Linksys Wireless Router :: How To Secure Router WRT100
Nov 12, 2011How to secure my router WRT 100 again...
View 4 Replies
ADVERTISEMENT
Linksys Wireless Router :: How To Re-set Up WEP Security On A WRT100
Apr 17, 2012I'm visiting at my aunt's house and her Linksys was not working properly, so I reset it to factory default, and it's working now, except now I cannot seem to find the how-to page on how to set up the WEP security again (or another security variation...whatever is appropriate now for a home-based router).
View 1 Replies View RelatedLinksys Wireless Router :: WRT100 Model Is Compatible With Windows 8?
Feb 28, 2013Does WRT100 model is compatible with Windows 8? Everytime I connect my laptop all the other devices drop their connection.
View 2 Replies View RelatedLinksys Wireless Router :: WRT100 - Internet Gateway Connection Disabled
Aug 3, 2011I had to restore my laptop yesterday and i reset my router (WRT100). I ran all the Microsoft updates, but I didn't do anything with the router other than going to the Linksys site to try to make it secure. My computer seems to be recognizing the router (although it is still saying it is an unsecured connection) but I cannot get on the internet. The problem seems to be when I pull up the Network Connections window the "Internet Gateway-Internet Connection" is showing disabled. I cannot enable.Everytime I try, it says "connecting...Connection failed!". I can plug the ethernet from the modem to the computer and it works and the "Internet Gateway" doesn't appear, but when I try through the router it does. I want to set up the router because I have two computers that need internet access.
Three connections are listed--Wireless Access, LAN, and 1394 Connection. All are listed as connected, firewalled.The second computer is also giving me a problem. There is the wireless issue, but when I connect the ethernet from the computer directly to the modem I am asked if I want to connect via Broadband and am asked for a username/password. There is no username/password. I've contacted my ISP (Cox cable) and confimred there is no password.
Linksys Wireless Router :: WRT100 - How To Disable Automatic DNS Name Service Configure
Dec 9, 2011I have a WRT100 wireless router, which is configured for a PPPOE connection to my ISP. After running one of the tools to determine responsiveness of DNS name services, I would like to manually configure my DNS services, placing a more responsive service as my first DNS choice. In the router administration, I can configure three static DNS IP's. However, I don't see any place in the configuration to turn off the automatic DNS configuration from my ISP. So, when I issue an IPCONFIG /ALL on my computer, the DNS listing shows two DNS Name Services from my ISP ahead of the three static DNS IP's that I configured.
View 3 Replies View RelatedLinksys Wireless Router :: E1000 Secure And Non-secure Hotspots
Jul 12, 2011When setting up my e1000 router for a secure domain it automatically opened a non secure one that my neighbors are using. How can I cancel it?
View 2 Replies View RelatedLinksys Wireless Router :: How To Know If WRT54G Connection Is Secure
Jul 8, 2011My friend walked in with his laptop and connected easily.Yet is said it was not a "secure" connection.How will I know if MY computer has a secure connection?
View 1 Replies View RelatedLinksys Wireless Router :: BEFW11S4 Ver 4 How To Secure Network
Jun 15, 2012I have a model number BEFW11S4 ver 4 Wireless-B router that I got second hand. There is no setup CD. I need info about how to secure the network. Just simple password protection. I'm on an old Mac PowerBook G4 OSX 10.4.11.
View 4 Replies View RelatedLinksys Wireless Router :: Can't Connect To Secure WRT54GS2 V1
Jul 9, 2011I just moved in with my friend and i'm having trouble connecting to wireless router linksys WRT54GS2 V1. My roommate can connect his laptop and desktop to the router wirelessly, but my iphone and laptop can't connect. I've tried both of my devices on a wireless network at a friend's house, and both worked fine. We even changed AND removed the password and it doesn't let me log on the internet.
View 5 Replies View RelatedLinksys Wireless Router :: BEFW11S4 - Need To Set Up Secure Connection
May 8, 2009My ISP was unable to facilitate me, and neither was Linksys chat. I've searched and found many step-by-step guidesm kind of at my wit's end here.Right now when I connect wirelessly to the internet, it jumps on a connection labeled "linksys," which is my wireless router (BEFW11S4 ver. 4). It used to connect to "Jason" (me) but that's no longer a valid connection for some reason. I cannot for the life of me figure out how to set my connection back up properly and secure it as my own.
View 4 Replies View RelatedLinksys Wireless Router :: WRT54GS Can't Secure Network?
Jun 26, 2011Recently I had to reconnect my WRT54GS linksys router and now it is unsecure, obviously i know how to secure because i've done it before but it isn't letting me...Whenever I type 192.168.1.1 into my browser it will not load the page and it is really frustrating. I have also tried typing in my Default Gateway and ip address that I got from cmd/ipconfig and those will not work either..I'm not understanding why this wouldn't work, and yes my internet connection is fine and nothing is wrong with my browser..
