Losing Network When Some PCs Try To Connect Wireless?
Jun 15, 2012
I've got a linksys router with two desktops running on it fulltime. One is hardwired (Win 7), the other is wireless (Vista). Normally, they have no problems with connecting. But I just got a laptop (Win 7) that is causing the whole network to go down for about 15-20 minutes then it will come back up for all my PCs but still drop out sporadically causing another 15-20 minute wait Both my desktops are unable to connect during this time. I also just got an old refurbished XP laptop from work, and it connects flawlessly. Then we had a friend come by and try to connect to our network and her laptop had the same problem.
View 3 Replies
ADVERTISEMENT
Mar 28, 2013
lose network connection on htc one v. At settings, mobile network says radio turned off. Could I have done something to cause this. I`ve had this phone for 4 months. This problem just started.
View 2 Replies
View Related
Jan 7, 2013
I have been using DIR 615 at home for around one year. Now I notice that after some time of continuous usage (say around 3 4 hours) the Wireless network is lost. Thereafter only reboot brings it back. I checked for any latest firmware upgrade from admin page, but it says device already has the latest.
View 7 Replies
View Related
Sep 7, 2011
our autonomous 1252APs. It loses network connectivity irregularly and ends up disconnecting everyone. It may stay up from a few days to a few weeks. I don't see any log messages that give any clues to why it is doing this. We have 30 of these working worldwide (on the same software level and same config) and this is the only one having the problem.
Things I have tried: Changing software levels - there is a code level where it didn't seem to have this issue, but I can't run it because then I'm unable to monitor it in our monitoring system. Swapping out wireless access pointsRe-terminating the cable on the AP side, it was really difficult to get the network cable into the AP while swapping it outBlocking a company test piece of equipment from connecting using the mac address filtering (it connects with one of their test IPs - weird) – I still see it connecting though I don't see high utilization on the switch port when the issue happens I had a few cases open with TAC, and they were unable to find anything wrong - gave them sh techs of prior to the event and after the event. It was one of those where the tickets were open for a weeks with no updates.
View 9 Replies
View Related
Mar 15, 2013
I was using a netgear wndr 3400 and my network stream never failed. i bought a e4200 v2 and my tv loses streaming capabilities after about 10 to 15 minutes.i have to turn it off to get them back and then it does it again in 15 minutes. i know it is not the tv it wprked fine before the new router.
View 5 Replies
View Related
Dec 25, 2011
The issue is Windows7 (notebook ASUS N61Ja connected through Wi-Fi) loses and can not find again network HDD storage (Western Digital My Book Live 3TB). Rebooting of the notebook works but after I close HDD folder window the issue comes back. The issue exists only with Wi-Fi connection. Everything is fine using LAN connection.
View 1 Replies
View Related
Jun 2, 2011
Currently using a netgear WG602 wireless router which i use to connect to my 2nd PC and Iphone, with the Netgear router running from my main PC.I have recently been having trouble with my 2nd PC ad Iphone randomly losing connection and the only way for the connection to be reastablished is to reboot the wireless router. Once rebooted i am able to connect again to the internet with no problems, interestingly enough my main PC never loses connection. Also sometimes when i lose my connection and reboot the wireless router i will have a IP conflict pop up on my 2nd PC however i would i say i get this once in every 10 dissconects and not all the time. Sometimes i won't dissconect at all in a day but sometimes i may dissconect 5-6 times.
View 1 Replies
View Related
Nov 27, 2012
I have a problem with my home network (diagram attached below). I sporadically lose connection between my Router and the devices behind the switch. I have replaced the Ethernet cable between the 2 so I don't think the problem's there. It will work for a week or so, then just lose the connection. I then try a combination of rebooting all of the devices on the network and/or unplugging and re-plugging the cable connections and sometimes that works. It's a relatively new router, but can a router be "underpowered" for pushing a signa
View 2 Replies
View Related
Jan 7, 2013
For some odd reason l cannot connect to Router as keeps losing connection. I connect for a few secs then it loses connection. I can use my IPAD fine to connect to router. I have tried to use use both wireless dongle and cable to connect to ADSL router but no luck with both. I have check for spyware etc but nothing found. I get a cross on my network connectivity icon in network connections with control panel. I am using Windows xp xp2 patch , drivers and patches are upto date. Device drivers upto date also Netgear router?
