Cisco VPN :: Giving Internet Access Through 3845 Router
Apr 25, 2013
I have VPN Router (3845) in Head Office and VPN Router (1921) at Branch Office. I have also internet router (1921) which passes through ASA 5520 to internal Network at Head Office. I can give internet connectivity to Head Office Users by giving access in ASA 5520 with following lines: nat (inside) 1 192.168.2.13 255.255.255.255.
I have added line for internet access for Branch Users in following manner in ASA 5520: nat (inside) 1 173.16.33.4 255.255.255.255. My Head Office user can access internet but my branch office user cant access internet. how can i give internet access to my branch office users?
View 1 Replies
ADVERTISEMENT
Jan 18, 2013
I don'y know why connecting to a router is always so difficult.. Anyway, my win 7 laptop is connecting to the router and I set it up (Reset everything a few times). I also have no connection through Ethernet connection with the router.What do I do? The modem is Cisco DPQ3212 and the router Keebox-w150nr wireless 150 N router.
View 3 Replies
View Related
Oct 31, 2011
I have a problem with my Router WRT120N wen I connect to router with wireless are wired it`s not giving me Internet access but the light on the router of Internet is ON if I put the internet cable directed to my computer give me internet.
View 2 Replies
View Related
Jan 14, 2012
I have recently bought a new XPS 15Z Currently when I surf the internet I am unable to use the browsers ( IE9 or firefox ). I am able to use non-broswer related internet applications like STEAM, MSN or QQ with no issues in terms of speed or stability. But when I use my browsers to surf, I can have periodic moments when I cannot surf the internet, such as IE9 which says that I cannot connect to the internet due to some unknown error. But when I run diagnostics, it says that I do not have any errors. My adapter for my wired is the Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20). I have already contacted my ISP provider who have worked for with all the troubleshooting methods they can over the phone, and I trust that they are doing their best. But now it seems to me that the problem lies in my computer hardware or software and not in my router.
View 3 Replies
View Related
Dec 6, 2011
Is there a way to get VPN IP address without giving someone access to the firewall itself? LIke a script you can put on a website?
View 2 Replies
View Related
Apr 2, 2012
I am trying to give a vendor VPN access so that they can remotely monitor and diagnose their installed heating and cooling equipment. I dont know where to start and I apologize in advance for my ignorance. I am technically savvy but i have no Cisco knowledge base.
It is a PIX 506e firewall with PIX v6.3.
View 1 Replies
View Related
Dec 29, 2011
SG300-10 mode:layer 3
dns server:192.168.2.11
vlan1 192.168.2.0 ip:192.168.2.254 0.0.0.0 next hop 192.168.2.3
vlan2 192.168.50.0 ip:192.168.50.254
dns server table:192.168.2.11 (active)
Router(192.168.2.3) dst.address 192.168.50.0/24 gw:192.168.2.254
No internet
pc:
ip:192.168.50.10 192.168.2.10
gw:192.168.50.254 192.168.2.254
dns:192.168.50.254 192.168.2.254
If dns = 192.168.2.3 >> yes internet
I think there is something wrong with the DNS setting on the SG300?Or I do something wrong?
View 2 Replies
View Related
Dec 4, 2011
The Internet on my Toshiba laptop suddenly has stopped working. If I connect the laptop directly to the router the internet works ok. Othe computers work ok using the same router.
View 1 Replies
View Related
Dec 10, 2012
Is there any physical or technical diferrences between PWR-3845 AC/2 and PWR-3845 AC? We are trying to order replacement parts and wondering if PWR-3845 AC is for one power supply and AC/2 means you get two with one order?
View 1 Replies
View Related
Oct 21, 2012
After replacing a Cisco CSS/SSL Accelorator and PIX firewall with an ACE 4710 to do load balancing and SSL encryption behind an ASA firewall we started seeing mangled HTTP requests in the Apache access logs for the servers in the server farm. This is occurring for several different URLs and not just the one above and for multiple web browsers.The ACE load balances to servers running Tomcat 7 with Apache HTTP server v. 2.2.14. A recent ACE software upgrade to A5(2.1) has not fixed the problem.
View 1 Replies
View Related
Apr 7, 2012
Buying a TP-Link W8961ND modem/router. Didn't work at all, except for a vague sense I got that the internet wasn't spending as long 'down' as previously when it did drop.And now today my housemate and I are both connected and suffering these intermittent drops, which become more and more frequent, until finally the internet cuts out and won't return. Now I cannot get the TP-Link router to connect to the internet at all. However, switching back over to the original D-Link router now the internet DOES work, but still only intermittently. As I've been writing this it's dropped out for a couple of moments twice!
