Internet Drops When Desktop Boots?
May 26, 2011
Internet connection fails when desktop boots?I have a wireless internet router/modem. Netgear.The internet works fine via wireless for laptops, phones etc.Until i boot my desktop up that is connected via cable to the router it then drops the internet connection.The network is still showing as active but local only.If i open a browser it tells me that it cannot resolve the DNS server.if i switch the desktop off and reconnect the laptop it works.So its not the laptop or the router i have used a few different cables all the same.I'm using XP on desktop fairly fresh install with AVG antivirus and not much else on it but i have had the internet working since install so its some setting somewhere thats changed or needs setting up again.
View 9 Replies
ADVERTISEMENT
Jul 18, 2011
my internet connection drops out as soon as i power on my desktop. i have tried with 3 seperate modems my original modem a brand new modem and a mates modem and all 3 show the same problem when the desktop is off the internet connection is fine, i was wondering if this is just an EM surge
View 1 Replies
View Related
Oct 19, 2012
Just recently we replaced our HQ Cisco-Pix with Cisco-ASA 5510. where we have many branches connecting to our HQ through site-to-site vpn. Since putting this new ASA5510 at HQ , while we are getting a Remote-Desktop session into our branches clients, and at the time when even a single TIMEOUT occurs on the vpn-link so the remote-desktop session gets completely lost. then we have to re-connect the session.This issue happens as i said above when a single timeout occurs on the vpn link. What is the issue with the ASA5510. because with pix we didn't have this issue, remote-desktops were never getting lost / reset with single timeout
View 1 Replies
View Related
Oct 17, 2012
Just recently we replaced our HQ Cisco-Pix with Cisco-ASA 5510. where we have many branches connecting to our HQ through site-to-site vpn.
Since putting this new ASA5510 at HQ , while we are getting a Remote-Desktop session into our branches clients, and at the time when even a single TIMEOUT occurs on the vpn-link so the remote-desktop session gets completly lost. then we have to re-connect the session.
This issue happens as i said above when a single timeout occurs on the vpn link. What is the issue with the ASA5510. because with pix we didnt have this issue, remote-desktops were never geting lost / reset with single timeout
View 1 Replies
View Related
May 9, 2013
I have an 887VA-K9 which boots into ROMMON mode every time. It seems to have 3 tries at booting, then fails.
The entire console output from power-on is (blank lines removed):
System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 2009 by cisco Systems, Inc.
[Code].....
View 3 Replies
View Related
Apr 16, 2012
I'm finding some odd information from Cisco pages and non-Cisco pages also. What is the correct syntax for specifying boot images on a flash:/ of a switch? The differences is if you need the "/" or not as well as after the ";" fo you need to specify flash again.
View 2 Replies
View Related
May 9, 2011
Our cisco asa 5510 getting sometimes boot and sometimes not. sometimes LED on port comes back if boot and sometimes not. what are the parameter should be check to rectify problem.
View 3 Replies
View Related
Mar 4, 2012
we have 55 of the 1841 routers here, and one of them always boots to ROMMON from a very cold (down 1 hour or more) start. The image on all 55 is c1841-ipbasek9-mz.124-24.T4.bin. 32 MB Cisco brand flash. Here's what's been done thus far:In ROMMON changed to 0x2102. Then 'reset' and the image boots fine. Change config-reg to 0x2102. Save config. Reload and image boots fine again. Wait an hour or more and boots to ROMMON.Boot from ROMMON to USBflash0: Format the CF then copy over the bin file. Change to 0x2102 and save. Reload and image boots fine again. Wait an hour or more and boots to ROMMON.Swapped CF with another unit. Again, works fine to reload, but shut down and restart an hour or more later and boots to ROMMON. Format this CF and copy over image while on router. Image boots fine. Wait an hour or more and boots to ROMMON.In each case of very cold start the configuration register has reverted to 0x0 {why it boots to ROMMON}Tried dx mode with 0x8001. Nothing seen that is unusual to me, but I'm not an expert by any means.It doesn't seem to a CF card problem, but could be a connection to the CF card and then something behind that.
Here is the output of diagnostic boot mode:
Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.
Processor board ID FTX1231W0JA
2 FastEthernet interfaces
2 Low-speed serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
[code].....
View 7 Replies
View Related
Jul 17, 2012
I have a lightweight AP that boots into RoMmon, if i hold the reset button in for 10 seconds or so it will boot into the IOS and download the config from the controller but never registers. then once i reboot it it goes back to Romon unless i hold in the button again.