View 3 Replies
View Related
Oct 17, 2012
Any problems with the guest network on the ea4500 with the cloud firmware? I am losing guest clients after about 24 hours and the re-authentication fails. you enter the guest password and nothing happens until you reboot the router.
View 2 Replies
View Related
Jan 30, 2011
My desktop is connected to the internet via cable modem, then to my laptop via network bridge between the LAN and wireless NIC, then through to the laptop via wireless ad hoc network.
The problem I'm having is that my laptop loses connectivity every 5 minutes, though it doesn't show a dropped connection. The desktop does not show any connections to the current network at anytime, however I still get connectivity on the laptop albeit only 5 minutes at a time.
I have, on both systems, disabled power saving for the wireless and wired connections; and also that they have the most current drivers.
It does not have to be idle to lose the connection either, I can be in the middle of something when it drops.
View 8 Replies
View Related
Sep 2, 2012
it shows that it is Online getting an Excellent Connection thru my Home Network... I go Online using Firefox with it at home.. stays up for a few minutes .. can get onto the internet...then loses the ability to stay connected.... it still states it's Connected though ... kind of baffling... like something is timing out then blocking it...I tried shutting down my AVG Anti-Virus.. also shut down Windows Firewall... it still continues to lose the Connection while stating it's connected getting a good signal... both of these are configured correctly as far as I can seeI've re-installed my Wireless driver thru the Acer Recovery Management included on the Netbook.. still no good..
View 2 Replies
View Related
Nov 15, 2012
I have an Acer 7750G, running Windows 7,connected to our home network using a Dynex router. At the moment this is the only laptop in the house that is having problems with connectivity. Starting yesterday, it only connects intermittently. When I run diagnostics, it says the following problems have been fixed but it either solves the problem for a few minutes only or not at all: "Problem with wireless adapter or access point" or "Default gateway is not available".
IPV6 connectivity also shows 'no internet access' and sometimes IPV4 reports no internet. I've unplugged and rebooted the modem and router a few times but that hasn't solved the problem.
Edit: I ran troubleshoot again, and it says the following issue is not fixed: "Wireless Network Connection 2 does not have a valid IP configuration".
View 14 Replies
View Related
May 17, 2011
I have 2 older xp pro tough books that connect to my domain via a pair of versa vx 400 access points. automobile technicians use these computers to communicate with cars via a separate wireless card and WiFi device (SPX MVXI) that broadcasts a wireless signal.they always connect just fine to the network but sometimes they drop there connection and don't rejoin which screws up my scheduled tasks (nightly upload). They will reacquire the connection every time if i select it again manually in the windows wireless config.here is what I have done so far
1. set up exclusion range in DHCP distribution on my DC
2. set the laptops up with static IP's within the exclusion range.
3. configured the laptops to auto connect to the network even when its not broadcasting
4. set the access points on channel 7, and the devices on 1 and 11.
I have done a lot of research on this issue, a rep from versa told me that Intel proset wireless isn't very compatible with there product which i this is BS since it does the same with with the netgear WiFi PC cards.
View 11 Replies
View Related
Jan 31, 2011
I'm trying to figure out what's wrong in a LAN having 70 computers.There are three routers in the same subnet with three switches (kinda crappy). DHCPs are off.The problem is that randomly the routers are losing their configurations or the network hangs a lot. There is no problem in the routers (tested many times).The thing is that when i start packet sniffing over the network using wireshark there's a big flood (over 10.000 packets in a sec) coming in a internal ip inside the network ex. 192.168.1.60.Next thing is that when one of the routers shuts down manually, the other one is losing it's config. Today, when i went to check 192.168.1.60 i saw the power plug was not connected, when i re-plugged it the flood was gone. (the computer was turned off).I enabled SPIs / firewalls in all of the three routers and there is no problem yet.
