Linksys Wireless Router :: E2500 - Connection Dropped On Both G And N Cards
Feb 18, 2012
I recently purchased a linksys E2500 for my home network. Occassionally, we have dropped connections, on both G and N cards.The router is connected to a corei3-2100 cpu with 6 gb ram and a 1tb hd, running win7 64bit. Ive bought home plugs for my wife's computer(in the house)and.an outdoor wireless antenna (a CCRANE super usb wifi antenna) for my computer in the garage. I still get dropped signals in the garage, which is only about 50 ft from the router. My computer in the garage is an AMD dualcore 4400 with 4 gb ram, and multiple hdds.What else can I do to get a better and more constant connection.
View 1 Replies
ADVERTISEMENT
Dec 23, 2011
I've been fighting with my E2500 since I got it back in June with lag, dropped connections, etc. It's a bit intermittent but can hang around for hours at a time when it kicks in. Restarts but the issue always comes back. Most noticeable while gaming online or on a VOIP program such as Team Speak. Generally when it happens If I'm monitoring my Team Speak connection the incoming packet loss shoots up between 20-30%, starting to drop out every other word or so. No out going packet loss. The connection drops are random between computers (I have one mac and one pc in the house) where one will be fine and the other wont, or when the whole system will stay connected and drop all transfer. In the case of this last one it's not my ISP's connection as any streaming happening between one computer and an Apple TV device will also cease. I've also swapped back to my old router (an older model linksys) and all problems have stopped. Fully rebooted and reconfigured the router about 3 or 4 times and am on the latest version of firmware (1.0.003). It was much worse on 1.0.002 but still very noticeable on 003. Also no difference with a different wireless adapter. I've tried the chat technical support but all they did was take 45 minutes to tell me how to reboot my router after telling them I already had.
View 1 Replies
View Related
Jan 27, 2012
Just got an E2500 and installed it with no problems and it was working correctly for 1-2 days. This evening the signal strength of my SSID dropped to LOW and a new SSID now shows up with full signal strength. It s not an SSID from any of my neighbors and from checking several forums it appears this is known problem.
View 2 Replies
View Related
Jul 7, 2011
I bought I router today, Linksys E2500 and set it up, for some reason its connected with full strength but the internet does not work on my computer, or any other device connected to the network I established on the router.the interenet still is not working. The modem is fine, as when I disable the wireless connection, the internet works. Yes, I have Sp3 installed.
[code]...
View 3 Replies
View Related
Jul 4, 2011
I've had this WRT300N for several years and it has worked very well.It suddenly dropped all wireless connections and no one can re-connect. My main pc is hard wired directly to the router and works perfectly as always. 3 wireless pc's and 3 handheld devices suddenly can't connect. I've powered down my modem and router for several minutes, but nothing changed. The firmware was upgraded a long time ago and there are no other upgrades available.
View 7 Replies
View Related
May 25, 2012
Bought an E4200 to replace my Netwgear router and am experiencing the following problem.One of my wireless boxes serves as mu mail server. I've been running this configuration for years so the only thing that has changed is the router.The neworkd is up and all wireless clients can connect, but after some time, access to the mail server just 'freezes'. I say freezes as the nework icon (i'm using ubuntu' still show a connection. In addtion, there are not error in any of the logs. I just seems that the mail server and the router just stopped communication.
View 9 Replies
View Related
Jan 3, 2012
I just installed a E4200, and found that once I connected my Homeplug Powerline to E4200, the connected (wired / wireless) computer (with E4200) connection will be dropped. The connection become normal again once I disconnected the Homeplug with E4200.
View 5 Replies
View Related
Jul 1, 2011
I got several issues with the E4200.First of all, my connection speed dropped from 2megs/sec to 100k/sec with that router. Flashing it with the lastest firmware worked but still, I don't get all my speed as I has with my WPG54GS (with DD-WRT).Second, speed is really unstable, like if it was working by burst of data.Third, I got a gigabit port on my computer, plugged in the router and still, I can't make more than 10megs/sec WIRED (!) between my computers. I desactivate the ipv6 from my network card but still, no luck.