View 6 Replies View RelatedLinksys Wireless Router :: How To Get Secure Setting For WRT54GS2V1
Nov 4, 2011I just moved and my set up disc for my WRT54GS2V1 is in some box in some abyss at this point. My network is not secure and I want to secure it. My linksys also runs my cable. How do I make my network secure? I have Vista (not sure that matters) and a PC. I tried to follow some instructions here but I typed in IP config in my top bar and didn't get any local address..
View 3 Replies View RelatedLinksys Wireless Router :: WRT546 Won't Connect To Secure Network
Feb 9, 2012My linksys used to always connect toa secure network, (secure network does show up in network list) BUT the linksys will only connect to unsecure shown network. How do I get it back to connecting to the secure network?
View 1 Replies View RelatedLinksys Wireless Router :: EA4500 - Way To Secure Guest Network
Nov 2, 2012I just installed my EA4500 router and it was amazingly simple. My only question is it shows two wireless connections available: The secured one I set up and the another network with the same name that says "guest" and is NOT secured. Is there a way to either disable the unsecured guest network or to secure the guest network?
View 2 Replies View RelatedLinksys Wireless Router :: WTR54G - Secure Easy Setup
Nov 7, 2006Trying to setup a wrt54g wireless router using the secure easy setup but am receiving the error message :"Secure Easy Setup requires that the Wi-Fi system application be installed a current version.
View 4 Replies View RelatedLinksys Wireless Router :: E4200 - Guest Access Not Secure
Nov 13, 2011Purchased E4200 this week and did simple setup via CD setup (Cisco connect). Set up main name and password. Cisco Connect assigned "-guest" to end of main name for the guest account. Gave guest account its own password. Both main and guest accounts were broadcasting OK -- but guest account was not secure and could be accessed without password. (All software and firmware upgrades were done during initial setup).Reset the E4200 and restarted things from the CD setup. Created main account, main account password, and guest password again. In advanced settings, left basic wireless settings at initial settings, changed wireless secutiy to WPA2 Personal. Still having the guest account being broadcast in unlocked status. (Have turned off guest access for now until I can get password protection for it).
View 1 Replies View RelatedLinksys Wireless Router :: WRT160N Is Unsecured - How To Get Secure Connection
Dec 25, 2010I had a secure connection, after trying to change the passsword, it now is unsecured. I was trying to connect a new Ipad to my router but I have failed miserably.
How can I get my router a password and then use that password to connect an Ipad to my home network? I reset the router, but the connection is unsecured, I can't figure out how to get it back.
Linksys Wireless Router :: WRT54G Listed As Secure But Would Never Connect
Jul 16, 2011I recently had an issue with my laptop that required a complete reinstall of windows. As if this wasn't bad enough, I lost the password that I had for my router. Thinking it was no big deal I just went ahead and reset the router back to factory settings assuming I would be able to set up a network and encrypt it as I had before. Just testing the functionality, I was able to access my router while it was not encrypted and with the DSL modem plugged in, I also had internet access. I did this both wireless and with Ethernet cable.
Happy to see this, I decided it would be a good idea to re-encrypt my router to prevent any outside access. So as I had done before I went to the setting page where I set up a network with a web key. The only thing I entered at all was the paraphrase for the key then saved the setting to test it out. I refreshed the available wireless networks and mine was there and was now listed as secure. I then proceeded to click on the network, entered the key, and then waited for it to connect. The problem is, it never would connect. It continuously tries to connect, and says it is trying to "acquire the network address" but never does. Since then I have been on the hunt trying many different suggestions I have seen online, but none of the situations were quite like this one.
Linksys Wireless Router :: Secure Network With WRT54g2 V1 Not Showing Up
May 15, 2012Had a secure network with my model wrt54g2 v1 router, then suddenly it's not showing up. All I have is a unsecured Linksys way on to the Internet. How can I get this back to my secure network?
View 7 Replies View RelatedLinksys Wireless Router :: WRT5462 - Make A New Password And Secure It Again?
Dec 7, 2011Password would not work, had to reset to factor. How do I make a new password and secure it again? WRT5462
View 4 Replies View RelatedLinksys Wireless Router :: E3200 - Secure DDNS Password?
Mar 7, 2012The E3200 router supports DDNS updates to DynDNS.org but I'm unable to determine if the password is sent securely or not. According to their website, [URL] The API works over HTTPS and HTTP. How do I know which protocol is applied when sending the password?
View 2 Replies View RelatedLinksys Wireless Router :: WRT 300N - Can't Print When In Secure Network Mode
Jul 20, 2012I have a WRT 300N router. I can print when I am not in security mode, but cannot when the router is secured. Using a HP Deskjet 3050A printer
View 4 Replies View RelatedLinksys Wireless Router :: WRT610N - HTTPS Secure Login To Admin Page?