View 5 Replies
View Related
Jun 15, 2011
I have three computers on my network. Two are wired and one is wireless. I continually run into the probably of getting a limited connection after the computer goes to sleep and I wake it up. I attempt to automatically correct it, but this doesn't work. I try to use the command prompt with ipconfig/release ipconfig/renew and it doesn't work. Then I try to disconnect the adapter and it doesn't work. I also reset the modem and the router with no resolve. Most of the time the only thing that works is restarting the computer. In addition I do use DHCP static addresses for the computers on the network. What is causing this and how do I fixt it without restarting the computer?
View 4 Replies
View Related
Sep 29, 2012
I am having a very frustrating problem with my new Dell XPS 8500's wireless connection - Dell Wireless 1703 802.11b/g/n (2.4GHz). Basically, I am losing my network connection every couple of minutes. The process goes something like this:
1) Not connected - Connections are available
2) My network disappears completely (yet all other local networks are still visible) for a matter of seconds then reappears
3) I try to connect and receive "Windows was unable to connect"
4) I press "Troubleshoot problems"
5) "Resolving problems", "Resetting network adapter", "Troubleshooting has completed"
6) Problem with wireless adapter or access point - Fixed
7) I am reconnected to the network/internet with a full 5 bars
8) Process repeats itself five minutes later
I have been able to come to a conclusion that is not the adapter, or the router, but some sort of compatibility issue as:
a) I have tried connecting to a different wireless network and it has worked fine
b) There are other systems in the household that connect to the network and are not experiencing the same issue
It is not a distance issue as router is 2 meters away from the adapter with nothing in between, the other systems that use the network are much further away.
What I have tried so far: - Changing the channel from "Auto" to a set number
The router is a Belkin N300 Wireless N.
View 12 Replies
View Related
Oct 27, 2012
I have Sky Fibre Optic Broadband, with a router supplied by Sky, (You can't use any other router, as username/password for internet is already put into router & they will not give you details when you phone them). The router they supply has only four Ethernet ports on. One is used by Sky to give you Fibre Broadband, thus leaving you with three.I have five devices that must use Ethernet, as they do not have wireless.How do I get more Ethernet ports available to use, without losing the Sky router, as Sky will NOT let you use any other router.
View 10 Replies
View Related
Jun 28, 2012
We are running Sharepoint 2007(sp3 and wss sp3) on a dell pe2950 running Server 2003 std x64 sp2, 4 146gb 15k sas raid 10, 16gb ram, dual xeon 516 3ghz. the network card is a quad port intel 1gb pci-x server nic. Was running broadcom net xtreme dual port onboard, and had the same issue.
We are losing partial network connection, after about 14-15 hours of the machine working correctly. What happens is that it cannot ping, or access, any machines not on the same network segment(this machine is on 192.168.3.* and cannot access machines, or be accessed from 192.168.2.*, 192.168.4.*, etc, etc). what i have found is that when i try to ping 192.168.2.210(our dns, dhcp server). its times out about 20 times and replies 2-3 times, and then repeats the cycle all over again. i have done a winsock reset on the machine, and sometimes it starts back up and works again, sometimes it doesn't.
View 3 Replies
View Related
Dec 26, 2012
There are 3 laptops in my house including mine, and i keep losing network/internet access every couple of minutes so I have to go to the router, unplug the device, and plug the device back in every couple of minutes, usually 10-15, although it varies, and the same has been going on with the two other laptops, so it's not just my laptop.