View 5 Replies
View Related
Dec 4, 2012
Just bought the linksys E2500 as an upgrade for a my Trendnet 150 wireless N router. I have a motorolla surfboard modem with time warner roadrunner cable internet. After connecting the router I have no internet connection. I do not get a light on the WAN connection after the ethernet cable is attached. I know the light works because when I power it on all the lights come on. I cloned the MAC address but this did not work. I have searched the forums for hours and tried different ideas to no avail. My PC recognized the router and I'm able to get to all the settings but cannot establish a connection from the router to the modem. I also tried different ethernet cables to eliminate that possiblilty.
View 4 Replies
View Related
Dec 8, 2011
I purchased an E2500 router today and it worked perfectly for about 4 hours. Now it drops my internet connection constantly. I can connect and load maybe 2 pages before that little yellow triangle of doom appears. Then after 2 or 3 minutes I am good and can reconnect. This cycle just keeps happening.
View 1 Replies
View Related
Oct 7, 2012
Currently running Windows 7, with internet explorer. I have most recent firmware installed on my e2500. The unit drops wireless connectivity on an intermittent basis. Sometimes after 5 minutes and sometimes after 20 or 30 minutes.
View 9 Replies
View Related
Jul 13, 2011
I just purchased a E2500 wireless router to upgrade from the previous G- router which I was using. I'm not very experienced in tech issues and would like to know, what would be the easiest way to extend my wireless signal through out the house. The E2500 which I just purchased does not cover all the areas in my household.
View 1 Replies
View Related
May 12, 2013
I've been having issues with my e2500 router. I've found my connection dropping occasionally both with a wired connection and wirelessly on other computer. My desktop is connected directly to the router via ethernet and I've been keeping an eye on my network preference pane. Every 10 minutes or so the connection will be lost and computer says the cable is unplugged. It then resolves after 2 minutes.
I'm running OSX 10.8, firmware 1.0.07. Done a factory reset, power cycles etc. Configured with Cisco connect and manually multiple times. I've swapped out ethernet cables just to be sure it wasn't a cable issue.
Internet is fine when I've got the computer hooked up directly to the modem. No connection issues.
View 5 Replies
View Related
Nov 21, 2011
I have a Linksys E2500 Firmware Version: 1.0.03 and am using the "IPSec Passthrough" for work. On a typical day I'll sign in to my work's VPN, do my work, sign off in the evening, and read my personal email with a direct connection to the internet.
Then on the next morning, I am unable to connect to work until I go to http://192.168.1.1/index.asp and click "reboot." And as soon as the modem finishes rebooting, my laptop can connect to work. I've tried this several days in a row now, and indeed all I need to do to get the VPN passthrough working is rebooting the modem.
Nothing under "Applications & Gaming" is set. I've seen some posts about having a trigger on UDP port 500, but I'm not quite sure how to translate it for the E2500. Plus I'd rather the router "just work" day after day for VPN and everything else, like my old router did! Is there some other setting to try or clearer directions for a bulletproof IPSec passthrough on that unit?
View 7 Replies
View Related
Aug 12, 2012
I already have a desktop and modem at home, but I recently bought a new Sony Vaio laptop for college. I also bought a Linksys E2500 wireless router so my laptop could have internet access at home.I inserted the Starter Guide CD into my desktop, created my ID/password, and connected all the cables like it instructed me to but I still couldn't connect to the internet. Instead, several windows popped up with messages like, "Found new hardware. Locate and install driver software, "Insert disc that came with Internet Access Server", and "Windows could not find driver software for your device."When I tried to troubleshoot, I get something like this, "There may be a problem with your DNS - Windows attempted to find www. microsoft.com using DNS, but server responded back with unknown."I also tried inserting the disc into the laptop, but I still didn't recieve any internet connection, but it says that my router was connected.I tried following its advice to restart, unplug cables, and wait 2 minutes but none of it seem to work.
View 3 Replies
View Related
Feb 5, 2013
I just bought a new Linksys E2500 router from Best Buy and I need optimizing my router settings so I can get the absolute best performance out of it. Staying connected and keeping speeds high are a must.I have been noticing connections cutting out at time. It is frustrating when I lose my internet.we have ~3000 sq foot house... 3 levels (basement, first, second).We don't use all of these at the same time but we have: 2 laptops, 3 iphones, ipad, and a PS3 for online gaming.
