NAS Drive And Resetting IP Address
Dec 22, 2011
I work for a company and I am currently trying to make some changes to the security on our NAS drive, (I will give specifics of the equipment we are using below). The NAS drive we have does have some security functionality on it however we don't have the username and password (it was set up before I arrived and now no one knows anything about it). I am able to restore the NAS to factory settings which apparently will not affect the content of the drive however it will in addition to resetting the password and username, reset the IP address.Now the concern I have is that once I have reset this, then will the computers which are connected to it be no longer able to access the drive which is essential for the business.
The NAS is connected to a switch which then feeds off via Ethernet to 8 separate computers (6 running XP, 2 running Windows 7), will this mean that when the IP address is reset the computers will lose access to the drive or will they be okay as they are still connected via Ethernet. If they will lose access what will I need to do to 'reconnect' them. [code]
View 3 Replies
ADVERTISEMENT
Jul 28, 2011
Currently my Version 2. linksys wireeless router wouldn't reset it's IP and will NOT connect to the IP listed in my ipconfig,
I'm paranoid that it's something I've downloaded... even though that I'm always careful not to get anything off mistrustful websites! As soon as I download Kill Bill for my gf everything just goes straight to.... ! Would a file even be able to dis-able a router wireless capability? None. of my computers are infected but this is still seriously questionable.
I press this **bleep** button daily for 30 seconds and nothing is reset. My default gateway will not connect and the IP from webpages that show users their IP fail
I'm not sure if I should update the firmware because even if I could my ip.... doesn't persist
View 4 Replies
View Related
Dec 13, 2012
if it is possible to map a network drive by IP address.
View 1 Replies
View Related
Mar 17, 2011
My WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
View 3 Replies
View Related
Mar 19, 2012
I'm currently in college, and do most things with my laptop, and I have wifi just about everywhere. It has a generous 500 GB of storage, but I'd like to store non-essential files on, an external hard drive. However, lugging around 3 TB of storage isn't exactly feasible, and with my experience with my current 1.5 TB portable drive, me running around everywhere with it bouncing in my bag is just going to abuse it until it stops functioning (which it has...)[URL]
View 3 Replies
View Related
Sep 15, 2011
I'm trying to share my drive thats on my desktop PC to my Netbook. But I want it to show up on my netbook like a local disk drive. Is this possible? Would I need a software for this and if so which one?
View 1 Replies
View Related
Oct 10, 2011
i bought Tata photon plus data card around 5 months back. But now i moved from tata photon plus to reliance net connect coz of its poor service . My friends tell me that i can use my old data card as pen drive. what i should do to use my data card as pen drive.
View 3 Replies
View Related
Jun 5, 2011
what is the difference between network drive and map drive?
View 1 Replies
View Related
Jun 8, 2012
I am currently using a backup program that I thought would back up from any location including a NAS drive but this is not the case. The backup program does not show the NAS drive directory... I was just wondering if there is a way of making a NAS drive appear as a local drive. I've mapped the drive and created symbolic links for it as well and it still does not appear. I was planning on using the iSCSI method but I believe my NAS does not support it.
View 2 Replies
View Related
May 25, 2011
I have to keep restting my wep key password for my wireless lap top to access the router. It stays logged on for some time but then is looged off the internet. I have to reset the wep key using my desk top PC and each times the default setting is NOT the password I use. after resetting the lap top recognises the web and I can gain access again. Howver this cycle keeps repeating itself!!! Do I have a hacker who keeps resetting my wep key for their own use?
View 2 Replies
View Related
Jul 18, 2011
We have an ASA5510 which keeps resetting itself for no apparent reason. It does this several times a day and I cannot see any pattern to the times etc. I don't believe it is load related as it also happens overnight when very little is going through the device. When it happens the device just drops off the network (all interfaces) and then when it comes back a few minutes later we can see from the system uptime that it has in fact rebooted itself.I initially thought it was faulty hardware, so I swapped the device for another 5510, but that does the same thing. I then added a third 5510 and configured it in with the second one as an Active/Passive failover pair. Both devices do the same as the first, the only differences now is that the passive device kicks in and takes over, so we have a little less service disruption each time.
View 9 Replies
View Related
Dec 13, 2012
Alright so, for the past few weeks, the modem has been resetting itself, by that I mean, I am browsing the net/playing something, then the four lights turn into 1 blinking.. then 2 blinking.. then 3 blinking.. then return to 4 lights and I get my connection back, this is happening every 5-10 minutes and terminates game sessions.
View 1 Replies
View Related
May 11, 2012
is there a way to disable reseting SMC router
View 1 Replies
View Related
May 6, 2011
Recently, whenever I download something my internet will just crash for a second, I think it may be realted to my router because the internet light on my router changes from the connected state (solid blue) to the connecting state (flashing orange) at the same time. The router I use is a belkin router and I have access to its gateway using my internet browser. recently reformatted my c drive to fix a bsod on this pc, before this reformat this problem did not exist.
View 5 Replies
View Related
Feb 2, 2011
I'm trying to get an MBR1000 Cradlepoint 4G router working, but every time I plug the 4G aircard in, the router constantly resets itself about every 10 seconds or so. If I take the aircard out, the router is fine (of course doesn't have internet connection), and I can plug the card into a PC and it works fine. I talked to Verizon, and they told me that the air card that we DID have wouldn't work with a router, so they exchanged it and gave us a newer one. The 4G card is the Pantech UML290. I've tried everything I can think of, including updating the firmware on the router (and the router's 4G firmware), I've reset the router to default settings in case a setting got messed up.The guy at Verizon told me that I should basically be able to plug it in and have it work.
View 1 Replies
View Related
Apr 10, 2013
i have a trendnet tpe-s44 switch and i need to reset it. it is installed in a network with a pos system, and i need to change the security from wep to wpa-2. i also cannot use the web interface to get to the login screen. from what i gather, it should be admin admin at 192.168.0.1, but the network it came from had a 192.168.5 scheme. i also cannot find a reset button, i even took it apart to look for jumpers. that sucks, i can configure a cisco from the command line almost in my sleep
View 14 Replies
View Related
Aug 28, 2011
For the past 3 days, my connection to the internet has been resetting itself. I get the following message: The connection to the server was reset while the page was loading.
* The site could be temporarily unavailable or too busy. Please try again in a few minutes.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the web.
Now, this happens with only certain sites. The sites it mainly happens to are Playlist.com, MyYearbook.com, and Vampirefreaks.com. I can be on youtube and facebook, and it will be perfectly fine. But once I go to one of the other 3 sites, I get that message, and it completely makes me incapable of browsing the web. I'm forced to close out of everything, and wait at least 5-10 minutes. I've looked around seeing what could be the problem. I've deleted cookies, cache, temporary internet files. I've made sure Firefox was permitted to access the web; used a different browser. I even did system restoration, but all it did was take me back exactly 3 days ago, when the problem first began.I use a lap top, called Asus. It's a 64-bit, Windows 7 operated. I connect to my parents' internet. Our service provider is Comcast. We called them to see if they were having a problem and they said no, everything was perfectly fine on their end; and they refreshed the modem.
View 1 Replies
View Related
Jun 6, 2012
How do you resett an IP address for Win 7
View 1 Replies
View Related
Mar 21, 2011
I just got Charter cable internet and decided to purchase my own cable modem instead of paying 5 dollars a month to rent one. I got a D-Link DCM-201. I know it is a little old but it was brand new/unused so I figured it would work out well. Ever since we got it hooked up every few hours we lose internet connectivity. The power, cable, and status lights are solid green and the Ethernet light is blinking green. The only fix I have found for this is to power cycle the modem. The problem is this happens about once every 4 hours...having to reset the router every few hours is making having cable internet a much more painful experience than it should be.
View 7 Replies
View Related
Jul 3, 2011
Well the model of my linksys is in the title so If you need It have a look at the title, so what I wanted to know was, what exactly does resetting my router do (be as detailed as possible) Is It hard to reset a router? and do you think that in my case resetting is necessary.
I forgot my wpa key, also my default password Is not "admin" I'm pretty sure I changed it after I got my router.
View 1 Replies
View Related
Mar 21, 2011
I added a VOIP fax line to my network and in doing so, was forced to reset my router, as it would not go on-line. Now the printers are all off line and I can not get them back online. I followed instructions within admin and it did not work. My network is a 2 computer network. My computer acts as server and then one other computer.
View 2 Replies
View Related
Dec 1, 2012
I have a Netgear WNR1000v3 router that I just reset to factory defaults, and now when I run ipconfig /all it doesn't show up as having a gateway. Note that I am connecting with a laptop wired in to a LAN port on the router. (also tried on WAN port) Here is what shows up:
SpoilerEthernet adapter Local Area Connection:
View 1 Replies
View Related
Aug 6, 2011
I have Charter Communications Internet Service the 18MB Service. All Day today the Modem kept Resetting itself as if I had the modem plugged into a lightswitch, Called Charter and they gave me the run around. Im leasing this Cable Modem / Router all in one from them, its a Ubee DDW3611 Docsis 3. Here are the Event Logs as well as my Signals Right here,
[code]....
