Linksys Wireless Router :: WRT120N Wired Giving No Internet Access
Oct 31, 2011
I have a problem with my Router WRT120N wen I connect to router with wireless are wired it`s not giving me Internet access but the light on the router of Internet is ON if I put the internet cable directed to my computer give me internet.
Just bought first wireless router, when i insert CD and start setup, after a few seconds i get Error 301: internal error. i have rebooted and still no luck. I've tried going to 192.168.1.1, i got in one time but didn't understand half the stuff. now i can't go back into that page.
I have recently bought a new XPS 15Z Currently when I surf the internet I am unable to use the browsers ( IE9 or firefox ). I am able to use non-broswer related internet applications like STEAM, MSN or QQ with no issues in terms of speed or stability. But when I use my browsers to surf, I can have periodic moments when I cannot surf the internet, such as IE9 which says that I cannot connect to the internet due to some unknown error. But when I run diagnostics, it says that I do not have any errors. My adapter for my wired is the Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20). I have already contacted my ISP provider who have worked for with all the troubleshooting methods they can over the phone, and I trust that they are doing their best. But now it seems to me that the problem lies in my computer hardware or software and not in my router.
I have the CISCO Linksys Wireless Router Model Number: WRT120N. My laptop is finding the router, and connecting to it fine. However, when I try to log onto the internet, it says no internet connection (same in the available net work section in the menu bar).Internet (Charter) they have checked the modem and there is no issue. I have also plugged the Ethernet cord directly from the modem into the computer, and unable to access the internet.
I'm capped out at 12 mbps service through Mediacom. My PC is directly wired to the WRT120N. I consistently test in the 11 mbps range.
I have a very unusual issue though.
I can connect my iphone and Xbox wirelessly through my router with no issues on their side. However, any time I do so, it kills my wired connection on my PC. I'm not doing huge downloads or P2P or anything like that. In fact, the speed drops immediately on my PC the moment I connect my phone to the wireless network regardless of what i'm doing on the phone (checking email or loading a webpage).
I have a Linksys WRT120N with two desktops connected via wired connections.In the house, there are two students accessing the Internet through WiFi via the WRT120N.One of the laptops (on an Apple laptop) seems to lose its' connection from time to time.The other laptop (Lenovo) is located the furthest distance from the router and only gets two bars signal strength.Would my best option to improve the signal strength for the Lenovo laptop and hopefully, also increase reliability for the Apple laptop be to purchase a new router such as a Linksys E1500 with speed boost or would it be best to try a Linksys range extender (RE1000)?
I don'y know why connecting to a router is always so difficult.. Anyway, my win 7 laptop is connecting to the router and I set it up (Reset everything a few times). I also have no connection through Ethernet connection with the router.What do I do? The modem is Cisco DPQ3212 and the router Keebox-w150nr wireless 150 N router.
I am trying to extend my home network into my basement with both wired and wireless connections. I have a WRT120N upstairs, which is connected to my cable modem. I have an E1200 in the basement, which I have connected with a LAN port. DHCP is turned off, and all wired connections are getting an address from the upstairs router, and connecting to the internet successfully.I've configured the wireless with the same SSID on both routers, but the clients that connect to the downstairs wireless are not able to access the internet. They are getting an IP address from the upstairs router, but can't get past the gateway.
have listed all ports udp and tcp i have disabled UPnP i have changed mtu to 1364 and tried 1365. i have rebooted both router and modem. still no success. Cant seem to change nat type 3 to nat type 2. i am use a WRT120n wireless router
I have VPN Router (3845) in Head Office and VPN Router (1921) at Branch Office. I have also internet router (1921) which passes through ASA 5520 to internal Network at Head Office. I can give internet connectivity to Head Office Users by giving access in ASA 5520 with following lines: nat (inside) 1 192.168.2.13 255.255.255.255.
I have added line for internet access for Branch Users in following manner in ASA 5520: nat (inside) 1 184.108.40.206 255.255.255.255. My Head Office user can access internet but my branch office user cant access internet. how can i give internet access to my branch office users?