How can I get the absolute best, most reliable connection and speeds out of my router so we don't experience disconnects?I bought the RE1000 range extender... having installed it yet because the install CD that came with it is the wrong CD (It came with the E900 install CD... which is for a router)I bought the N600 USB adapter which I guess is supposed to update your wireless card for your laptop. I am using that but bars seem low..
View 9 Replies
View Related
Apr 11, 2012
We are using a domain and Windows Server 2008 machine with DNS/DHCP setup and active to handle traffic on the network. The old router we had was a cheap (~$20) TrendNet that was configured (not by me) without issue to not only allow the server to handle IP's but also allow us to get in to the server remotely via Remote Desktop. My cut sheet says they had a "virtual server" setup.
Anyways, we now are running an E2500 and if I put in the external IP, Subnet, Gateway, and DNS for our internet provider and then disable DHCP on the router, we don't get internet access. I'm missing what configuration I need to get the server to handle all the traffic I guess. The server has DHCP enabled with the router IP address (192.168.1.1) set and the server address is (192.168.1.2). Like I said before it was working fine with our old router and none of the settings on the server have been changed so must be something with the new router.
Do I need to setup something in the advanced routing to get this working? Currently I have DHCP on automatic and DHCP server enabled just so we can get internet access. DHCP services on the server are still on as well. Can't get any access to the server from the outside via Remote Desktop like we could before.
View 9 Replies
View Related
Dec 27, 2011
I have an E2500 with the latest firmware upgrade (1.0.03). My configuration is simple, I have a fixed IP from my ISP with fixed DNS servers. I have one computer connected via cable and one connected via wireless and a laptop that gets connected on occasion wirelessly as well. I also have an android phone that I sometimes have the networking turned on and sometimes not. That doesn't seem to be affecting the router either as I've lost connections under both circumstances. The only thing I have different is I clone the MAC address as the ISP has my IP linked to my old Linksys MAC.
The problem is I randomly lose connection to the internet, the home network is still up it's just the internet goes down. I could be on the computer or not, sometimes while browsing sometimes after I browse for a while sometimes before I get started. Fortunately its not happened during one of my online games but it has happened just after I log off the game. It usually happens a couple of times a day.
View 6 Replies
View Related
Feb 24, 2013
I'm using an E2500 router and an EA2500 adapter (to update my desktop from 802.11 g connection to 802.11n). I've connected my notebook to the network and the connection speed for the notebook is approx. 5.5 Mbps compared to 21.5 Mbps for the desktop connection. why the notebook connection is so much slower?I've just reinstalled both the E2500 and EA2500 tonight. I'm not sure whether or not there was such a vast difference in speed between the two before the reinstallation.
View 4 Replies
View Related
Jan 10, 2012
Just replaced a WRT54GS with an E2500. It seems that anytime a connected device goes "idle" for a while, the connection breaks or severely reduces and it's nearly impossible to get the connection back without performing an action at the device in question. Let the wireless connection on my laptop go unused for some period and it reduces to 1Mbps and you can't get back on by just using the link more... you have to do a "repair".
Let more than a few minutes pass since you've printed something on the wireless printer and you MUST go to the printer to re-establish the connection by turning the antenna off and then on again.Basically the same problem with my blueray/DVD getting on the network. When I shut the screen off on my phone, the wifi dies and receives NOTHING over that link while the screen is off.
None of these behaviors existed with the WRT... just the 2500. Background/facts - current firmware, DHCP with reservations, WPA2/per, MAC filtering in use, UPnP disabled. MTU/Beacon/Frag threshold/RTS threshold set per recommendations on this site.
View 2 Replies
View Related
Aug 4, 2011
here is what I have:
A) Sonic Wall @ 192.168.1.215
B) Linksys Switch (WRW248G4P) @ 192.168.1.254
C) Linksys Router (WRT160N) @ 192.168.1.202 (Disabled DHCP Server)
D) Linksys Router (E2500) @ 192.168.1.203
E) Windows Server 2003 @ 192.168.1.200
F) There is also a Router @ 192.168.1.201 that runs DD-WRT that has an enabled DHCP Server.
It goes something like this
i) A - B --ETHERNET-- E
ii) A - B --ETHERNET-- C
iii) A - B --FIBER to another building, then ETHERNET -- D
Everything connects to the internet, but (D) on (iii) doesn't allow connection to the server (E). What can I do to make this work?
