Linksys Wireless Router :: Intermittent Dropped Connection With E4200

May 25, 2012

Bought an E4200 to replace my Netwgear router and am experiencing the following problem.One of my wireless boxes serves as mu mail server. I've been running this configuration for years so the only thing that has changed is the router.The neworkd is up and all wireless clients can connect, but after some time, access to the mail server just 'freezes'. I say freezes as the nework icon (i'm using ubuntu' still show a connection. In addtion, there are not error in any of the logs. I just seems that the mail server and the router just stopped communication.

View 9 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200 Intermittent Connection With Vaio VPCEE45FB/BI

Oct 16, 2011

my new E4200, replacing an E1000. In my net, at home, four computers are hooked up; 2 DELLs, 1 HP and 1 Vaio. All the computers are working fine with the new router but the VAIO notebook. I've installed the latest Firmware Version, 1.0.03. Done the new drivers on the VAIO. VAIO got intermintent net connection and nothing showed in the event logs. Worked fine with the E1000.
 
Sony VAIO: VPCEE45FB/BI
Windows 7 - 64bits
E4200: Firmware Version: 1.0.03

View 1 Replies View Related

Linksys Wireless Router :: E4200 Connection Dropped Once Homeplug Connected

Jan 3, 2012

I just installed a E4200, and found that once I connected my Homeplug Powerline to E4200, the connected (wired / wireless) computer (with E4200) connection will be dropped.  The connection become normal again once I disconnected the Homeplug with E4200.

View 5 Replies View Related

Linksys Wireless Router :: E4200 Connection Speed Dropped From 2megs / Sec To 100k / Sec

Jul 1, 2011

I got several issues with the E4200.First of all, my connection speed dropped from 2megs/sec to 100k/sec with that router. Flashing it with the lastest firmware worked but still, I don't get all my speed as I has with my WPG54GS (with DD-WRT).Second, speed is really unstable, like if it was working by burst of data.Third, I got a gigabit port on my computer, plugged in the router and still, I can't make more than 10megs/sec WIRED (!) between my computers. I desactivate the ipv6 from my network card but still, no luck.

View 5 Replies View Related

SMCD3GNV Modem / Router Intermittent Dropped Connections

Jul 27, 2012

[code] When the connection is online, the speeds are fine- the issue is the 2-3 times a day when the connection drops off. The error that we are getting is "cannot connect with primary dns server" however in our attempts to restore the connection we have: [code] is there some issues in the area that we are not aware of?

View 3 Replies View Related

Linksys Wireless Router :: Intermittent Wifi Connection With Wrt54g2 V.1?

Apr 25, 2012

My router has been dropping the internet connection for years. The ethernet connection to the desktop works fine all the time. The problem is only with the wireless connection. About every 1/2 hour or so the router will drop the wireless connection and neither or my 2 laptops can find the network. Unplugging the router and replugging it in solves the problem temporarily, until it drops it again. I updated the firmware to 1.0.4 and that yielded no changes.
 
Router: WRT54G2 v.1 Modem: Siemens Speedster 4100 (part #060-D141-A12) My two laptops running wirelessly are Macs. The desktop is PC running Windows Vista.

View 2 Replies View Related

Linksys Wireless Router :: WRT120n - Intermittent Connection For Apple Devices

Dec 3, 2011

I recently upgraded my Linksys wrt120n router firmware & had to reconfigure settings.  Subsequently, some (but not all) of my apple devices are having intermittent wireless connection problems.  Specifically, my ipad1 & ipad2 never lose their connection but a mac book pro (~ 2 years old), iPhone 3g, iPhone 4, older iPod touch & very old i book g4 all work for a period of time (usually 1/2 day) & then lose their connection.  When I attempt to reconnect these devices I receive the following error..."unable to join the network xxxxxx....".  I also have a Dell laptop (1 1/2 yrs old) that generally does not have the connection problem.  Finally, when the devices do lose their network connection all I have to do to reconnect is go to the Linkys router setup webpage & click on save & the wireless connection works again (almost like this is just refreshing the connection for these specific apple devices).  I was not having any problem prior to the firmware upgrade & from what I have read the older firmware version is no longer available so going back to the old firmware does not appear to be an option. 