View 1 Replies
View Related
Mar 30, 2011
I have a Windows 7 PC and a Windows XP PC that I’m sharing files on. All was well for a while, but I’ve started to lose connectivity between computers when one goes into sleep mode. Not sure at this point if it’s the XP machine or the Windows 7 Machine that’s causing the problem.
View 3 Replies
View Related
Jul 5, 2013
i have a Dell Inspiron 1440 notebook and it keeps either shutting off the wifi or losing the connection to the network i have replaced the WiFi card with a new one and tried a couple of other settings and it did great for a week and now its doing it again and also it doe's not go to sleep when you close the lid and i have it set to do that .
View 20 Replies
View Related
Oct 12, 2012
I have an Inspiron 1520 which, approximately once per day, is losing the network connection. Basically I can be right in the middle of something then all of a sudden anything internet related (eg browser, email, skype, other software) stops working, and then a few seconds later the little globe disappears from my network icon at the bottom of my screen.
The only way to get my connection back is to reboot my computer. I've tried the "repair connection" tool, but that doesn't work. I've tried waiting, but that is futile (and impractical)
This happens whether I am directly attached to the router via cable, or I am going through wireless.
Other devices are unaffected at the time. It is only my computer that loses the connection. The two phones, two other laptops, desktop and tablet all remain connected. (Hmmm - I seem to have far too many devices!)
Do I have a failing part? Or is this maybe a software issue? I'm thinking perhaps it is software because after a reboot everything returns to normal and the problem tends to go away for 24 hours or so.
View 3 Replies
View Related
Nov 27, 2012
I have recently purchased a RVS4000 router and am experiencing major downtime.Almost everyday the RVS4000 router losing internet connectivity. I noticed that when this happens I cannot login into the router from my pc which is connected to the RVS4000 network.The only way to restore connectivity is to restart the RVS4000 by disconnecting power and powering back up.The router's WAN is connected to my Cable modem.The RVS400 has two PC connected to it. (port 3 & 4) I have a Cisco 8-port switch connect to the RVS4000 with 3 additional PCs/devices on it.
View 6 Replies
View Related
Sep 19, 2012
My company just assumed management of a remote entity. The network has several misconfigurations and I need to make some network modifications from my office w/o losing access or incurring lengthy outage to the clients. The network consists of 1721 router and three 2960 switches.
- I only have access to the router from the Internet. I telnet off the router to the 3 switches.
The site uses a single class C 192.168.1.0 / 24. The router is running RIPv2 even though this is the only network. The prior network person (contractor) set up separate native vlans on each switch and all the ports are defined as Native trunk and access are defined to the VLAN interface assigned to the switch. So of course the logs are flooded with Native VLAN mismatch, Each 2960 switch is a VTP server but has no VTP domain.
basic network layout:
Internet => Eth [Cisco 1721] => Fa 0 192.168.1.254 ==> [SW1]
[SW1]
interface Vlan1
no ip address
no ip route-cache!interface Vlan220ip address 192.168.1.219 255.255.255.0no ip route-cache
[code]....
!interface GigabitEthernet0/1description SW2 Gi0/1switchport access vlan 204switchport trunk native vlan 204!interface GigabitEthernet0/2switchport access vlan 204switchport trunk native vlan 204!interface Vlan1no ip addressno ip route-cache!interface Vlan204ip address 192.168.1.224 255.255.255.0no ip route-cache Normally, I would assign the current 192.168.1.254 to a subinterface to Router Fe 0/0 but with each switch having its own native VLAN I am afraid I will lose connectivity to the downstream switches -- my only access is telnet off the Cisco1721 Router.
View 3 Replies
View Related
Mar 30, 2011
Noticed the last couple days that pages weren't loading on my laptop. Looked at the network status for the laptop and noticed that my network speeds would fluctuate from 54Mbps to 1Mbps, and various speeds in between. I had never had this happen before (I've had this router, a Linksys, for about 6 years). I thought maybe something was going on with the laptop. Grabbed my wife's laptop and she had the same issue. So, I checked the wired towers - their speeds are running at 100% all the time, no fluctuation. So, it has to be something with my router, but I'm not familiar with how to diagnose, etc. The router has a 3rd party firmware (DD-WRT) flashed on it, in case that matters. But I've had that on there about 4 years, nothing new. I've done a DHCP release and renew.
