Linksys Cable / DSL :: How To Send Messages Log With Wag160
Jan 2, 2012on the reporting tab, a button gives access to the log. Is it possible to retrieve this log file in order to submit it to a specialist ?
View 3 Replies
ADVERTISEMENT
Linksys Cable / DSL :: Wireless Link Between WAG160 And WAG320
Feb 14, 2011I just purchased a WAG320N to replace my WAG160N, and want to link the two, using the 160 as a 'range extender' to improve the coverage of the network through my house. Unfortunately, I have a phone point at each end of the house, so the modem/router has always been at one end, leaving the other with patchy coverage.
Is there an easy way to do this? I know products exist that are dedicated for this job, but I would like to use the ports on the second modem to link my BD and IPtv. In the future I am looking to run some wired cabling through the walls, but this will not be happening for several months, so I would like to get this happening in the meantime.
Linksys Cable / DSL :: WAG160 Windows Detects Modem / No Signal At All
May 26, 2011 I cannot get wireless collection to work up stairs with the WUS600N Adaptor at all,and with the modem 20 feet from from my laptop downstairs i am only getting 3 BAR SIGNAL STRENTH.Just had Replacement WAG160N ALEX A V2 as my other one died ,(did not have a problem with the one sent back for replacement) Have the latest firmware 00.20 installed model serial No is SSH10JA11079.WUS600N V1 latest drivers for windows 7 .03.10.Windows detects the modem ok, but there is no signal at all up stairs and with the modem downstairs even the wireless on the laptop (15 feet from the modem) is only 3 bar signal strength ,did have this problem with the one I sent back. I have gone through all the wireless channels setup in the set up page with customer support (5 hours!)
View 2 Replies View RelatedHow To Send Messages On Outlook Using Wifi
Dec 4, 2012I am using a verizon wifi unit. I us outlook 2007. I can receive emails but I cannot send emails. How can I adjust the settings to send emails using my wifi?
View 3 Replies View RelatedCisco :: Can IPM LMS 4.1 Send Messages Or Traps
Dec 21, 2011We need IPM (LMS 4.1) to send and e-mail, sms o trap to NNM, is it possible??
View 2 Replies View RelatedDHCP - Which OS Actually Send Out Release Messages As Part Of Shutdown Sequence
Mar 2, 2012I've heard mixed things about the use of DHCP release messages. I've heard that some operating systems don't bother with them at all, which makes sense because many users disconnect the network media without shutting down the workstation. Which operating systems actually send out release messages as part of their shutdown sequence?
View 5 Replies View RelatedCisco AAA/Identity/Nac :: Configure ACS 5.2 To Send Syslog Messages To CS-MARS?
Dec 4, 2011how can I configure ACS 5.2 to send syslog messages to CS-MARS?
View 3 Replies View RelatedCisco Firewall :: FWSM 4.1 How To Send Mail Messages When Fail Over Occurs
Feb 16, 2012We are using FWSM with software version 4.1(6) with failover and multi contexts.We need to generate and send mail notifications when failover occurs.
With this configuration we are receiving syslog only! [code]
Cisco Switching/Routing :: Nexus 7k - Possible To Send Syslog Messages To SNMP Sever
Jul 2, 2012Query is, Can i send my syslog messages to SNMP sever? if so, what command needs to be enabled on nexus 7k?
View 3 Replies View RelatedCisco Switching/Routing :: 1841 - Unable To Make Router To Send Syslog Messages To Server
Dec 15, 2012I am using Solawinds syslog and trying to get our Cisco routers send syslogs to our syslog server. I followed the procedure on Configuring Cisco Devices to Use a Syslog Server from [URL] Our Cisco swtches are all sending syslog messages but not the routers. I compared the config with our access switches but can't seem to find the problem:
Sample router config:
service nagleno service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryption!hostname WWF-RT1boot-start-markerboot-end-marker!security authentication failure rate 10 logsecurity passwords min-length 8logging buffered 4096logging rate-limit all 10logging console critical!aaa new-model!!
