Linksys Cable / DSL :: AM200 Firmware Download Corrupt
Jul 1, 2010I am downloading the latest firmware for the Annex A version of the AM200 DSL modem and windows (7 / 2003 / 2008) is unable to extract the contents of the zip.
View 5 RepliesI am downloading the latest firmware for the Annex A version of the AM200 DSL modem and windows (7 / 2003 / 2008) is unable to extract the contents of the zip.
View 5 RepliesI'm trying to setting up a Linksys AM200 in routing mode, with static ip (WAN), but when I insert 2.113.120.209/30 ip and subnet, a popup show up and sais that the ip si not valid. The same happend when i put the address in local side.
I put the same configuration over another different device and everything goes fine.
I reset the configuration of the AM200 from the factory defaults
how to switch AM200 adsl modem to AnnexB mode, in Slovakia working only AnnexB
View 2 Replies View RelatedX3000 why not download firmware Ver.1.0.04?
View 3 Replies View RelatedLatest firmware with CCC corrupted after power outage. I reseet the e4500 several times and tried to reload the firmware and still no good. Only way I got it back up is to install the older non-CCC version 2.37. Strange all was fine until the power outage. Not sure if I should even bother to upgrade to 2.38 again.
View 2 Replies View RelatedHope u all fine and doing well, Everything i donwload at end it's crrupt After download finished when opining files Files Crrupt Error.
View 3 Replies View RelatedI was just online when all of a sudden i lost connection. I have a WRT54G V8 and did a quick little browse and found out it could be corrupted firmware. When i download the firmware it wants to download as a .bin file and open VLC Media player!? How do i change this or what do I need to open it with?
View 7 Replies View RelatedV2.0.26.124551 is now available. I did the online upgrade and it took just a couple of minutes including the reboot. The firmware is not available as a download yet for manual install. This firmware is dated 11/14/11 so it doesn't appear to correct the Port 53 issue reported earlier.Release Date: Nov 14, 2011 Firmware version: v2.0.26 (Build 124551) - Support for the WAN L2TP and PPTP protocols
View 1 Replies View RelatedWhere can I download the 2.0.36 firmware?I flashed it through the UI but since the factiry fw is crap I want to try the third party firmware that are available but I want to make sure there is a path back to factory version in case I need to return the product.
View 1 Replies View RelatedI was playing with the router/gateway settings on my WRT54G v3.1 router.... and I managed to hose it. I tried power cycling/ resetting it will not route my traffic through anymore...although i can still get to the setup menu.I am trying to download the firmware to flash it but.
A) the site says that for this v3.1 router I need to use the ancient firmware 4.21.1 and
B) the link to the firmware does not work !!! it downloads an empty zip file url...
linksys support, if you are listening, please restore the link to the firmware so I can try and fix my router.
link to the original v1.0.0 firmware for the E4200. That was the best firmware for me and sadly I can't find a link to go back. v1.0.0 really had no problems for me. I initially skipped v1.0.1 becuase it disabled IPv6 which is a feature I want. v1.0.2 broke my YouTube and Netflix streaming. So I went back to v1.0.1 and my Netflix and YouTubue steaming returned to normal but I lost IPv6.
Any solution to Netflix and YouTube streaming problem on v1.0.2 when IPv6 is configured. (I'm positive the video is streaming over IPv4, but the IPv6 connectivity is available.)
I have the original firmware, having some rebooting issues, I want to upgrade the firmware, but can't find anywhere to download it! my current firmware is 1.01.06?
View 6 Replies View RelatedI am going to this page: [URL] but I can see nothing regarding firmware. The "Download software" link takes me to a page that has QVPN, TFTP utilities, etc, but no firmware.
View 4 Replies View RelatedWhere can I download the latest firmware for my wrt600n?
View 1 Replies View RelatedWhere I can download an updated firmware for my WRT54G RG
View 4 Replies View RelatedThe firmware update will not download?
View 1 Replies View RelatedIs there anywhere I can download WAP610N Firmware Version 01.0.00 build 832? I have two units with this firmware version that work OK. I recently purchased another unit that has WAP610N Firmware Versions 1.0.01 and and can only access an IP address if I do not use any security. I also spent a lot of time on the phone with Linksys support to no avail.
View 6 Replies View RelatedDownloading the latest firmware for the E3000. Seems like the link on the page is broken.
