Linksys Wireless Adapters :: WEC600N Everything On Program Is Grayed Out Except For Exit
Jan 3, 2009
My Compaq Presario V3015's Internal Wireless Adapter has died so I recently bought an Linksys Expresscard WEC600N to replace it. After installing the software (The Linksys monitor) everything on the program is grayed out except for "exit" which closes the program. After looking at device manager, the adapter isn't even listed their. For some reason, even when just plugging the adapter in after an uninstallation of the software and a restart of the computer, the device never gets detected even when it is clearly on (two blue lights for Power and Link/act). I've tried switching to Windows Wireless Zero connection but under network adapters, it doesn't even show a wireless option, just an LAN one. I'm pretty sure its not so much a hardware issue as it is a software one. Everything works fine except for anything related to wireless capabilities on this laptop.
View 4 Replies
ADVERTISEMENT
Jan 20, 2012
Just picked up a WEC600N Wireless N Express Card and installed. It's working, but it's connected at 54mb and I cannot find out how to configure the wireless settings. I think I am using the Intel Proset wireless software.
Also, router is a netgear wndr3700.
View 1 Replies
View Related
Mar 22, 2012
I have an HP G60-530US laptop with Windows 7 Home Premium 64-bit. I bought a Linksys AE1200 USB Wireless Network Adapter because the laptop stopped recognizing the internal wireless adapter. However, when I use the CD that came with the Linksys adapter to install it, the adapter is not detected. I have tried different USB ports and also power-cycling the router & cable modem & rebooting. Nothing seems to work. I also ran the Setup program on my Gateway DX4860 desktop but the Linksys AE1200 is not detected on the desktop, either.
View 2 Replies
View Related
Feb 11, 2007
The "Wireless Network Monitor" for my Linksys Dual-Band Wireless A+G Notebook Adapter Model No WPC55AG has been unable to run after I last updated my Windows XP machine using Windows Update. The problem presents itself immediately upon login (because the monitor is set to run on startup) with an error window that says "Abnormal program termination" and "WPC55AGV2.exe" in the title bar. I suspect the problem occurred because one of the new updates included an upgrade to the Microsoft .NET Framework Services 3.0.
View 6 Replies
View Related
Oct 12, 2011
Well I accidentally put the router in bridge mode. It's a e1200 or 2500 I'm not exactly sure. But I was wondering how I can get it out? I can't access the web interface at 192.168.1.1 however I can access my modem's interface at 192.168.254.254.
View 4 Replies
View Related
Apr 11, 2012
I was using my laptop using wireless last nite without any issues.Today i could not get the Internet and noticed under my wireless assistant it says wireless lan disabled ,it is grayed out so i cannot re-able it.Have tried rebooting ,switching router off etc without success.
Never had issues before the router is belkin N router and my os is vista.
View 1 Replies
View Related
Apr 25, 2012
We have 5 computers, 2 ipads, 3 iphones. All have been able to use the router until recently. We had a virus in our computer that is hooked up to the router. We formally had a "Linksys" router, now we have "Cisco Linksys e2500" . I had not made the connection that Linksys and Cisco were the same. We had "linksys" deleted from our "program". Some of our devices still receive wifi, so are struggling. Is there a way to down load what I need to do to get the Cisco Linksys e2500 working up to capacity?
View 1 Replies
View Related
Oct 26, 2012
Trying to set up EA2600 Wireless Router. I follow instructions exactly re connecting cable modem to router. Setup program then searches for network, but at 25% completion it says it can't find the router.I've reset the router via button on bottom and retried setup procedure multiple times without success.
View 5 Replies
View Related
Dec 26, 2011
Router config and i just follow the instructions anyway i just bought this router cuz the old one failed and it was installed ok with internet connection and everything but when i open a program like bittorrent azureus the internet connection dies, it happens on my laptop and mac they both seem ok but when i open that program internet connection disappears
View 1 Replies
View Related
Mar 10, 2012
I haven't installed anything new lately, nothing that would affect the wireless, but my wireless suddenly stopped working. My wireless has been working successfully for the past 2 years no problems till now. I have a Dell Latitude E6410 my computer is running Windows 7 32bit. When I open up the DW WLAN Card Utility it says "There are currently no wireless adapters available and enabled. Please enable any available wireless adapters before accessing this configuration utility. I tried reinstalling drivers for the wireless but my computer says "no compatible hardware found".