[Code] .......
is there a command that prevents the router from sending the syslog to the server?
Linksys Cable / DSL :: Cisco WAG160Nv2 - Unable To Send Request From Application
Jun 27, 2011Since i used this new modem ruoter, on facebook game Cafe WORLD i can't send requests or gifts to neighbors/friends. when the window pops out there's no friend list. it's just a blank space. also when i click the share button only a blank page pops out. i tried it in 3 different pc here @ home in different browser but still had no luck...i tried it on my bf's place and it works so i guess there's a prob with my connection. and sometimes i have the internet access but i couldn't navigate in any website only for chatting.
View 3 Replies View RelatedBT Router Won't Send Over Long Distance Cable
Feb 27, 2012I have an old White BT router (from the UK)
Also a 60m ethernet cable. It won't send a signal far enough to be picked up by an ethernet port on another computer at that distance via cable.
However, a modern Zyxel Router will chuck it through that length of cable OK
way to get the BT router (v1 or 1.5) to do this ?
BT Router Won't Send Over Long Distance Cable?
Feb 27, 2012I have an old White BT router (from the UK)
Also a 60m ethernet cable. It won't send a signal far enough to be picked up by an ethernet port on another computer at that distance via cable.
However, a modern Zyxel Router will chuck it through that length of cable OK
is there a way to get the BT router (v1 or 1.5) to do this ?
Linksys Wireless Router :: EA6500 - FTP Client Facing Improper Messages?
Mar 10, 2013When I tried with Security disabled, I could FTP and see my drive from an external network. However, once I rite & Security is enabled with write and read "" granted with a user profile created, the FTP Client has some error message; Could it be due to mode in FTP settings? (passive is set)
View 1 Replies View RelatedLinksys Wireless Adapters :: WMP11CFG.EXE Being Used To Send A DNS?
Mar 27, 2013WMP11CFG.EXE being used to send a DNS?
View 9 Replies View RelatedWireless :: Linksys EA4500 - Unable To Send Email With New Router?
Mar 14, 2013just upgraded to a Linksys EA4500 wireless router at my small office from an old Netgear. My email now wont send messages out on either my IPhone or my laptop(Toshiba) while using the wireless network. If I turn off Wi-Fi on my IPhone, my email immediately sends the messages. What settings do I need to change? I have Comcast internet and one IMAP email account and one "Yahoo" email account
View 3 Replies View RelatedWireless :: Unable To Send Email With New Linksys EA4500 Router?
Mar 14, 2013just upgraded to a Linksys EA4500 wireless router at my small office from an old Netgear. My email now wont send messages out on either my IPhone or my laptop(Toshiba) while using the wireless network. If I turn off Wi-Fi on my IPhone, my email immediately sends the messages. What settings do I need to change? I have Comcast internet and one IMAP email account and one "Yahoo" email account
View 1 Replies View RelatedLinksys Routers - Using BEFW11S4v4 As Bridge Or Repeater To Send Wireless Signal
Jan 4, 2012If I have two Linksys wireless routers in my house, ( 1 Wireless-G as the Gateway attached to the DSL line, and attached to the main computer, and 1 Wireless-b model BEFW11S4v4 that I want to use as a bridge or as a repeater to send the wireless signal around the attic (2 floors away) and I have connected them via Ethernet, and then connected to the attic computer (not the main one) via Ethernet to Wireless-B, why can I not get connectivity on the attic computer?
If I forgo the Wireless-B router, and connect the ethernet to the attic computer everything is fine, but there is no wireless signal in the attic. (only downstairs where the Wireless-G is.) I believe I can access the Wireless-G and tell it to be a bridge or a repeter (?? I think) but as far as I can tell the Wireless-B is giving itself the same IP address as the Gateway Wireless-G is using, and I don't have an connectivity, so I can't change it! Im confused.