View 5 Replies
View Related
Aug 6, 2011
I have just downloaded new software for sge2010p. I had tried to made an upgrade on some switches, but switches still boot with the old software.I have installed software 3.0.0.18 and boot 2.0.0.03. I have downloaded software 3.0.1 from cisco, put it on tftp and started an upgrade via switch web interface. I have checked that the active image is set to 1, and started the upgrade.Switch has downloaded soft from tftp, and reported that process has been finished without errors.After the restart switch have 3.0.0.18 software again. I have try to do this same on 4 different switches working in L3 and L2 mode - always with the same effect.Should I upgrade both images in the same time to get this work?
I have noticed, that the new firmware is located on image 2.
# show bootvar
Image Filename Version Date Status
----- --------- --------- --------------------- -----------
1 image-1 3.0.0.18 08-Nov-2009 16:21:37 Active
2 image-2 3.0.1.0 19-May-2011 13:05:53 Not active*
[Code] ...
So I try to set active image via console command:
# boot system image-2
and again...
a# show bootvar
Image Filename Version Date Status
----- --------- --------- --------------------- -----------
1 image-1 3.0.0.18 08-Nov-2009 16:21:37 Active*
2 image-2 3.0.1.0 19-May-2011 13:05:53 Not active
"*" designates that the image was selected for the next boot
Finally i have tried to set the active image to "2" using console menu: I have set it like this:
Active Image
============
Unit ID Active Image Active Image after Reset
======= ============ ========================
1 Image 1 Image 2
and save..
[Code]
Where is the right place to set active image for 2. Is the "active image" settings only sets the firmware image which switch uses or configuration files too?
View 5 Replies
View Related
Dec 8, 2011
Base ethernet MAC Address: 00:0a:b7:07:35:80Xmodem file system is available. The system has been interrupted prior to initializing theflash filesystem. The following commands will initialize the flash filesystem, and finish loading the operating system software:
flash_init load_helper boot switch: flash_initInitializing Flash...flashfs[0]: 3 files, 1 directoriesflashfs[0]: 0 orphaned files, 0 orphaned directoriesflashfs[0]: Total bytes: 3612672flashfs[0]: Bytes used: 1815040flashfs[0]: Bytes available: 1797632flashfs[0]: flashfs fsck took 3 seconds....done Initializing Flash.Boot Sector Filesystem (bs:) installed, fsid: 3Parameter Block Filesystem (pb:) installed, fsid: 4ô
View 1 Replies
View Related
Dec 27, 2012
Got a long lingering, year long issue that has spanned about 8 supervisor cards and a complete chassis swap. The 6509 acts as a ITN in our facility. The active sup card at random points of pipe usage boots into rommon mode, seriously inhibiting our company. I'm able to swap the 2 fiber pairs that we had going into the active supervisor card into the secondary and usually this works for another random amount of time, however, today it occured within minutes of hooking up the fiber links. Sitting there for about 5 minutes it booted into ROMMON. When this happens, I'm able to boot the sup card back to good status. Previous remedial actions, other than replacing sup cards/chassis, was checking the config register and making sure it was x2102. Previously, it was not, and we corrected and reloaded and it took, we thought this would fix the problem, until today.
[code]....
View 5 Replies
View Related
Apr 3, 2013
I was in the process of recovering a password on a nexus 5548 swith when it finally gets in to the boot mode.I think i lost all my bootloader code.How do i get it back on the switch
loader> load n5000-uk9.5.0.3.N2.1.bin
Error 27: Unrecognized command
how to restore my IOS on this device
View 1 Replies
View Related
Oct 24, 2012
I'm fairly new to networking and need to migrate an old core to a new core. I have a 6509-e Switch that I had an RMA on one of my 720 sup cards. After receiving the sup card I swapped my slave out with the new one, expecting it to boot into ios. It booted into Roman. I tried to boot the image manually and it did the same thing. I also tried to boot from my flash and, again, booted into ROMmon.
Question: If i configure and change the boot to boot from image it tells me i need to reset or power cycle first. Will this reset the entire switch? As this is production I'd rather not.
I am at home now, but I can supply any logs/hardware model/configs tomorrow. I thought I would see if this is an easy fix.
View 23 Replies
View Related
Jul 27, 2009
I m having 2500 series router. when i boot router automatically get into router(boot)> . how to solve?
