HP G70-250US Notebook - How To Change Network Name (SSID) And Password
Mar 30, 2011
I have an established wireless network, using a wired Dell desktop (XP), wireless HP G70-250US notebook (Vista), wireless HP Officejet 650 E709n printer, and Belkin N600 router. To make a long story shorter, both my cable company and Belkin were involved to set up the router a few months ago, and I was assigned an SSID and password that I now want to change. I've received emails from Belkin on changing it at the router - but when it comes to my notebook computer, how to establish a network - I'd like to know how to change the SSID and password in an already-established network, once I've made changes with the router. I'm assuming this is possible? It is my understanding that I don't need to make any changes with my wired desktop, other than to use it when making the router changes? I'm a little familiar with the network configuration setting process with my printer, so am pretty sure I can handle that.
View 7 Replies
ADVERTISEMENT
Jun 11, 2012
I had to default my wireless router " Netgear WGR14V6" and since then I haven't been able to connect with my wireless card. I can physically connect to it with a cable but I can't access it with the wireless card. When I look at the properties it says that it is working fine but I can't seem to find where to change the "SSID and the security phrase". Usually when it is up and running it has a status button and when you click on it there is a tab that you click on and it shows you the SSID and the rest, but now since it is not connected there isn't anything that I can find to change this.
View 1 Replies
View Related
Aug 26, 2011
I want to change the SSID on all my APs without it affecting the connected devicesThe users should possible not be affected with the connecttion to the wifi networkHow can I go about it?
View 3 Replies
View Related
Jan 25, 2012
I'd like to change the SSID name on Aironet 1200 which is currenty used by my wireless network.
View 3 Replies
View Related
May 26, 2012
Is it possible to change one's private network name as well as SSID?
View 1 Replies
View Related
Sep 7, 2011
i have a e3000 set up with my network i have guest network set up through the cisco connect but dont see a field to change the guest network broadcast ssid so an ideas?
View 1 Replies
View Related
Aug 28, 2011
Want to change network name and password
View 9 Replies
View Related
Jul 25, 2011
how do you change the Name and password of your wireless network? i accidently changed the house we are renting for the week and they wouldn't be happy.
View 1 Replies
View Related
Feb 11, 2013
How to change password for wireless network
View 1 Replies
View Related
May 12, 2012
Simply put, a wireless network was set up with a network name and password in a senior community of primarily beginner users. Recently the name and password became changed to that of a community member named, let's say, "Joe". After addressing the router several times to change things back - only to find that the network name reverted to Joe - I changed the router password from admin to a unique pw and I confirmed that Remote Management was off. Next day... it was Joe again
View 3 Replies
View Related
Nov 1, 2012
In short, I had the following problem in the past but it solved itself when people physically left the area. Now they are back, the problem is occurring and this time I have as many router settings as I can find to maybe aid in the solution.This is the problem:We have a wireless network where the physical equipment is not available to users and yet, the local network name and password continues to be changed wirelessly FROM say, "ABC network" with network password "ABC secret password" to "Jimmy's Network" and network password "some new string of letters and numbers". (we know who Jimmy is but will not approach him until we learn if this situation is inadvertent on his part or more purposeful, which we doubt as of now)Cisco Lynksys Wireless-N Home Router WRT120N[CODE]
View 1 Replies
View Related
Dec 29, 2011
Had to reset out DIR-655 router. This ended up changing our network password. Unfortunately, my DAP-1522 was not informed of this change and it will not connect to my Directv receiver now. I attempted to log into the bridge to change the password and it will not let me in. I attempted to reset the DAP in hopes that I would just be able to start over from scratch, but no dice (Assuming that I did it correctly)
View 4 Replies
View Related
Mar 17, 2012
I have an E2500 router. When I enter 192.168.1.1 as a web address I am asked for a User name and password. When I do not enter anything for user name and put “admin” in password the screen again asks me for the same two things and eventually goes to a 401 message.
When I enter admin in user name and my secure password to allow devises to connect to the network it lets me in. I thought the password to enter the system settings and the one to enter the network are usually separate. When I open the Cisco Connect program and go into the various menus there my “secure” password is written and visible for anyone who clicks it. Is this how it is supposed to work?Also, how do I occasionally change the password to enter into the network.
View 6 Replies
View Related
Dec 11, 2012
How do I change the ssid network name on my dell laptop E6500 laptop?
View 1 Replies
View Related
Feb 6, 2012
As far as im aware the current set up of the network is two desktops connected to a router and the router is connected to a switch (i didnt assemble the network) Now what im trying to do is get onto the router so i can change the SSID for a wirless connection.i was told by the ISP i was to change my IP, DG and subnet from DHCP to a static setup they gave me, which i did. but when i go into the browser to access the net (and ultimatly put the IP into the adress bar to access the properties) the net connection fails and i cant get on. when i change back to DHCP the net works again but i cant configure the router with this IP because the company has forgoten the admin/password.
View 2 Replies
View Related
Mar 12, 2012
Motorola SBG6580, How do I change the SSID?
View 1 Replies
View Related
Jun 7, 2011
How do I get into the westell 7500 menu to changed the ssid
View 5 Replies
View Related
Dec 6, 2012
I have an issue where I cannot get clients to change SSID. I have two SSID, one WPA2 secure, one open guest. The secure is locally switched via Flexconnect and the guest is centrally switched. Both of them work. I have been able to test this and both work as intended. The problem is that once you connect to one of them, either secure or guest, you cannot then change to the other. The only way to change is to delete the dhcp entry from the scope and then do it.