View 1 Replies View Related

Linksys Wireless Router :: WRT300N Dropped Connection Completely

Jul 4, 2011

I've had this WRT300N for several years and it has worked very well.It suddenly dropped all wireless connections and no one can re-connect.  My main pc is hard wired directly to the router and works perfectly as always.  3 wireless pc's and 3 handheld devices suddenly can't connect. I've powered down my modem and router for several minutes, but nothing changed.  The firmware was upgraded a long time ago and there are no other upgrades available.

View 7 Replies View Related

Linksys Wireless Router :: E2500 - Connection Dropped On Both G And N Cards

Feb 18, 2012

I recently purchased a linksys E2500 for my home network. Occassionally, we have dropped connections, on both G and N cards.The router is connected to a corei3-2100 cpu with 6 gb ram and a 1tb hd, running win7 64bit. Ive bought home plugs for my wife's computer(in the house)and.an outdoor wireless antenna (a CCRANE super usb wifi antenna)  for my computer in the garage. I still get dropped signals in the garage, which is only about 50 ft from the router. My computer in the garage is an AMD dualcore 4400 with 4 gb ram, and multiple hdds.What else can  I do to get a better and more constant connection.

View 1 Replies View Related

D-Link DIR-655 :: Intermittent Wi-Fi Signal Dropped Randomly 1.35NA

Jan 13, 2011

For those of you foolish enough to upgrade to your firmware to 1.35NA, only to find that all your wireless clients are intermittently dropped randomly at the same time, read on.At the time of this simultaneous drop, the logs will tell you that the clients were "disconnected due to deauthorisation" or some such (precise wording eludes me, has not occurred for a while, which is a good thing!). The clients are then quickly "authorised", but the movie you were streaming to your living room has already been interrupted and all your family members have gone for an unexpected toilet / snack break. Needless to say, the movie is ruined. Playing/hosting online games is an exercise in slowly pulling out all your remaining hair folicles. A random 20s delay when surfing the web is also fun. The list goes on.

A quick glance at the forum suggests this is a common problem, with the only reproducible solution to downgrade your firmware, perhaps all the way to 1.21.Get this though, you cannot downgrade 1.35NA by any means known to us internet-using, neanderthal-descendant primates (yes, your ancestor interbred with them). All workarounds to downgrade the firmware currently do not work for the new firmware.Why this is not suggested more often on these forums, I cannot fathom. There are a few threads that end like this though: "Oh, switched to WPS and the problem went away.Of course, if your wireless clients do not support WPS, then, um...facepalm yourself again. Only one of them has to though, the rest non-WPS clients you can copy paste the extremely long password to.Not so important settings: (changing these will do nothing to alleviate the drops)

Now that I have provided you with the meaning to life, the universe, and everything (42, I mean WPS), enjoy "normal" wireless behaviour again. OMG, I can actually surf the internet, torrent, play games, stream movies again.Some far more knowledgeable person might speculate as to the reason why this is so...actually, I will start the useless speculation. There must have been a security issue, that was remedied with the more recent 1.3xx firmwares. At the same time, constant authorisation checks were added. The deauthorisation/ authorisation cycle is snappy and unnoticeable with WPS, yet horrible without WPS.

View 12 Replies View Related

Intermittent Wireless Connection From Router?

Jan 24, 2013

I am using this wireless router for connection to internet:http:/[url]...The problem is that in most of the time the router works without a problem then suddenly without doing anything from my side the internet connection starts intermittent and then I can’t event connect to the router. This is a screenshot of pinging the router when the problem occurs.

View 4 Replies View Related

Linksys Wireless Router :: E4200 Get No Connection At All

Nov 22, 2011

My dad recently got a E4200 router, My whole family are mac users, the connection are all okay with their computers, I'm the only one using Microsoft, ASUS running on Vista. The connection is fine when I'm near the router, but when I go to my room I get no connection at all, it connects for a second but then it goes on connection with limited access.

View 5 Replies View Related

Linksys Wireless Router :: E4200 Not Getting Any Connection Via XP / FTP

Mar 21, 2012

Last week I bought the E4200 thinking it was probably the best router on the market and if it worked properly, it would be...I think.I have attached a Seagate GoFlex Desk 2Tb USB drive formatted to NTFS to the USB of the E4200. I can map to it from my Windows XP computer with no problem and I can FTP to it from any browser...my Windows 7 machine is another story. When I try to map the network drive from the Windows 7 machine I get error code 0x80070035 every time. I've seen some other threads where people are having this problem but in the cases I've found, they aren't getting any connection via XP or FTP either.

