the wifi indicator on my laptop said otherwise. This happens for about 5 minutes at a time and on other devices such as my desktop and my iPad. And I hopped on Call of Duty last night and played a competition with some friends and gave everyone 4bar connection. Later that night, I was playing some more and people that connected to me received 1bar connection and I got that in return on their connection. I feel that the router isn't working with my devices right?
View 4 Replies
View Related
Jan 16, 2011
I am using Dell Inspiron 1525, 2008 model with a 1395 WiFi Mini card. The signal strength I get is very low, whereas people in the same location get good strength with other laptops like Sony etc.Is there any way of improving the signal strength without disturbing the router/modem, like some software/ hardware changes in the Laptop. Dell havent answered yet.
View 2 Replies
View Related
Mar 28, 2012
We have a home network which consists of one Motorola wireless router and 3 PCs. Two of the PCs connect directly to the wireless router without any issues, however, my PC dosent have a built in Wi Fi card so am using a TP Link wireless N USB adaptor.... so as you can imagine the signal is still very poor. So I have bought a TP Link AP and have it set up in repeater mode to increase the range of the router and thus improve my connection.
Now this works great in the short term as I get full signal, but the problem is the signal tends to drop out every 20 mins or so.Now, originally we were recieving an IP address conflict message which I thought was causing these drop outs, but I have rectified this by using MAC address filtering on the AP (think the AP was connecting to someone elses PC in our block of flats), but the drop outs still continue.
I have a static IP set on both my PC and AP and DHCP enabled on the Motorola router, I have also tried changing the Motorola's channel and moving the AP to different places but the story dosent change.I am a right noob when it comes to networking and have got this far by reading manuals, google searching and trail and error so dont know what else to do.
View 6 Replies
View Related
Jan 12, 2012
I have a Dell Studio 1745 Laptop and its only a few years old, I recently upgraded my router to be wireless a year or so ago and have had a few d/c issues here and there but mostly has not been a problem.Recently I have had tons of d/c issues while playing warcraft or browsing the internet in general, anything really.So I made the mistake of recently updating my WNR1000V3 router's firmware from my laptop's wireless connection. After I did this I saw all sorts of warnings (none built into the firmware itself, sigh) that this was a big no no.
Since then my d/c issues have been horrible but what it does now is my connection will be completely normal then all of a sudden my wireless access point will switch to 'No Internet Access' and it will drop my internet.The only way I can get it back is to go into the other room and reset the router by either unplugging it, or pressing the reset button on the back, once it reboots and everything, my laptop sees the connection again, and it has Internet Access fine.Soo I went and made the problem much worse, the lame part of the situation is before I had this firmware issue I was getting this problem anyways.
I decided if I could flash a older version of firmware to the router using my desktop that is wired to the router I could then reupdate it to the current version,I found a old firmware version on netgear.com and went to upload it through the router login for my router, it then said the file format was unrecognizable or not the right one (it was a .img file). I even tried to mount the file and explore it, no go. I found another firmware version older than that and attempted to flash that to the router and it began to update, then gave me a warning that this firmware was older than my current, I click yes and my internet drops and the update never happens.
So if I did screw the modem up this way I have no idea how to fix it now I have reset it to factory settings but this doesn't affect the firmware version. I suspect the firmware has something to do with the recent problems because I have seen the 'Congratulations, You have setup your router and are connected to the internet" like 20 times these past 48 hrs.I downloaded Xirrus wifi inspector and have it running now.I tried the ip flush and release stuff, and a bunch of tricks ive seen on other forums.My system is Windows 7 with a Intel wi-fi link 5100 AGN network adapter. I have tried rolling back that network driver and messing with the advanced and tcp/ip settings.
View 14 Replies
View Related
Apr 12, 2011
My linksys never dropped a wireless signal in four years of use, this one has dropped 3 days straight.Dunno about the wireless part of the router; Terry, etaf, any input on the quality of this router?