View 6 Replies
View Related
Jul 3, 2011
My computer is on a direct connection with a docsis 3 modem - with service provided by Comcast. I had no problems with the internet for about a month after signing up with Comcast at 6Mbps. Then out of no where the internet began to drop out whenever in use. When the computer is connected to the internet, and I am not actually using "bandwidth" the connection stays connected, all day with no blips. But when I try to access Youtube or some other site they demands bandwidth it drops out. Comcast has sent out 7-8 Techs to troubleshoot the issue to no avail. They have replaced the modem 3 times, the ethernet cable (is that the right word?) has been replaced, and Comcast cut holes into my walls to re-wire the entire building. I just had a guy leave from Comcast, and when he hooked up his laptop to this modem he had absolutely no problem. Then he hooked up a router, and we both used direct connect to get on the internet, and as long as his computer was connected the signal was strong with no blips. We removed his computer and the connection dropped within a few minutes. Comcast says they have verified the integrity of all their equipment, cables, splitters, main line, ect...I even tried backing up my machine and reformatting it and I still have the same issue. I've always been good about not getting virus or spyware. I have no idea why only my PC won't stay connected to the internet. Oh, also the Comcast tech hooked up a meter to the cable line and he says when the internet drops out on my end that the cable signal is still strong with no blips. When the modem goes out all the lights drop out and it has to re-identify, then it comes back up for a few minutes, only to spiral down and disconnect.
I live in an apartment, and I have a usb adapter that allows me to get on the internet wirelessly. The apartment I am at has a club house that offers free internet to people here who don't have it. If I plug in my adapter I can get a signal from the club house's wireless, and I can connect to that, and I have no problems at all on the apartments club house internet, only on my direct connect form my Comcast modem..
View 4 Replies
View Related
May 24, 2011
My internet connction gets disconnected with in 1 hour . local area connection shows packets reciev and sent are in millions in 10 minuts . do i have a virus ?? or becouse of bytes sent and resived so much my internet gets disconnected. after disabling and reanabling my local area connection i can again use my net for some time.
View 1 Replies
View Related
Oct 31, 2012
So the best way to explain this is if im on the internet i wont really notice it because it happens so fast and im on the page. also its wireless internet.If i play for example league of legends il be fine then il be reconnecting then im back but the reason im reconnecting is because my connection dropped for a second.IF i open say an online game and i open a stream watching someone. Either the stream will turn off or the game will disconnect or ill get kicked from both.Ive gone into command prompt and done ping google.com and stuff sometimes its perfect then i do it again it misses 2 with time out then i do again its perfect then again time out again time out then perfect its really annoying.I recently started playing a new game and il be running then disconnect from the servers because my connection dropped for a second and ive rang bt and stuff have 2 new hubs. switch phone lines replaced filters still dont know whats going on.
View 1 Replies
View Related
Mar 13, 2013
I have an ADSL 2+ connection that constantly seems to be dropping at random intervals for no particular reason that i can tell anywhere from 3 to 20 times a day for over 6 months.I have a Dlink DIR-300 router which connects hard 2 pcs and a wirless connection that host for 4 devices , the Router is connected to my Dlink DSL-502T Gen 2 ADSL 2+ Router.I'm constantly having to disconnect the power wait 5 minutes and reconnect the power to get everything back online. From what i can tell the main problem is the DIR-300 router, ive checked it has the latest firmware, reset the router from factory, tested it with less connections, called up my ISP and checked everything was good on there end but to no avail[CODE]
View 2 Replies
View Related
Apr 5, 2013
My router drops my internet connection at least once a day. When the router does this, my wireless network connection disappears from the network list. I have to disconnect router from plug and plug it back in to work again. If I hard-wire laptop to router or modem, I still do not get internet unless I unplug and re-plug router.
View 9 Replies
View Related
Aug 1, 2012
I have tested internet speed on Ethernet (~20 Mbps), but when I'm connected via wifi network, it drops down to ~11 ? The speed is same on all wireless devices even when I sitting next to the wifi router.
View 8 Replies
View Related
Jan 19, 2013
an issue with my modem (i think) I currently cannot get an Internet connection on my computers via wifi for some reason iv tried resetting it but it seems to pick up all the PC's and then 5 minutes later it just drops out which is annoying cause it says that the modem is still receiving Internet and were not getting it iv also tried a new router but the same issue and the speed of Internet is basically halfed what do I do iv tried heaps but it's just ******* me off now
View 1 Replies
View Related
Dec 17, 2012
In the past week I have been getting totally random disconnects from my modem. Sometimes it works great, other times it will essentially cease to function as it tries to sync to bells lines, it seems to be worse at night from what I've seen. I have called my ISP over 4 times, had 3 separate techs come to my house and replace everything from the router to the Internet port down the road.The only thing that has not been replaced is the actual phone jack in my wall but every tech has looked at it and said its functioning fine. I am at a loss, and on the verge of canceling my service with my ISP at this point. Problem is I cannot get rogers for various reasons, so bell is my only option for high speed internet, so canceling with them sorts leaves me high and dry.