View 1 Replies
View Related
Dec 14, 2012
im trying to do is reset my wifi password so that i can get internet for my moms new lap top.
i have a sb5102 cable modem and i need to change the password , how do i do that??
View 1 Replies
View Related
Dec 19, 2011
I have a wireless ADSL, D-Link 2640U. I was doing some configuration on it and immediately the control panel disappeared. I am trying to log in it is refusing. I have try to reset, it is not resetting. Network is working, but no internet because I have not yet configured it for the internet. When i use it's cd, it reaches to the point of detecting it and telling me that "The router is off or a cable is not connected" Though it is on and the cable is fine i have tested it in different routers it works well!
View 1 Replies
View Related
Apr 5, 2011
I noticed that I'm unsecured what happened We have had many power outages and do not know how to get my WEP code back in do I reset and do all over again Surly their must be an easy way I don''t know?
View 1 Replies
View Related
Sep 21, 2011
This summer the IT department at my location rolled out a little more than 100 AIR-CAP3502I-A-K9's to much success. We have had an issue with only one AP. This paticular AP must have gotten unplugged during the updating process after the initial conneciton to the controller was made as the LED currently blinks red-blue-red, indicating an error in the flash memory according to the manual.
View 2 Replies
View Related
Jan 29, 2013
I would like to empty my LMS 3.2 DB and re-discover all of my devices again. What is the best way to do this besides wiping the software and reinstalling?
View 1 Replies
View Related
Jul 17, 2011
We have an ASA5510 which keeps resetting itself for no apparent reason. It does this several times a day and I cannot see any pattern to the times etc. I don't believe it is load related as it also happens overnight when very little is going through the device. When it happens the device just drops off the network (all interfaces) and then when it comes back a few minutes later we can see from the system uptime that it has in fact rebooted itself.
I initially thought it was faulty hardware, so I swapped the device for another 5510, but that does the same thing. I then added a third 5510 and configured it in with the second one as an Active/Passive failover pair. Both devices do the same as the first, the only differences now is that the passive device kicks in and takes over, so we have a little less service disruption each time.
View 3 Replies
View Related
Mar 20, 2011
my new dlink router 655 was working great when I hooked it up to my desktop computer that was running vista windows and my hp notebook that runs windows 7 ultimate was working just fine too, but when I downloaded windows 7 ultimate to my desktop I lost my internet connection. after resetting it I got it back and I thought everything was fine, but now I have to reset it every few hours.
View 2 Replies
View Related
Feb 26, 2013
we hadn't have the WEP key on our Linksys wireless router, so we decided, about a month ago, that it was a good idea to lock our wireless connection. So we did. For a couple of weeks, everything worked just fine.But then we bought a new printer, which happened to be a wireless network printer, and in the process of installing it, we mistook the reset button (I think) on the router for some other button and ended up resetting the router. When we did that, we undid WEP key, thereby unlocking the router. Then, we locked the router again, at which point one of our computers--which happens to be mine--ended up not working. All other computers and phones and iPads work just fine, but this one laptop of mine just doesn't work (with respect to wireless internet connections, of course).
- pressing the reset button on the router again. It kind of works. The internet works for about five or ten minutes (which is unbearably annoying because I have to reconnect it every five minutes), but my computer somehow disconnects itself from the internet connection. Also, although the internet technically "works," the wireless network icon thing on the bottom right of the screen has an "X" on it, which I thought meant the internet is not working, but it apparently doesn't, because my internet is working now. And, if I click the icon, it says that I'm not connected, but, again, the internet works. (for about 5~10 minutes, if I unlock the router)
- changing the internet protocol information (I don't think it does anything, but.)
- changing the wireless internet connection property to WPA, WPA-PSK... everything.
*All computers in the house have wireless internet connections but mine.
*When I reset the router, the internet works, although the computer says it isn't connected, and it disconnects itself every 5 or 10 minutes.
View 2 Replies
View Related
Jul 27, 2011
I had to send my HPg61 laptop in to check out a heat issue a few months ago. When it came back, I got a headphone jack issue (now resolved) and a Wi-Fi problem - I used to have great wifi from my bedroom to my parent's study which is where the modem is, even when I did have the heat issue, but when I got it back, that all changed.From my bedroom, my laptop would say "no connection detected" and had a red x over the wifi icon in the taskbar, but would have good connection if I were in the living room with it. This didn't last long - one day, the icon turned into a computer with a red x over it.
View 1 Replies
View Related
Nov 9, 2011
I usually get a solid speed of 2.3MBss yet today I am getting only 500kb/s I have reset my router 3 times, and my computer twice. Why is it happening?
View 1 Replies
View Related