View 1 Replies
View Related
Jul 29, 2011
I have a new e2500 router and want to use my old WRT54G2 to expand the range of the wireless to reach my detached garage. My house is wired with category 5e cabling, but not the garage, which is why i want to wireless to get expanded. I was hoping the the new e2500 would reach, but it doesn't. How I can do that?
View 6 Replies
View Related
Jan 6, 2012
my E2500 drops the internet connection randomly. I have no issues with wired or wireless access to the home network (sharing files, sharing printers etc...). To fix the problem I log into the router and do a soft reboot from the status page.
I posted this earlier and the only response I received was a cut and paste answer to make some changes to my wireless settings. Seriously doubting the relevance of the post I made the changes anyway and as expected nothing changed, the router still loses access to the internet without any warning. When I replied that I hadn't thought that that was the problem but that I HAD made the changes mentioned and as I expected it DIDN'T work I get no response.
View 9 Replies
View Related
Jan 18, 2012
I am using the E2500 v1.0 on TWC network (road runner) wit a VISTA upgraded to Windows 7 laptop.After few months the router is starting losing connection. I tried connecting my laptop directly to the twc modem and the connection is fine, while if I connect to the E2500 v1.0, through wired or wireless connections, I see that the connection is going back and forth.I tried resetting the modem and the router, upgrading the wireless router firmware, but nothing worked.
View 1 Replies
View Related
Mar 26, 2012
I'm constantly losing wifi connection and having to restart my Linksys E2500 router
View 4 Replies
View Related
Jan 22, 2012
Purchased E2500 1 week ago. I do not have a problem communicating with the router itself (either hard wired or wireless) but I have been unable to establish a usable internet connection from the router.I live in building that is wired by Restech Services - Ethernet jack in wall - no modem. Connection works just fine if I bypass router and connect directly to PC (windows XP SP3 desktop or windows 7 laptop.),Very difficult to establish any internet connection at all. I have to renew IP address many times or go through re-boot sequence multiple times. Once I get a connection it is unusable. If I attempt to ping a URL (either from PC or from router admin page) it is unable to resolve host. If I ping an IP directly (either from PC or router administrator page) I typically get 60 to 80% packet loss. As noted, if I bypass router and make internet connection directly to PC - no problems - no packet loss.Used Cisco Connect software to set up. On advice of ISP changed MTU from 1500 to 1300. Also registered MAC id with ISP and changed from cloning PC MAC to using the router MAC. Downloaded and installed latest firmware version. Did factory reset and re-configured the whole thing. Double checked and swapped wiring.
View 5 Replies
View Related
Apr 8, 2012
I did some testing with a few wireless N routers and then decided to buy a Linksys e 2500 as it was on a special for $66 in Australia.The wireless routers i tested were (Belkin brand new model / Netcomm & Dlink Used ones)1. Netcomm N800n Fastest wireless transfer speed 9MBytes or 72 MBPS.2. Dlink - Around 6MBytes/s or 48MBPS.3. Belkin - Around 4-5 MBytes/secDid not test the Linksys before buying it.4. Linksys E 2500 - around 5MBytes/s = 40MBPS.After all this testing, got a new Linksys believing that a cisco device should have good quality.My problems is that the connection speed on the device stays a 72BPS whereas on the Netcomm / D-link it used to be 130mbps. Not that this bothers me, however the file transfer speed matches the Link status connection speed.The router was placed at exactly the same location, file transfer was checked by transferring large file sizes.Lan setup is1. Belkin ADSL 2+ (Modem with Wireless b/g and Voip) only being used now as an ADSL Modem and VOIP service.2. Cisco linksys e 2500.3. Media centre PC which has a wired connection to linksys e 2500.4. Main PC (Connected wireless to the linksys). The network adapter is a DLINK DWA125 N150 adapter (2.4GHZ only). The distance between the wireless adapter and the wireless router is approximately 12 feet and there is direct line of sight.5. IPAD.5. Using 2.4GHZ as i dont have a 5GHZ adapter yet. Router is only on wireless N mode.I was better off using a second hand Netcomm rather than a brand new Cisco router. The cisco router has 4 internal antennas, whereas the netcomm one had only 2 external antennas. My signal strength is excellent. Only problem is the slow internal transfer between the Main PC and the Media Center PC. Main PC is Core i7 950 where as the Media Centre is a Core 2 Duo e6400GHZ with 4GB Ram. Both PCs running Windows 7 Ultimate (Main PC) , Professional (Media Centre PC). My network knowledge is decent. Is there any settings in the advanced Wireless mode for the Linksys that can make my internal file transfers faster. [code]
View 4 Replies
View Related
Sep 28, 2012
I've bought a "WAG160N v1.0 Annex A" almost 2 years ago. I never used it's wireless feature untill we moved our house. Now it's like 4 month I'm using its wifi feature and I've got to admit I'm really frustrated by its functionality!