View 1 Replies
View Related
Apr 9, 2013
This issue has been going on for a few weeks now, i will be using the internet and it will suddenly drop out. My computer is connected to my router, this connection is fine it is just the INTERNET connection that drops out. When this happens all of the computers on the network are affected.
View 12 Replies
View Related
Apr 4, 2013
I'm at my wits end. We had broadband from Plusnet (uk) put in at xmas. I've had a problem with my laptop connecting wirelessly so I've run a cable from the router up to my room. All's well and I can connect to servers and play online all day to my hearts content. It all goes pairshaped though when someone connects to the internet wirelessly. As soon as the internet is accessed the network just goes. I've spoken to plusnet to see what they can see and as far as they're concerned there's no problem coming into the house. We're getting up to 12mbps which is pretty nice and as I mentioned there's no problem unless someone connects wirelessly. I've changed the channel on the router as there might be interference from a neighbours router. I thought this might have fixed the problem but it's not.
View 14 Replies
View Related
Mar 31, 2013
My problem seems to be with the two laptops with Centrino wireless adapters. My daughter has a Dell with Centrino and was complaining that her wireless keeps dropping out and the other 3 laptops in the house had no problems, I bought a new Samsung laptop the other day and my wireless keeps dropping out on it as well. I looked at all the settings and stuff in the posts I found and noticed that I have a Centrino with advanced N6325 and remembered that my daughters dell also has a Centrino wireless, this is the only similarities that I noticed and can find no reason why I am loosing internet.
View 1 Replies
View Related
Sep 7, 2011
My internet's falling out every half an hour, I'm having this problem for a long time and I'm getting really annoyed by it. It's always out for an average of 3 seconds. The reason this is annoying is because I'm a gamer and these dropouts cause me getting kicked for being unable to connect and such.
View 5 Replies
View Related
Jan 15, 2011
Just starting a couple of days ago my internet started dropping about every 10-20 minutes. The problem is only with this computer. I have a laptop right next to me and it works fine no problem and two other PCs that don't have any issues so I don't think it is the router. I have scanned my computer with different antivirus software and it's clean. The computer is always connected with a full 5 bars and says it has internet access but sometimes it drops and in order to get it up and running again I unplug the wireless adapter and plug it in again. At first I thought it might have been the adapter so I swapped it out for a new one and I'm still having the same problems. My wireless is unencrypted. This keeps happening over and over again and I am stumped on what to do.
equipment: WRT54G linksys router
belkin surf and share n300 adapter
linksys ae1000 adapter
windows 7
View 18 Replies
View Related
Dec 30, 2012
My wired/wireless internet connection drops every 15-20 minutes for a few seconds at a time. I have a Cisco Linksys E2500 which is bridged to a actiontec mi424wr router (Verizon Fios router). My fiance's computer is wired while my laptop is wireless.When I originally set up the network I had 2 mi424wr bridged together but it dropped very frequently. Switching the router and upgrading the firmware has made in happen less but it is still frequent enough to warrant trouble.
View 1 Replies
View Related
Apr 15, 2011
My internet will drop permently if i connect my router ot my modem. I have purchased a wireless router and intended to use it with my Iphone and when firends come over with laptops they could use it as well. Because i live on 3 and a half acres i don't need to protect it well it doesn't bother me. For a couple of days it was working fine until i was playing a game and my internet just dropped and i investigated the issue and found when i unplug the router which is connect to my modems first slot (Ethernet cable) the internet will come back on but when i put the cord back in my net drops. ive tried changing the slots and trying different cables.
View 3 Replies
View Related
Sep 11, 2012
I recently bought an Asus Rt-n56u router to replace a netgear that bit the dust. I have three xbox 360's connected wirelessly to the network, that me and my roommates typically use simultaneously. When any one of us turns off our xbox, we completely lose the internet. Sometimes it comes back in a few minutes, and other times we have to reset the modem and the router to get it back. I emailed ASUS and got suggestion to try port forwarding, without real clear instructions on what to do.
View 1 Replies
View Related
Aug 28, 2011
Recently (for the last 2-3 weeks) my internet connection has been dropping. However my roommates does not. I'm afraid this may be more of a computer issue then a network issue, but I feel that you all know much more than I. [code]
View 2 Replies
View Related
Apr 29, 2012
I can't seem to access the Net when transferring large files between my desktop (WinXP SP3, 100Mbps net card) and my laptop (Win7, 54Mbps WiFi). I have an EDIMAX BR-6228nC 150 Mbps broadband router to which my desktop is wired and the laptop connects through WiFi. The speeds never go above 2.5MBps, so there should be plenty of bandwidth left for Internet use. My router config confirms that there's no Internet connection while transferring the files
View 9 Replies
View Related