View 14 Replies
View Related
May 30, 2012
So my boyfriend and I just moved and, after struggling with our old wireless router we haven't used in years (pretty sure it was dead), we bought a whole new one in the hopes that starting from scratch would be simpler. It's a Netgear and we were aiming to hook up three devices through it; my laptop, his computer, and our Xbox 360.
He hooked it up no problem and we were using wifi for our computers and one ethernet cable through the router into the Xbox, peach as pie... Except my Toshiba laptop decided to rebel and allow me to use the internet for about five minutes before claiming there's "no internet." The signal says excellent and the little alert symbol keeps appearing and disappearing, but no pages will load. I tried running troubleshooting, but it couldn't identify the problem. Shutting down my laptop and turning it back on seems to be the only way to get it going again for another five minutes until the cycle continues.
View 2 Replies
View Related
May 1, 2012
Im having problems with some toshiba laptops that arnt showing the SSID for some wireless points in the school. We have had the waps set up with the same ssid so we can walk around and the laptops will connect from one to the other. Its been like this for sometime however some new laptops we have got running windows 7 pro show some of the waps up as "other network" - File attached. The actual SSID on ALL waps is Peel Park WiFi Therefore it keeps losing connection to the wireless points and wont connect to some.
View 5 Replies
View Related
Oct 8, 2011
I am running the below rig and connecting wirelessly via my DSL Router to my Blu-ray player which is connected via HDMI to my TV. Using Windows Media Center I have been recording shows via an OTA antenna. They are in .wtv format and going on the 500GB HDD. Playing these files on my TV has been going well until this week. During playback we frequently lose the connection. I have tried power cycling the router and the player, re-entering my settings in the player and connecting via Cat 6 cable. The only clues I have are that I recently did a second firmware update on my player (did not occur immediately after that) and I sometimes get the following message on the computer... Media Foundation Protected Pipeline EXE has stopped working.
[code]...
View 1 Replies
View Related
Mar 5, 2011
It seems to happen only when connected through our rooms or through wireless. When I connect directly to the router I don't lose connection. The router is downstairs and it routes the wired connection through a switch. So when routing through the switch or using wireless the connection is lost and re-connects about every 30 seconds to 1 minute. When directly connected it works fine. I've reset the router and reset all settings twice and nothing. I'm using 10/100. Not sure if any of this matters. I have also updated the firmware to 1.35NA. PPPOE password and username are correct as they have been given by our ISP. Any settings I should be aware of? Everything is pretty much default. All I do is setup the internet connection and then setup a wireless connection. Are we overloading the system maybe? I've also changed the password a few times as well. Seems like the logs fill up really fast. Keep getting blocked UDP and TCP packets from different addresses.
View 3 Replies
View Related
Sep 12, 2011
linksys router problems Linksys wireless router connected to cable modem. over time router looses connection to internet. rebooting router reestablishes connection. running XP sp3 from laptop connected wirelessly?
View 3 Replies
View Related
Nov 5, 2011
I recently bought a iMac and it has been fine apart from the wi-fi connection.It used to disconnect me for 2-4 minutes every now and then at first and then this died down, but recently it keeps losing connection altogether. When I go on run diagnostics it says that i have failed to connect to the ISP and internet.Is there anyway to fix this?,I use a Netgear router with an Apple iMac running with OS X Lion
View 2 Replies
View Related
Feb 9, 2011
i keep playing mw2 and when i go in to my screen it says that my signal goes green and then red like it jumps can you tell me what to do my intenet signal on my ps3 is 100% its just when i play this game
View 1 Replies
View Related
