I'm visiting at my aunt's house and her Linksys was not working properly, so I reset it to factory default, and it's working now, except now I cannot seem to find the how-to page on how to set up the WEP security again (or another security variation...whatever is appropriate now for a home-based router).
View 1 RepliesDoes WRT100 model is compatible with Windows 8? Everytime I connect my laptop all the other devices drop their connection.
View 2 Replies View RelatedI had to restore my laptop yesterday and i reset my router (WRT100). I ran all the Microsoft updates, but I didn't do anything with the router other than going to the Linksys site to try to make it secure. My computer seems to be recognizing the router (although it is still saying it is an unsecured connection) but I cannot get on the internet. The problem seems to be when I pull up the Network Connections window the "Internet Gateway-Internet Connection" is showing disabled. I cannot enable.Everytime I try, it says "connecting...Connection failed!". I can plug the ethernet from the modem to the computer and it works and the "Internet Gateway" doesn't appear, but when I try through the router it does. I want to set up the router because I have two computers that need internet access.
Three connections are listed--Wireless Access, LAN, and 1394 Connection. All are listed as connected, firewalled.The second computer is also giving me a problem. There is the wireless issue, but when I connect the ethernet from the computer directly to the modem I am asked if I want to connect via Broadband and am asked for a username/password. There is no username/password. I've contacted my ISP (Cox cable) and confimred there is no password.
I have a WRT100 wireless router, which is configured for a PPPOE connection to my ISP. After running one of the tools to determine responsiveness of DNS name services, I would like to manually configure my DNS services, placing a more responsive service as my first DNS choice. In the router administration, I can configure three static DNS IP's. However, I don't see any place in the configuration to turn off the automatic DNS configuration from my ISP. So, when I issue an IPCONFIG /ALL on my computer, the DNS listing shows two DNS Name Services from my ISP ahead of the three static DNS IP's that I configured.
View 3 Replies View RelatedHow to secure my router WRT 100 again...
View 4 Replies View RelatedI have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies View RelatedHow do I get the security key off one laptop so a 2nd lap top can sign on?
View 2 Replies View RelatedHow do I add security to my Linksys 3000 wireless router?
View 6 Replies View RelatedIs mac no net key
View 1 Replies View RelatedWhere do I find the security key for the router as there are a series of numbers on the router and the box. Which one is the security key as it's not identified as such?
View 1 Replies View RelatedHow do I find my Linksys wireless router security key?
View 1 Replies View RelatedDoes the E1000 router come with a default security setting upon installation using the supplied CD?
View 9 Replies View RelatedHow to connect laptop#2 to wireless router when you donot know security key code?
View 2 Replies View RelatedI believe I have the router connected to the computer but its asking for a security key and I dont know where to find it?
View 1 Replies View RelatedI successfully cascaded a WRT54gs V6 router to a LinksKey wired router LAN to LAN. My concern is I get a warning on my one computer saying it is an unsecured connection. I have not seen a way to go in and make any kind of security settings. Most of the files on my main computer which is connected via the wired router are labeled as private files.
View 9 Replies View RelatedHow do i enable security for my wireless WRTP54G?I
View 1 Replies View RelatedI have a WRT54G router, and when I am in the security area, where you choose WPA, WEP, etc... I keep clicking the dropdown menu, and when I choose anything BUT disable, the security auto-sets back to disable. I have rebooted the router. I have rebooted the modem. I have changed my router's password.How do I turn my WEP back on without it just saying. Also, for additional notation, my US light on my modem is no longer green, it is orange since this issue has occured. Is there any connection that might be related to this?
View 8 Replies View RelatedI recently upgraded the OS on my laptop to Windows 7, which wiped out most of my older Vista settings. When I try to connect to my home network, I am prompted for a security key (network key?). How do I find the security key? I can't find any of the paperwork that came with my router.
By the way, I am currently using my desktop, running under Windows XP.
I purchased a new router and it doesn't have a security key. I can't connect my blue ray or roku.
View 1 Replies View RelatedI've had this E4200v2 for a while now, and it's been giving me a headache because even at default wireless setting with the passphrase, it literally won't ever connect from a linksys wireless adapter using the mixed WPA2 Personal or the 'EasyConnect' button feature or the PIN, with both side's fireware updated to the latest. There is no issue connecting to the router as long as the security is off. I've tried other form of encryption to no luck.
View 1 Replies View RelatedHow do I set a security password.