View 2 Replies
View Related
Oct 29, 2012
Our house is located up a hill and a long way (1,400ft) from the main road and we always have problems with the signal dropping on our cable internet connection. According to the line tech's that have been to our house the problem lies with the 20+ year old cable that is being used to get the cable signal from the road box to the house
I am wanting to replace that cable but from what i have read so far is that cat 5/6 cannot go the distance i require
I have looked into going with a long range wi-fi but there is no direct line of site from the road to the house and there are a million tree's in between us and the road so its not really practical .we are not needing any major amount of speed, just enough to do surfing, streaming, and the kids like to do multiplayer gaming. 7-10mbps would be great for us, before we started having problems with the cable we were only getting 4-5mbps and that was enough for what we needed
View 5 Replies
View Related
Jun 15, 2012
My wife, daughter, mother and I recently moved into a place together. Since moving in together, our internet connection has been less than reliable. We use a motorola modem and a DLink DIR615 router. I have a desktop with a wireless card, and my mother has an all in one with a wireless card, so we both connect wirelessly to the internet. We also use iPhones and a PS3 for internet purposes. The DLink is my router from my family's old place before moving with my mother. The motorola modem is my mother's from her place. Prior to sharing a household, I never had a problem with the router dropping signal. She, however, did have a problem with it. She was using the motorola and a netgear router. So, with that out of the way, here's what happens. The internet works fine and the network shows as available, but then suddenly the internet just goes out in all areas of the house. The network no longer shows as available. It's fixed by unplugging the router for about 10 seconds and then plugging it back in. I've tried talking to DLink about it, thinking it was a problem with the router. They even sent me a replacement router because we couldn't figure out the problem, but even with the new one it's still happening. I can also add that while we were waiting for the replacement, we connected my mother's Netgear and it continued happening. When the new DLink came, I confirmed that the router has the latest firmware as well, just in case. I can add that since sharing a network, we've been getting an IP Address conflict message on both computers. We both have Windows 7. Can anybody shed some light on this? I have some knowledge of this kind of stuff but what's happening is way beyond my scope.
View 7 Replies
View Related
Jan 17, 2012
I have D-Link Amplifi N+600 Dual Band wireless router (Model: DIR-827) that was purchased a couple of months ago. I live in a house with a bunch of other university students so I would estimate we have about 18 devices that connect to the router such as laptops, mobile phones, and gaming systems. Every few hours our wireless router will just stop working and drop everyone's connection including the connection to the wired Ethernet ports. The light which is normally green on the front of the router turns yellow and will stay that way until the router is reset. The network still shows up on all the devices with full signal bars but no access.
View 1 Replies
View Related
Jan 6, 2012
I have installed a WRVS4400N router in a client's office. When laptops are plugged into the router everything works fine. When they are attached via the wireless signal it drops frequently. WPA personal is being used to encrypt. I have also installed the latest firmware and am having the same results. What can be done to eliminate the drops?
View 10 Replies
View Related
Jun 18, 2012
I have a D-Link DIR-655 version B1 Just installed firmware 2.03 Use a cable modem (Comcast) Motorola SURFboard model SB6120 Am trying to use Netgear 85Mbps Wall-Plugged Ethernet Adapter XET1001 to carry signal from the room where the cable modem is to another part of the house where I hope to connect the D-Link.
View 14 Replies
View Related
Mar 28, 2012
I just bought and set up an E2500 wireless router this evening. Using the default settings (as applied by the Cisco setup CD), I was experiencing pitiful range, with signal dropping to 2 out of 4 bars just one room (about 20 feet away). (Previously, using the exact same physical setup with the same computer and a single-band Belkin n150 router, I always had 4 out of 4 bars in that room).
I entered an online live tech chat, and after some back and forth, the tech rep had me change the settings as follows:
(1) Rename the SSID to separate the two bands: One network SSID for the 5GHz band, another for the 2.4GHz.
(2) Turn off auto-channel for both networks: Set 5GHz to stay on channel 36. Set 2.4GHz to stay on channel 1.
(3) The 5GHz is set to use 20/40 MHz width, while the 2.4GHz is set to use only 20MHz width, but I believe those were the defaults already in place.
Then he promptly ended the chat, so we didn't get to finish. Nonetheless, with these settings in place, I am now getting a steady, uninterrupted 4 bars in the next room, using the 5GHz network SSID. Because we were disconnected, I have a few questions remaining:
(1) Is it normal to get such terrible range using the default settings (that's make for a lot of unhappy customers and a lot of extra calls to tech support)? Or does this indicate a problem with my router? (This was a Cisco certified refurbished model)
(2) Which change 'fixed' the problem: Was it separating the two bands into different SSIDs, or locking the channels rather than using Auto channel?