View 10 Replies
View Related
Apr 22, 2013
I am currently on Time Warner Cable 10 mbps packge, and am using their wireless DOCIS3 modem/router. It is connected in my bedroom to the main computer. That computer stays connected. However, throughout the rest of the house (we have a two story townhome) it will drop completely or give limited connection...constantly. Sometimes I can have my laptop next to me and it will go out or give limited connection. The connection speed never drops, it just goes completely to no connection. Not for sure what is going on, if its on my end or time warner. Has been doing this for quite some time, the cable company comes out and changes the modem, but that's it, couple days later, goes back to doing it again.
View 8 Replies
View Related
Dec 7, 2012
Is there any physical or technical diferrences between PWR-3845 AC/2 and PWR-3845 AC? We are trying to order replacement parts and if PWR-3845 AC is for one power supply and AC/2 means you get two with one order.
View 1 Replies
View Related
Nov 10, 2011
I have this D-Link DIR-825 and it was working fine till yesterday. All of a sudden it stopped connecting to internet. I restarted it and tried to login to the router but failed. I called the support and did a hard reset of the router. After that when I am not able to connect to the router from my computer for configuring it again. When I connected the Router to my computer via LAN cable sometimes the LAN port is glowing and sometimes it is not. I tried different LAN Cables too. But nothing is working and I am not able to get to the router page.
View 5 Replies
View Related
Sep 4, 2012
Both of these model units apear to have a max Internet downlink speed of about 26 or 27Mbs. I have tested this with 10 different units at 3 different sites where the provided broadband downlink speed is a full 50Mbs, including in my own office. My normal router is a Cisco ASA5505 and I have also connected a Cisco 1840 router and even an old Linksys router and all achieve the full 50MBs speed using a variety of speed test sites. The cable modem at my office and at the other sites have a gigabit LAN connection and the RVS4000/WRVS4400N units certainly should be able to achieve the 50Mbs speed. If this issue can not be resolved, my clients will no doubt want me to install a different manufacturer's unit, which I will do.
View 11 Replies
View Related
Mar 30, 2011
I have the following topology::
[code]...
I can ping to both devices using Virtual ip address.The work around to solve the lines "Active router is unknown and Standby router is unknown " is to delete the hsrp configuration in Standby device, after that the problem is solved but is happens again after some days.The problem is that i don't have access to Foundry switch but i think that HSRP configuration don't have any problem, even in Log Buffer i didn't saw any problem related with HSRP.
View 4 Replies
View Related
May 5, 2011
I have a 3845 router (12.4(13r)T10) with ZBF. On my LAN there is a user who need to access a remote IPSEC VPN server. He is able to get the tunnel but afterwards he cannot connect to any service in the remote LAN. As I'm using zbf I think that I should inspect traffic from my LAN zone to EXT zone, There is a document that describe a solution to this? What IP adressess should I use?
View 2 Replies
View Related
Oct 3, 2011
I have a 3845 router (12.4(13r)T10) with ZBF. On my LAN there is a user who need to access a remote IPSEC VPN server. He is able to get the tunnel but afterwards he cannot connect to any service in the remote LAN. As I'm using zbf I think that I should inspect traffic from my LAN zone to EXT zone
View 3 Replies
View Related
Nov 3, 2012
We have a Cisco 3845 router and on the G0/0 interface we have our public switch with multiple public IP addresses (servers, routers, etc..) and on the S0/0 interface we have a DS3 Internet connection. I need to limit the bandwidth from the Internet (download) to one of the IP addresses on the G0/0 interface. I'm thinking of limiting to 256K and really need info with either a policy map or something equivalent.
View 6 Replies
View Related
May 7, 2013
I have cisco router 3845 with cisco switch. internet is not work or some time it works but very slow on LAN, i have web server on my LAN but internet users can access it very well. it seems like there is some outgoing traffic issue
interface GigabitEthernet0/0.7
encapsulation dot1Q 7
ip address 192.168.7.1 255.255.255.0
ip helper-address 192.168.10.15
[code]....
View 1 Replies
View Related
Mar 22, 2011
I am configuring remote access VPN on a cisco router 3845. Works fine.
I was looking for configuring session and idle time configuration for groups and eventually users.
I am using the following Cisco VPN remote access configuration :
crypto isakmp client configuration group mygroup
key xxx
pool mypool
acl 101
max-logins 3
banner ^CHelloo ^C
Is there any command in cisco ios similar to Cisco ASA vpn group 1 session-timeout?
View 1 Replies
View Related
Jun 21, 2011
i have a cisco router that has dhcp configured, the router ip address is 10.10.10.***. all computer that attached to the router are using static ip and works fine but when i am connecting my laptop using wireless in gets an 192.168.1.*** address.