Linksys Wireless Router :: EA4500 / How To Send Logs To Syslog Or Via Email
Mar 5, 2013I absolutely need to collect the router logs and send them to a syslog daemon or via email.
View 9 Replies View RelatedLinksys Wireless Router :: WRT54G Can't Connect To Internet - Send Packets But Not Received
Jun 6, 2012I have a Linksys wireless router model WRT54G (not sure the exact model, it's not in front of me right now). It has worked flawlessly for the past several years, but for some reason has recently stopped working. I confirmed it's not a problem with the DSL Modem, as I can hard wire connect to my laptop and the internet works fine. It's clear something is wrong with the wireless router. I've tried unplugging, hitting the reset button on the back, and nothing has worked. My computer is able to recognize/locate the router and connect, it's just that I can't connect to the internet. One thing I've noticed under the wireless connection is that the computer is able to "send" packets, but not "receive." My experience is that this is always the case when I experience connection problems, but I have no idea what that means. I was going to call the Help Line, but I see it costs $30 which is likely more than my router is worth and probably 1/2 to 1/3 the cost of a new one so I am trying to troubleshoot myself.
View 8 Replies View RelatedLinksys Wireless Router :: E2500 - Send Stronger Wifi Signal / Dns Settings
Dec 1, 2011I just upgraded from a WRTG 54 version 2 wireless router to the Linsksys E2500. The reason for the change is to send a stronger wireless signal strength further in my house. Setup was easy to my laptop and XBox 360 but my Samsung Internet TV is another story. I can get my tv to get the wireless signal but when I click on an app nothing but error messages. Often times it will say to check my dns settings but I am not that tech savvy and don't know what to do.
View 9 Replies View RelatedLinksys Wireless Router :: EA6500 Router Not Found Messages Appear
Oct 17, 2012I purchased an ea6500 to replace a ea4500 about a week ago and in summary, I will be exercising the 30 return policy at the retailer, and probably never buy a cisco router again.not connected to router, and router not found messages appear alot.
Internet connectivity stops, unable to log into ea6500 completely frozen, but still routes to other LAN devices (like the SPI firewall i have the monitors network usage). then ranomdly comes back, and goes. can switch AP, and other will work, non-stop. is DEFINATELY ea6500.
sometimes I have to power cycle 6-7 times before it will maintain a wireless network that doesnt drop every 15-30 seconds.otherwise when i connect to the wireless, it log on for 10-15 seconds, then drops off and "Attempts" to reconnect.often stalls out, and crashs when USB external drive is connected at first. (again, power cycle 6-7 times to get to work properly)windows 7, and OS X 10.8 on 3 differant machines.
seems to connect better on the windows machines, and sometimes connecting with a windows machine allows apple ones to connect properly after... weird (OS X bugging up DHCP server? bacisally, when it goes down. it can take an hour to get my wireless back up, power cycle, and then see if its working proplerly, it usually isn't, try again... etc.
Linksys Cable / DSL :: Atlanta 2100 - When Installing Driver To Use Usb Cable Modem Does Not Recognize It
Dec 13, 2012I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.
View 3 Replies View RelatedLinksys Cable / Dsl :: Cable Modem Dpc3825 - Hook Up To Smart Apps Wifi?
Apr 23, 2013With this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies View RelatedLinksys Cable / DSL :: WCG200 Bridge Mode From Wireless-G Cable Gateway To Wired?
Mar 14, 2013Our family has about three computers that use a wireless network that we all share. We have an old Gateway, a WCG200, that is bridged to an E2000, which was set-up ever since we required better security when someone used our connection to illegally obtain movies. We got a letter which warned us of any future violations that could cause legal action, so we looked into our wireless connection to better secure it from any other individuals outside of our household. The WCG200 is connected to the outlet in the wall via cable, and then connects from the Ethernet to the E2000. The E2000 has a stronger security setup than the WCG200, which is the advice we received from our ISP and would allow us to keep the Gateway. It provides a strong signal, but from time to time, we suffer latency or slow loading through all of our online devices, even though our connection speed displays a solid 72.0 Mbps. I've tried the Event Viewer to see any problems, and I have noticed some small things:
- WLAN AutoConfig service has successfully stopped.Wirel?