Also the under the wireless adapters section of Device Manager there isn't an adapter for wireless, but there is an unknown device.
Here's a View at my Device Manager [URL]
I've tried to use computer restart magic but no luck there.
Also, my computer is running on a university network. My roommate's wireless is working fine. Also I've already system restored to a point where I know it was working, no luck...
View 2 Replies
View Related
Jul 10, 2012
my computer was on a lan but suddenly stopped to be part of it.The other coms can see him on the network but mine one cant see anybody.I ve tried everything is written on this site and everywhere on the net but the problem remains.The network id tab is still disabled.im running xp pro,no media center and my antivirus is kaspersky.
View 2 Replies
View Related
Jun 12, 2012
I have a Cisco 3560 using ipbasek9 with IP routing enabled for inter VLAN Routing, to exit my network and hit the outside world I have a Cisco RSV 4000 in Gateway mode. I have a number of VLANs set-up but the only one that can access the Internet is the one on the same VLAN as the Router, below is my part of my Switch configuration.
View 19 Replies
View Related
Mar 7, 2011
I'm trying to secure my dir-615 and I can get in to the web site but the connection wizard is greyed out and the manual set-up is alos greyed out even though I can select manual set up?
View 2 Replies
View Related
Mar 13, 2013
I have a n Ipad 4 with bad Wifi when connecting through a DL835, Firmware Version: 1.02. Other devices are fine and apparently i should try disabling WMM. I can see WMM but it's grayed out and i cannot disable.
View 1 Replies
View Related
Mar 25, 2013
I'm not sure if it's different when you log in remotely via mydlink, but by using the web based interface localy (by ip address) I can't find a way of exiting full screen option under live view. I tried the obvious escape button. Right-clicking does nothing, and double clicking actually makes it truly fullscreen (aspect ratio gets stretched to my monitor 16:9 btw, instead of retaining 4:3.So is there a way to exit? Using chrome, maybe it's a chrome issue and it works differently in other browsers but I see no mention in the manual of exiting fullscreen.
View 4 Replies
View Related
Oct 20, 2011
I would like to capture packets which are going through an IPSEC tunnel. The packets originate in the appliance (syslog) and are sent to the remote via a VPN. I can see the encapsulated packets going out to the peer and I can see the ISAKMP packets to and from the peer. Because the packets originate within the appliance, they do not appear on any interface to be captured.
Is there some way to capture these packets before they are encapsulated?I attempted to capture packets on the asa-dataplane, but they are in a format that I cannot decode, and I cannot put a filter on the capture.
Hardware is ASA-5520
Software is version 8.3(2)
View 2 Replies
View Related
Sep 30, 2011
I have extension mobility configured and working fine. Except that when you log into the phone, the phone does not exit back to the main display. To get back you either need to exit out of the menus by pressing exit a few times or press the globe / web button on the phone.
View 6 Replies
View Related
Feb 25, 2011
The enable button is grayed out on my windows XP laptop so I need to know how to enable it.
View 2 Replies
View Related
Jan 26, 2012
i'm already has one internet connection is connecting directly to the Core Switch 6509,Vlan 500 (1921.168.1.0) and the Switch is route any internet request with default route:
SW6509-conf)# ip route 0.0.0.0 0.0.0.0 10.170.10.10
10.170.10.10 is --> Next hop for the DSL router internal IP, and it's working fine.
The Problem: We have a new internet connection with new Vlan 600 (172.16.1.0) another ISP/ with another DSL router, so i need your kindly support and suggest how to connect both of them to exit from the Core Switch 6509. is it ok if i make another default route to the Next hop to the new DSL router as:
SW6509-conf)# ip route 0.0.0.0 0.0.0.0 10.80.10.10
10.80.10.10 is --> Next hop for the new DSL router internal IP.
is there any way like default route , route-map or any other features to :
route Vlan 500 (192.168.1.0) to exit from DSL 1 --> 10.170.10.10
route Vlan 600 (172.16.1.0) to exit from DSL 2 --> 10.80.10.10
View 3 Replies
View Related
Oct 24, 2011
I am using USB internet connection. I am trying to connect internet, it shows all the signal but connect button is grayed out.