View 2 Replies View Related

Linksys Wireless Router :: E4200 - Connection Of V1.4 For Mac

Jan 29, 2012

I have just installed Cisco Connect v1.4 (11266.0), and have upgraded my E4200 software to 1.0.03.I want to add a USB printer connected to the router but when I open Cisco Connect, and select the "Add new devices.....' button, the only option for a printer is 'Wireless Printer' not 'Printer' followed by USB or Wireless as per the User guide.

View 9 Replies View Related

Linksys Cable / DSL :: WAG160N Modem Just Dropped Wireless Connection Constantly In Various Time Period

Sep 28, 2012

I've bought a "WAG160N v1.0 Annex A" almost 2 years ago. I never used it's wireless feature untill we moved our house. Now it's like 4 month I'm using its wifi feature and I've got to admit I'm really frustrated by its functionality!
 
For months the modem just dropped wireless connection constantly in various time periods. Somtimes it went like 2 days without any problem but some other times I had to change channel every 15 minutes for it to get back working. And yes it didn't get fix until I changed the channel, otherwise clients had to wait several hours for a 50/50 chance of reconnection. Now It's two days the changing channel trick no longer works. I tried all channels and even put my notebook next to the modem but no luck. The notebook sometimes connnects to the access point but disconnects after a few seconds. Somtimes it doesnt even detect the SSID of my WAG160N modem. Some friends suggested that the wireless hardware of my modem is broken and no longer works but I'm eager to know if it is broken why is it still broadcasting and sending signal.
 
I've tried everything from upgrading and downgrading firmware to turning on and off the modem several times and changes modem position. And even tried the G-only 20MHz mode.We are at a very crowdy place. Using inSSIDer I could pick about 15 other access points. Only few of them are using Wireless-N, most of them are using Wireless-G.This is the inSSIDer diagram of my WAG160N modem from a client: [code]

View 5 Replies View Related

Linksys Wireless Router :: E4200 Does Not Allow Connection To Certain Website?

Jan 2, 2013

I have an E4200 (v1) with the latest firmware.  For some reason, the E4200 does not allow me to conenct to certain websites.  This is true for wired or wireless connections.To test, I connected a wired PC directly to my cable modem and was able to connect to all websites fine.  I also tried an old D-Link router I had on hand and was able to connect to all sites fine.  Went back to the E4200 and was blocked.  I re-loaded the firmware and same results.

View 4 Replies View Related

Linksys Wireless Router :: E4200 - No Connection To Internet?

Apr 21, 2012

I have my e4200 connected to another modem/router (2Wire 3600HGV), because the other router does not support Wireless N. I can connect to my E4200 network, but there's just no connection to the internet. I reseted my e4200 but still no luck. I've unplugged both routers and replugged them, nothing. I know it's possible because I've had it set up before but I had my 2Wire exchanged for a newer one.
  
Firmware: 1.00.4
 
Just to be sure. I have the cable going from my modem out of port #1 and into my e4200 where it says internet, thats correct, right? On my e4200 i have the IP 192.168.1.2 but on the 2Wire I have the e4200 as 1.92.168.1.66. 

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Way To Get USB Support For Connection

Nov 7, 2011

The web site says that the E4200 has a USB port to connect USB drives and printers.  That sounded to me like multiple devices could be added.  It says nothing about only being able to connect one.  Since I have 3 USB drives and 2 USB printers, that sounded great.   Setting it up, it seems that this port will not use a HUB, and can only be used for one USB device.  How can that be?  That is so limiting as to be nearly useless.

View 3 Replies View Related

Linksys Wireless Router :: E4200 V1 Rebooting / Losing Connection?

Jul 5, 2012

I have an E4200 v1 wireless router.   Intermittently, my hard wired laptop (and hard wired desktop) loose Internet connnectivity and when I look at the 4200 I see the status light flashing slowly like it was just  rebooted.  I am runnong 1.0.04, have reset to factory, reflashed the 1.0.04 code and done a 30-30-30 reset (so far no drops since the 30-30-30 reset but we'll see). 

View 9 Replies View Related

Linksys Wireless Router :: E4200 - Xbox Lost Connection?

Dec 27, 2011

The problem: running a standard single band 2.4gz BT homehub. When using my xbox and wireless headset (razer chimeara) the xbox loses connection. When i tuen the headset off i no longer lose connection. This suggests to me that the headset is simply emitting on the same frequency and bullying the connection, thus the xbox disconnects I have purchased the wireless N adapter to allow the xbox to run on the 2.4 or 5ghz band. I am now looking for a duel band router to allow my xbox to connect to the 5gz band and hopefully this will rectify my interference issue with the headset. I have been lookijg at the e4200 as this supports seperate ssid for 2.4 and 5ghz band, so the xbox can run on the 5ghz and the intererence from the 2.4ghz headset should subside - do you think this would work? Also, with the single ssid duel band routers, where 2.4/5gjz share the same ssid - how would my wireless N devices know to run on the 5ghz and not the 2.4?

View 3 Replies View Related

Linksys Wireless Router :: How To Monitor Connection Speeds On E4200

Dec 28, 2011

All my previous routers have allowed me to monitor my connection speeds however I can't find this in this router.  I found the client table under "status" but I have not been able to find the connection speeds anywhere.  I like to make sure that my devices are running at close to 300Mbps and not 54Mbps in case I have a connection setup wrong.  I have searched in the forums without much luck.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Internet Connection Fails

Jan 1, 2013

I have a E4200 V1 with firmware 1.0.0.5 installed The problem is that when I connect the cable from my modem to my router and recycle both I get a rapidly fashing Cisco light and can not connect to the internet.If I remove that cable and recycle the router my network works but (obviously) I have no internet connectivity.This was working (almost 2 years) without issue until today.I updated the firmware and did a factory reset and neither resolved the issue.My next experiment is to see if I can't get log files (since the factory reset) but I can't do that at this time.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Dropping Connection After Some Time

Nov 15, 2011

I bought a e4200 router about 3 weeks ago and after a power outage it decided it didnt like being connected to the internet anymore. So i got on the phone with cisco they determined the router was no good, mind you my laptop would connect wired. So they sent me a "refurbished" one, so i set it up. The new setup was wonky because it said the same message "Your connected to your router but..." then after trying to get the connection its self and failing it came up with "congratulations you are now connected to the internet". That lasted 3hrs and 45mins then died, so i went upstairs to power cycle it, it decided to connect with the old settings. That lased 25mins then died, so i reset it and reconfigured the router. Wouldnt connect, i checked my mac address and it was using my wireless one and kept turning on my wireless connection durring the install. So i cloned my wired mac address and got the internet for roughly an hour... then it died. So i reset it again and kept the wifi off got it going and decided to go to sleep. I wake up and its still working after 8hrs, i go down stairs with my tablet and i dies again. This time it refuses to reconnect, refuses to reset back up just doesnt want to work.

View 3 Replies View Related

Linksys Wireless Router :: Cannot Setup E4200 - No Internet Connection

Aug 9, 2011

I just purchased e4200 from a friend of mine. Got an issue with setup of this device. I use a model from internet provider. Have 2 computers at home. One is pc with cable, another one mac with wireless.SO my issue is that i can not connect none of them. I was trying to use cd that comes with router but he can not locate a router. When I connect cable directly from modem to computer everything works fine. As soon I connect cable to a router I can not see a router and I can not connect to internet.

View 1 Replies View Related

Linksys Wireless Router :: E4200 USB Printer Connection Not Working?

Jun 21, 2011

The latest Firmware for the E4200 states that there is now the ability to attach a printer to the USB port of the router. I am using a Mac, so that may be the problem,  but I have followed the instructions on how to add the printer and it is not happening. It's possible that the MAC Firmware was not given the ability to add a USB printer like the PC Firmware upgrade.

View 9 Replies View Related

Linksys Wireless Router :: SBG6580 And E4200 - Connection Keeps Dropping

Feb 4, 2011

I just got an E4200 and have a SBG6580 cable modem. I cant seem to set this up properly and my connection keeps dropping. What is the proper set up ? I would like to configure it so the cable modem handles the DNS and the E4200 handles the wireless.