View 1 Replies View Relatedis there a link to directly download the EA4500 firmware?
View 3 Replies View RelatedThe device has been trying for days to auto-download and all it does is fail constantly. Saying that my connection is slow - gee, I have FiOS, I know it's not slow,maybe it's your Servers Cisco?Well, where can I obtain the direct DL link to that firmware file instead of relying on an unreliable device to get it and apply for me?
View 4 Replies View RelatedI have a problem with my WRT54G V8 router.I download a wrong Firmware and upgrade it.After this my router never work again.The PC can't get IP from the router.I tried a lot of time to access to the web admin 192.168.1.1 and other IP and nothing happen.I made a lot of reset cycles, with the procedures 30/30/30 or other with the reset button in combination with the power cord.
Exist any other possibility to recover my router.Can I open and touch other button inside the board or something like this?
I have a 4200V2 acting as a Router and (2) more E4200V2's acting as Access Points,The E4200V2 acting as the Router is at Firmware 2.0.37, but, the other Access Points are at Firmware 2.0.36.126507 and when I try to have the Firmware Upgrade Utility in Setup update the Firmware it gives me this message:"Current Version: 2.0.36.126507Available Upgrade: Your router software is up to date"Where is the downloadable Firmware 2.0.7 located?How do I upgrade the Firmware Manually to 2.0.7 and should I ?
View 6 Replies View RelatedCan't find WAG160N firmware upgrade download page on this site A few mounth ago it existed
View 3 Replies View RelatedI was using Billion ADSL 2+ modem since last 6 years. It was working well but I need Wireless LAN N speed connection and I bought Linksys WAG320N.After configuring the modem my download speed has come doen't to less than 1Mb/s. When I connect to my old Billion I am getting 16Mb/s. [code]
View 2 Replies View RelatedHave noticed that wireless download speed deteriorated since they installed this?
Mine seems horrendously slower.
My ISP recently upgraded my line to ADSL2+. I am still only getting 1.36Mbps download speed across WiFi but if I connect my laptop to the router with ethernet cable I get 8.59Mbps. Why is the router slowing down my connection so much?
View 1 Replies View RelatedI recently moved from BT adsl (using the WAG320N) to Virgin 100mb ISP. I had reconfigued the WAG320N to use the ethernet WAN port and the Virgin router as a modem only. The problem I have is that the WAG320N is restiricting the download speed to 37MBs. Initially I thought it was a problem with Virgin but after many visits from Virgin engineers and extensive testing we found that the WAG320N was restricting the speed to 37Mb/s.I am now using the router provided by Virgin which is not ideal. Is there a fix as I cannot find one anywhere.
View 1 Replies View RelatedIve bought recently WAG160n and Ive watched that I have problem with slow speed of WiFi. On LAN cable its ok. Internet provider gives my up 20Mb/sec. download and up to 1Mb/ses. upload. Ive visited
[code]....
I add, that my previous router: WAG200G on this same line gives me 14-16 Mb/sec. download on WiFi. Why upload speed is ok, but download not?
I buy new Cisco Modem X2000.I face several problem:
1- When i enter to any website for example (Facebook), When i check remember me, It's not working if i exit and enter again ( No Cookies).
2- I can't download application in iPhone and Android phones.
i need to downgrade my WAG320N and don't find old firmware 1.00.08 AnnexA
View 9 Replies View RelatedI have a WAG54G ver 1.2, 4-port eth + wireless adsl router. The latest firmware update on the support download site is Ver.1.02.1 from 05/18/2004 which is ridiculous! [URL] This is the ver I have installed on the router and lt does not even have WDS setting, so the device is more or less useless.I have checked open-source alternatives (the wrt line) but they all start with WAG54G V2 and none support the earlier models v1 and v1.2 I need to somehow upgrade this router to something functional. I have checked the GPL code page as well and while there ls a listing for WAG54g, I think itd for V3 routers. So the question is:
1. Is GPL source code usable on v1.2 (I assume not)
2. any suggestions to get a wds system on the router (including beta / alpha firmware)
Is there a firmware upgrade for the Linksys CM100? My CM100's web interface keeps crashing after a week of use.
View 4 Replies View Relatedi trried te update the firmware of my WAG160N. I had to choose between two versions. I tried both. But both versions give the message that is the wrong version and the installations stops.
View 9 Replies View Related