For months the modem just dropped wireless connection constantly in various time periods. Somtimes it went like 2 days without any problem but some other times I had to change channel every 15 minutes for it to get back working. And yes it didn't get fix until I changed the channel, otherwise clients had to wait several hours for a 50/50 chance of reconnection. Now It's two days the changing channel trick no longer works. I tried all channels and even put my notebook next to the modem but no luck. The notebook sometimes connnects to the access point but disconnects after a few seconds. Somtimes it doesnt even detect the SSID of my WAG160N modem. Some friends suggested that the wireless hardware of my modem is broken and no longer works but I'm eager to know if it is broken why is it still broadcasting and sending signal.
I've tried everything from upgrading and downgrading firmware to turning on and off the modem several times and changes modem position. And even tried the G-only 20MHz mode.We are at a very crowdy place. Using inSSIDer I could pick about 15 other access points. Only few of them are using Wireless-N, most of them are using Wireless-G.This is the inSSIDer diagram of my WAG160N modem from a client: [code]
View 5 Replies
View Related
Jun 13, 2008
I have a WRT110 router (firmware v. 1.0.04) and a PC and an XBox 360 connected to it (both via cable). Every 15-20 minutes the connection is dropped for appr. 1-2 minutes. I tried modifying several router settings, but the connections are still being dropped
View 9 Replies
View Related
Mar 13, 2011
I have a WRT400N and approximately every 30-45 minutes the router will drop all connections (wired and wireless), all the lights will go out and then power light (far right light) will flash for a minute or so. I have tried connecting directly to my modem and I have no problems at all.
View 7 Replies
View Related
Sep 1, 2011
we got a Sonicwall router and we have been having stability issues. Every 1 minute the TCP connectio is dropped as well as UDP packets. This router is connected to a T1 connection and its requesting a DHCP lease every couple minutes as well. We originally had two WAN connections, and we have disabled the second one because someone thought it was that, but obviously it has to do with the internal network. This is a dual WAN router.
View 4 Replies
View Related
Dec 8, 2012
I've had this router for about 3 weeks. It's only 20 feet from the computer, but my computer on 2 or 3 separate days had trouble staying connected. The signal dropped to 5 Mbps and had a little yellow symbol that said no internet access and when I looked at the properties it said, "limited or no connectivity." I got impatient and purchased a 75 ft Ethernet cable online with plans to possibly return the router as I don't really need wireless anyways and since I spent $100 on this router I expect it to work at 20 ft distance.
For the last few days it has remained at 54 Mbps or more sometimes all the way up to 108 mbps. But now since it got pretty low a few times I don't trust it enough so I might return it anyways.IPv6 connectivity says no network access. This might be because when it asked for administrator password to recognize it as a trusted home network I closed it instead of putting in the password.
View 5 Replies
View Related
Aug 16, 2012
I've recently subscribed to a 100Mbps fibre broadband service with the bundled Huawei EchoLife HG8240 ONT modem and speed-tested it with an achievable speed of almost 100Mbps (uplink and downlink) on my desktop PC.However, when I connect my new Cisco Linksys E1200 Wireless-N Router to it, I noticed the speed dropped by almost half (about 50Mbps both ways) when I conduct a similar speedtest .
note that I'm using wired cable and there's only 1 single PC connected to it and it is not shared. This includes upgrading the firmware to the latest version, disabling the IPV6 setting and configuring QOS.My current hardware/ firmware version is as follows:
H/w ver : 2
F/w ver : 2.0.03
View 2 Replies
View Related