(3) Was this just intended as a test to troubleshoot the problem, or am I supposed to leave the router configured this way? (Since we were disconnected, I didn't get to follow up with the tech rep after changing the settings.) With it configured this way, I'm connecting devices that can find the 5GHz network to the 5GHz network's SSID, and the other devices that can't find it, I'm connecting to the separate SSID for the 2.4GHz network. Seems unnecessarily messy to have 2 SSIDs.
View 4 Replies
View Related
Jan 24, 2012
I have a pci wireless card that I have been using with the same router for some time. All of a sudden in the last couple of weeks it suddenly developed some habbit of dropping the signal from the router on random intervals. During the times that it does it, it will do it over and over again for hours sometimes.It will connect, then drop off less than a minute later, then reconnect again. It will just suddenly say "No Connections available",when normally there are at least 3 connections displayed in the list(2 neighbors and 1 mine).
I am using Windows 7 64 bit and I just now did a fresh reformat on the hard drive an hour or so ago to try and rule out the option of conflicting software/drivers/malware and so on. The problem seems to be persisting still.I have the latest drivers that I can find for my card and updated firmware on the router(same exact setup I have always used).
View 1 Replies
View Related
Jun 20, 2012
My E2500 Linksys has never been consistant with its signal to my MacBook Pro.
View 8 Replies
View Related
Nov 24, 2011
I have Linksys WRT160N v2 wifi router that I have been using for over a year now, till two months back I was very happy with the router, speed was good without any signal issues though in last couple of weeks I have noticed that the router has started to create problems like the browsing will stop it self for a few seconds without any reason (specially I notice this when I am on youtube playing a video that will stop after 2 or 3 minutes).
View 7 Replies
View Related
Jan 27, 2012
My WRT400n has started dropping the wireless signal 4 to 5 times a day. Somet times it fixes itself but most of the time I have to re-boot the router to connect a wireless signal.I looked for a firmware upgrade but there hasn't been one since 2009.
View 4 Replies
View Related
Jul 9, 2013
I have a Dell for a year(INSPIRON N17110) with adapter:Dell Wireless 1702 802.11b/g/n. All time it has a low signal via WI-FI. Signal 5-10 times less than in other notebook (for example Lenovo). Even next to the Router signal is 3-4 times less.
View 8 Replies
View Related
Dec 26, 2012
My old WRT54G V8 router has been acting up lately. It keep dropping the connection out of the blue. Sometimes I'd be browsing the Internet when the router's signal vanishes completely, it disappears from the list of available wireless networks on not just my computer, but my smartphone and all other devices in the household! Other times I keep connected to the network but there's no access to the Internet. Everything seems fine on the ISP's part, I can connect just fine directly from my modem, so I'm certain the problem is with the router. Besides, these problems are solved by just power cycling the router.
View 4 Replies
View Related
Jan 11, 2013
my dell laptop just brought 2 week ago, but network keep dropping, it using windows 8, and it this the problem with the router ? it need update or something? I using d-link dir-615.but it all right with my another computer, but it using windows 7. my laptop need to troubleshooting ever time I use it, and the troubleshooting result show the problem with access point, reset the adapter, and the default gateway. it frustration in the middle of network running.
View 8 Replies
View Related
Jul 8, 2013
i am having low signal strength on my laptop . only 2 bars are shown on strength meter . wifi router is just 3 meters away . my roommate has hp elite book and his signal strength is always full.
View 1 Replies
View Related
Feb 5, 2012
Is something from computer inspiron 530's vista intel pentuim dual core blocking my signal from my wirless usb adapter netgear n300 wna 3100 from going on line? seems to work on other computers in the house that isnt dell..
View 1 Replies
View Related
Sep 14, 2011
I have a Dell Inspiron 1525. At home wired/wireless internet works perfectly. At school I have to keep the laptop, wired because the wireless signal isn't strong enough. I have a brand new ethernet cable and have tried others and for some reason my internet always loses connection after a few minutes. It works as soon as I unplug the ethernet cable from my laptop and plug it back in, but then fails again shortly after.When I try diagnose and repair, it says I need to reset the network adapter, and when I click on that option it starts working again for a few minutes but loses connection shortly after.
View 15 Replies
View Related
Dec 25, 2012
I just got a brand new laptop (Windows 8) for my girlfriend as a Xmas gift and I'm having issues with the wifi signal.