View 1 Replies View RelatedI have a Linksys WRT330N router running firmware version v1.00.3.It currently is running WEP security but I want to secure it even better but dont know how to get it set to WPA2 security.
View 7 Replies View RelatedMy wife has a laptop that we want hooked up to the internet through our linksys wireless router. But I cannot remember my security key or passphrase needed to get her on the connection. How do I recover, or find, it?
View 9 Replies View RelatedFound out if you make a ftp user called root you get access to your flash drive in via ftp it is normal or a bug ?
View 1 Replies View RelatedHow do I find security code for my router. It is out of warranty and live chat will not supply it to me. Is there a default code ?
View 9 Replies View RelatedFirmware is 1.52.0. Model is WRT54GS.I'm configured with WPA2-PSK/AES. Broadcasting my SSID. No MAC access filtering.HTTPS access only to the config pages. Custom (not default) password. Remote management disabled.
Summary:The router simply "forgot" its assigned SSID and reverted to broadcasting as "linksys".It also ceased encrypting its broadcast.I was able to log in and change it back. It retained many of the OTHER settings I had previously configured.
Details:Two days ago, I noticed my client (laptop) could no longer see the usual SSID that I connect to on my home network.However, there was a new SSID in the area, named "linksys", broadcasting UNSECURED.Coincidentally, this new "linksys" access point had the exact same signal strength that my usual access point typically had.So, I connected to it, you know, just to see.I was only able to access the config pages at my custom IP address (not at x.y.0.1), prefixed with the "https://" scheme identifier.And it didn't prompt for a password. Hopefully because it recognized the cookie my browser still carried from the last time I logged in to it. But maybe because it had temporarily dropped ALL of its security measures...It was definitely my router. Just, stripped of its usual encryption/authentication and its usual SSID.So, I switched the SSID back to what it usually is.And I turned the WPA2-PSK/AES encryption back on.The router "remembered" my WPA2 passphrase, which it displayed to me as plaintext when I pulled down the "security mode" dropdown menu and selected "WPA2 Personal".After re-configuring, it works as well as ever.Is this a known security flaw in the WRT45GS? Because....it seems like a fatal one, as far as network security is concerned.Is it limited to one firmware release?
my mother in law thought she forgot her wifi password so i tried to do a reseti reset it then no internet at all and could not access the router gateway page (192.168.1.1)I had to set the internet protocol to default and 2 power cycles later i can access the internet.Then i used the linksys disc to set up the security and now it doesn't work can't access nothing through ie.
View 1 Replies View RelatedI have a Linksys E1000 wireless-n router. I bought the router originally so I could get my Nintendo DS on Wi-Fi. I then realized that DS games require a WEP Key, but my E1000 defaults to WPA/WPA2 mixed mode. My laptop and my Wii connect online with the default settings just fine. My 3DS also seems to be able to connect with the internet router, but not Wi-Fi, for some reason. So when I'm on Cisco connect, I go to Router settings, it brings my web browser to "http://192.168.0.1". From there I go to the Wireless tab, and then click on Wireless Security. I've tried multiple times to change the Security Mode to WEP, and even disabled security. But after I save the settings, the connection on my laptop is lost, and I have to reboot my router all over again, and am back with the default WPA/WPA2.
View 1 Replies View RelatedEverytime I boot up my Winows 7 desktop the new E900 requires a security key to login.
Can't seem to get the settings right to automatically login like my laptop does. Routers can be humbling.
I have a problem viewing my security cam on my android IP cam app.I forwarded port on my router to my security cam then fixed security cam to have a static IP but my computer being on DHCP, after reboot changed IP, so I lost connection to android IP cam app.I read on a forum,that If your camera is using DHCP,setup your router so that it always gives the same static IP address for the camera based on it's MAC address but where do you set this up a Linksys E1000 router & on Samsung Y? so I can view my security cam on my android IP cam app.?
View 9 Replies View Relatedi want to set up a security password for my ciscoWRT54G2 V1.5, but when i go to the setup page click on wireless security and choose WEP it says disabled over and over again..
View 5 Replies View RelatedInstlling WPA2 on my router I had this router WRT54G ver 6 for several years and it works perfect only thing is I have no security on my n wireless
View 3 Replies View RelatedI have a WRT160N that I've been using with my HDTV for months. Now I want to connect a BluRay player to it, but the setup requires me to enter a security code, and the one I had for the router doesn't work. Can I change the number, or at least double-check the number I do have?
View 4 Replies View Related