Fast SSID change is enabled. I also have debug client output from when the client fails when you try to switch which I will include below. I also pulled some wireshark captures and those show me that the DHCP ack packets are trying to give the client the ip address from the incorrect/previous scope. So basically it's like FAST SSID change is not working and the client is never being disassociated properly??
I am totally stumped and even though the client will most likely not be switched between SSID that often I would still like to know the solution.
Cisco 5508 running 7.2.110.0
Cisco 3502 LWAPP
windows server 2008 dhcp server
[Code].....
View 5 Replies
View Related
Dec 31, 2011
I cannot find the screen in the interface at 192. Where is this? Please don't say use Cisco Connect disc.
View 1 Replies
View Related
Sep 12, 2012
We are using cisco 3502i AP's and 5508 controler. We have two SSID's. "SA Wireless" and "Guest Wireless". SA Wireless is WPA2 enterprise security and the "Guest Wireless" is open. The iPads will disconnect from "SA Wireless" and join "Guest Wireless" at random. Is there a way to force them to stay on "SA Wireless" and only change if you actually tell the iPad to change?
View 1 Replies
View Related
Dec 23, 2012
what the ssid password is netgear 600
View 3 Replies
View Related
Jun 9, 2012
I have logged into the admin area 192.168.... And I do not see where to change the SSID.
View 2 Replies
View Related
Oct 15, 2011
Been using the WRT160N for a while now and it works great except for one issue. Every few weeks the wireless can't be accessed by the other computers unless I change the SSID name. It was frustrating to figure out, but simply changing the name makes it accessible again.
View 1 Replies
View Related
Jul 8, 2011
i bought a WRT160N router
I connected the Router to the modem, and all the wired connected PCs were working perfectly.But then, i went to the setup page to configure the Wireless settings, and as soon I changed the SSID name, the connection internet connection droppedThe only way i had to fix this was by making a Hard Reset.after that, I also tryed changing values and settings from all the configuration tabs, and the wired connection was working properly, but as soon i changed any value from the Wireless tab, the internet connection dropped (even, in the diagnostics section, i could not do a ping to google. It says unknown host).
View 3 Replies
View Related
Mar 27, 2011
In the past couple of years, I've picked up a couple of Linksys WRT54G routers for a buck or two at flea markets. I hadn't thought about the fact that no assigned SSID or Password came with them. I downloaded the Linksys set-up files from their website and recently set up both of them for relatives. They work great but they are "unsecured networks". I'd like to change that.
View 2 Replies
View Related
Mar 2, 2013
I have a new laptop and had a dlink DIR601 installed on an older laptop. I wasn't the one who got it set up originally but they did have me write down my SSID, password and security key. The dlink came with a cd but there is no cd rom on this laptop. I have tried reset, on line download (which only let me do the revisions). I have talked to a few people and they say it's easy!
View 1 Replies
View Related
Jun 30, 2011
If you have two wireless routers on the same private network. On configuring the second router's password and SSID I know the second wireless routers DHCP must be turned off.Can you explain step by step on configuring the second wireless. Must the second wireless be connected to the internet. If yes, how? Must I take the first wireless router off the modem and connect it to the second wireless router for internet connection. (Problem with that is connection from the ISP)
View 2 Replies
View Related
Oct 21, 2012
I am trying to get my printer to be able to use it from my phone and I need the SSID and then the password and Idk them.
View 2 Replies
View Related
Dec 18, 2011
I just purchased an E4200 and got it up & running. Everything was fine, until I connected a Wi-Fi DVD player to it. I followed the DVD player procedure, which was to push the WPS button on the router, and then the appropriate button on the DVD player. After a few seconds, the player connected, and I successfully accessed YouTube through it.
So far, so good -- except that it turns out that the router, on its own, changed the SSID and password. When I could not get Wi-Fi access on my iPhone, I checked the Wi-Fi settings, and instead of the original SSID of the E4200 -- let's say ShadeTree -- it was changed to Cisco_WPS_xxxxx (the X's represent numbers). I started Cisco Connect, and a screen came up showing that the password had been changed from the original, and listed both the original and new passwords.
What is going on? Why would the E4200 change the SSID and password all by itself, when I connected a Wi-Fi equipped DVD player with WPS? Is this going to happen when I connect a Wi-Fi equipped TV set, or some other component? What can I do to keep the E4200 from changing the network name and password all by itself? Or am I going to have to re-program every other Wi-Fi device (iPad, iPhone, etc.) every time I add a new component?
View 6 Replies
View Related
Jul 3, 2011
i set up the WAP4410N and it can be connected with our router. But it's not protected by our password, but once i have set the password of WAP4410N by changing the security mode to WEP, now i will prompted to password when I connect the AP, but it shows limited connectivity, I can't even access my local LAN resources at all.
View 2 Replies
View Related
Oct 3, 2012
Been a while since I have conf'd a controller. I believe its WLAN/edit/security/layer2 and below psk format edit the password?
View 2 Replies
View Related
Aug 26, 2012
Where do I find the router SSDI and password. I am trying to reinstall Linksys E1200
View 2 Replies
View Related
Feb 2, 2013
I am setting up a guest WLAN network on our existing 1242 AP's using a seperate VLAN. On most wireless devices which are on the company network/VLAN's, I have used WEP authentication with hex keys, and no broadcast. Obviously this cannot be the same for a guest internet connection.We want to have the VLAN/SSID in guest mode (which i have configured) for broadcasting, and then once someone selects the SSID on their laptop or smart phone, they are just prompted to authenticate with a standard alphanumeric password (example "guestwifi") instead of a 40 or 128 bit key.
I have searched all over and tried multiple things in the CLI on AP1, but can't seem to get anywhere.
View 4 Replies
View Related