Mar 29, 2013I am trying to log into my WRT610N version 2.0 Router admin page 192.168.1.1 using the secure HTTPS://192.168.1.1 protocol I have the router local management setting to allow both http and https access login:192.168.1.1/Management.asp I am using Microsoft IE version 10 and Firefox version 19.02 and latest Chrome browsers and none of them will work using the HTTPS protocol.This used to work in the past using older versions of the browsers though I would see a certicificate error warning.I have 2.00.01 build 15 firmware installed and I already tried reseting the router. Perhaps the router needs new firmware update to handle this with the latest browsers?
View 6 Replies View RelatedLinksys Wireless Router :: E1000 With 2 Networks - How To Make Guest Address Secure
Dec 31, 2011Having just installed the E1000 why have I got a public network address '####' which is security type WPA2 -PSK and also public network address '#### - Guest' which is security type - unsecured.Anyone can log onto either wireless network connection but only with the correct password.How do I remove the '####' address and also how do I make the '#### - Guest' address a secure one.
View 1 Replies View RelatedLinksys Wireless Router :: Kindle Fire Unable To Connect To Secure WPA2
Jan 24, 2012I have kindle fire that is unable to connect to the wireless network.All otehr devices windows phone, xbox and laptop are able to connect seamlessly.Amazon also sent me a replacement, but the issue is still the same. The error is:
"Unable to connect to the selected access point, Please check the password you provided."
Also, I removed the security on the network to see if its able to connect without password.The state where it fails is Obtaining IP address and it fails again.
Linksys Wireless Router :: EA4500 - Network Drive Only Works Without Secure Folder Access
Feb 2, 2013I'm trying map the USB hard drive connected to my EA4500 router as a network drive in Windows 7, and it works perfectly until I enable secure folder access on the router.
After enabling secure folder access, and not changing any other settings on the router I first unmount the drive since it was set up without credentials and doesn't work that way any more. When I try to remap the drive I use the same address, but select "Connect using different credentials" When it prompts me for the log in info I try using the router admin account, but it fails to connect. Windows network diagnostics tells me the device refused the connection. I proceeded to set up an account on the router under the folder access settings with the same username, and password I use on my computer, and tried to connect it without checking "Connect using different credentials" (And typing them in manually if that matters) with the same results.
Even with secure folder access enabled I can still reach the drive just fine by typing "ftp://192.168.1.1/" into file explorer. It prompts me for a username and password, I put in the admin credentials, and I'm in. Even the account I created with the same username/password as my computer works this way.
After disabling secure folder access everything works perfectly fine again... I would MUCH rather do this with it though.
Following these directions: [URL] When clicking the browse button the router shows up when secure folder access is disabled, but does not after it is enabled. I've looked through my windows sharing settings, and haven't noticed anything that should cause problems, pretty much everything is enabled. I've also tried turning off my firewall with no success.
Linksys Wireless Router :: Befsr81 V.3 - Missing Security Feature To Setup Secure Wifi Password
Mar 11, 2013i have a Linksys modem BEFSR81 v.3 and am trying to reset my wifi password for secure connection. When i log into the the admin page, to my surprise, I could not find the security feature to create WPA or WEP password. i'm stumped. This has never occurred to me before on this modem.
View 6 Replies View RelatedCan Only Connect To Linksys Router If F-Secure Firewall Turned Off
Sep 25, 2012Cannot connect to Linksys Router 192.168.1.1 Webpage. I can only connect if I turn off my F-Secure firewall
View 1 Replies View RelatedLinksys Wireless Router :: WRT54G - Not Connecting To Laptop While Making Network Secure Laptop
Sep 5, 2008I have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies View RelatedRouters / Switches :: Secure Linksys Router So Only Laptop / Desktop And IPad Can Use It?
Jul 8, 2011How to secure router on my mac - neighbor tapping into my internet service. How do I secure my Linksys router so only my laptop, desktop and iPad can use it? I tried going to 192.168.1.1 but got nothing?
View 5 Replies View RelatedLinksys Wired Router :: RVS4000 - Secure Web Access Without Installing Other Software?
Mar 15, 2011Does it support SSL VPN? As I would like to have secure web access without installing other software.
View 1 Replies View RelatedIBM Thinkpad Will Not Connect To Secure Wireless Belkin Router?
Oct 14, 2011My IBM Thinkpad will not connect to our secure wireless Belkin router
View 1 Replies View RelatedRouters / Switches :: Wired Router Is Upstream Of A Wireless Is It More Secure
Dec 22, 20112 routers in series, is one more secure. I recently asked about setting up two routers in series as routers, one wireless one not. It was my understanding that the computers on the second router would not be visible to computers on the first router, the wireless one. My assumption was that this would make it more difficult for someone who got access to the wireless router to also access those computers on the second router.
View 3 Replies View Related