View 1 Replies
View Related
Oct 11, 2012
I got a problem with my netgear WNDR3400V2.As u see in this picture the box allow guest to access my local network is greyed out.I made the router an access point and have no clue how to make it normal again.
View 2 Replies
View Related
Jul 3, 2010
in the QoS-section of the SRW2008P web-interface I can choose only between Disable and Basic, Advanced mode is greyed out.
I've created a new ACL but QoS Advanced mode isn't available.
What can I do to activate it?
Boot Version: 1.0.1
Software Version: 1.0.4
Hardware Version: 00.03.00
View 5 Replies
View Related
Apr 7, 2011
When I launch Monitoring & Report Viewer and select one of the report (TACACS authorization for example) I want to filter the search with Interactive Viewer, but I can't cause all options are grayed. I've heared that some flash is needed but I've got plugins installed and nothing changed.
Can I run in in demo version? cause I've read that there is an add-on license which "Add-on licenses are available to support deployments that are larger than 500 devices (AAA clients) and to support advanced monitoring, reporting and troubleshooting functionality"
View 5 Replies
View Related
Sep 22, 2011
Why i cannot log in to my vpn program.i successfully installed and run it.. but the problem is i cannot log in.. and my computer will pop up error message..
View 1 Replies
View Related
May 5, 2012
i am use wifi connection for this which program i have to run?
View 1 Replies
View Related
Feb 27, 2011
I have a work program on my laptop (windows7) and would like to access it from my desktop (window 7)
View 1 Replies
View Related
Jul 8, 2011
ok my laptop dell XPS got virus and crashed...i cleaned it up and re installed window 7.Now my wireless 825 program is gone...i tried to install CD dlink 825 and it kept say retry.
View 1 Replies
View Related
Dec 24, 2011
making Windows 7 do what it's supposed to? Seriously, there needs to be a button you can click to roll it completely back to XP.
View 1 Replies
View Related
May 24, 2011
When I get to the screen that asks for the the security password, and after typing in password then at the bottom their is a button for Back and one for Cancel. The button in the middle for Next is not highlited or clickable.
View 2 Replies
View Related
May 26, 2011
How to install model WUSB54GSC.
View 5 Replies
View Related
Jan 17, 2012
I run the CD setup disk and the driver install correctly.In the "Connecting the Adapter" screen I click next before connecting the adapter,the setup screen just close with out any notification and no icons on the system tray.I shut down the machine, insert the adapter and power on the machine,now I have the monitor icon and a wireless connection icon in the system tray (the Power led is green and the Link led isblink),when I double click on the monitor icon I got the following screen: no available wireless and the refresh, connect and manual setup are disabled.when I click on the "open the monitor" form the right click menu I got the following screen: also nothing to do on this screen.so I think it's was because I don't have any wi-fi around me, I shutdown the computer raise my wi-fi andrestart the machine, now the led in the same status but the system tray icons didn't appears and when Itry to open it from the menu it's run for few seconds without any screen and disappear.
View 6 Replies
View Related
Jan 21, 2011
I'm running Windows 7-64 bit. The AE1000 works great so far, in the one day I've had it, and it appears to start itself and connect when turning the computer on (unlike other people on here that I've seen). BUT, it's all pointless if I can't put my computer into standby. The adapter kicks it right back out as soon as I try to sleep the computer.
I've checked the device settings and "allow the device to wake the computer" is unchecked (in fact, it's grayed out). I rarely turn off the computer; I much prefer to just put it in standby. I don't want to have to unplug the adapter every time I do that.
View 1 Replies
View Related
Jul 5, 2011
I recently re-installed Windows on my PC, and I had the Wireless-G PCI Adapter installed before I done the re-installation.Now I've re-installed Windows, the adapter doesn't work. Do I have to re-do the whole process again? Also, I didn't actually install it myself, so any detailed step-by-step tutorial?
View 3 Replies
View Related