I can't access the web based setup via 192.168.1.1. I've had this problem since I swapped to Static Ip from PPPoE. I changed internet provider and now when it type 192.168.1.1 in the browser it says Internet explorer can't show the web page. I've tried Crome and FireFox but with the same result. I followed the instructions in [URL] but to no result.
My Wireless-N Home Router WRT120N with version 1.0.07 seems to have a problem blocking Sites through scheduling with Access Restriction "Allow" ...I notice that... when I enable access restriction, with policy and some range of computers connecting to my router , and set it to "allow" from "monday - friday" from "8am-6pm" .. with a purpose of blocking some social networking sites, example facebook, It works perfectly fine. But when the "scheduled" time comes ( before 8am and after 6pm ).. I cannot access the internet.. router is working, it detects my modem.. but no internet connection. It always happen before and after the "scheduled time" before the configured access restriction takes over. I have to disable the Access Restriction to continue our internet access.
I reset my router (WRT120N) and used a laptop with cable connection to reconfigure the router. With the laptop I can acces the router admin wireless, but with my home pc I am not able to acces the router! I get "The username or password you've entered is incorrect. Please check and try again." Like I said, wireless acces with laptop is no problem.Is this a security issue that allows only acces with computer that you configured the router?
I decided to limit some Internet time for the kids going off this router (which has been working great since set up) but my Access Restrictions tab is missing. I have an identical router at my work place, same version/firmware, same settings, but the one at work does have the tab.
I have been using Mozilla Firefox for about 5 or 6 years now, and I have always been able to access any router setup through Firefox. Now though, I strangely can't. I try to log in from Firefox and I get stuck at the log in dialog box even if I use the correct password. If I cancel, the router assumes that I do not know the password and I get the standard Linksys access denied page. I then start using IE[current version], and I can log in absolutely fine. I can still use Firefox to browse the internet. I can ping the router. I can use Firefox to access the router setup from a different machine.
WRT120N router: After several hours on the phone with Technical support I got nowhere. Guy had me putting in "admin" in the user name then the PW. I kept getting the 401 authorization required message. After all that I reset my router and used the disk to setup again. After that I went again to the 192.168.1.1 and got the request for authorization, entered admin in the PW and it does nothing, just reloads the request and browser keeps connecting. I have WIN 7 HP, use Firefox 5.0 mostly, but tried on IE8 as well and it does the same thing. I am attempting to open a port.
i have router lynksys WRT120N and the latest 220.127.116.11 firmware. And the problem occured frequently. At about 13.00 i went out, wifi was working okay. At around 18.00 i returned home and i was trying to connect to the wifi with my android phone, and suprisingly it did not work. I tried on my laptop and on a android tablet. It did not work. The only thing that i could figure it out is to reset the router. I checked the settings, and there was no access policy e.g. time based access blocking.
WRT120N router: After several hours on the phone with Technical support I got nowhere. Guy had me putting in "admin" in the user name then the PW. I kept getting the 401 authorization required message. I reset my router and used the disk to setup again. After that I went again to the 192.168.1.1 and got the request for authorization, entered admin in the PW and it does nothing, just reloads the request and browser keeps connecting. I have WIN 7 HP, use Firefox 5.0 mostly, but tried on IE8 as well and it does the same thing. I am attempting to open a port. Also the support site has been down for over 13 hours for routine maintenance service.
All the documentation for this router shows the Access Restriction tab in the router configuration menu. It's the same as other linksys routers. The current version of the firmware doesn't have this functionality. Was it removed?
I have a BEFSR41 V2 router connected to a westell c90 modem and my provider is Bellsouth.net (AT&T). I have the modem set to PPPoE and DHCP enabled. I am using the router as a gateway. The router's status page indicates that is communicating with the modem. Release and renew works and I can detect the addresses of the modem. I just can't pull up websites. I am wondering if this router (12 years old) is not compatable with the service.