View 4 Replies View Related

Linksys Wireless Router :: E4200 - Connection Drops And Timeouts?

Aug 26, 2012

I have the latest version firmware
 
I am constantly getting dropped and timeouts accross all of my devices this has been hapening for several months now I think ever since I upgraded to 1.0.04
 
It says no internet access when the wired computers have it fine.  Android phones, windows 7 pc, and chromebook. 

View 6 Replies View Related

Linksys Wireless Router :: E4200 Slow Connection Within Network?

Aug 4, 2011

I installed the E4200. Internet works fine, and the internet connection is maximum performance. But if I copy a file between laptops, or to my mediaplayer (AC Ryan HD2), the connection is 3MB/s tops. I changed to the 5gHz and N settings, still no change.

View 6 Replies View Related

Linksys Wireless Router :: Linux OpenVPN Connection Through E4200

Jul 6, 2012

When I try to connect OpenVPN through an E4200 v2 router from my Linux Fedora 16 client, the connection hangs. The connection log show that OpenVPN has connected to the VPN server. Internet also freezes until I disconnect OpenVPN.

OpenVPN on Windows works fine through the E4200 router.If I connect the Linux client directly to my Inteno fiber router, OpenVPN works fine.Passthrough is enabled in the router, and I have configured QoS and port forwarding for port 1194. The router has firmware version 2.0.37.

View 5 Replies View Related

Linksys Wireless Router :: E4200 - It Keeps Dropping Internet Connection

Jan 15, 2012

ever since i had a power failure losing all power in my apartment, my router has begun regularily losing connection to the internet, I have to go into the router and renew ip address which is quite annoying

[code]....

View 6 Replies View Related

Linksys Wireless Router :: E4200 Inbound Connection Timeouts?

Oct 9, 2011

So I recently purchased an E4200 to replace my aging and slightly ailing DLink DIR-655 which as served me well for going on 5 years.  The part of the DLink that was giving me the issues was the wireless, the routing and switching worked fine however.
 
I do quite a lot of streaming of media from my home machine outside my network through the internet.  Most recently I've been using Kalemsoft Media Streamer on my HP Touchpad, however I've used Zumocast, Windows Live, Splashtop, and a few others.  I havent yet tried my PPTP VPN through the router for an extended period of time to see if it reflects this issue as well though.
 
Since replacing my 655 with the E4200 I've started experiencing a timeout issue.  It seems to be semi-consistant and only happens after time of unuse or extended use (I havent timed it yet to see if it always happens after the same amount of time though).
 
Basically what occurs is this:
 
I'll be watching some video or listening to audio streaming from my machine and after a period of time (usually a long period of time) it'll suddenly lose connection, requiring me to re-connect through the software, like the NAT translation is timing out or something.
 
How it USED to work is this:  It'd basically work until I stopped streaming.
 
 My setup:
 
AT&T Uverse set to DMZPlus aiming towards my E4200 WAN port (sitting directly in place of the 655 I used to have)
 
All machines on the network are gigabit.  I have ports 7000 and 7001 open for Kalemsoft Media Streamer on the E4200 per the specifications of the software.
 
The software understands UPnP so I have nothing specific forwarded on my machine, but I didnt previously either.

View 4 Replies View Related

Linksys Wireless Router :: E4200 Dropping Connection While Browsing?

Jan 2, 2013

I have e4200 router and i notice sometimes when i  am browsing that dops connection.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Could Ping But No Connection On Any Hosts

Nov 28, 2011

I purchased this router a few days after its release, and I was very impressed with its functions. I came from a DD-WRT flashed router with all the bells and whistles, and the E4200 lacked some features but I felt it was a fare trade off for the GHz & dual band.All was well with all my settings (quite a few to name QOS,forwarded, etc)I also updated the firmware when it came available and re entered same settings.

 Approx 3 months after use I had 0 WAN connection via eth0 or WIFI, when I logged into router I  was pulling a Public IP from my ISP. I could ping from inside the router but no connection on any hosts, very strange. Powercycling Modem/Router yielded same results.. I then backed up my vast amount of settings, and did a 30/30/30 reset.. With no configs I had no issue browsing on any host on my network. So I restored from backup and the issue was back again..So I did another 30/30/30 reset. Then went and reentered the exact same settings as before and the issue was gone.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved