Linksys Wireless Router :: How To Change SSID On X2000

Dec 31, 2011

I cannot find the screen in the interface at 192. Where is this?  Please don't say use Cisco Connect disc.

View 1 Replies


ADVERTISEMENT

Linksys Cable / DSL :: X2000 Does Recognize SSID But Will Not Connect

Feb 25, 2012

I am having a LOT of trouble with an HP 6500A Plus wireless printer.It has been working wirelessly with my X2000 using WPA2 Personal encryption. (The WPA2 key has NOT been changed since it was working)It has recently stopped working and I cannot see why.All other devices (Wii, two iPads, 1 iPhone) all continue to work faultlesly.I have tried numerous times to reset the WPA2 security key on the HP Printer but each time it fails to connect to the X2000.It does recognize the SSID. But will not connect.I tried to turn on the LOG in the X2000 to see what information I could gather, but nothing get put into the Security Log. Maybe I am setting it up wrong, using "wireless" then "Log", then "enabled", then "view log", select "Security Log". attempt to connect from the HP Printer... twice, then refresh the log on the X2000, and NOTHING.

View 4 Replies View Related

Linksys Wireless Router :: EA3500 - Change SSID In Admin Area?

Jun 9, 2012

I have logged into the admin area 192.168.... And I do not see where to change the SSID.

View 2 Replies View Related

Linksys Wireless Router :: WRT160N Can't Be Accessed By Other Computers Unless Change SSID Name

Oct 15, 2011

Been using the WRT160N for a while now and it works great except for one issue. Every few weeks the wireless can't be accessed by the other computers unless I change the SSID name. It was frustrating to figure out, but simply changing the name makes it accessible again.

View 1 Replies View Related

Linksys Wireless Router :: E2500 - Change Private Network Name As Well As SSID?

May 26, 2012

Is it possible to change one's private network name as well as SSID?

View 1 Replies View Related

Linksys Wireless Router :: WRT160N - Lost Internet Connection When Change SSID

Jul 8, 2011

i bought a WRT160N router
 
I connected the Router to the modem, and all the wired connected PCs were working perfectly.But then, i went to the setup page to configure the Wireless settings, and as soon I changed the SSID name, the connection internet connection droppedThe only way i had to fix this was by making a Hard Reset.after that, I also tryed changing values and settings from all the configuration tabs, and the wired connection was working properly, but as soon i changed any value from the Wireless tab, the internet connection dropped (even, in the diagnostics section, i could not do a ping to google. It says unknown host).

View 3 Replies View Related

Linksys Wireless Router :: Cisco E3000 / Change Guest Network Broadcast Ssid

Sep 7, 2011

i have a e3000 set up with my network i have guest network set up through the cisco connect but dont see a field to change the guest network broadcast ssid so an ideas?

View 1 Replies View Related

Linksys Cable / DSL :: How To Change The Frequency On X2000

Apr 12, 2012

 How to change the frequency on X2000

View 1 Replies View Related

Linksys Cable / DSL :: X2000 Modem Speed Doesn't Change

Oct 23, 2012

My X2000 modem connect only with small speeds Kbps, it's very weak than Linksys WAG54GP2 MBPS. If I put laptop near the modem speed doesn't change.Only change occurs when I change the channel. But it speed down after a while.I set, N connection, security is WPA-personal, tried some different channel, connection 20-40mhz, update the firmware (there is no problem with laptop, with another modem I can connect with 150kb/s speed) And, if I choose auto setup, security change to WPA, If I'm not wrong.

View 3 Replies View Related

Linksys Wireless Router :: X2000 Upnp Not Available

Nov 26, 2011

I just set up the x2000 at my home Everything seems to be working fine. However, when trying to connect my play station 3. I get upnp not available when I run the internet connection test. With that, i am not able to connect to Modern Warfare 3 online. Haven't tried other games yet but i sign in to the play station network without any problems. 
 
I have Upnp enabled on my router. I have tried port range forwarding and DMZ settings to my ps3. and still not working.

View 6 Replies View Related

Linksys Wireless Router :: X2000 - Use It As Access Point?

Jan 16, 2012

i am thinking of buying Linksys x2000 , WAG160N or any other you suggest to use as a wireless access point. Is it possible?My setup is : I get my internet from my neighbor by ethernet cable from his router. My house is two-storied and ethernet cable comes to top left corner of first floor and the devices(two notebook) are on the bottom right corner at the second floor , insulation greatly reduces the signal strength.

View 5 Replies View Related

Linksys Wireless Router :: X2000 Still Working But Only Red Power Light On

Jun 19, 2012

My Linksys X2000 still working but only red power light on (at nomal there are 3 white light on).

View 3 Replies View Related

Linksys Wireless Router :: X2000 Not Downloading Applications With Android Phone

Jan 14, 2013

I did an upgrade to my firmware on the x2000 dsl router and now i cannot download apps with my android phone, i have tried everything that i can think of.

View 7 Replies View Related

Linksys Wireless Router :: X2000 Doesn't Need A User Name / Only A Password Required

Nov 27, 2011

Just set-up a new X2000, loaded latest firmware 2.0.01, configured it via the web UI ('Browser based utility' as per the manual). Connected OK to my ADSL broadband by O2.  Configured wireless, everything OK. Funny it doesn't need a user name, only a password, my prevoius WAG160N could be configured for both.Now I want to configure the Parental Controls, BUT apart from my computer name and an Android phone name, all I see in the Target Device ADD button pop-up  are a list of repeated 'Network Device'.   There seems no way to be able to distinguish which is which device (mix of XP & Win 7 PC's and HP Printer through a separate switch), as it does not show IP address or MAC. 

I thought I may have better luck with the Cisco Connect software (which I didn't use to set-up the router).  I downloaded the latest version 1.4.11194.0, and ran this on another computer with wireless.   Apart from reconfiguring my static IP address to DHCP, and then connecting through DHCP, the software said it could not configure my router. So it never gets to a point where it installs any program on the computer so that I can configure Parental Controls. How do I get the router to show ALL the computer names in the list rather than 'Network Device' or is there a way to distinguish which 'Network Device' is which computer?  

View 2 Replies View Related

Cisco Wireless :: WLC 5508 Cannot Change SSID

Dec 6, 2012

I have an issue where I cannot get clients to change SSID.  I have two SSID, one WPA2 secure, one open guest.  The secure is locally switched via Flexconnect and the guest is centrally switched.  Both of them work.  I have been able to test this and both work as intended.  The problem is that once you connect to one of them, either secure or guest, you cannot then change to the other.  The only way to change is to delete the dhcp entry from the scope and then do it. 
 
Fast SSID change is enabled.  I also have debug client output from when the client fails when you try to switch which I will include below.  I also pulled some wireshark captures and those show me that the DHCP ack packets are trying to give the client the ip address from the incorrect/previous scope.  So basically it's like FAST SSID change is not working and the client is never being disassociated properly??
 
I am totally stumped and even though the client will most likely not be switched between SSID that often I would still like to know the solution.
 
Cisco 5508 running 7.2.110.0
Cisco 3502 LWAPP
windows server 2008 dhcp server

[Code].....

View 5 Replies View Related

Linksys Wireless Router :: Slow Wireless Speed On X2000

Nov 10, 2012

I have a linksys x2000 modem router.According to this page it have wireless N and 300Mbps url...i check al off options but..and i'm not satisfied it's antenna coverage (same as cheap modem! )

View 6 Replies View Related

Cisco Wireless :: Change SSID Name On Aironet 1200 Currently Used By Network

Jan 25, 2012

I'd like to change the SSID name on Aironet 1200 which is currenty used by my wireless network.

View 3 Replies View Related

Change SSID Password On Dell Wireless 1395 WLAN Mini Card

Jun 11, 2012

I had to default my wireless router " Netgear WGR14V6" and since then I haven't been able to connect with my wireless card. I can physically connect to it with a cable but I can't access it with the wireless card. When I look at the properties it says that it is working fine but I can't seem to find where to change the "SSID and the security phrase". Usually when it is up and running it has a status button and when you click on it there is a tab that you click on and it shows you the SSID and the rest, but now since it is not connected there isn't anything that I can find to change this.

View 1 Replies View Related

Linksys Cable / DSL :: X2000 Router / Modem Only Gives Local Access?

Jun 4, 2012

I've never setup a router before, but when I tried to setup this one it required me to put in the isp ip, subnet, gateway, and dns. I assumed that this was not my ip but the ip of zoomtown which when i looked at the old routers info i figured this was the ip under the configurations summary that said wan ip, perhpaps i was wrong, i'm not sure but this ip info is static it does not change , but I believe the individual computers ip addresses use dhcp and are not static.

View 3 Replies View Related

How To Change SSID

Dec 11, 2012

How do I change the ssid network name on my dell laptop E6500 laptop?

View 1 Replies View Related

Linksys Cable / Dsl :: Use Unicode Symbols On X2000 Wifi / Adsl Router?

Apr 27, 2013

Is it possible somehow to use Unicode symbols on X2000 wi-fi+adsl router?

View 2 Replies View Related

Cisco Routers :: Linksys X2000 ADSL2+ Modem Router And IPTV

Jan 7, 2012

I would like to know if the Linksys X2000 ADSL2+ modem router will work with my IPTV service.

View 3 Replies View Related

Can't Get To The Properties To Change The SSID

Feb 6, 2012

As far as im aware the current set up of the network is two desktops connected to a router and the router is connected to a switch (i didnt assemble the network) Now what im trying to do is get onto the router so i can change the SSID for a wirless connection.i was told by the ISP i was to change my IP, DG and subnet from DHCP to a static setup they gave me, which i did. but when i go into the browser to access the net (and ultimatly put the IP into the adress bar to access the properties) the net connection fails and i cant get on. when i change back to DHCP the net works again but i cant configure the router with this IP because the company has forgoten the admin/password.

View 2 Replies View Related

Change Of SSID On An Enterprise Network?

Aug 26, 2011

I want to change the SSID on all my APs without it affecting the connected devicesThe users should possible not be affected with the connecttion to the wifi networkHow can I go about it?

View 3 Replies View Related

Motorola SBG6580 / How To Change The SSID

Mar 12, 2012

Motorola SBG6580, How do I change the SSID?

View 1 Replies View Related

Linksys Wireless Router :: 2 E3200 With The Same SSID?

Apr 19, 2012

House has 2 floors. I want to install 2 E3200, one on each floor, but both with the same SSID/Password, etc. so internet connection/streaming throughout the floor is seamless.
 
Both floors have network wall sockets ready and they all lead to the same modem/router so all devices plugged lead to the same network.
 
PS. both E3200 have been update to Firmware Version: 1.0.03 

View 9 Replies View Related

Linksys Wireless Router :: Keep Old SSID On E4200v2?

Dec 23, 2011

I will soon upgrade my wireless network from a WRT610N to an E4200v2. At setup of the router, I assume I'll be able to change the SSID of the E4200v2 and I plan to keep the same SSID as on my old router. With the same SSID as currently seen by the devices on my network

View 4 Replies View Related

Get Into Westell 7500 Menu To Change Ssid?

Jun 7, 2011

How do I get into the westell 7500 menu to changed the ssid

View 5 Replies View Related

Cisco Wireless :: Linksys X2000 - Internet Connectivity Goes Down Many Times

May 26, 2012

I have a Linksys X2000 modem. Why does my internet go down several times a day? My provider is Century Link and I have already called them. They say all is well on their end, so it must be my modem. I reset and sometimes it pops right back and other times it takes an hour or more.

View 2 Replies View Related

Linksys Wireless Router :: Second SSID Not Broadcasting On E3200

Apr 18, 2012

SSID is not being broadcast from an e3200.  I split the wireless networks and assigned a new name for the 5Ghz band.  The broadcast SSID button is enabled for both networks. (2.4 & 5). The idea is I want to stream video on the 5Ghz band.  Nothing seems to see it though, TV other PCs, etc.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Changes SSID And Password On Its Own

Dec 18, 2011

I just purchased an E4200 and got it up & running.  Everything was fine, until I connected a Wi-Fi DVD player to it.  I followed the DVD player procedure, which was to push the WPS button on the router, and then the appropriate button on the DVD player.  After a few seconds, the player connected, and I successfully accessed YouTube through it.
 
So far, so good -- except that it turns out that the router, on its own, changed the SSID and password.  When I could not get Wi-Fi access on my iPhone, I checked the Wi-Fi settings, and instead of the original SSID of the E4200 -- let's say ShadeTree -- it was changed to Cisco_WPS_xxxxx (the X's represent numbers).  I started Cisco Connect, and a screen came up showing that the password had been changed from the original, and listed both the original and new passwords.
 
What is going on?  Why would the E4200 change the SSID and password all by itself, when I connected a Wi-Fi equipped DVD player with WPS?  Is this going to happen when I connect a Wi-Fi equipped TV set, or some other component?  What can I do to keep the E4200 from changing the network name and password all by itself?  Or am I going to have to re-program every other Wi-Fi device (iPad, iPhone, etc.) every time I add a new component?

View 6 Replies View Related

Linksys Wireless Router :: WRT54G V8 - Router Won't Work After Changing SSID

Dec 1, 2011

I just reset my router to the factory settings in order to make some changes to it. However, when I tried to change the SSID to a unique name, I was unable to connect my computer to the wireless network. I then reset my security settings and left the SSID to the default name "linksys_SES_54125" and it is working just fine. I tried to connect with two separate computers both running Windows 7. My router is the WRT54G v8
 
why I wouldn't be able to connect to my wireless network when I change the SSID?

View 5 Replies View Related

HP G70-250US Notebook - How To Change Network Name (SSID) And Password

Mar 30, 2011

I have an established wireless network, using a wired Dell desktop (XP), wireless HP G70-250US notebook (Vista), wireless HP Officejet 650 E709n printer, and Belkin N600 router. To make a long story shorter, both my cable company and Belkin were involved to set up the router a few months ago, and I was assigned an SSID and password that I now want to change. I've received emails from Belkin on changing it at the router - but when it comes to my notebook computer, how to establish a network - I'd like to know how to change the SSID and password in an already-established network, once I've made changes with the router. I'm assuming this is possible? It is my understanding that I don't need to make any changes with my wired desktop, other than to use it when making the router changes? I'm a little familiar with the network configuration setting process with my printer, so am pretty sure I can handle that.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved