One of my computers suddenly is "connected with limited access" to my wireless network. That computer is operating with Windows Vista. The router I'm using as Model WRT-160N V3. My second computer, operating with Windows 7, has complete access; it's the computer on which I'm working right now. I have reset the router (unplugging everything and waiting 15 seconds before plugging in again), and I have rebooted the other computer. I suspect that somehow some of the applicable settings have been modified on the affected computer, but I don't have the knowledge about what the settings should be or where they are maintained.
I'm connected to the internet with a bullet M2 and when I connect directly I have internet access. When I connect my linksys 160n router and plug in my computer I show a connection but can't access the internet. I can ping the bullet and my computer from the router and get a response. I've also borrower a wrt54g router from a friend and have the same problem, The bullet is in bridge mode. My computer is running xp pro.
I'm using the WAG 160N as bridge to connect to Du Broadband. I changed the setting to bridge and its working properly. However, once turn on the cable TV. The internet connection to wireless gone. How to solve this? Is the WAG 160N suitable for Du Broadband?
I have an E3000 Dual Band. Currently, I have 3 laptops and two 360s on our network. They work fine. Up until last week so did my other kid's computers. They came home from college and attempted to get on our network unsuccessfully. In their network and sharing center, both their computers say under view your active networks: unidentified network (public network). Access type: No network access. Connections: has the correct network name information. When they attempt to access the network with the correct password, they show 4 bars of reception and a message of limited access (along with the above message). I did a little checking and found that our router info differs from their auto configuration. Our IPv4 starts with 192 not 169 like thiers. Also, the subnet masks are different. Also, they have no info in the IPv4 default Gateway, IPv4 DNS Server, and IPv4 WINS Server. Finally, my wife tried to acces the network with an ebook reader. It shows secured WPA2, but won't access it.
I am having trouble with a Vista Dell Inspiron 1525 laptop that says it is connected to my Linksys router, but has limited connectivity. It's this way with both a wired and wireless connection. I have 4 other computers in the house that all connect with no problems. The Dell laptop connects in safe mode, but won't connect when in normal mode
I have a laptop with a wireless connection to a netgear router. My Internet work perfectly, however after a certaiN amount of time I can't access the Internet although it still stats that I am connected. It reads " connected with limited access". I then have to restart my laptop to gain Internet access again. I have other computers and laptops and tablets that don't share this problem.
I use a laptop and recently the wifi has stopped working for me. I can still connect completely but it says with "limited access," which results in me being unable to access the internet at all. The rest of the computers in the house work fine on the wifi and I double-checked the securtiy settings (WAP2 and all that) and it seems fine. What can I do? Tethering to my phone allows me to get on the internet and the computer connects successfully, but no websites will load whatsoever.
I have connected my laptop to many many networks, but this is the first time this happened. I went to my moms today, and triied connecting but it only says limited access and full bars, and sometimes it doesnt even say its limited access...I have restarted modem Deleted network file (or whatever yhou call it, its in manage network. makes it like ive never joined it)Checked if connection switch was off on my laptop (Wasnt)Disconnected and reconnected multiple times Cry a little And restarted computer .What can i do?
My laptop will not stay connected to wifi for more than a few seconds before 'limited access' appears. It connects and disconnects repetitively.i have a 3mobile wireless dongle. Other laptops stay connected no problem and i am always beside the dongle with full coverage. if i click the network icon several times on the bottom right it reconnects for a few seconds again,I have discovered that if i run 'funkypool' in the background the connection generally stays, but not 100%, but 90% anyway.this may possibly be because its java and always refreshing itself i think. it doesn't matter whether or not im plugged in or using battery but i did change the controls for automatically putting the wireless to sleep mode so i doubt that unless ive done it wrong.
I recently took my Dell Inspiron1545 out of sleep mode and my wireless internet connection no longer works.i have tried power cycling the 2-wire modem and the Cisco Valet router and resetting as well. I also have another laptop and xbox that use this network and are having NO issues in connecting and working perfectly fine.
The only device not working is the Dell laptop. I've tried removing the network profile, uninstalling the wifi driver and reinstalling after powercycling the computer and still nothing but limited connectivity only The WLAN utility has stated that the "Gateway IP Ping" has failed Now the laptop will connect to internet via LAN cable however will not to WiFi
I have attached the IPconfig spec sheet and hopefully somewhat can steer me in the right direction and get me back up an running.
The last few weeks my WAG 160N stops accessing the internet perhaps four or five time a day. Pulling the power plug for 20 seconds and reconnecting it usually gets it going again - until the next time.
Also I have noticed the internet light - the right hand LED - is red every so often. The gateway is behind my PC so I haven't been able to see if it always correlates withe the lack of connection.
Linksys Wireless router connected but no access to the internet. I do not have a modem in my flat from ISP, only a cable, since the internet is set for every apartment in the building. I have a username and password that I use to connect. There is no problem connecting with the cable. I set up by Belkin wireless router and I'm actually connected to internet wireless but it only works if I also enable the primary ISP connection on my computer so my laptop is connected to internet without a cable. But this weird connection does not allow me to connect my phone to wireless or any other computer. Also the router settings site says not connected to internet and the internet light on Belkin is off.I have a Slovenian ISP -Amis, cable connection and Belkin Wireless modem, Avira Free antivirus.
I have a hardwired HP computer with no problem connecting. The remainder of my wireless devices will not access internet. No problem until about 3 weeks ago then all of a sudden it stopped. All wireless devices detect the router/network, but will not allow access to the internet.
