Linksys Wireless Router :: Wrt54gx - How To Change Internet Providers

Apr 5, 2012

have a wrt54gx and changed internet provider from cable to dsl. Can you let me know how to do this? I have a printer routed through the router.

View 1 Replies


Linksys Wireless Router :: WRT54GX V2 No Internet Through Wireless

Jul 7, 2011

Yesterday a second hand WRT54GX v2 arrived. I updated the firmware to the latest version and updated the settings.My problem is that I can't connect to the internet using wireless. Somethimes he connect for a moment. The only thing i can do is entering the webpage of the router. Windows 7 says that there is a problem with DNS.  Every thing works fine for wired.

View 2 Replies View Related

Linksys Wireless Router :: How To Flash WRT54GX Version 2.0

Sep 5, 2009

My WRT54GX version 2.0 router is bricked during the firmware upgrade and the file was (WRT54GX_V2_EU_2.00.20.bix) from the linksys support main site. The power LED is blinking and the DMZ LED is off. I can not access to WEB GUI anymore and after many times reseting also pinging the router IP there is no respond from the router. No respond with tftp too. How to flash this router by JTAG or.

View 5 Replies View Related

Linksys Wireless Router :: Is It Possible To Extend Range Of WRT54GX V

Aug 6, 2012

I am trying to use the Netgear WNR 2000 V3's repeater function to wirelessly extend the range of a Linksys WRT54GX V.2. I have the SSID's and channels the same. I had the Netgear working great as an extender with my Apple Airport Extreme base station (equipped with WDS). As far as I know, the Linksys is not equipped with WDS.

View 4 Replies View Related

Linksys Wireless Router :: WRT54gx / How To Access Corporate VPN

Aug 7, 2011

Trying to access my corporate VPN.  My laptop can successfully VPN in anytime I'm on the road, but not through my WRT54gx at home.  I've enabled the VPN pass through but my expertise ends there. 

View 1 Replies View Related

Linksys Wireless Router :: Wrt54gx Version 2 Has Better Connectivity

Oct 21, 2012

The router in on the 2nd floor and I am sitting on 1st floor and the signal fluctates on my laptop and blackberry.  keeps going between 3 and 4 bars.. my old linksysm wrt54gx with SRX alway delivered a steady 4 bars. Read what others are saying and believe it.I even tried just using 2.4, split between 2.4 and 5.  no better in any combination.I have to admit I do like the configuration screen.

View 3 Replies View Related

Linksys Wireless Router :: Losing Connection On WRT54GX Version 2

Oct 3, 2011

So i have this old WRT54GX v2. It have been running fine for the last ~5years. But since this morning i'm losing my wired connection after about 10 sec og connectivity, can't even ping it when it drops. If i turn it off for 10 sec the same problem occurs. Tried both static ip and dhcp. Wireless doesn't work either.

View 5 Replies View Related

Linksys Wireless Router :: Firmware Update Needed For WRT54GX V1?

Oct 26, 2011

I have been having numerous issues with my router dropping both my wired and wireless connection multiple times an hour.  I checked the Cisco website for the firmware update and it says the download is no longer available.  I am on firmware 1.02.06.  Does someone have a newer version?  I'm hoping a firmware update will resolve this issue.

View 1 Replies View Related

Linksys Wireless Router :: Any Free DDNS Providers That Can Be Used With EA6500

Dec 20, 2012

Is there any free DDNS providers that can be used with a EA6500 ?

View 3 Replies View Related

Linksys Wired Router :: RT341P2 Can't Use Voip Providers

Mar 10, 2012

I buy new Linksys RT341P2 router with Linksys - Firmware Version: 1.30.01. My voice ports are locked, and i can`t use voip providers. How to unlock and what i need to do?

View 1 Replies View Related

Linksys Wired Router :: RV082 Load Balancer Between 2 Providers

Feb 25, 2011

I have got Linksys RV082 in my home network to use it as load balancer between 2 providers.Is it possible to make some customisation in scenarioses and logging system? As I understand the device is based on some Linux core and Linux infracrtucture. So it must me available in sources... How I may get this kind of access? I want to get ssh/telnet or other raw access to installed on the device OS and manual control it, treat around web-UI. How may I do it?

View 1 Replies View Related

Linksys Wireless Router :: EA4500 Change Looses Internet Connectivity?

Nov 19, 2012

I have an EA4500 router.  It's the latest in a long line of Linksys routers I've owned and I'm pretty familiar with setting one up and making changes. But the EA4500 seems a bit more picky than previous routers.  Last night I tried to enable port forwarding for ports 53, 80, and 88 for my xbox.  I already had port 3074 forwarded.  When I did that and applied the change, I lost all Internet connectivity.  I tried cycling the power on the router with no luck. I finally got connected again by going to and disabled those ports. The status page then said I had Internet connectivity but I really didn't at least right away. It took a couple minutes before I was actually able to to connect to the Internet again.  What else should I check when it says I don't have internet connectivity?

View 3 Replies View Related

Linksys Wireless Router :: WRT54GL - No Internet Connection After Change Settings

Nov 24, 2011

I've had my WRT54GL for a few months now and have two computers that are wired and 3 that are wireless. I started having problems with conflicting IP's a couple days ago on one of my wired computers which was set for auto DHCP so I changed the settings and made it a static IP, this is when the problem started. I have Network Magic on all computers and even though it says I'm connected to the internet and the network, I am not able to get online. My other wired computer has been on Static IP for months and works fine.

View 9 Replies View Related

Linksys Wireless Router :: WRT160N - Lost Internet Connection When Change SSID

Jul 8, 2011

i bought a WRT160N router
I connected the Router to the modem, and all the wired connected PCs were working perfectly.But then, i went to the setup page to configure the Wireless settings, and as soon I changed the SSID name, the connection internet connection droppedThe only way i had to fix this was by making a Hard Reset.after that, I also tryed changing values and settings from all the configuration tabs, and the wired connection was working properly, but as soon i changed any value from the Wireless tab, the internet connection dropped (even, in the diagnostics section, i could not do a ping to google. It says unknown host).

View 3 Replies View Related

Broadband :: Can Have 2 Internet Service Providers

Jun 16, 2011

Can I have 2 Internet providers?I've been with Orange broadband for a few months and it's been unusably slow, so we're cancelling the contract and changing to Sky. Orange are making us trouble-shoot before this can happen, so the preference would be to install Sky, leave the Orange router unplugged and ignore it until the contract ends. Is this realistic? I know both couldn't use the line at the same time, but could we just unplug our Orange router or would it create slow down or not work at all?

View 2 Replies View Related

WRT54GX - Internet Randomly Dropping Connection?

Sep 13, 2011

I have the unfortunate experience of persistent connection issues with my Comcast cable internet. Periodically (sometimes several times in an hour) my connection dies, and then resumes within a minute or two. It is not a long downtime but it is long enough to disrupt whatever I happen to be doing on the internet (Skype, messaging, online gaming, uploading, downloading, etc.) which can be very irritating. I know enough about computers that I've built several of my own machines, but I am no expert in networking by a long shot...

Here are my internet specs: Comcast broadband with RCA DHG535-2 cable modem plugged into a wireless Linksys router model WRT54GX.

I know the connection issues don't lie with my wireless card because I have two computers and they both drop at the same time. The issue HAS to be either the router or modem (or Comcast), but from all the other posts I've read of similar issues, I suspect it might be the modem.

View 13 Replies View Related

To Connect Linksys WRT54GX V2 To Netgear N300 WNR 2000 V3 Wire

Jul 15, 2012

Someone I know has a Linksys WRT54GX V.2 (no WDS capability at all to my knowledge) and a Netgear N300 WNR 2000 V3 (with the repeater option). He wants to connect one to the internet in a home. The other would go out to his shop and he would like to get the internet out there too. He would also like to access the internet wirelessly with a laptop at either end. He has a wireless laptop setup and it works. The shop is line of sight with the home with no obstacles. A wire will not be able to connect one wireless router with the other due to terrain features. His laptop can get the internet from the Linksys (the Linksys is set up in the home) while he is in part of the shop, and he is trying to increase the range so that he can move to another part of the shop.

View 1 Replies View Related

Cisco Switching/Routing :: Default Gateway Of VOICE Providers 2600 Router

May 21, 2012

We have two MPLS circuits managed by two different suppliers, one carries VOICE the other DATAWe are to decommision the VOICE MPLS and have increased the bandwith of the DATA MPLS to carry VoIP traffic too. 

At both of our sites A & B ,devices connected to the LAN have a default gateway of the VOICE providers Cisco 2600 router , which then goes into the LAN switching. (see diagram)So what I am trying to achieve is toto simply replace these 2600 routers from the VOICE MPLS provider with our own so we dont have to change the default gateways at both sites. 
Our Cisco 2600 routes are plugged into each LAN switching environment with two subinterfaces configured, one for voip and the other for dataThe problem is from the router and respective subinterfaces we can get to the other sites destination without any issue, but if for example a user is at site A with Ip address they cant ping the VOIP subnet at site B But If a ping is issue from the Site A test router then the subnet is reachable but only on the configured subinterface.So i guess what Im saying is from the LAN needs to be able to get to at site A & can communicate no problem and at site B & can communicate no problem.We are using IP routing, should we be using route-maps? 

View 15 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961NB / How To Add Other DDNS Providers

Jan 12, 2013

Region : Germany
Model : TD-W8961NB
Hardware Version : V1
Firmware Version : 1.0.0 Build 110707 Rel.32779

would it be possible to add other DDNS providers to the router menu?E.g. I use as DDNS service (pretty much the same syntax/protocol as DynDNS, but free and more flexible).

View 2 Replies View Related

Linksys Wireless Router :: How To Change Password For WRT54G

Apr 9, 2008

I want to know how to change the Router Password. I have two computers running XP connected to my WRT54G; one via cable and the other wirelessly. I'm using WEP security. The router setup defaulted to "admin" for the Router Password; I'd like to make it a stronger password.

View 9 Replies View Related

Linksys Wireless Router :: How To Change Passphrase On WRT160N V3

Sep 17, 2012

A few months ago, I purchase, installed and configured a WRT 160N V3. And I couldn't be happier. I now would like to go back and change the passphrase that a user needs to enter when they connecting to my router. Currently it uses the default value. And I would like to make it a bit more friendly. I found a number of postings dealing with setting retrieving or changing the Admin password.
But I was not able to find anything on changing the “passphrase”. There probably are a number of postings on the subject, and I simply overlooked them. 

View 5 Replies View Related

Linksys Wireless Router :: How To Change SSID On X2000

Dec 31, 2011

I cannot find the screen in the interface at 192. Where is this?  Please don't say use Cisco Connect disc.

View 1 Replies View Related

Linksys Wireless Router :: How To Change TCP Timeout On WRT54GS

Jun 8, 2011

How do I change the tcp timeout on a WRT54GS router v2 ?

View 4 Replies View Related

Linksys Wireless Router :: WRT160N V3 - Way To Change IP Address

Feb 14, 2012

How do I change the IP address on the router?

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - How To Change External IP

Mar 16, 2008

How do I change my wireless router's (WRT54G) external IP address? I'm having IP conflicts with Yahoo and whenever I check the router's IP, it's always the same, despite the fact that my cable Internet provider uses DHCP to hand out IPs.

View 4 Replies View Related

Linksys Wireless Router :: Change Channels On WRT160n V3?

Jan 22, 2011

Change the channel on my router WRT160n?

View 2 Replies View Related

Linksys Wireless Router :: Change Nat Type To Open For Ps3?

Jan 28, 2012

changing my nat type to open i have tryed so many solutions and none of them worked?

View 9 Replies View Related

Linksys Wireless Router :: Change Old By Model E2500

Jan 4, 2013

I want to change my old router (wrt160N v3), by this model Linksys E2500.The question is, there will be a lot of changes improvements if i do this upgrade?

View 2 Replies View Related

Linksys Wireless Router :: E3000 NAT Type Change For PS3?

Sep 29, 2011

I dont know or understand how to change my nat type. I have the e3000 linksys router. My ps3 is running wireless off it. I want to change form nat 3 to 2

View 1 Replies View Related

Linksys Wireless Router :: Can't Change WRT54GS V7 To Static IP

Jan 4, 2011

I have a couple of Linksys WRT54GS V7 routers, they work fine, with the exception that when I login to the web interface, I select the drop down box for DHCP to change it to a static IP, the page refreshes, but comes right back to the same screen with DHCP selected again, I can change the time zone with no issues, I entered the Static DNS info. I've tried a couple of different PC's with a couple of different IE versions. I already updated to the newest firmware, firmware is 7.50.8, I've also factory reset it a couple of times, and I've just run into a brick wall.  I've setup hundreds of these routers before so it's not like I don't know how.

View 3 Replies View Related

Linksys Wireless Router :: Change NAT Type To Open For WRT150N?

Jan 6, 2012

Changing the NAT Type to open because I can't play with some of my friends on Playstation.

View 1 Replies View Related

Linksys Wireless Router :: Change Media Server Name (E4200v2)

Mar 25, 2013

Is it possible to change the DLNA Server's name? Cisco49129 just doesn't have a nice ring to it.

View 1 Replies View Related

Linksys Wireless Router :: Change NAT Type To Open On E2000?

Jul 15, 2010

how to change my nat from moderate to open so i can play xbox without any problems. But the weird thing is my nat used to be open but it changed to moderate and i have recently bought the linksys e2000 and it was open at first but not anymore.

View 9 Replies View Related

Copyrights 2005-15, All rights reserved