View 17 Replies
View Related
Jan 1, 2012
i have Cisco 3845 with 1 GB SFP, my company using fiber as backbone to isp, i have new internet connection 310 Mbps, does that enough ? does that for port only for LAN or also for WAN ?
View 8 Replies
View Related
Oct 1, 2011
How Do I give the Static IP Address given to the router by the ISP to machine
View 1 Replies
View Related
Mar 9, 2012
I have just upgraded my internet connection. My ISP is now supplying 50mpbs. If I connect my laptop or pc directly into the ISP modem I get a speed of 75mpbs, very happy with that. But if I connect my Sitecom wl-340 router to the ISP modem and then my pc or laptop into the router i can only get 10mpbs! I have connected everything with cat 5 ftp cable.
View 1 Replies
View Related
Aug 22, 2012
I have ZyXEL PLA4201KIT Mini Powerline Ethernet Adapter Starter Kit Up to 500Mbps to connect my desktop to the internet and recently i've been getting random moments where i lose internet connection so everything stops working. I have to either restart my comp or take out the ethernet cord and put it back in. my router is next to our tv and i read somewhere that having it next to a big appliance will suck all the power for itself.
View 1 Replies
View Related
Feb 18, 2011
My connection is good directly to the modem. But the wireless router is giving off very slow speeds. For instance the modem is 10Mbps but I'm only getting 1.5 - 2Mbps through wireless.
View 4 Replies
View Related
Mar 4, 2011
I have a switch connected from the internet outtake in my apartment.This switch gives internet to two, or sometimes three computers, by cable.To get wireless I have a DLINK-615 connected after the switch.This solution works flawless for some time, just after the router is started or reset. If I go to speedtest.net both the upload and the download works flawless.However, after around half an hour it's virtually impossible to upload, which gives heavy lag in programs like skype and games. If you try to speedtest.net now the download is still fine, but the upload gives a result of 0.1mb/sec after trying to even start the test for 3-4 minutes.Router giving up upload completely
I've tried to change the IP in the router to prevent a conflict between it and the switch. The problem is still there whatever IP I choose though, I simply have no upload.I've also tried to disable the DHCP, mess with the MTU and to enable the Access Point mode with no result.
View 2 Replies
View Related
Nov 28, 2012
Just installed RV042 router. And it's giving out router certificate instead of server certificate so people who are trying to access our secured server are getting errors. I'm not talking about remote management. I'm talking about people trying to access our web site, which is secured, and getting an error because the RV042 is giving its own SSL certificate instead of the Server's certificate. How do we turn that off or keep it from happenning?
The RV042 firm version is v4.0.0.07-tm (Aug 19 2010 19:19:50)
View 5 Replies
View Related
Jan 5, 2013
I have 2 public ip, 1.1.1.1 anda 1.1.1.2. I'm connected to the ISP using PPPoE. I also have a router and a firewall. I want to assign 1.1.1.1 to router and 1.1.1.2 to the firewall. I do not want to NAT 2 times (one in router and one in firewall)That's why i want to bridge Fa0/0 and Fa0/1.Could this be done in Cisco router? I've done this command but it's not working as i want. I'm using bridge irb and bridge-group.
View 6 Replies
View Related
Oct 5, 2011
I was using my internet on my Acer Windows 7 operating system wireless just fine on Monday. I tried to use it on Tuesday and could not connect to the internet wireless any longer. I get an error message next to my network stating ""The settings [COLOR=green ! important][COLOR=green ! important]saved[/COLOR][/COLOR] on this computer do not match the requirements of the network"I have never encotured this kind of problem before. I proceeded to call Comcast who did all kinds of trivial beginner troubleshooting such as restart the router, restart the modem turn on and off the computer.
View 3 Replies
View Related
Oct 15, 2012
I've got a problem with DHCP running on a cisco 1900 series router, 1921 to be precise. The Data VLAN works perfectly, i configured a ip helper address and its working. Problem tough is VLAN 20. This is the voice vlan. As u can see in the config below, this has been configured using VRRP and VRF for failover purposes. I did more of these configurations, and they all worked fine, just not with this particular router!
As u will notice i deleted all the not needed to know information or i X'ed it!
Jan-Aart
version 15.1
service timestamps debug datetime msec
[Code]......
View 3 Replies
View Related
Mar 20, 2011
Recently i have been having LOADS of problems with my wireless router. Every now and then it will decide that 2 of my 3 computers will not be allowed to connect to the internet. and i will have to spend hours of resetting and rebooting computers to get it to work again.. only for the issue to start again a few hours later. I recently added the third computer but im not sure how that would be an issue.
the router is a Linksys (cisco) WRT54G2.. a
View 1 Replies
View Related