I have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!
i have a WRT54G2 and i have it plugged in. i want to avoid downloading things but i had this thing working a month ago, it says its connected but no internet connection.
I've looked through the forums and FAQs and haven't seen anything that resolves my issue. I recently moved from the US to Japan. I had my WRT54GS set up in the States and the network worked fine. When i got here, i set it up, hard reset the router and set up a new network.
I can access the internet when connected through the router via ethernet cable, but I cannot connect any of my wireless devices. Easy Link Advisor says "internet connection is not working" but it is. I have two computers connected via cable and they both work so it is not an issue of my ISP allowing multiple IP addresses.
My wireless devices (XBox, PS3, laptop) can see the network but cannot connect through to the internet. I also just noticed that the "wireless mode" according to the EasyLink Advisor says "disable", however the wireless settings on my 192. server webpage is set to "mixed" and seems to be correct in all settings to be on.
The HD connected to my X3000 Router is recognized and visible (shared folder) from my media player connected to my TV. However I can't see it from my computer to add/remove files. Isn't it possible to administer the files on the drive without disconnecting it from the router and connecting it to the computer?
I'm using linksys WRT160NL router and it works fine with 2 laptops, but other 2 laptops have problems with disconnecting from network and them it says Limited access internet. It's happening very often and especialy when downloading.I updated firmware and tried different channels, didn't work. Network mode is Mixed, could this cause the problem? Could it be problem with internet provider?
I connected my desktop with n300netgear -router. It was working fine until I reset it.After that I am facing this problem of not able to access internet. It shows limited or no no connectivity. But when I plug the internet cable directly to my desktop its working fine. When I connect it via router.
I have am unable to access the Internet via my modem and router. My computer recognized the connection from my router. My modem is a Motorola 12DVC. My router is a Linksys Broadband Wireless-B BEFW11S4 version 4. I tried several things, including changes via 192.168.1.1. I am using an AT&T DSL connection. The router has only been used one time.
Here is some other information:
Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:Documents and SettingsJim>ipconfig /all
My main pc is running Windows 7. It is also running MS Windows firewall and anti-virus. It connects fine to the internet via an ethernet connection to the WRT610N.
I am trying to access the internet wirelessly from another pc running Windows XP. The wireless pc indicates it is connected to the network with excellent signal strength. It will not connect to the internet. I can successfully ping the router but it is unsuccessful when pinging an internet address.
An additional wireless pc (WinXP) and my phone (Android) also show connected to the network but will not connect to the internet.
These wireless computers used to be able to access the internet before we moved house. They only thing I think that has changed is the addition of Windows firewall and anti-virus. It may however be something else.
I use a E2000 as a wireless access point to the Internet, by connecting the LAN of the E2000 (set for x.x.x.5) to the LAN of an RVS4000 (Set for x.x.x.1). The E2000 is set for Automatic Configuration, and everything works fine..... Until a power failure occurs... Then, after everything boots up again.. I get the "NO INTERNET" prompt on the wireless....
By using Ping Plotter, from a computer on wireless end, and another computer with Ping Plotter on the wired side of the x.x.x.1 LAN, I've determined that it's the E2000 that has disconnected from the RVS4000.
I have found a work-around, though....No matter How the setting boots up, If I toggle away from and then BACK TO: NAT DISABLED in Advanced Routing, Everything is back operational..... Until the next Power Failure....
Is there any way of making this Automatic.
In another forum, there was a suggestion of putting the E2000 in Bridge mode in WAN settings... I can't find it....
I installed an E1200 wireless router yesterday and everything worked fine. However, I happened to turn off the modem overnight and now my computer indicates (under Wireless Network Connection) that I'm connected, but above (under Currently Connected To) it says that I have No Internet Access. I tried turning off the modem, router and computer and turning them on again in that order, but that didn't work. Do I need to do the set-up again ?
WD essential 2GB hard drive connects OK through cisco connect but when I click on the shortcut or try to access the drive I get access denied duer to permission to the ip address
I just moved in to a new place and have connected my Wireless router (WRT610N) to my switch located in the smart panel in the basement (SE2500). Plugging my ultrabook in to the wall confirms that the signal from the switch in the basement is being sent up, however if I plug my wireless router in to the jack and connect to the wireless router I have no internet access.
I am using the cisco linksys E1200 WiFi router. when ever I connect my laptop to WiFi, its show Limited connectivity/Yellow Caution sign when connected.
I try to reconfigre it & also in factory default mode it show same.
So, I restarted my linksys router (WRT54G model) yesterday because of some issues I was having. Right now, I have full bars for connectivity on all my devices (Acer Aspire laptop running Windows 7 starter) when the Ethernet cord is connected from the modem to the router, but I have no internet access. Only when my laptop is connected directly to the modem, I have access to the internet (but ofcourse no wireless).
I have a Cisco Linksys AE2500 wireless adapter and a Cisco Linksys e2500 wireless router.
For the most part I seem to be able to connect to the internet with no problem. But whenever I stream video to my PS3, my phone, Kindle or when I start using a lot of bandwidth my internet drops and I get the "limited access" message with the yellow <!> symbol. It still shows full bars and excellent connection, yet cant get onto the internet?This happened with my PC at my old house, I forget was I did to fix it though? If it matters though I can connect fine to the internet from my Laptop and my other devices.
I have configured 2 RV042 VPN with different ISP. Tunnel connected successfully and i can ping each other router but i can access clients which are connected to router. I have added rules also in firewall.