If I stay near the router, no problems. But if I go 10-15 feet away, then the signal is almost inexistant... 1 or 2 bars. 20 feet away then it's 0 to 1 bar and losing connection.That router never gave us any problem before. Another laptop (Inspiron 1525 on Vista) is running correctly with a good signal just besides. An HP is also working fine at the same location. And 2 other ones as well... (Yes I know I have many PCs... ;)
I installed the latest drivers for the Belkin router just in case it's due to Windows 8 but that ain't fixed the issue.
View 19 Replies
View Related
Apr 11, 2013
I recently bought a new Inspiron 15R Special Edition less than 3 weeks ago. It has recently started playing up with the internet. I've reset the router, and deleted and reconnected to the internet connection but it has stayed the same.
I have also been having problems with some computer programs. McAfee and windows threat both decided to shut down along with the firewalls. The security seems to be up and running now but my firewall doesn't seem to want to turn on.
View 4 Replies
View Related
Jun 28, 2010
I have a brand new Dell Inspiron 1764 laptop that I received on the 25th of June. It is "replacing" a Dell Inspiron 9100 that has gotten to be too slow and bulky for my needs. For support purposes, both laptops are running on Windows 7.Overall, I love my new Inspiron 1764. However, I have noticed seriously degraded connection/signal strength with the wireless card (Dell Wireless 1397 WLAN Mini-card) compared to my Inspiron 9100 (Dell Wireless 1350 WLAN Mini-PCI card).
In areas of my house that my 9100 can get full signal strength (5 bars), my new 1764 is getting 2 or fewer bars. This behavior is also not limited to only my house, as I have tested it at my job and in an area less than 10 feet away from the wireless router, I have "Internet connectivity problems".
I tried twice this morning to speak with Dell support. The first person I spoke at least initiated a DellConnect session with me so that they could check some of my settings and such (however, why they went twice into my sharing settings I could not determine since they have absolutely nothing to do with signal strength.)
Unfortunately, I was disconnected from the session when I went to an area that had less signal than right next to my wireless router.I then got back on chat support with Dell and received another technician to speak with. I explained my problem, told them that I was in a DellConnect session with the other technician, and they looked up my support contract.They then told me that my warranty does not cover software issues and referred me to the software department and told me it would be an extra charge. I told them that I did not believe it to be a software issue in any way, shape, or form. They told me that it must be a setting issue. I have since spent several hours scouring the internet forums on Dell and other websites checking people who have had similar issues. Some of their issues were admittedly from software settings, but I have still yet to find anything that indicates to me that I have an incorrect software setting.
As of this writing, I am standing in my kitchen, typing on my Inspiron 9100 with a full 5 bars, while my Inspiron 1764 sits next to me with a measly 2 bars, and I am literally standing 7 feet above the room that houses my Linksys WRTU54G-TM router.Personally, I suspect a faulty wireless card, but how do I convince Dell to hear my case and replace it rather than trying to bilk me for unneeded software support?
View 16 Replies
View Related
Mar 31, 2012
I just bought new Dell Inspiron n4050 Laptop " Dell Wireless 1702 802.11b/g/n"the wireless signal tooooo weak near the router (less than 10 cm ) !! and i have dell inspiron n5010 and the signal is too strong !
idk if that hardware problem or soft !the driver software is R302726
View 2 Replies
View Related
Mar 17, 2012
For the past week my laptop will just drop the internet for some reason... it says the signal is strong and that it's connected but it won't load browsing pages and my IMs don't get sent and I don't receive any. This is becoming bothersome as it happens off and on constantly.
View 1 Replies
View Related
Aug 30, 2012
I have a Gateway Laptop that knocks out my att dsl connection randomly. It happens when it is connected by wire or wireless. I have other devices that use the the internet connection without any problem including an ipad, cell phones, and wireless tv's. They all connect and the signal never gets interupted, but when I use my gateway laptop with in a few minutes the I start losing signal randomly. It does lock back on but usually continues to in and out.
View 1 Replies
View Related
Sep 19, 2011
Everytime im on the internet or playing internet games my internet drops a signal bar which causes the webpage or game to freeze. However there is also 3 other laptops in the house and none of them lose signal when i do.
View 1 Replies
View Related