- WLAN Extensibility Module has stopped. Module Path: C:WindowsSystem32cmihvsrv64.dll
- The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout.
- Broadcom NetLink (TM) Gigabit Ethernet: The network link is down. Check to make sure the network cable is properly connected. [This last one is strange, since I use the Wireless Network Connection with a DW1501 Wireless-N WLAN Half-Mini Card, while the Broadcom adapter is under the Local Area Connection and displayed as not connected.]
Other than that, I'm not quite sure what the recurring problem comes from. Our WCG200 has a firewall enabled and our E2000 has an SPI firewall enabled. The security mode of the E2000 is a WPA2 setup. We have disabled the wireless network of our WCG200 in order to make use of the E2000.
Linksys Cable / DSL :: WAG160N Blinking With No Ethernet Cable Attached To Router
Feb 24, 2012I have a WAG160N wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.
What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ?
Linksys Cable / DSL :: BEFCMU10 Need To Install And Get Cable Modem Working
Mar 24, 2011I inherited a BEFCMU10 v.3 cable modem from my boss who switched to FiOS and I would like to use this with my Comcast connection.All I received from him is the cable modem and power adapter, what do I need to install and get this cable modem working? My router is WRT-54G.
View 2 Replies View RelatedLinksys Cable / DSL :: Can't Get A New IP From ISP When Cable Modem EPC3925 Is Set To Router Mode
Mar 23, 2012I can't get a new IP from my ISP when my Cable modem router(EPC3925) is set to router mode, i have tried factory restore, unplugged etc..but still no luck. It changes each time i reset it when i set it to bridged only mode but then i won't be able to connect other devices to it since it doesn't uses DHCP in bridged only mode. It changes back to the IP i had when i set it to router mode. I don't want to change my router settings to bridged only because it would disconnect the other devices in my house. Why my ISP assigns the same IP address when it's set to router mode but assigns different IPs when it's set to bridged only, how is this possible ?
View 1 Replies View RelatedLinksys Cable / DSL :: WAG320N And Cable Modem Connection?
Jun 4, 2010some reference material about configuring my WAG320N to use my cable modem via Ethernet port 1. I've seen it mentioned that's its possible, however I've been unable to sort it out myself.
And before you ask, I've brought the DSL router as I'm moving in the next 12 months and my new base will not have access to cable internet and I'll be reverting back to DSL.
Servers :: Can't See Messages On Facebook?
Feb 7, 2013what can i do if my computer is not letting me see my messages on facebook what
View 1 Replies View RelatedKeeps Repeating 2 Messages Then Timing Out?
Mar 30, 2011it keeps repeating 2 messages then timing out
View 1 Replies View RelatedD-Link DIR-655 :: What Does Syslog Messages Mean
Jul 26, 2012I'm getting the Syslog messages frequently on daily basis.
View 4 Replies View RelatedCisco WAN :: POE Log Messages On 857 Router?
Oct 3, 2012I have noticed poe log messages in my cisco 857 router, looking around there is mention of a cosmetic ios bug pertaining to 877 router but not the 857. BUG - CSCsd68389. Why i am getting these errors on my 857?
001586: Oct 5 11:25:06.499 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE
001587: Oct 5 11:25:06.499 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0
001601: Oct 5 13:06:29.879 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE
001602: Oct 5 13:06:29.879 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0
001603: Oct 5 13:06:31.387 NZST: esw_dtc_ltc4258_reg_write: no acknowlege from POE
001604: Oct 5 13:06:31.387 NZST: esw_mrvl_pdc_hardware_config failed on slot 0/0
[code].....