Have a PS3 that will connect to my wrt120n if I unplug the modem and router then plug back in after 2 minutes. if I shut off my PS3 or after approx 1 hour, PS3 drops my connection. I'm trying to access my router page online but after entering the default into my browser, the pop up box will not accept any combo of entries to allow me access. I have an SSID name and my router is password protected. It does not connect me when I use any combo of user name or password or the default "admin".
Before, I can access admin panel of router via 192.168.1.1 on any computer, be it wired or wireless.This time, I can't anymore.This time, I can only access admin panel on 1 computer only. The computer in which it's directly connected to the router, wired. All other computers, connected to a switch, which the switch is also connected to router, can no longer access admin panel.I can still open 192.168.1.1 with a username/password prompt but I can't log in. It's like it's always wrong password. Same with accessing from laptop (wireless).Before, I can access admin panel from any computer (wired), even from laptop (wireless). There are times that I have to restart router in order to fix my internet connection. Only this time, I have to access it from the computer that's directly connected to router (wired).How do I revert it back so that all computers will be able to connect to admin panel of router?I have just finished upgrading firmware from 1.0.05 to 1.0.06 but I still have the same problem.
I have NM 5.5.9195.0 and WRT120N Linksys router. I have an Ipod using WIFI to connect to the network which I would like to restrict times for. Using the access restriction page in the manage/setup of the router seems to not work well. The system does recognize the MAC address of the Ipod but setting times to allow or deny gives me odd results. The allow button actually denies use for one thing. Secondly, the deny time ends, but the Ipod still cannot connect sometimes. It is like the system gets stuck in deny. I have tested using a random 5 minute deny time period, yet the Ipod is denied all times. The system is consistent in denying the Ipod (actually using the allow button) but not on the times.
COX cable was out yesterday doing some work outside our apartment building. Now, our CISCO LinkSYS WRT120N won't work. I was working before COX cable came out and has been working without problem for the past two years.When I plug the harddrive into slot 1 in the back of the router, "4" lights up. When I plut it into slot 4, "1" lights up. When I plug it into slot 2, "3" lights up, and when I plug it into slot 3, "2" lights up.I tried the router software, but when I reach the plug the router in step, the soft ware returns after a couple minutes and says it cannot locate the router, even though the router lights are on.
For home use, I have a Windows Vista PC which is hooked up to the Internet via a wireless EV/DO modem that plugs into a USB port. I just bought an iPad and for connectivity, I then bought a WRT120N wireless router. But I cannot attach the EV/DO modem to the WRT120N since the EV/DO only has a USB port. I plugged the PC into one of the 4 ports of the WRT120N and the iPad sees the router, but what I would like is that it also sees the internet when the PC is online via the EV/DO modem. Is there a way to configure this? I realize that the PC would always have to be switched on if I want to have the iPad online, but for the time being I am ok with that.
Recently I bought a new laptop (Sony Vaio SVE1511HFXW) and I haven't been able to connect it to the internet wirelessly. I previously was working on a Sony Vaio VGN-NR series laptop that I had no problem setting up a wireless connection for. I ran my router set up disc on the new machine and basically everything got ruined. My other laptop lost it's wireless connection and connecting it with an ethernet cable didn't work either. So now both computers were not connected. Actually, all devices can't pick up the wireless anyway (I tried to get on netflix with my Wii and it didn't work) I restarted the router several times, reset it once and nothing happened. I could only connect with the cable after I reset the modem and router, but it's still saying it "can't detect an internet connection." When I ping the router I get an answer back.
Here's what I get when I run ipconfig in the command prompt:
C:UsersShinsei>ipconfig Windows IP Configuration Wireless LAN adapter Wireless Network Connection:
I have an RV042 Router and did a one-to-one NAT mapping for my server using an additional external IP I received from byt ISP, pointing to machine 192.168.2.5. I am now successfully able to access the machine via the external IP without issue, however the server is no longer able to ping any external IPs?
the machine has been assigned a static IP of 192.168.2.5 and static DNS servers.